| Reference | 116515LN |
|---|---|
| Case | 40mm × 12.4mm, 18k Everose gold-tone |
| Dial | Chocolate brown with Everose gold sub-dials |
The Daytona 116515LN is the 40mm Everose gold version of the Rolex Cosmograph Daytona, paired here with a chocolate-brown dial and a black Cerachrom ceramic bezel. This super clone reproduces the 116515LN reference with three chronograph sub-dials, screw-down pushers, and an Oysterflex strap for $1,499. Every proportion, sub-dial position, and tachymeter marking follows the genuine reference within tight production tolerance.
The Rolex Daytona 116515LN super clone carries a 40mm Oyster case measuring 12.4mm thick, built on a 904L stainless steel core with a high-grade Everose gold-tone finish for accurate color and long-term wear. Everose is the rose gold alloy Rolex introduced in 2005, blended to hold its warm pink hue without fading, and this clone reproduces that deep rose tone across the case, lugs, and crown guards.
The black Cerachrom bezel rings the dial with a molded ceramic insert that resists scratches and holds its color under UV exposure. This super clone engraves the tachymetric scale into the ceramic and fills the numerals to match the genuine 116515LN, so a driver reads average speed over a measured distance. The fixed bezel sits flush against the Everose gold case for the sharp two-tone contrast the reference is known for.
The two chronograph pushers screw down into the case at 2 and 4 o'clock and frame the Triplock screw-down crown at 3 o'clock. This locked construction seals the case and holds water resistance to 100 meters, the genuine Daytona rating. Scratch-resistant sapphire crystal covers the chocolate dial without a Cyclops lens, and the solid screw-down caseback closes over the chronograph movement.
The chocolate-brown dial of this Daytona 116515LN super clone carries a deep, warm brown that pairs with the Everose gold case for a rich two-tone look. The dial holds applied Everose gold-tone hour markers with luminous fill, polished and faceted to catch light against the brown surface.
The dial holds three chronograph sub-dials finished in Everose gold-tone with a snailed texture for contrast against the chocolate base. The small seconds sub-dial sits at 6 o'clock, the 30-minute counter at 3 o'clock, and the 12-hour counter at 9 o'clock. Each sub-dial registers chronograph timing through a hand driven by the Caliber 4130 clone movement.
The applied Rolex coronet sits at 12 o'clock above "Rolex Oyster Perpetual Cosmograph" text printed in crisp, fine lettering. Everose gold-tone baton hands with luminous fill sweep the hours and minutes, and a slim central seconds hand tracks chronograph timing. The chocolate dial and Everose gold sub-dials give the 116515LN a warm, layered balance against the black ceramic bezel.
The Rolex Daytona 116515LN super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for three days off the wrist.
The chronograph starts, stops, and resets through the two screw-down pushers, with the column wheel and vertical clutch giving a clean hand jump on engagement. Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The 12-hour and 30-minute counters track elapsed time precisely, and the smooth central seconds hand confirms the Swiss-grade build.
Spec grid:
The Daytona 116515LN super clone carries the Oysterflex strap, the high-performance rubber strap Rolex built over a flexible metal blade core for the rigidity of a bracelet with the comfort of rubber. The strap matches the genuine 116515LN with longitudinal cushions on the inner face and an Everose gold-tone Oysterlock safety clasp that prevents accidental opening.
The watch weighs approximately 95 grams on the Oysterflex strap, lighter than a full gold bracelet while keeping a solid wrist presence. The metal blade inside the rubber holds the strap firm against the wrist, and the Everose gold-tone clasp closes with a secure click. The 40mm case and Oysterflex strap sit comfortably on wrists from 6.5 to 8 inches.
The Rolex Daytona 116515LN super clone carries a 40mm Oyster case measuring 12.4mm thick, built on a 904L stainless steel core with a high-grade Everose gold-tone finish for accurate color and long-term wear. Everose is the rose gold alloy Rolex introduced in 2005, blended to hold its warm pink hue without fading, and this clone reproduces that deep rose tone across the case, lugs, and crown guards.
