| Reference | 126506 |
|---|---|
| Case | 40mm × 12.4mm, 950 platinum-tone |
| Dial | Ice blue with chestnut-brown sub-dials |
The Daytona 126506 is the platinum version of the new-generation Rolex Cosmograph Daytona, paired here with the ice blue dial and the chestnut-brown Cerachrom bezel. This super clone reproduces the 126506 reference with three chronograph sub-dials, screw-down pushers, and the platinum-tone Oyster bracelet for $1,699. Every proportion, sub-dial position, and bracelet link follows the genuine reference within tight production tolerance.
The Rolex Daytona 126506 super clone carries a 40mm Oyster case measuring 12.4mm thick, built on a 904L stainless steel core with a high-grade platinum-tone finish for accurate color and long-term wear. The 2023 Daytona update widened the bezel slightly and reshaped the lugs, and this clone follows the redrawn case profile of the new-generation reference.
The chestnut-brown Cerachrom bezel rings the dial and carries an engraved tachymetric scale for measuring average speed over a fixed distance. Cerachrom is the high-hardness ceramic Rolex uses for its bezels, and this super clone reproduces the deep brown ceramic insert with a metallized scale that stays legible against the dark surface. The brown Cerachrom bezel marks the platinum 126506 apart from steel and gold Daytona references, which use a black ceramic bezel.
Screw-down chronograph pushers sit above and below the Triplock screw-down crown at 3 o'clock, locking the chronograph against accidental activation and supporting water resistance to 100 meters. Scratch-resistant sapphire crystal covers the ice blue dial with an anti-reflective coating for clear reading in bright light. The solid screw-down caseback seals the chronograph movement inside the platinum-tone case.
The ice blue dial of this Daytona 126506 super clone carries the soft pale blue tone that Rolex reserves only for its platinum cases. The dial reads as a quiet, cool blue under daylight and signals the platinum metal to anyone who knows the reference. Applied platinum-tone hour markers ring the dial, filled with Chromalight for low-light legibility.
The 126506 super clone carries three chronograph sub-dials in chestnut brown that contrast cleanly against the ice blue base. The small seconds counter sits at 6 o'clock, the 30-minute counter sits at 3 o'clock, and the 12-hour counter sits at 9 o'clock. The brown sub-dials match the chestnut Cerachrom bezel and give the platinum Daytona its signature two-tone dial layout.
Platinum-tone baton hands sweep across the ice blue dial, with the central chronograph seconds hand running smoothly at 28,800 vibrations per hour. The applied Rolex coronet sits at 12 o'clock above "Rolex Cosmograph Daytona" printed in fine text. The three balanced sub-dials and the tachymetric bezel give the 126506 the symmetric, instrument-style face the Daytona is known for.
The Rolex Daytona 126506 super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4131 in feel, frequency, and autonomy. Caliber 4131 is the chronograph movement Rolex introduced with the 2023 Daytona update, and this clone follows its column-wheel chronograph layout. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve.
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4131. The central chronograph seconds hand starts, stops, and resets cleanly through the screw-down pushers, and the 30-minute and 12-hour counters track elapsed time accurately. The smooth sweeping seconds hand and the quiet winding rotor confirm the Swiss-grade build.
Spec grid:
The Daytona 126506 super clone carries the Oyster bracelet, the flat three-piece-link design Rolex pairs with the Cosmograph Daytona. The bracelet uses a platinum-tone finish to match the case, with polished centre links between satin-brushed outer links that taper toward the wrist. The Daytona uses the Oyster bracelet rather than the President bracelet, which keeps the platinum 126506 a true sports chronograph.
The Oysterlock folding safety clasp closes flush and adds a folding cover that guards against accidental opening. The watch weighs approximately 150 grams on the full bracelet, giving the substantial wrist presence buyers expect from a platinum Daytona. The 40mm case and tapered Oyster bracelet sit comfortably on wrists from 6.5 to 8 inches.
The Rolex Daytona 126506 super clone carries a 40mm Oyster case measuring 12.4mm thick, built on a 904L stainless steel core with a high-grade platinum-tone finish for accurate color and long-term wear. The 2023 Daytona update widened the bezel slightly and reshaped the lugs, and this clone follows the redrawn case profile of the new-generation reference.
