| Reference | 116515LN-0003 |
|---|---|
| Case | 40mm × 12.4mm, 18k Everose gold-tone |
| Dial | White with Everose gold-rimmed sub-dials |
The Daytona 116515LN-0003 is the 40mm Everose gold version of the Rolex Cosmograph Daytona, paired here with a white dial and a black Cerachrom ceramic bezel. This super clone reproduces the 116515LN reference with three Everose gold-rimmed chronograph sub-dials, the tachymetric bezel scale, and the Oysterflex strap for $1,549. Every proportion, sub-dial ring, and pusher action follows the genuine reference within tight production tolerance.
The Rolex Daytona 116515LN-0003 super clone carries a 40mm Oyster case measuring 12.4mm thick, built on a 904L stainless steel core with a high-grade Everose gold-tone finish for accurate color and long-term wear. Everose is the rose gold alloy Rolex introduced in 2005, blended to hold its warm pink hue without fading, and this clone reproduces that deep rose tone across the case, lugs, and pushers.
The black Cerachrom ceramic bezel rings the dial and carries a recessed tachymetric scale for reading average speeds over a measured distance. Cerachrom is the corrosion-proof, scratch-resistant ceramic Rolex uses for its modern Daytona bezels, and this super clone reproduces the deep black tone with crisp molded numerals. The screw-down chronograph pushers sit at 2 and 4 o'clock around the Everose gold Twinlock crown, sealing the case for full water resistance.
Scratch-resistant sapphire crystal with anti-reflective coating covers the white dial and resists daily knocks for years of clear reading. The solid screw-down caseback seals the chronograph movement and holds water resistance to 100 meters, supported by the Twinlock crown and the screw-down pushers. The 40mm case and 12.4mm profile give the Daytona 116515LN its balanced sport-luxury proportion on the wrist.
The white dial of this Daytona 116515LN-0003 super clone carries a clean, even white that frames the warm Everose gold case and the black bezel with strong contrast. Three chronograph sub-dials sit on the dial, each ringed with a polished Everose gold-tone border that lifts the registers off the white surface. Applied Everose gold baton markers mark the hours, faceted to catch light against the bright dial.
The three sub-dials run the standard Daytona layout, with small seconds at 6 o'clock, the 30-minute chronograph counter at 3 o'clock, and the 12-hour chronograph counter at 9 o'clock. The central chronograph seconds hand sweeps the full dial when the chronograph runs, while the running seconds stay in the 6 o'clock register. Everose gold-tone baton hands carry luminous fill for low-light reading.
The applied Rolex coronet sits at 12 o'clock above "Rolex Cosmograph Daytona" printed in crisp, fine text. The white dial holds the dial-code identity, where the -0003 suffix denotes this white configuration with Everose gold sub-dial rings. The black bezel scale, the Everose gold registers, and the white base give the 116515LN-0003 a sharp three-tone balance.
The Rolex Daytona 116515LN-0003 super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for three days off the wrist. The Caliber 4130 clone drives the central chronograph seconds and both counter sub-dials through a vertical clutch for a clean start and stop.
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The chronograph pushers engage with a firm, defined click, and the central seconds hand starts cleanly without stutter through the vertical clutch design. The smooth sweeping seconds hand and the quiet rotor confirm the Swiss-grade build of this Daytona 116515LN super clone.
Spec grid:
The Daytona 116515LN-0003 super clone carries the Oysterflex strap, the rubber strap Rolex developed with a flexible metal blade core inside a high-performance black elastomer coating. The strap pairs the comfort of rubber with the rigidity of a metal core, and this super clone reproduces the same ribbed underside cushion system for airflow and a secure fit. An Everose gold-tone Oysterlock safety clasp closes the strap and prevents accidental opening.
The watch weighs approximately 110 grams on the Oysterflex strap, lighter than a full gold bracelet while keeping the substantial case presence of an Everose gold Daytona. The flexible blade core lets the strap follow the wrist contour, and the cushion system holds the case stable through the day. The 40mm case and Oysterflex strap sit comfortably on wrists from 6.5 to 8 inches.
The Rolex Daytona 116515LN-0003 super clone carries a 40mm Oyster case measuring 12.4mm thick, built on a 904L stainless steel core with a high-grade Everose gold-tone finish for accurate color and long-term wear. Everose is the rose gold alloy Rolex introduced in 2005, blended to hold its warm pink hue without fading, and this clone reproduces that deep rose tone across the case, lugs, and pushers.
