| Reference | 116528 |
|---|---|
| Case | 40mm × 12.5mm, 18k yellow gold-tone |
| Dial | Champagne-gold with gold chronograph sub-dials |
The Daytona 116528 is the 40mm yellow gold version of the Rolex Cosmograph Daytona, paired here with a champagne-gold dial and gold sub-dial rings. This super clone reproduces the 116528 reference with an engraved yellow gold tachymeter bezel, three chronograph counters, and the Oyster bracelet for $1,499. Every case proportion, bezel scale marking, and bracelet link follows the genuine reference within tight production tolerance.
The Rolex Daytona 116528 super clone carries a 40mm Oyster case measuring 12.5mm thick, built on a 904L stainless steel core with a high-grade yellow gold-tone finish for accurate color and long-term wear. Screw-down chronograph pushers flank the Twinlock crown at 3 o'clock, and each pusher threads down to seal the case for water resistance to 100 meters.
The engraved tachymeter bezel rings the dial with a units-per-hour scale used to read average speed over a measured distance. This super clone cuts the bezel in yellow gold-tone with crisp, laser-aligned engraving so the numerals stay sharp at every viewing angle. Mirror-polished surfaces wrap the case flanks and the bezel for the bright look yellow gold is known for, set against satin-finished lug tops.
Scratch-resistant sapphire crystal covers the champagne-gold dial and resists daily knocks for years of clear reading. The crystal carries an anti-reflective treatment that keeps the dial legible in direct light. The solid screw-down caseback seals the chronograph movement and holds water resistance to 100 meters, supported by the Twinlock crown system.
The champagne-gold dial of this Daytona 116528 super clone carries a warm, soft gold tone that sits in close harmony with the yellow gold case for a full monochrome gold look. The dial holds applied yellow gold-tone baton markers at every hour, faceted and polished to catch light against the champagne surface.
The dial layout follows the Cosmograph Daytona arrangement of three chronograph sub-dials, and the breakdown of the three counters is listed below.
Each sub-dial carries a ringed gold-tone surround and a snailed center for depth. Yellow gold-tone baton hands sweep the main dial, and the central chronograph seconds hand runs smoothly at 28,800 vibrations per hour.
The applied Rolex coronet sits at 12 o'clock, with "Rolex Oyster Perpetual Superlative Chronometer Cosmograph Daytona" printed in fine, crisp text across the upper and lower dial. The minute and seconds track frames the dial edge with even spacing. The champagne-gold dial and gold counters give the 116528 a balanced, warm symmetry across the chronograph layout.
The Rolex Daytona 116528 super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for three days off the wrist.
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The chronograph starts, stops, and resets cleanly through the screw-down pushers, with the central seconds hand returning to zero in a single snap. The smooth sweeping seconds hand and the quiet rotor confirm the Swiss-grade chronograph build.
Spec grid:
The Daytona 116528 super clone carries the Oyster bracelet, the flat three-piece-link design Rolex uses across its professional sport models. The bracelet uses a yellow gold-tone finish to match the case and the tachymeter bezel, with polished center links framed by satin-finished outer links. The Daytona uses the Oyster bracelet and never the President bracelet.
The watch weighs approximately 150 grams on the full bracelet, giving the substantial wrist presence buyers expect from a gold Daytona. The folding Oysterlock safety clasp closes flush and holds a secondary catch that guards against accidental opening. The 40mm case and tapered Oyster bracelet sit comfortably on wrists from 6.5 to 8 inches.
The Rolex Daytona 116528 super clone carries a 40mm Oyster case measuring 12.5mm thick, built on a 904L stainless steel core with a high-grade yellow gold-tone finish for accurate color and long-term wear. Screw-down chronograph pushers flank the Twinlock crown at 3 o'clock, and each pusher threads down to seal the case for water resistance to 100 meters.