The chestnut-brown Cerachrom bezel rings the dial and carries an engraved tachymetric scale for measuring average speed over a fixed distance. Cerachrom is the high-hardness ceramic Rolex uses for its bezels, and this super clone reproduces the deep brown ceramic insert with a metallized scale that stays legible against the dark surface. The brown Cerachrom bezel marks the platinum 126506 apart from steel and gold Daytona references, which use a black ceramic bezel.
Screw-down chronograph pushers sit above and below the Triplock screw-down crown at 3 o'clock, locking the chronograph against accidental activation and supporting water resistance to 100 meters. Scratch-resistant sapphire crystal covers the ice blue dial with an anti-reflective coating for clear reading in bright light. The solid screw-down caseback seals the chronograph movement inside the platinum-tone case.
The ice blue dial of this Daytona 126506 super clone carries the soft pale blue tone that Rolex reserves only for its platinum cases. The dial reads as a quiet, cool blue under daylight and signals the platinum metal to anyone who knows the reference. Applied platinum-tone hour markers ring the dial, filled with Chromalight for low-light legibility.
The 126506 super clone carries three chronograph sub-dials in chestnut brown that contrast cleanly against the ice blue base. The small seconds counter sits at 6 o'clock, the 30-minute counter sits at 3 o'clock, and the 12-hour counter sits at 9 o'clock. The brown sub-dials match the chestnut Cerachrom bezel and give the platinum Daytona its signature two-tone dial layout.
Platinum-tone baton hands sweep across the ice blue dial, with the central chronograph seconds hand running smoothly at 28,800 vibrations per hour. The applied Rolex coronet sits at 12 o'clock above "Rolex Cosmograph Daytona" printed in fine text. The three balanced sub-dials and the tachymetric bezel give the 126506 the symmetric, instrument-style face the Daytona is known for.
The Rolex Daytona 126506 super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4131 in feel, frequency, and autonomy. Caliber 4131 is the chronograph movement Rolex introduced with the 2023 Daytona update, and this clone follows its column-wheel chronograph layout. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve.
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4131. The central chronograph seconds hand starts, stops, and resets cleanly through the screw-down pushers, and the 30-minute and 12-hour counters track elapsed time accurately. The smooth sweeping seconds hand and the quiet winding rotor confirm the Swiss-grade build.
Spec grid:
The Daytona 126506 super clone carries the Oyster bracelet, the flat three-piece-link design Rolex pairs with the Cosmograph Daytona. The bracelet uses a platinum-tone finish to match the case, with polished centre links between satin-brushed outer links that taper toward the wrist. The Daytona uses the Oyster bracelet rather than the President bracelet, which keeps the platinum 126506 a true sports chronograph.
The Oysterlock folding safety clasp closes flush and adds a folding cover that guards against accidental opening. The watch weighs approximately 150 grams on the full bracelet, giving the substantial wrist presence buyers expect from a platinum Daytona. The 40mm case and tapered Oyster bracelet sit comfortably on wrists from 6.5 to 8 inches.
The new-generation Daytona offers three main metal routes, and the 126506 holds the platinum tier. The comparison of the three metal variants is listed below.
| Variant | Case Metal | Bezel | Super Clone Price |
|---|---|---|---|
| 126506 (this reference) | 950 platinum-tone | Chestnut-brown Cerachrom | $1,699 |
| 126500LN | 904L steel | Black Cerachrom | $1,499 |
| 126515LN | Everose gold-tone | Black Cerachrom | $1,599 |
Buyers select the 126506 for the ice blue dial and the brown Cerachrom bezel, a combination Rolex offers only on the platinum Daytona. Steel buyers prefer the 126500LN for the classic black-and-white panda or reverse-panda look. Everose buyers choose the 126515LN for a warm rose-gold tone. The 126506 Super Clone gives the rarest dial-and-bezel pairing of the three.
The Rolex Cosmograph Daytona launched in 1963 as a chronograph built for motor racing, with a tachymetric bezel for reading average speed. Rolex named the model after the Daytona International Speedway in Florida, the home of American endurance racing. The Daytona used hand-wound calibers through the 1980s, moved to the self-winding Caliber 4130 in 2000, and adopted the new-generation Caliber 4131 with the 2023 update. Rolex introduced the platinum Daytona in 2013 for the model's 50th anniversary and paired it with the ice blue dial reserved for platinum cases. The 126506 reference holds the platinum case in the new generation, and the 126506 Super Clone carries that combined heritage of the platinum Daytona and the Cosmograph chronograph onto the wrist.