The black Cerachrom ceramic bezel rings the dial and carries a recessed tachymetric scale for reading average speeds over a measured distance. Cerachrom is the corrosion-proof, scratch-resistant ceramic Rolex uses for its modern Daytona bezels, and this super clone reproduces the deep black tone with crisp molded numerals. The screw-down chronograph pushers sit at 2 and 4 o'clock around the Everose gold Twinlock crown, sealing the case for full water resistance.
Scratch-resistant sapphire crystal with anti-reflective coating covers the white dial and resists daily knocks for years of clear reading. The solid screw-down caseback seals the chronograph movement and holds water resistance to 100 meters, supported by the Twinlock crown and the screw-down pushers. The 40mm case and 12.4mm profile give the Daytona 116515LN its balanced sport-luxury proportion on the wrist.
The white dial of this Daytona 116515LN-0003 super clone carries a clean, even white that frames the warm Everose gold case and the black bezel with strong contrast. Three chronograph sub-dials sit on the dial, each ringed with a polished Everose gold-tone border that lifts the registers off the white surface. Applied Everose gold baton markers mark the hours, faceted to catch light against the bright dial.
The three sub-dials run the standard Daytona layout, with small seconds at 6 o'clock, the 30-minute chronograph counter at 3 o'clock, and the 12-hour chronograph counter at 9 o'clock. The central chronograph seconds hand sweeps the full dial when the chronograph runs, while the running seconds stay in the 6 o'clock register. Everose gold-tone baton hands carry luminous fill for low-light reading.
The applied Rolex coronet sits at 12 o'clock above "Rolex Cosmograph Daytona" printed in crisp, fine text. The white dial holds the dial-code identity, where the -0003 suffix denotes this white configuration with Everose gold sub-dial rings. The black bezel scale, the Everose gold registers, and the white base give the 116515LN-0003 a sharp three-tone balance.
The Rolex Daytona 116515LN-0003 super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for three days off the wrist. The Caliber 4130 clone drives the central chronograph seconds and both counter sub-dials through a vertical clutch for a clean start and stop.
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The chronograph pushers engage with a firm, defined click, and the central seconds hand starts cleanly without stutter through the vertical clutch design. The smooth sweeping seconds hand and the quiet rotor confirm the Swiss-grade build of this Daytona 116515LN super clone.
Spec grid:
The Daytona 116515LN-0003 super clone carries the Oysterflex strap, the rubber strap Rolex developed with a flexible metal blade core inside a high-performance black elastomer coating. The strap pairs the comfort of rubber with the rigidity of a metal core, and this super clone reproduces the same ribbed underside cushion system for airflow and a secure fit. An Everose gold-tone Oysterlock safety clasp closes the strap and prevents accidental opening.
The watch weighs approximately 110 grams on the Oysterflex strap, lighter than a full gold bracelet while keeping the substantial case presence of an Everose gold Daytona. The flexible blade core lets the strap follow the wrist contour, and the cushion system holds the case stable through the day. The 40mm case and Oysterflex strap sit comfortably on wrists from 6.5 to 8 inches.
The modern 40mm Cerachrom-bezel Daytona offers three main routes, and the 116515LN holds the Everose gold and Oysterflex tier. The comparison of the three references is listed below.
| Variant | Case Metal | Strap or Bracelet | Super Clone Price |
|---|---|---|---|
| 116515LN (this reference) | Everose gold-tone | Oysterflex rubber strap | $1,549 |
| 116500LN | 904L steel | Oyster bracelet | $1,499 |
| 116508 | Yellow gold-tone | Oyster bracelet | $1,549 |
Buyers select the 116515LN for the warm rose tone of Everose gold paired with the sport-focused Oysterflex strap. Steel buyers prefer the 116500LN for its lower price and the everyday versatility of the Oyster bracelet. Yellow gold buyers choose the 116508 for the traditional gold-on-bracelet look. The 116515LN-0003 Super Clone with the white dial gives the cleanest three-tone contrast of the gold options.
The Rolex Cosmograph Daytona launched in 1963 as a chronograph built for motor racing, with a tachymetric bezel scale for reading average speed over a measured distance. Rolex named the model after the Daytona International Speedway in Florida, and the watch became closely tied to endurance racing. The Daytona moved to the in-house Caliber 4130 in 2000, a chronograph movement with fewer components and a 72-hour power reserve. Rolex introduced Everose gold in 2005 as its own rose gold alloy, mixed to keep the pink hue stable over decades of wear. The 116515LN reference arrived in 2011 as the Everose gold Daytona with a black Cerachrom ceramic bezel and the Oysterflex strap, and the -0003 dial code identifies the white dial variant. The Daytona 116515LN Super Clone carries that combined heritage of the Cosmograph chronograph and Everose gold onto the wrist.