The engraved tachymeter bezel rings the dial with a units-per-hour scale used to read average speed over a measured distance. This super clone cuts the bezel in yellow gold-tone with crisp, laser-aligned engraving so the numerals stay sharp at every viewing angle. Mirror-polished surfaces wrap the case flanks and the bezel for the bright look yellow gold is known for, set against satin-finished lug tops.
Scratch-resistant sapphire crystal covers the champagne-gold dial and resists daily knocks for years of clear reading. The crystal carries an anti-reflective treatment that keeps the dial legible in direct light. The solid screw-down caseback seals the chronograph movement and holds water resistance to 100 meters, supported by the Twinlock crown system.
The champagne-gold dial of this Daytona 116528 super clone carries a warm, soft gold tone that sits in close harmony with the yellow gold case for a full monochrome gold look. The dial holds applied yellow gold-tone baton markers at every hour, faceted and polished to catch light against the champagne surface.
The dial layout follows the Cosmograph Daytona arrangement of three chronograph sub-dials, and the breakdown of the three counters is listed below.
Each sub-dial carries a ringed gold-tone surround and a snailed center for depth. Yellow gold-tone baton hands sweep the main dial, and the central chronograph seconds hand runs smoothly at 28,800 vibrations per hour.
The applied Rolex coronet sits at 12 o'clock, with "Rolex Oyster Perpetual Superlative Chronometer Cosmograph Daytona" printed in fine, crisp text across the upper and lower dial. The minute and seconds track frames the dial edge with even spacing. The champagne-gold dial and gold counters give the 116528 a balanced, warm symmetry across the chronograph layout.
The Rolex Daytona 116528 super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for three days off the wrist.
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The chronograph starts, stops, and resets cleanly through the screw-down pushers, with the central seconds hand returning to zero in a single snap. The smooth sweeping seconds hand and the quiet rotor confirm the Swiss-grade chronograph build.
Spec grid:
The Daytona 116528 super clone carries the Oyster bracelet, the flat three-piece-link design Rolex uses across its professional sport models. The bracelet uses a yellow gold-tone finish to match the case and the tachymeter bezel, with polished center links framed by satin-finished outer links. The Daytona uses the Oyster bracelet and never the President bracelet.
The watch weighs approximately 150 grams on the full bracelet, giving the substantial wrist presence buyers expect from a gold Daytona. The folding Oysterlock safety clasp closes flush and holds a secondary catch that guards against accidental opening. The 40mm case and tapered Oyster bracelet sit comfortably on wrists from 6.5 to 8 inches.
The Cosmograph Daytona offers several metal routes, and the 116528 holds the yellow gold tier. The comparison of the three variants is listed below.
| Variant | Case Metal | Bezel | Super Clone Price |
|---|---|---|---|
| 116528 (this reference) | Yellow gold-tone | Engraved tachymeter, gold | $1,499 |
| 116505 | Everose gold-tone | Engraved tachymeter, Everose | $1,499 |
| 116520 | 904L steel | Engraved tachymeter, steel | $1,299 |
Buyers select the 116528 for the warm, classic statement of a full yellow gold chronograph. Everose gold buyers prefer the softer, more modern rose tone of the 116505. Steel buyers choose the 116520 for a lighter, lower-key daily wear at a lower price. The 116528 Super Clone with a champagne-gold dial gives the most cohesive monochrome gold look of the three.
The Rolex Cosmograph Daytona launched in 1963 as a chronograph built for racing drivers, named after the Daytona International Speedway in Florida. Rolex fitted the tachymeter scale to the bezel so drivers could read average speed directly from the watch. Early Daytona references used manual-wind movements such as Caliber 727, and the five-digit 16xxx generation introduced an automatic chronograph with Caliber 4030. Rolex launched the in-house Caliber 4130 in 2000, and the 116528 reference carries that movement in an 18k yellow gold case. The 116528 Super Clone carries that combined heritage of the Cosmograph Daytona and Caliber 4130 onto the wrist.
Every Rolex Daytona 116528 super clone passes a four-stage quality control sequence before shipping. The QC steps are listed below.
