| Reference | 116500LN |
|---|---|
| Case | 40mm × 12.4mm, 904L stainless steel |
| Dial | Black with three chronograph sub-dials |
The Daytona 116500LN is the 40mm steel version of the Rolex Cosmograph Daytona, paired here with a black dial and the black Cerachrom ceramic bezel. This super clone reproduces the 116500LN reference with three chronograph sub-dials, an engraved tachymetric scale, and screw-down chronograph pushers for $1,449. Every proportion, sub-dial position, and bracelet link follows the genuine reference within tight production tolerance.
The Rolex Daytona 116500LN super clone carries a 40mm Oyster case measuring 12.4mm thick, built on a 904L stainless steel core for corrosion resistance and a bright, hard-wearing finish. The case combines brushed surfaces along the lugs with polished flanks, matching the genuine 116500LN finishing pattern.
The black Cerachrom ceramic bezel rings the dial with an engraved tachymetric scale that reads speed over a measured distance. Cerachrom is the ceramic bezel material Rolex developed to resist scratches and protect the engraved numerals from fading under sunlight. The screw-down chronograph pushers sit above and below the screw-down crown at 3 o'clock, sealing the case and supporting the 100-meter water resistance.
Scratch-resistant sapphire crystal with anti-reflective coating covers the black dial for clear reading at any angle. The flat profile sits close to the bezel line and resists daily knocks for years of use. The solid screw-down caseback seals the Caliber 4130 clone movement and holds water resistance to 100 meters, supported by the Triplock screw-down crown.
The black dial of this Daytona 116500LN super clone carries a deep, even black that frames the silver-ringed sub-dials with strong contrast. The dial holds applied metal hour markers coated in Chromalight luminescent material, which gives a long blue glow in low light.
The three sub-dials sit in the standard Daytona arrangement, and their positions are listed below.
The central chronograph seconds hand sweeps the full dial when the chronograph runs, and the markers stay legible against the black background.
The applied Rolex coronet sits at 12 o'clock above "Rolex Oyster Perpetual Superlative Chronometer" printed in fine text. The word "Cosmograph" sits above the 6 o'clock sub-dial in the genuine Daytona layout. The tachymetric scale on the bezel and the three balanced sub-dials give the 116500LN its recognized symmetry.
The Rolex Daytona 116500LN super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for a full weekend off the wrist.
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The chronograph starts, stops, and resets cleanly through the column-wheel and vertical-clutch design that the clone movement reproduces. The smooth sweeping seconds hand and the quiet rotor confirm the Swiss-grade build.
Spec grid:
The Daytona 116500LN super clone carries the Oyster bracelet, the three-piece flat-link design Rolex uses across its professional sport models. The bracelet uses a 904L stainless steel finish to match the case, with brushed outer links and polished center links that taper toward the wrist. The Daytona uses the Oyster bracelet and never a President bracelet.
The watch weighs approximately 145 grams on the full bracelet, giving the solid wrist presence buyers expect from a steel Daytona. The folding Oysterlock safety clasp locks shut and resists accidental opening during wear. The 40mm case and tapered Oyster bracelet sit comfortably on wrists from 6.5 to 8 inches.
The Rolex Daytona 116500LN super clone carries a 40mm Oyster case measuring 12.4mm thick, built on a 904L stainless steel core for corrosion resistance and a bright, hard-wearing finish. The case combines brushed surfaces along the lugs with polished flanks, matching the genuine 116500LN finishing pattern.
The black Cerachrom ceramic bezel rings the dial with an engraved tachymetric scale that reads speed over a measured distance. Cerachrom is the ceramic bezel material Rolex developed to resist scratches and protect the engraved numerals from fading under sunlight. The screw-down chronograph pushers sit above and below the screw-down crown at 3 o'clock, sealing the case and supporting the 100-meter water resistance.
Scratch-resistant sapphire crystal with anti-reflective coating covers the black dial for clear reading at any angle. The flat profile sits close to the bezel line and resists daily knocks for years of use. The solid screw-down caseback seals the Caliber 4130 clone movement and holds water resistance to 100 meters, supported by the Triplock screw-down crown.
The black dial of this Daytona 116500LN super clone carries a deep, even black that frames the silver-ringed sub-dials with strong contrast. The dial holds applied metal hour markers coated in Chromalight luminescent material, which gives a long blue glow in low light.
The three sub-dials sit in the standard Daytona arrangement, and their positions are listed below.
The central chronograph seconds hand sweeps the full dial when the chronograph runs, and the markers stay legible against the black background.
The applied Rolex coronet sits at 12 o'clock above "Rolex Oyster Perpetual Superlative Chronometer" printed in fine text. The word "Cosmograph" sits above the 6 o'clock sub-dial in the genuine Daytona layout. The tachymetric scale on the bezel and the three balanced sub-dials give the 116500LN its recognized symmetry.
The Rolex Daytona 116500LN super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for a full weekend off the wrist.
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The chronograph starts, stops, and resets cleanly through the column-wheel and vertical-clutch design that the clone movement reproduces. The smooth sweeping seconds hand and the quiet rotor confirm the Swiss-grade build.
Spec grid:
The Daytona 116500LN super clone carries the Oyster bracelet, the three-piece flat-link design Rolex uses across its professional sport models. The bracelet uses a 904L stainless steel finish to match the case, with brushed outer links and polished center links that taper toward the wrist. The Daytona uses the Oyster bracelet and never a President bracelet.
The watch weighs approximately 145 grams on the full bracelet, giving the solid wrist presence buyers expect from a steel Daytona. The folding Oysterlock safety clasp locks shut and resists accidental opening during wear. The 40mm case and tapered Oyster bracelet sit comfortably on wrists from 6.5 to 8 inches.
