| Reference | 116515LN-0012 |
|---|---|
| Case | 40mm × 12.4mm, 18k Everose gold-tone |
| Dial | Black with Everose gold sub-dials |
The Daytona 116515LN is the 40mm Everose gold version of the Rolex Cosmograph Daytona, paired here with a black dial and a black Cerachrom ceramic bezel. This super clone reproduces the 116515LN-0012 reference with three Everose gold-detailed sub-dials, screw-down chronograph pushers, and an Oysterflex strap for $1,499. Every proportion, bezel scale marking, and strap detail follows the genuine reference within tight production tolerance.
The Rolex Daytona 116515LN super clone carries a 40mm Oyster case measuring 12.4mm thick, built on a 904L stainless steel core with a high-grade Everose gold-tone finish for accurate color and long-term wear. Everose is the rose gold alloy Rolex introduced in 2005, blended to hold its warm pink hue without fading, and this clone uses that deep rose tone across the case.
The black Cerachrom ceramic bezel rings the dial with a molded tachymetric scale that lets the wearer read average speed over a measured distance. This super clone uses a hardened ceramic bezel that resists scratching and holds its black finish, with the scale numerals filled to stand out against the dark surface. The Triplock screw-down crown and the two screw-down chronograph pushers sit at 3 o'clock, sealing the case and preventing accidental chronograph activation.
Scratch-resistant sapphire crystal with anti-reflective coating covers the black dial and resists daily knocks for years of clear reading. The solid screw-down caseback seals the chronograph movement and holds water resistance to 100 meters, supported by the Triplock crown system. The case sides carry mirror-polished surfaces with brushed lug tops for the finish contrast the genuine Daytona is known for.
The black dial of this Daytona 116515LN-0012 super clone carries a deep, even black that frames the warm Everose gold case with strong contrast. The dial holds applied Everose gold-tone hour markers with luminous fill, polished and faceted to catch light against the dark surface.
The Daytona 116515LN super clone displays three chronograph sub-dials in the genuine Cosmograph layout. The sub-dial positions are listed below.
Each sub-dial carries an Everose gold-tone ring border for contrast against the black dial, and the central chronograph seconds hand sweeps the full dial when the chronograph runs.
The applied Rolex coronet sits at 12 o'clock, with "Rolex Oyster Perpetual Superlative Chronometer Cosmograph Daytona" printed in crisp, fine text around the dial. Everose gold-tone baton hands carry luminous fill for low-light reading. The black dial and Everose gold detailing give the 116515LN a sharp, sporting balance against the warm rose case.
The Rolex Daytona 116515LN super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for three days off the wrist.
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The chronograph starts, stops, and resets cleanly through the two screw-down pushers, with the central seconds hand snapping back to zero on reset. The smooth running seconds at 6 o'clock and the quiet winding rotor confirm the Swiss-grade build.
Spec grid:
The Daytona 116515LN super clone carries the Oysterflex strap, the rubber strap Rolex introduced with a flexible titanium and nickel metal blade core under a black elastomer coating. The strap pairs the comfort of rubber with the rigidity of a metal bracelet, and it closes with an Everose gold-tone Oysterlock safety clasp that matches the case and bezel detailing.
The watch weighs approximately 95 grams on the Oysterflex strap, lighter than a full gold bracelet and balanced for sporting wear. Longitudinal cushions on the underside of the strap hold the watch steady against the wrist and improve airflow. The 40mm case and Oysterflex strap sit comfortably on wrists from 6.5 to 8 inches.
The Rolex Daytona 116515LN super clone carries a 40mm Oyster case measuring 12.4mm thick, built on a 904L stainless steel core with a high-grade Everose gold-tone finish for accurate color and long-term wear. Everose is the rose gold alloy Rolex introduced in 2005, blended to hold its warm pink hue without fading, and this clone uses that deep rose tone across the case.
The black Cerachrom ceramic bezel rings the dial with a molded tachymetric scale that lets the wearer read average speed over a measured distance. This super clone uses a hardened ceramic bezel that resists scratching and holds its black finish, with the scale numerals filled to stand out against the dark surface. The Triplock screw-down crown and the two screw-down chronograph pushers sit at 3 o'clock, sealing the case and preventing accidental chronograph activation.
Scratch-resistant sapphire crystal with anti-reflective coating covers the black dial and resists daily knocks for years of clear reading. The solid screw-down caseback seals the chronograph movement and holds water resistance to 100 meters, supported by the Triplock crown system. The case sides carry mirror-polished surfaces with brushed lug tops for the finish contrast the genuine Daytona is known for.