The 116528 Super Clone ships in secure, discreet packaging to protect your privacy. The full package contents are listed below.
The Rolex Daytona 116528 super clone ships within 24 hours of order confirmation via DHL Express or FedEx Priority with full insurance and discreet packaging. Worldwide delivery lands in 5 to 10 business days across the USA, UK, UAE, India, and Europe. Every watch carries a 1-year limited warranty covering movement defects, with replacement-parts support and servicing guidance provided after purchase. The support channels for the 116528 Super Clone are listed below.
Real owners share the verdict.
I wanted a full gold Daytona, and the champagne dial against the yellow gold case is exactly the warm look I was after. The sub-dial rings catch the light cleanly. The chronograph pushers screw down tight like the real reference. At $1,499 it wears like serious money.
Shipped FedEx and arrived in London in 7 days. The packaging was discreet exactly as described. The chronograph starts and stops crisp, and the seconds hand snaps back to zero in one click. The weight feels close to a real gold piece.
I was nervous spending this much on my first clone. WhatsApp support answered every question about the Caliber 4130 movement before I ordered. The watch arrived in a full box set with papers. The engraved gold tachymeter bezel sealed the deal for me.
Yes, the Rolex Daytona 116528 sold on Super Clone Watches is a 1:1 super clone that reproduces the genuine Rolex reference at 98% visual and dimensional accuracy. The build matches the yellow gold tone, the champagne-gold dial, the three sub-dial layout, and the Oyster bracelet geometry within tight tolerance. The price of $1,499 compares to a genuine retail near $40,000 at authorized Rolex dealers.
A Swiss-grade automatic chronograph clone of Rolex Caliber 4130 powers this Daytona 116528 super clone. The movement runs at 28,800 vibrations per hour, holds a 72-hour power reserve, and drives the chronograph functions through the screw-down pushers. Performance matches the genuine caliber on frequency and autonomy, with a smooth sweeping seconds hand and a quiet winding rotor.
The tachymeter bezel on the 116528 measures average speed over a known distance using the chronograph. The user starts the chronograph at a reference point and stops it after one measured mile or kilometer, and the central seconds hand points to the speed value on the engraved scale. The genuine 116528 carries this scale on the yellow gold bezel, and this super clone reproduces the scale with laser-aligned engraving.
The three sub-dials on the champagne-gold dial split into one running display and two chronograph counters. The sub-dial at 6 o'clock shows constant small seconds, the sub-dial at 3 o'clock records elapsed chronograph minutes up to 30, and the sub-dial at 9 o'clock records elapsed chronograph hours up to 12. The Caliber 4130 clone movement drives all three counters from the central chronograph seconds hand.
The case uses a high-grade yellow gold-tone finish over a 904L stainless steel core rather than solid 18k yellow gold. This construction delivers the warm gold color, a substantial wrist weight, and durable scratch resistance for daily wear. Solid 18k yellow gold on the genuine Rolex 116528 adds tens of thousands of dollars to the retail price without changing the wrist-side appearance.
The authentic Rolex Cosmograph Daytona 116528 retails near $40,000 at authorized dealers and trades higher on the secondary market. This super clone sells for $1,499, which delivers 98% visual and functional parity at roughly 4% of the genuine retail price. Buyers receive the full yellow gold Daytona wrist presence without the capital commitment.
The Rolex Daytona 116528 super clone ships via DHL Express or FedEx Priority with full insurance and tracked, signature-required delivery. The watch travels in secure, discreet packaging to protect your privacy. Transit time runs 5 to 10 business days to the USA, UK, UAE, India, and Europe, and the shipping cost is included in the price.
A 1-year limited warranty covers movement defects and manufacturing faults on this Daytona 116528 super clone. Replacement parts sourcing runs through the originating factory via Super Clone Watches support. Movement servicing guidance is provided through WhatsApp and email for the lifetime of the watch.
