| Reference | 116528 |
|---|---|
| Case | 40mm × 12.4mm, 18k yellow gold-tone |
| Dial | White with gold-ringed sub-dials |
The Daytona 116528 is the 40mm yellow gold version of the Rolex Cosmograph Daytona, paired here with a white dial and the engraved yellow gold tachymeter bezel. This super clone reproduces the 116528 reference with three gold-ringed chronograph sub-dials, screw-down pushers, and an Oyster bracelet for $1,499. Every proportion, bezel engraving, and bracelet link follows the genuine reference within tight production tolerance.
The Rolex Daytona 116528 super clone carries a 40mm Oyster case measuring 12.4mm thick, built on a 904L stainless steel core with a high-grade yellow gold-tone finish for accurate color and long-term wear. The case holds two screw-down chronograph pushers at 2 and 4 o'clock, which lock the pushers down to protect the chronograph and support water resistance to 100 meters.
The fixed bezel of this Daytona 116528 super clone carries an engraved tachymetric scale that measures average speed over a known distance. This clone engraves the scale numerals into the yellow gold-tone bezel at consistent depth, so the markings stay sharp against the polished metal. Mirror-polished surfaces wrap the case flanks and the bezel for the bright look yellow gold is known for, with brushed surfaces on the lug tops for contrast.
Scratch-resistant sapphire crystal covers the white dial and resists daily knocks for years of clear reading. The Daytona uses no Cyclops lens, since the reference carries no date display. The screw-down Triplock crown sits at 3 o'clock between the two chronograph pushers, and the solid screw-down caseback seals the movement to hold water resistance at 100 meters.
The white dial of this Daytona 116528 super clone carries a clean, even white that gives bright legibility against the warm yellow gold case. The dial holds applied yellow gold-tone hour markers with luminous fill, and three sub-dials sit recessed into the dial surface for the Cosmograph chronograph layout.
The Daytona 116528 super clone displays three chronograph sub-dials in the genuine arrangement. The small running seconds sub-dial sits at 6 o'clock, the 30-minute counter sits at 3 o'clock, and the 12-hour counter sits at 9 o'clock. Each sub-dial carries a polished gold-tone ring around its edge for contrast against the white dial, and the central chronograph seconds hand sweeps the full dial to time elapsed seconds.
The applied Rolex coronet sits at 12 o'clock, with "Rolex Oyster Perpetual Cosmograph" and "Daytona" printed in crisp text below it and above the 6 o'clock sub-dial. The minute and seconds track frames the dial edge with even spacing for accurate chronograph reading. The white dial, gold-ringed sub-dials, and yellow gold markers give the 116528 a balanced, high-contrast face.
The Rolex Daytona 116528 super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for three days off the wrist.
The chronograph on this 116528 super clone starts, stops, and resets through the two screw-down pushers, and the central seconds hand and the 3 o'clock and 9 o'clock counters track elapsed time. Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The smooth sweeping seconds hand, the clean pusher action, and the quiet rotor confirm the Swiss-grade build.
Spec grid:
The Daytona 116528 super clone carries the Oyster bracelet, the three-piece flat-link design Rolex uses across its sport models. The bracelet uses a yellow gold-tone finish to match the case and the tachymeter bezel, with a folding Oysterlock safety clasp that closes securely and a small Easylink extension that adjusts the length by 5mm.
The watch weighs approximately 165 grams on the full bracelet, giving the substantial wrist presence buyers expect from a gold Daytona. The Oysterlock clasp folds flat against the wrist and locks closed to prevent accidental opening. The 40mm case and tapered Oyster bracelet sit comfortably on wrists from 6.5 to 8 inches.
The Rolex Daytona 116528 super clone carries a 40mm Oyster case measuring 12.4mm thick, built on a 904L stainless steel core with a high-grade yellow gold-tone finish for accurate color and long-term wear. The case holds two screw-down chronograph pushers at 2 and 4 o'clock, which lock the pushers down to protect the chronograph and support water resistance to 100 meters.
