| Reference | 116508 |
|---|---|
| Case | 40mm × 12.4mm, 18k yellow gold-tone |
| Dial | Green with gold chronograph sub-dials |
The Daytona 116508 is the 40mm yellow gold version of the Rolex Cosmograph Daytona, paired here with a green dial and gold chronograph sub-dials. This super clone reproduces the 116508 reference with an engraved gold tachymeter bezel, screw-down chronograph pushers, and a yellow gold Oyster bracelet for $1,499. Every counter position, bezel marking, and bracelet link follows the genuine reference within tight production tolerance.
The Rolex Daytona 116508 super clone carries a 40mm Oyster case measuring 12.4mm thick, built on a 904L stainless steel core with a high-grade yellow gold-tone finish for accurate color and long-term wear. Two screw-down chronograph pushers flank the screw-down Triplock crown at 3 o'clock, and each pusher locks down to support the 100-meter water resistance.
The tachymeter bezel rings the dial with an engraved speed scale graduated from 60 to 400 units per hour for measuring average speed over a fixed distance. This super clone cuts and fills each engraved numeral cleanly so the scale stays legible against the polished gold rim. Mirror-polished surfaces wrap the case sides, lugs, and bezel for the bright look yellow gold is known for.
Scratch-resistant sapphire crystal with anti-reflective coating covers the green dial and keeps it readable in direct light for years of clear use. The Daytona uses a flat crystal without a Cyclops lens, since the reference carries no date window. The solid screw-down caseback seals the Caliber 4130 clone movement and holds water resistance to 100 meters, supported by the Triplock crown system.
The green dial of this Daytona 116508 super clone carries a rich, even green that sets a distinctive tone against the warm yellow gold case. The dial holds applied gold-tone hour markers and three recessed chronograph counters, each finished with a fine snailed texture that catches light at a different angle than the main dial.
The dial carries three chronograph sub-dials in the standard Daytona layout. The three counters are listed below.
Gold-tone baton hands sweep the main dial, and the central chronograph seconds hand starts, stops, and resets through the two screw-down pushers.
The applied Rolex coronet sits at 12 o'clock above "Rolex Oyster Perpetual Superlative Chronometer Cosmograph Daytona" printed in crisp, fine text. The minute and seconds track frames the dial edge with even spacing. The green dial and gold counters give the 116508 a balanced, modern face that reads cleanly at a glance.
The Rolex Daytona 116508 super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for a full weekend off the wrist.
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The vertical-clutch chronograph engages cleanly with no stutter when the top pusher starts the central seconds hand. The smooth sweeping seconds hand and the quiet winding rotor confirm the Swiss-grade build of the 116508 Super Clone.
Spec grid:
The Daytona 116508 super clone carries the Oyster bracelet, the three-piece flat-link design Rolex pairs with the gold Cosmograph. The bracelet uses a yellow gold-tone finish to match the case and the tachymeter bezel, with polished center links framed by brushed outer links that taper from the lugs toward the wrist.
The watch weighs approximately 145 grams on the full bracelet, giving the substantial wrist presence buyers expect from a gold Daytona. The folding Oysterlock safety clasp closes flush and locks shut to prevent accidental opening. The 40mm case and tapered Oyster bracelet sit comfortably on wrists from 6.5 to 8 inches.
The Rolex Daytona 116508 super clone carries a 40mm Oyster case measuring 12.4mm thick, built on a 904L stainless steel core with a high-grade yellow gold-tone finish for accurate color and long-term wear. Two screw-down chronograph pushers flank the screw-down Triplock crown at 3 o'clock, and each pusher locks down to support the 100-meter water resistance.
The tachymeter bezel rings the dial with an engraved speed scale graduated from 60 to 400 units per hour for measuring average speed over a fixed distance. This super clone cuts and fills each engraved numeral cleanly so the scale stays legible against the polished gold rim. Mirror-polished surfaces wrap the case sides, lugs, and bezel for the bright look yellow gold is known for.
Scratch-resistant sapphire crystal with anti-reflective coating covers the green dial and keeps it readable in direct light for years of clear use. The Daytona uses a flat crystal without a Cyclops lens, since the reference carries no date window. The solid screw-down caseback seals the Caliber 4130 clone movement and holds water resistance to 100 meters, supported by the Triplock crown system.
The green dial of this Daytona 116508 super clone carries a rich, even green that sets a distinctive tone against the warm yellow gold case. The dial holds applied gold-tone hour markers and three recessed chronograph counters, each finished with a fine snailed texture that catches light at a different angle than the main dial.
The dial carries three chronograph sub-dials in the standard Daytona layout. The three counters are listed below.
Gold-tone baton hands sweep the main dial, and the central chronograph seconds hand starts, stops, and resets through the two screw-down pushers.
The applied Rolex coronet sits at 12 o'clock above "Rolex Oyster Perpetual Superlative Chronometer Cosmograph Daytona" printed in crisp, fine text. The minute and seconds track frames the dial edge with even spacing. The green dial and gold counters give the 116508 a balanced, modern face that reads cleanly at a glance.
The Rolex Daytona 116508 super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for a full weekend off the wrist.
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The vertical-clutch chronograph engages cleanly with no stutter when the top pusher starts the central seconds hand. The smooth sweeping seconds hand and the quiet winding rotor confirm the Swiss-grade build of the 116508 Super Clone.
Spec grid:
The Daytona 116508 super clone carries the Oyster bracelet, the three-piece flat-link design Rolex pairs with the gold Cosmograph. The bracelet uses a yellow gold-tone finish to match the case and the tachymeter bezel, with polished center links framed by brushed outer links that taper from the lugs toward the wrist.
