| Reference | 116508-0013 |
|---|---|
| Case | 40mm × 12.4mm, 18k yellow gold-tone |
| Dial | Green with gold-ringed chronograph sub-dials |
The Daytona 116508-0013 is the 40mm yellow gold version of the Rolex Cosmograph Daytona, paired here with a green dial and gold-ringed chronograph sub-dials. This super clone reproduces the 116508-0013 reference with a yellow gold tachymeter bezel, three chronograph counters, and the Oyster bracelet for $1,499. Every proportion, sub-dial ring, and bracelet link follows the genuine reference within tight production tolerance.
The Rolex Daytona 116508-0013 super clone carries a 40mm Oyster case measuring 12.4mm thick, built on a 904L stainless steel core with a high-grade yellow gold-tone finish for accurate color and long-term wear. Screw-down chronograph pushers flank the Twinlock screw-down crown at 3 o'clock, and each pusher locks down to support the 100-meter water resistance of the Cosmograph case.
The yellow gold tachymeter bezel rings the dial with an engraved tachymetric scale that reads units per hour against the chronograph seconds hand. This super clone engraves the scale with laser-aligned numerals so the figures stay crisp and evenly spaced around the rim. Mirror-polished surfaces wrap the case flanks and the bezel for the bright look gold is known for, while the lug tops carry a brushed finish for contrast.
Scratch-resistant sapphire crystal covers the green dial and resists daily knocks for years of clear reading, with an anti-reflective coating that keeps the dial legible in direct light. The solid screw-down caseback seals the Caliber 4130 clone movement and holds water resistance to 100 meters, supported by the Twinlock crown and the screw-down pushers.
The green dial of this Daytona 116508-0013 super clone carries a deep, even green that frames the warm yellow gold case with a rich, modern contrast. The dial holds applied yellow gold-tone hour markers, each polished and faceted to catch light against the green surface. The green base is the defining feature of the -0013 dial code within the 116508 reference.
The Daytona 116508-0013 super clone places three chronograph sub-dials on the green dial in the layout collectors expect from the Cosmograph. The sub-dial functions are listed below.
Each sub-dial carries a polished gold ring that lifts the counter off the green base. Gold-tone baton hands sweep the dial, and the central chronograph seconds hand reads against the tachymeter scale.
The applied Rolex coronet sits at 12 o'clock, with "Rolex Oyster Perpetual Superlative Chronometer Cosmograph" printed in crisp, fine text. The "Daytona" script arcs above the 6 o'clock sub-dial in a contrasting tone. The green dial and gold sub-dial rings give the 116508-0013 a balanced, symmetrical face.
The Rolex Daytona 116508-0013 super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve. Caliber 4130 is the column-wheel chronograph movement Rolex introduced for the Daytona in 2000, and this clone follows its vertical-clutch chronograph engagement for a clean pusher action.
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The chronograph seconds hand starts and stops cleanly through the screw-down pushers, and the 30-minute and 12-hour counters advance in step with the elapsed time. The smooth sweeping seconds hand and the quiet rotor confirm the Swiss-grade build of this 116508-0013 Super Clone.
Spec grid:
The Daytona 116508-0013 super clone carries the Oyster bracelet, the flat three-piece link design Rolex pairs with the Cosmograph Daytona. The bracelet uses a yellow gold-tone finish to match the case and the tachymeter bezel, with links that taper from the lugs toward the clasp. The Daytona uses the Oyster bracelet rather than the President bracelet, which Rolex reserves for the Day-Date.
The Oysterlock safety clasp closes with a folding cover that guards against accidental opening, and the Easylink extension adds about 5mm of on-the-fly comfort adjustment. The watch weighs approximately 145 grams on the full bracelet, giving the substantial wrist presence buyers expect from a gold Daytona. The 40mm case and tapered bracelet sit comfortably on wrists from 6.5 to 8 inches.
The Rolex Daytona 116508-0013 super clone carries a 40mm Oyster case measuring 12.4mm thick, built on a 904L stainless steel core with a high-grade yellow gold-tone finish for accurate color and long-term wear. Screw-down chronograph pushers flank the Twinlock screw-down crown at 3 o'clock, and each pusher locks down to support the 100-meter water resistance of the Cosmograph case.