The fixed bezel of this Daytona 116528 super clone carries an engraved tachymetric scale that measures average speed over a known distance. This clone engraves the scale numerals into the yellow gold-tone bezel at consistent depth, so the markings stay sharp against the polished metal. Mirror-polished surfaces wrap the case flanks and the bezel for the bright look yellow gold is known for, with brushed surfaces on the lug tops for contrast.
Scratch-resistant sapphire crystal covers the white dial and resists daily knocks for years of clear reading. The Daytona uses no Cyclops lens, since the reference carries no date display. The screw-down Triplock crown sits at 3 o'clock between the two chronograph pushers, and the solid screw-down caseback seals the movement to hold water resistance at 100 meters.
The white dial of this Daytona 116528 super clone carries a clean, even white that gives bright legibility against the warm yellow gold case. The dial holds applied yellow gold-tone hour markers with luminous fill, and three sub-dials sit recessed into the dial surface for the Cosmograph chronograph layout.
The Daytona 116528 super clone displays three chronograph sub-dials in the genuine arrangement. The small running seconds sub-dial sits at 6 o'clock, the 30-minute counter sits at 3 o'clock, and the 12-hour counter sits at 9 o'clock. Each sub-dial carries a polished gold-tone ring around its edge for contrast against the white dial, and the central chronograph seconds hand sweeps the full dial to time elapsed seconds.
The applied Rolex coronet sits at 12 o'clock, with "Rolex Oyster Perpetual Cosmograph" and "Daytona" printed in crisp text below it and above the 6 o'clock sub-dial. The minute and seconds track frames the dial edge with even spacing for accurate chronograph reading. The white dial, gold-ringed sub-dials, and yellow gold markers give the 116528 a balanced, high-contrast face.
The Rolex Daytona 116528 super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for three days off the wrist.
The chronograph on this 116528 super clone starts, stops, and resets through the two screw-down pushers, and the central seconds hand and the 3 o'clock and 9 o'clock counters track elapsed time. Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The smooth sweeping seconds hand, the clean pusher action, and the quiet rotor confirm the Swiss-grade build.
Spec grid:
The Daytona 116528 super clone carries the Oyster bracelet, the three-piece flat-link design Rolex uses across its sport models. The bracelet uses a yellow gold-tone finish to match the case and the tachymeter bezel, with a folding Oysterlock safety clasp that closes securely and a small Easylink extension that adjusts the length by 5mm.
The watch weighs approximately 165 grams on the full bracelet, giving the substantial wrist presence buyers expect from a gold Daytona. The Oysterlock clasp folds flat against the wrist and locks closed to prevent accidental opening. The 40mm case and tapered Oyster bracelet sit comfortably on wrists from 6.5 to 8 inches.
The pre-2023 Cosmograph Daytona offered three main routes, and the 116528 holds the yellow gold tier. The comparison of the three variants is listed below.
| Variant | Case Metal | Bezel | Super Clone Price |
|---|---|---|---|
| 116528 (this reference) | Yellow gold-tone | Engraved gold tachymeter | $1,499 |
| 116505 | Everose gold-tone | Engraved Everose tachymeter | $1,499 |
| 116500LN | 904L steel | Black Cerachrom ceramic | $1,399 |
Buyers select the 116528 for the warm, traditional shine of yellow gold, the most classic Daytona look. Everose buyers prefer the softer rose tone of the 116505. Steel buyers choose the 116500LN for the durable black ceramic bezel and a lower price. The 116528 Super Clone with a white dial gives the brightest, most legible face of the three.
The Rolex Cosmograph Daytona launched in 1963 as a chronograph built for motorsport drivers, named after the Daytona International Speedway in Florida. Rolex fitted early references with a tachymeter scale so drivers could measure average speed over a measured distance. The model wore manual-wind Caliber 727 in vintage references and a Zenith-based Caliber 4030 in the 16-series. Rolex introduced its own automatic chronograph, Caliber 4130, in 2000, and the 116528 reference carries that movement in the yellow gold case. The 116528 Super Clone brings the full Cosmograph Daytona heritage of motorsport timing and yellow gold onto the wrist.