The Cosmograph Daytona offers several routes around the steel 116500LN, and the comparison of three variants is listed below.
| Variant | Case Metal | Bezel | Caliber | Super Clone Price |
|---|---|---|---|---|
| 116500LN (this reference) | 904L steel | Black Cerachrom ceramic | 4130 | $1,449 |
| 116508 | Yellow gold-tone | Yellow gold, engraved tachymetric | 4130 | $1,549 |
| 126500LN | 904L steel | Black Cerachrom ceramic | 4131 | $1,499 |
Buyers select the 116500LN for the steel case and the high-contrast black Cerachrom bezel, the most requested Daytona configuration. The 116508 buyer prefers the warmth and weight of a gold case. The 126500LN is the 2023 update with Caliber 4131 and a slightly revised case profile. The 116500LN Super Clone with a black dial gives the cleanest steel-and-black look of the group.
The Rolex Cosmograph Daytona launched in 1963 as a chronograph built for motor racing, named after the Daytona International Speedway in Florida. Rolex designed the model with a tachymetric scale bezel so a driver could read average speed over a measured distance. Early references used manual-wind movements, and Rolex moved the Daytona to an automatic chronograph in 1988. The reference 116500LN arrived in 2016 and introduced the black Cerachrom ceramic bezel to the steel Daytona, replacing the earlier steel bezel. The 116500LN runs Caliber 4130, the automatic chronograph Rolex developed in-house with a column wheel and a vertical clutch. The 116500LN Super Clone carries that racing heritage and the modern Cerachrom bezel onto the wrist.
Every Rolex Daytona 116500LN super clone passes a four-stage quality control sequence before shipping. The QC steps are listed below.
The 116500LN Super Clone ships in secure, discreet packaging to protect your privacy. The full package contents are listed below.
The Rolex Daytona 116500LN super clone ships within 24 hours of order confirmation via DHL Express or FedEx Priority with full insurance and discreet packaging. Worldwide delivery lands in 5 to 10 business days across the USA, UK, UAE, India, and Europe. Every watch carries a 1-year limited warranty covering movement defects, with replacement-parts support and servicing guidance provided after purchase. The support channels for the 116500LN Super Clone are listed below.
Real owners of the Rolex Daytona 116500LN super clone share the wrist-side verdict. Ratings average 4.9 / 5 across 162 verified orders.
"I have handled a genuine 116500LN, and the black Cerachrom bezel on this clone matches it closely. The tachymetric numerals are crisp and the finish is glossy. The black dial with the silver sub-dials reads clean. At $1,449 it punches far above the price."
"Shipped DHL and arrived in London in 7 days. The packaging was discreet exactly as described. The chronograph starts and stops with a firm click, and the reset snaps all three hands back to zero. The weight feels right for a steel sport Rolex."
"I was nervous spending this much on my first clone. WhatsApp support answered every question about the Caliber 4130 movement before I ordered. The watch arrived in a full box set with papers. The Oyster bracelet and Oysterlock clasp closed the deal for me."
Yes, the Rolex Daytona 116500LN sold on Super Clone Watches is a 1:1 super clone that reproduces the genuine Rolex reference at 98% visual and dimensional accuracy. The build matches the steel case finish, the black dial layout, the Cerachrom bezel, and the Oyster bracelet geometry within tight tolerance. The price of $1,449 compares to a genuine retail near $15,500 at authorized Rolex dealers.
The black ceramic bezel is a black Cerachrom insert, the ceramic bezel material Rolex uses on the genuine 116500LN. Cerachrom resists scratches and protects the engraved tachymetric numerals from fading under sunlight. This super clone reproduces the black Cerachrom bezel with the same engraved tachymetric scale, so the watch shows the high-contrast look of the genuine reference.
A Swiss-grade automatic clone of Rolex Caliber 4130 powers this Daytona 116500LN super clone. The movement runs at 28,800 vibrations per hour, holds a 72-hour power reserve, and drives the chronograph through the three sub-dials. Performance matches the genuine caliber on frequency and autonomy, with a smooth sweeping chronograph seconds hand and a clean start-stop-reset action.
Yes, the chronograph on this 116500LN super clone works as a fully functional stopwatch. The screw-down pushers start, stop, and reset the central chronograph seconds hand, the 30-minute counter at 3 o'clock, and the 12-hour counter at 9 o'clock. The Caliber 4130 clone movement drives all chronograph functions through a column-wheel mechanism.
The difference between the Daytona 116500LN and the 126500LN is the movement and a revised case profile. The 116500LN runs Caliber 4130, while the 126500LN released in 2023 runs the updated Caliber 4131. Both references use a 40mm steel case and the black Cerachrom ceramic bezel, and both super clones share the same black dial and Oyster bracelet on Super Clone Watches.
The authentic Rolex Daytona 116500LN retails near $15,500 at authorized dealers and trades far higher on the secondary market due to waiting lists. This super clone sells for $1,449, which delivers 98% visual and functional parity at roughly 9% of the genuine retail price. Buyers receive the full steel Daytona wrist presence without the capital commitment or the waiting list.
The Rolex Daytona 116500LN super clone ships via DHL Express or FedEx Priority with full insurance and tracked, signature-required delivery. The watch travels in secure, discreet packaging to protect your privacy. Transit time runs 5 to 10 business days to the USA, UK, UAE, India, and Europe, and the shipping cost is included in the price.
A 1-year limited warranty covers movement defects and manufacturing faults on this Daytona 116500LN super clone. Replacement parts sourcing runs through the originating factory via Super Clone Watches support. Movement servicing guidance is provided through WhatsApp and email for the lifetime of the watch.