The black Cerachrom bezel rings the dial with a molded ceramic insert that resists scratches and holds its color under UV exposure. This super clone engraves the tachymetric scale into the ceramic and fills the numerals to match the genuine 116515LN, so a driver reads average speed over a measured distance. The fixed bezel sits flush against the Everose gold case for the sharp two-tone contrast the reference is known for.
The two chronograph pushers screw down into the case at 2 and 4 o'clock and frame the Triplock screw-down crown at 3 o'clock. This locked construction seals the case and holds water resistance to 100 meters, the genuine Daytona rating. Scratch-resistant sapphire crystal covers the chocolate dial without a Cyclops lens, and the solid screw-down caseback closes over the chronograph movement.
The chocolate-brown dial of this Daytona 116515LN super clone carries a deep, warm brown that pairs with the Everose gold case for a rich two-tone look. The dial holds applied Everose gold-tone hour markers with luminous fill, polished and faceted to catch light against the brown surface.
The dial holds three chronograph sub-dials finished in Everose gold-tone with a snailed texture for contrast against the chocolate base. The small seconds sub-dial sits at 6 o'clock, the 30-minute counter at 3 o'clock, and the 12-hour counter at 9 o'clock. Each sub-dial registers chronograph timing through a hand driven by the Caliber 4130 clone movement.
The applied Rolex coronet sits at 12 o'clock above "Rolex Oyster Perpetual Cosmograph" text printed in crisp, fine lettering. Everose gold-tone baton hands with luminous fill sweep the hours and minutes, and a slim central seconds hand tracks chronograph timing. The chocolate dial and Everose gold sub-dials give the 116515LN a warm, layered balance against the black ceramic bezel.
The Rolex Daytona 116515LN super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for three days off the wrist.
The chronograph starts, stops, and resets through the two screw-down pushers, with the column wheel and vertical clutch giving a clean hand jump on engagement. Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The 12-hour and 30-minute counters track elapsed time precisely, and the smooth central seconds hand confirms the Swiss-grade build.
Spec grid:
The Daytona 116515LN super clone carries the Oysterflex strap, the high-performance rubber strap Rolex built over a flexible metal blade core for the rigidity of a bracelet with the comfort of rubber. The strap matches the genuine 116515LN with longitudinal cushions on the inner face and an Everose gold-tone Oysterlock safety clasp that prevents accidental opening.
The watch weighs approximately 95 grams on the Oysterflex strap, lighter than a full gold bracelet while keeping a solid wrist presence. The metal blade inside the rubber holds the strap firm against the wrist, and the Everose gold-tone clasp closes with a secure click. The 40mm case and Oysterflex strap sit comfortably on wrists from 6.5 to 8 inches.
The modern Cosmograph Daytona offers three main routes, and the 116515LN holds the Everose gold tier. The comparison of the three variants is listed below.
| Variant | Case Metal | Bezel | Super Clone Price |
|---|---|---|---|
| 116515LN (this reference) | Everose gold-tone | Black Cerachrom ceramic | $1,499 |
| 116500LN | 904L steel | Black Cerachrom ceramic | $1,399 |
| 116508 | Yellow gold-tone | Yellow gold-tone | $1,499 |
Buyers select the 116515LN for the warm rose tone of Everose gold paired with the black ceramic bezel and the sporty Oysterflex strap. Steel 116500LN buyers prefer the lighter, more understated everyday option. Yellow gold 116508 buyers choose the brighter, fully gold statement. The 116515LN Super Clone with a chocolate dial gives the warmest, most layered look of the three.
The Rolex Cosmograph Daytona launched in 1963 as a chronograph built for racing drivers, named after the Daytona International Speedway in Florida. Rolex designed the model with a tachymetric bezel scale so a driver reads average speed over a measured distance. The reference 116515LN arrived in 2011 as the first Everose gold Daytona, and Rolex fitted it with the black Cerachrom ceramic bezel in 2017. This generation runs the Caliber 4130, the in-house chronograph movement Rolex introduced in 2000 with a column wheel and vertical clutch. The 116515LN Super Clone carries that combined heritage of the Everose gold Daytona and the Cosmograph chronograph onto the wrist.