Every Rolex Daytona 116528 super clone passes a four-stage quality control sequence before shipping. The QC steps are listed below.
The 116528 Super Clone ships in secure, discreet packaging to protect your privacy. The full package contents are listed below.
The Rolex Daytona 116528 super clone ships within 24 hours of order confirmation via DHL Express or FedEx Priority with full insurance and discreet packaging. Worldwide delivery lands in 5 to 10 business days across the USA, UK, UAE, India, and Europe. Every watch carries a 1-year limited warranty covering movement defects, with replacement-parts support and servicing guidance provided after purchase. The support channels for the 116528 Super Clone are listed below.
Real owners of the Rolex Daytona 116528 super clone share the wrist-side verdict. Ratings average 4.9 / 5 across 162 verified orders.
"I wanted the yellow gold Daytona with the white dial, and the gold rings around the three sub-dials are crisp and even. The contrast against the white face is sharp. The chronograph pushers screw down tight like the real one. At $1,499 it looks like the genuine piece on the wrist."
"Shipped DHL and arrived in London in 6 days. The packaging was discreet exactly as described. The chronograph starts and resets with no lag, and the central seconds hand sweeps smoothly. The watch has real weight to it from the gold-tone case."
"I was nervous spending this much on my first clone. WhatsApp support answered every question about the Caliber 4130 movement before I ordered. The watch arrived in a full box set with papers. The engraved tachymeter bezel sealed the deal for me."
Yes, the Rolex Daytona 116528 sold on Super Clone Watches is a 1:1 super clone that reproduces the genuine Rolex reference at 98% visual and dimensional accuracy. The build matches the yellow gold tone, the white dial finish, and the three-sub-dial Cosmograph layout within tight tolerance. The price of $1,499 compares to a genuine retail near $42,000 at authorized Rolex dealers.
A Swiss-grade automatic clone of Rolex Caliber 4130 powers this Daytona 116528 super clone. The movement runs at 28,800 vibrations per hour, holds a 72-hour power reserve, and drives the chronograph with its 30-minute and 12-hour counters. Performance matches the genuine caliber on frequency and autonomy, with a smooth sweeping seconds hand and clean pusher action.
The chronograph on the Daytona 116528 works through two screw-down pushers at 2 and 4 o'clock that start, stop, and reset elapsed-time tracking. The central seconds hand times elapsed seconds, the 3 o'clock sub-dial counts up to 30 minutes, and the 9 o'clock sub-dial counts up to 12 hours. Buyers unscrew each pusher before using the chronograph and screw it back down to keep the 100-meter water resistance.
The case uses a high-grade yellow gold-tone finish over a 904L stainless steel core rather than solid 18k yellow gold. This construction delivers the exact warm gold color, a substantial wrist weight, and durable scratch resistance for daily wear. Solid 18k yellow gold on the genuine Rolex 116528 adds roughly $39,000 to the retail price without changing the wrist-side appearance.
The Daytona 116528 has no Cyclops lens because the Cosmograph Daytona carries no date display on its dial. Rolex designs the Daytona as a pure chronograph focused on elapsed-time measurement, so the sapphire crystal stays flat and uninterrupted. This super clone keeps the same crystal, with no Cyclops magnifier.
The tachymeter bezel on this 116528 super clone is used to measure average speed over a known distance. A driver starts the chronograph at a measured point, stops it at the next, and reads the speed in units per hour off the engraved scale. This super clone engraves the tachymetric scale into the yellow gold-tone bezel at consistent depth for sharp legibility.
The authentic Rolex Daytona 116528 retails near $42,000 at authorized dealers and trades higher on the secondary market. This super clone sells for $1,499, which delivers 98% visual and functional parity at roughly 4% of the genuine retail price. Buyers receive the full yellow gold Daytona wrist presence without the capital commitment.
A 1-year limited warranty covers movement defects and manufacturing faults on this Daytona 116528 super clone. Replacement parts sourcing runs through the originating factory via Super Clone Watches support. Movement servicing guidance is provided through WhatsApp and email for the lifetime of the watch.