Every Rolex Daytona 116515LN-0003 super clone passes a four-stage quality control sequence before shipping. The QC steps are listed below.
The Daytona 116515LN Super Clone ships in secure, discreet packaging to protect your privacy. The full package contents are listed below.
The Rolex Daytona 116515LN-0003 super clone ships within 24 hours of order confirmation via DHL Express or FedEx Priority with full insurance and discreet packaging. Worldwide delivery lands in 5 to 10 business days across the USA, UK, UAE, India, and Europe. Every watch carries a 1-year limited warranty covering movement defects, with replacement-parts support and servicing guidance provided after purchase. The support channels for the Daytona 116515LN Super Clone are listed below.
Real owners of the Rolex Daytona 116515LN-0003 super clone share the wrist-side verdict. Ratings average 4.9 / 5 across 163 verified orders.
"I wanted the rose gold Daytona with the white dial, and the three Everose gold sub-dial rings on this one are crisp and even. The black ceramic bezel sets it all off. The Oysterflex strap is comfortable from the first day. At $1,549 it reads like the real piece."
"Shipped DHL and arrived in Dubai in 6 days. The packaging was discreet exactly as described. The chronograph pushers click with a defined action, and the central seconds hand starts without any stutter. The Everose gold tone is warm, not orange."
"I was nervous spending this much on my first clone. WhatsApp support answered every question about the 116515LN before I ordered. The watch arrived in a full box set with papers. The Cerachrom bezel and the Oysterflex clasp closed the deal for me."
Yes, the Rolex Daytona 116515LN-0003 sold on Super Clone Watches is a 1:1 super clone that reproduces the genuine Rolex reference at 98% visual and dimensional accuracy. The build matches the Everose gold tone, the white dial with Everose-rimmed sub-dials, and the black Cerachrom bezel within tight tolerance. The price of $1,549 compares to a genuine retail near $42,000 at authorized Rolex dealers.
The -0003 suffix is the Rolex dial code that identifies the white dial variant of the 116515LN reference. Rolex uses dial codes to separate the configurations of a single reference, and other 116515LN listings cover the chocolate, rose, and black dials. This super clone builds the -0003 white dial with Everose gold-rimmed chronograph sub-dials, matching the genuine dial-code specification.
A Swiss-grade automatic clone of Rolex Caliber 4130 powers this Daytona 116515LN-0003 super clone. The movement runs at 28,800 vibrations per hour, holds a 72-hour power reserve, and drives the chronograph through a vertical clutch for a clean start and stop. Performance matches the genuine caliber on frequency and autonomy, with a smooth sweeping chronograph seconds hand and a quiet winding rotor.
The case uses a high-grade Everose gold-tone finish over a 904L stainless steel core rather than solid 18k Everose gold. This construction delivers the exact warm rose color, a substantial wrist weight, and durable scratch resistance for daily wear. Solid 18k Everose gold on the genuine Rolex 116515LN adds roughly $40,000 to the retail price without changing the wrist-side appearance.
The chronograph on this Daytona 116515LN-0003 super clone times elapsed periods through three sub-dials and a central seconds hand. The pusher at 2 o'clock starts and stops the chronograph, the pusher at 4 o'clock resets it, and the small seconds at 6 o'clock keeps running time. The 30-minute counter sits at 3 o'clock and the 12-hour counter at 9 o'clock, both screwed down between uses to hold water resistance.
The authentic Rolex Cosmograph Daytona 116515LN retails near $42,000 at authorized dealers and trades higher on the secondary market. This super clone sells for $1,549, which delivers 98% visual and functional parity at roughly 4% of the genuine retail price. Buyers receive the full Everose gold Daytona wrist presence without the capital commitment.
The Rolex Daytona 116515LN-0003 super clone ships via DHL Express or FedEx Priority with full insurance and tracked, signature-required delivery. The watch travels in secure, discreet packaging to protect your privacy. Transit time runs 5 to 10 business days to the USA, UK, UAE, India, and Europe, and the shipping cost is included in the price.
A 1-year limited warranty covers movement defects and manufacturing faults on this Daytona 116515LN-0003 super clone. Replacement parts sourcing runs through the originating factory via Super Clone Watches support. Movement servicing guidance is provided through WhatsApp and email for the lifetime of the watch.