The yellow gold tachymeter bezel rings the dial with an engraved tachymetric scale that reads units per hour against the chronograph seconds hand. This super clone engraves the scale with laser-aligned numerals so the figures stay crisp and evenly spaced around the rim. Mirror-polished surfaces wrap the case flanks and the bezel for the bright look gold is known for, while the lug tops carry a brushed finish for contrast.
Scratch-resistant sapphire crystal covers the green dial and resists daily knocks for years of clear reading, with an anti-reflective coating that keeps the dial legible in direct light. The solid screw-down caseback seals the Caliber 4130 clone movement and holds water resistance to 100 meters, supported by the Twinlock crown and the screw-down pushers.
The green dial of this Daytona 116508-0013 super clone carries a deep, even green that frames the warm yellow gold case with a rich, modern contrast. The dial holds applied yellow gold-tone hour markers, each polished and faceted to catch light against the green surface. The green base is the defining feature of the -0013 dial code within the 116508 reference.
The Daytona 116508-0013 super clone places three chronograph sub-dials on the green dial in the layout collectors expect from the Cosmograph. The sub-dial functions are listed below.
Each sub-dial carries a polished gold ring that lifts the counter off the green base. Gold-tone baton hands sweep the dial, and the central chronograph seconds hand reads against the tachymeter scale.
The applied Rolex coronet sits at 12 o'clock, with "Rolex Oyster Perpetual Superlative Chronometer Cosmograph" printed in crisp, fine text. The "Daytona" script arcs above the 6 o'clock sub-dial in a contrasting tone. The green dial and gold sub-dial rings give the 116508-0013 a balanced, symmetrical face.
The Rolex Daytona 116508-0013 super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve. Caliber 4130 is the column-wheel chronograph movement Rolex introduced for the Daytona in 2000, and this clone follows its vertical-clutch chronograph engagement for a clean pusher action.
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The chronograph seconds hand starts and stops cleanly through the screw-down pushers, and the 30-minute and 12-hour counters advance in step with the elapsed time. The smooth sweeping seconds hand and the quiet rotor confirm the Swiss-grade build of this 116508-0013 Super Clone.
Spec grid:
The Daytona 116508-0013 super clone carries the Oyster bracelet, the flat three-piece link design Rolex pairs with the Cosmograph Daytona. The bracelet uses a yellow gold-tone finish to match the case and the tachymeter bezel, with links that taper from the lugs toward the clasp. The Daytona uses the Oyster bracelet rather than the President bracelet, which Rolex reserves for the Day-Date.
The Oysterlock safety clasp closes with a folding cover that guards against accidental opening, and the Easylink extension adds about 5mm of on-the-fly comfort adjustment. The watch weighs approximately 145 grams on the full bracelet, giving the substantial wrist presence buyers expect from a gold Daytona. The 40mm case and tapered bracelet sit comfortably on wrists from 6.5 to 8 inches.
The yellow gold Daytona offers several dial and metal routes, and the 116508-0013 holds the green dial in solid yellow gold. The comparison of the three variants is listed below.
| Variant | Case Metal | Dial | Super Clone Price |
|---|---|---|---|
| 116508-0013 (this reference) | Yellow gold-tone | Green | $1,499 |
| 116508 (champagne) | Yellow gold-tone | Champagne | $1,499 |
| 116503 | Yellow gold and steel | Champagne | $1,399 |
Buyers select the 116508-0013 for the green dial, the dial code Rolex released in 2021 that quickly became the most requested yellow gold Daytona configuration. Champagne-dial buyers prefer the warm, classic gold-on-gold look. The two-tone 116503 buyers choose a lighter, more versatile metal mix at a lower tier. The 116508-0013 Super Clone gives the boldest dial contrast of the three.
The Rolex Cosmograph Daytona launched in 1963 as a chronograph built for motorsport timing, named for the Daytona International Speedway in Florida. Rolex fitted the early references with manual-wind movements, then moved to an automatic chronograph in 1988 with the Zenith-based Caliber 4030. The brand introduced its first fully in-house Daytona movement, Caliber 4130, in 2000, and reference 116508 carries that caliber in solid 18k yellow gold. Rolex added the green dial as dial code -0013 in 2021, which gave the yellow gold Cosmograph a fresh, sought-after look. The 116508-0013 Super Clone carries that combined heritage of the Cosmograph Daytona and the green-dial release onto the wrist.