Every Rolex Daytona 126506 super clone passes a four-stage quality control sequence before shipping. The QC steps are listed below.
The 126506 Super Clone ships in secure, discreet packaging to protect your privacy. The full package contents are listed below.
The Rolex Daytona 126506 super clone ships within 24 hours of order confirmation via DHL Express or FedEx Priority with full insurance and discreet packaging. Worldwide delivery lands in 5 to 10 business days across the USA, UK, UAE, India, and Europe. Every watch carries a 1-year limited warranty covering movement defects, with replacement-parts support and servicing guidance provided after purchase. The support channels for the 126506 Super Clone are listed below.
Real owners of the Rolex Daytona 126506 super clone share the wrist-side verdict. Ratings average 4.9 / 5 across 132 verified orders.
"I wanted the platinum Daytona, and the ice blue tone on this one is soft and cool, not a bright sky blue like some clones show. The brown sub-dials sit perfectly against it. The Oyster bracelet feels heavy and solid. At $1,699 it reads like the real piece."
"Shipped DHL and arrived in Dubai in 6 days. The packaging was discreet exactly as described. The screw-down pushers unlock with a clean turn, and the chronograph starts, stops, and resets with no lag. The 12-hour counter tracks accurately."
"I was nervous spending this much on my first clone. WhatsApp support answered every question about the Caliber 4131 movement before I ordered. The watch arrived in a full box set with papers. The brown Cerachrom bezel sealed the deal for me."
Yes, the Rolex Daytona 126506 sold on Super Clone Watches is a 1:1 super clone that reproduces the genuine Rolex reference at 98% visual and dimensional accuracy. The build matches the ice blue dial, the chestnut-brown Cerachrom bezel, and the Oyster bracelet geometry within tight tolerance. The price of $1,699 compares to a genuine retail near $80,000 at authorized Rolex dealers.
The dial is ice blue because Rolex reserves the ice blue color for its platinum cases, and the 126506 is the platinum Daytona. The pale blue tone signals the 950 platinum metal to anyone who knows the reference. This super clone reproduces that soft, cool ice blue base paired with chestnut-brown sub-dials, matching the genuine platinum 126506 dial layout.
A Swiss-grade automatic clone of Rolex Caliber 4131 powers this Daytona 126506 super clone. Caliber 4131 is the chronograph movement Rolex introduced with the 2023 Daytona update, and this clone runs at 28,800 vibrations per hour with a 72-hour power reserve. The movement drives the central chronograph seconds hand plus the 30-minute and 12-hour counters through screw-down pushers.
The case uses a high-grade platinum-tone finish over a 904L stainless steel core rather than solid 950 platinum. This construction delivers the cool platinum color, a substantial wrist weight, and durable scratch resistance for daily wear. Solid 950 platinum on the genuine Rolex 126506 adds roughly $78,000 to the retail price without changing the wrist-side appearance.
Yes, the chronograph on the 126506 super clone fully works. The central seconds hand starts, stops, and resets through the screw-down pushers at 2 and 4 o'clock, and the 30-minute and 12-hour counters track elapsed time. The Caliber 4131 clone movement drives all three chronograph functions, and the screw-down pushers lock the chronograph during normal wear.
The authentic Rolex Cosmograph Daytona 126506 retails near $80,000 at authorized dealers and trades well above that on the secondary market. This super clone sells for $1,699, which delivers 98% visual and functional parity at roughly 2% of the genuine retail price. Buyers receive the full platinum Daytona wrist presence without the capital commitment.
The Rolex Daytona 126506 super clone ships via DHL Express or FedEx Priority with full insurance and tracked, signature-required delivery. The watch travels in secure, discreet packaging to protect your privacy. Transit time runs 5 to 10 business days to the USA, UK, UAE, India, and Europe, and the shipping cost is included in the price.
A 1-year limited warranty covers movement defects and manufacturing faults on this Daytona 126506 super clone. Replacement parts sourcing runs through the originating factory via Super Clone Watches support. Movement servicing guidance is provided through WhatsApp and email for the lifetime of the watch.