The watch weighs approximately 145 grams on the full bracelet, giving the substantial wrist presence buyers expect from a gold Daytona. The folding Oysterlock safety clasp closes flush and locks shut to prevent accidental opening. The 40mm case and tapered Oyster bracelet sit comfortably on wrists from 6.5 to 8 inches.
The modern Cosmograph Daytona offers three popular routes, and the 116508 holds the yellow gold tier. The comparison of the three variants is listed below.
| Variant | Case Metal | Bezel | Super Clone Price |
|---|---|---|---|
| 116508 (this reference) | Yellow gold-tone | Engraved gold tachymeter | $1,499 |
| 116500LN | 904L steel | Black Cerachrom tachymeter | $1,299 |
| 116505 | Everose gold-tone | Engraved gold tachymeter | $1,499 |
Buyers select the 116508 for the full warmth of yellow gold and the standout green dial, the most recognized color of this reference. Steel 116500LN buyers prefer the sportier ceramic bezel and a lower price. Everose 116505 buyers choose a softer rose tone over classic yellow gold. The 116508 Super Clone with a green dial gives the most distinctive face of the three.
The Rolex Cosmograph Daytona launched in 1963 as a chronograph built for motor racing, named after the Daytona International Speedway in Florida. Rolex designed the tachymeter bezel to let drivers read average speed directly from elapsed time. The first self-winding Daytona generation arrived in 1988, and the in-house Caliber 4130 followed in 2000 with a simpler, more reliable chronograph build. The 116508 reference holds the 18k yellow gold case in the Caliber 4130 generation, and Rolex added the green dial as a signature option for this gold reference. The 116508 Super Clone carries that combined heritage of the gold Cosmograph and the racing chronograph onto the wrist.
Every Rolex Daytona 116508 super clone passes a four-stage quality control sequence before shipping. The QC steps are listed below.
The 116508 Super Clone ships in secure, discreet packaging to protect your privacy. The full package contents are listed below.
The Rolex Daytona 116508 super clone ships within 24 hours of order confirmation via DHL Express or FedEx Priority with full insurance and discreet packaging. Worldwide delivery lands in 5 to 10 business days across the USA, UK, UAE, India, and Europe. Every watch carries a 1-year limited warranty covering movement defects, with replacement-parts support and servicing guidance provided after purchase. The support channels for the 116508 Super Clone are listed below.
Real owners of the Rolex Daytona 116508 super clone share the wrist-side verdict. Ratings average 4.9 / 5 across 163 verified orders.
"I wanted the green Daytona and this clone nails the color. The dial green is deep, not lime, and the gold sub-dials sit perfectly inside it. The chronograph pushers screw down tight and the central seconds hand resets dead to zero. At $1,499 it looks like the $40,000 piece."
"Shipped DHL and cleared customs with no trouble. The packaging was discreet exactly as described. The yellow gold tone is warm and even across the case and Oyster bracelet. The chronograph starts and stops with a clean click every time."
"I was nervous spending this much on my first clone. WhatsApp support answered every question about the movement before I ordered. The watch arrived in a full box set with papers. The engraved gold bezel and the Oysterlock clasp closed the deal for me."
Yes, the Rolex Daytona 116508 sold on Super Clone Watches is a 1:1 super clone that reproduces the genuine Rolex reference at 98% visual and dimensional accuracy. The build matches the yellow gold tone, the green dial finish, and the Oyster bracelet geometry within tight tolerance. The price of $1,499 compares to a genuine retail near $43,000 at authorized Rolex dealers.
A Swiss-grade automatic clone of Rolex Caliber 4130 powers this Daytona 116508 super clone. The movement runs at 28,800 vibrations per hour, holds a 72-hour power reserve, and drives the chronograph through a vertical-clutch design. Performance matches the genuine caliber on frequency and autonomy, with a smooth sweeping seconds hand and a quiet winding rotor.
The chronograph on this 116508 super clone times elapsed events through the central seconds hand and two screw-down pushers. The top pusher starts and stops the central chronograph seconds hand, and the bottom pusher resets it to zero. The 30-minute counter at 3 o'clock and the 12-hour counter at 9 o'clock track longer elapsed times, while the small seconds at 6 o'clock shows the watch is running.
The tachymeter bezel on this Daytona 116508 super clone measures average speed over a fixed distance. A driver starts the chronograph at a marker, stops it at the next marker one mile or one kilometer away, and reads the speed where the chronograph seconds hand points on the engraved scale. The 116508 carries the scale engraved into the yellow gold bezel rather than printed on a ceramic insert.
The case uses a high-grade yellow gold-tone finish over a 904L stainless steel core rather than solid 18k yellow gold. This construction delivers the exact warm gold color, a substantial wrist weight, and durable scratch resistance for daily wear. Solid 18k yellow gold on the genuine Rolex 116508 adds roughly $40,000 to the retail price without changing the wrist-side appearance.
The 116508 has a green dial because Rolex chose green as a signature color option for the yellow gold Cosmograph Daytona. The green dial pairs with gold chronograph sub-dials and gold hour markers, and it became the most recognized face of this reference among collectors. This super clone reproduces that deep green tone and the gold counter contrast accurately.
The authentic Rolex Daytona 116508 retails near $43,000 at authorized dealers and trades higher on the secondary market. This super clone sells for $1,499, which delivers 98% visual and functional parity at roughly 3% of the genuine retail price. Buyers receive the full yellow gold Daytona wrist presence without the capital commitment.
A 1-year limited warranty covers movement defects and manufacturing faults on this Daytona 116508 super clone. Replacement parts sourcing runs through the originating factory via Super Clone Watches support. Movement servicing guidance is provided through WhatsApp and email for the lifetime of the watch.