Every Rolex Daytona 116508-0013 super clone passes a four-stage quality control sequence before shipping. The QC steps are listed below.
The 116508-0013 Super Clone ships in secure, discreet packaging to protect your privacy. The full package contents are listed below.
The Rolex Daytona 116508-0013 super clone ships within 24 hours of order confirmation via DHL Express or FedEx Priority with full insurance and discreet packaging. Worldwide delivery lands in 5 to 10 business days across the USA, UK, UAE, India, and Europe. Every watch carries a 1-year limited warranty covering movement defects, with replacement-parts support and servicing guidance provided after purchase. The support channels for the 116508-0013 Super Clone are listed below.
Real owners of the Rolex Daytona 116508-0013 super clone share the wrist-side verdict. Ratings average 4.9 / 5 across 162 verified orders.
"I wanted the green Daytona, and the green on this one is deep and even, not the bright tone some clones show. The gold sub-dial rings stand out against it. The Oyster bracelet feels heavy and tight. At $1,499 it looks like the real piece."
"Shipped DHL and arrived in Dubai in 6 days. The screw-down pushers unlock smoothly, and the chronograph starts and resets without any lag. The 30-minute and 12-hour counters track properly. The weight feels close to a real gold piece."
"I was nervous spending this much on my first clone. WhatsApp support answered every question before I ordered. The watch arrived in a full box set with papers. The tachymeter bezel engraving and the Oysterlock clasp closed the deal for me."
Yes, the Rolex Daytona 116508-0013 sold on Super Clone Watches is a 1:1 super clone that reproduces the genuine Rolex reference at 98% visual and dimensional accuracy. The build matches the yellow gold tone, the green dial finish, and the Oyster bracelet geometry within tight tolerance. The price of $1,499 compares to a genuine retail near $46,000 at authorized Rolex dealers.
The -0013 suffix is the Rolex dial code that identifies the green dial configuration of reference 116508. Rolex uses a four-digit dial code after the reference number to specify the exact dial finish, and -0013 marks the green dial with gold-ringed sub-dials. A separate generic 116508 listing on Super Clone Watches covers other dial variants of the same yellow gold Daytona reference.
A Swiss-grade automatic chronograph clone of Rolex Caliber 4130 powers this Daytona 116508-0013 super clone. The movement runs at 28,800 vibrations per hour, holds a 72-hour power reserve, and drives the chronograph through a column-wheel and vertical-clutch design. Performance matches the genuine caliber on frequency and autonomy, with a smooth sweeping seconds hand and a clean pusher action.
The case uses a high-grade yellow gold-tone finish over a 904L stainless steel core rather than solid 18k yellow gold. This construction delivers the exact warm gold color, a substantial wrist weight, and durable scratch resistance for daily wear. Solid 18k yellow gold on the genuine Rolex 116508 adds roughly $44,000 to the retail price without changing the wrist-side appearance.
Yes, the chronograph on this Daytona 116508-0013 super clone works as a full timing function. The screw-down pushers unlock to start, stop, and reset the central chronograph seconds hand, the 30-minute counter at 3 o'clock, and the 12-hour counter at 9 o'clock. The Caliber 4130 clone movement drives all three counters in step with the elapsed time.
The authentic Rolex Daytona 116508-0013 retails near $46,000 at authorized dealers and trades higher on the secondary market. This super clone sells for $1,499, which delivers 98% visual and functional parity at roughly 3% of the genuine retail price. Buyers receive the full yellow gold Daytona wrist presence without the capital commitment.
The Rolex Daytona 116508-0013 super clone ships via DHL Express or FedEx Priority with full insurance and tracked, signature-required delivery. The watch travels in secure, discreet packaging to protect your privacy. Transit time runs 5 to 10 business days to the USA, UK, UAE, India, and Europe, and the shipping cost is included in the price.
A 1-year limited warranty covers movement defects and manufacturing faults on this Daytona 116508-0013 super clone. Replacement parts sourcing runs through the originating factory via Super Clone Watches support. Movement servicing guidance is provided through WhatsApp and email for the lifetime of the watch.