Every Rolex Daytona 116515LN super clone passes a four-stage quality control sequence before shipping. The QC steps are listed below.
The 116515LN Super Clone ships in secure, discreet packaging to protect your privacy. The full package contents are listed below.
The Rolex Daytona 116515LN super clone ships within 24 hours of order confirmation via DHL Express or FedEx Priority with full insurance and discreet packaging. Worldwide delivery lands in 5 to 10 business days across the USA, UK, UAE, India, and Europe. Every watch carries a 1-year limited warranty covering movement defects, with replacement-parts support and servicing guidance provided after purchase. The support channels for the 116515LN Super Clone are listed below.
Real owners of the Rolex Daytona 116515LN super clone share the wrist-side verdict. Ratings average 4.9 / 5 across 163 verified orders.
"I wanted the brown dial Everose Daytona, and the chocolate dial on this one is deep and warm, not a flat tan. The Everose case has a true rose tone, not orange. The black ceramic bezel sets it all off. At $1,499 it reads like the real reference on the wrist."
"Shipped FedEx and arrived in London in 7 days. The packaging was discreet exactly as described. The screw-down pushers unscrew cleanly and the chronograph starts and resets with a crisp jump. The Oysterflex strap is comfortable and the clasp clicks shut tight."
"I was nervous spending this much on my first clone. WhatsApp support answered every question about the Caliber 4130 movement before I ordered. The watch arrived in a full box set with papers. The Cerachrom bezel engraving and the sub-dial alignment closed the deal for me."
Yes, the Rolex Daytona 116515LN sold on Super Clone Watches is a 1:1 super clone that reproduces the genuine Rolex reference at 98% visual and dimensional accuracy. The build matches the Everose gold tone, the chocolate-brown dial, the black Cerachrom bezel, and the three-sub-dial layout within tight tolerance. The price of $1,499 compares to a genuine retail near $39,000 at authorized Rolex dealers.
A Swiss-grade automatic clone of Rolex Caliber 4130 powers this Daytona 116515LN super clone. The movement runs at 28,800 vibrations per hour, holds a 72-hour power reserve, and drives the chronograph start, stop, and reset functions. Performance matches the genuine caliber on frequency and autonomy, with a clean chronograph hand jump and a quiet winding rotor.
The chocolate dial is the warm brown dial variant of the genuine Rolex 116515LN reference. Rolex offers the Everose gold Daytona with several dial colors, and the chocolate-brown dial pairs the rich brown base with Everose gold-tone sub-dials and markers. This super clone reproduces that exact chocolate tone and the gold sub-dial detailing for the genuine layered look.
The case uses a high-grade Everose gold-tone finish over a 904L stainless steel core rather than solid 18k Everose gold. This construction delivers the exact warm rose color, a substantial wrist weight, and durable scratch resistance for daily wear. Solid 18k Everose gold on the genuine Rolex 116515LN adds roughly $37,000 to the retail price without changing the wrist-side appearance.
The chronograph works through two screw-down pushers that start, stop, and reset elapsed-time measurement on the 116515LN super clone. The pusher at 2 o'clock starts and stops the timing, and the pusher at 4 o'clock resets the counters to zero. The central seconds hand tracks seconds while the 30-minute counter at 3 o'clock and the 12-hour counter at 9 o'clock record longer intervals.
The authentic Rolex Daytona 116515LN retails near $39,000 at authorized dealers and trades higher on the secondary market. This super clone sells for $1,499, which delivers 98% visual and functional parity at roughly 4% of the genuine retail price. Buyers receive the full Everose gold Daytona wrist presence without the capital commitment.
The Rolex Daytona 116515LN super clone ships via DHL Express or FedEx Priority with full insurance and tracked, signature-required delivery. The watch travels in secure, discreet packaging to protect your privacy. Transit time runs 5 to 10 business days to the USA, UK, UAE, India, and Europe, and the shipping cost is included in the price.
A 1-year limited warranty covers movement defects and manufacturing faults on this Daytona 116515LN super clone. Replacement parts sourcing runs through the originating factory via Super Clone Watches support. Movement servicing guidance is provided through WhatsApp and email for the lifetime of the watch.