The black dial of this Daytona 116515LN-0012 super clone carries a deep, even black that frames the warm Everose gold case with strong contrast. The dial holds applied Everose gold-tone hour markers with luminous fill, polished and faceted to catch light against the dark surface.
The Daytona 116515LN super clone displays three chronograph sub-dials in the genuine Cosmograph layout. The sub-dial positions are listed below.
Each sub-dial carries an Everose gold-tone ring border for contrast against the black dial, and the central chronograph seconds hand sweeps the full dial when the chronograph runs.
The applied Rolex coronet sits at 12 o'clock, with "Rolex Oyster Perpetual Superlative Chronometer Cosmograph Daytona" printed in crisp, fine text around the dial. Everose gold-tone baton hands carry luminous fill for low-light reading. The black dial and Everose gold detailing give the 116515LN a sharp, sporting balance against the warm rose case.
The Rolex Daytona 116515LN super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for three days off the wrist.
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The chronograph starts, stops, and resets cleanly through the two screw-down pushers, with the central seconds hand snapping back to zero on reset. The smooth running seconds at 6 o'clock and the quiet winding rotor confirm the Swiss-grade build.
Spec grid:
The Daytona 116515LN super clone carries the Oysterflex strap, the rubber strap Rolex introduced with a flexible titanium and nickel metal blade core under a black elastomer coating. The strap pairs the comfort of rubber with the rigidity of a metal bracelet, and it closes with an Everose gold-tone Oysterlock safety clasp that matches the case and bezel detailing.
The watch weighs approximately 95 grams on the Oysterflex strap, lighter than a full gold bracelet and balanced for sporting wear. Longitudinal cushions on the underside of the strap hold the watch steady against the wrist and improve airflow. The 40mm case and Oysterflex strap sit comfortably on wrists from 6.5 to 8 inches.
The Cosmograph Daytona offers three main routes at the 40mm Caliber 4130 generation, and the 116515LN holds the Everose gold tier. The comparison of the three variants is listed below.
| Variant | Case Metal | Bezel | Strap or Bracelet | Super Clone Price |
|---|---|---|---|---|
| 116515LN (this reference) | Everose gold-tone | Black Cerachrom | Oysterflex | $1,499 |
| 116500LN | 904L steel | Black Cerachrom | Oyster bracelet | $1,299 |
| 116508 | Yellow gold-tone | Yellow gold | Oyster bracelet | $1,599 |
Buyers select the 116515LN for the warm Everose gold case paired with the sporting black ceramic bezel and the modern Oysterflex strap. Steel buyers prefer the 116500LN for the lower price and the everyday durability of the Oyster bracelet. Yellow gold buyers choose the 116508 for a fully traditional, openly luxurious look. The 116515LN-0012 Super Clone with a black dial gives the strongest contrast between the warm rose case and the dark face.
The Rolex Cosmograph Daytona launched in 1963 as a chronograph built for motorsport timing, named after the Daytona International Speedway in Florida. Early references used manual-wind movements such as Caliber 727, and the 16xxx generation moved to the automatic Caliber 4030. Rolex introduced the in-house Caliber 4130 in 2000, a movement built with fewer parts and a longer service interval. Rolex introduced Everose gold in 2005 as its own rose gold alloy, mixed to keep the pink hue stable over decades of wear. The 116515LN reference brought the Everose gold case together with the black Cerachrom bezel and the Oysterflex strap in 2011. The 116515LN-0012 Super Clone carries that combined heritage of the Cosmograph Daytona, Everose gold, and the Caliber 4130 onto the wrist.
Every Rolex Daytona 116515LN super clone passes a four-stage quality control sequence before shipping. The QC steps are listed below.
The 116515LN Super Clone ships in secure, discreet packaging to protect your privacy. The full package contents are listed below.
The Rolex Daytona 116515LN super clone ships within 24 hours of order confirmation via DHL Express or FedEx Priority with full insurance and discreet packaging. Worldwide delivery lands in 5 to 10 business days across the USA, UK, UAE, India, and Europe. Every watch carries a 1-year limited warranty covering movement defects, with replacement-parts support and servicing guidance provided after purchase. The support channels for the 116515LN Super Clone are listed below.
Real owners share the verdict.
I wanted the rose gold Daytona on the Oysterflex, and the Everose tone on this one is deep and warm, not the orange shade some clones show. The black ceramic bezel sets it off perfectly. At $1,499 it looks like the real piece on the wrist.
Shipped DHL and arrived in Dubai in 6 days. The packaging was discreet exactly as described. The pushers screw down properly, and the chronograph starts and resets to zero cleanly every time. The Oysterflex strap is comfortable in the heat.
I was nervous spending this much on my first clone. WhatsApp support answered every question about the Caliber 4130 movement before I ordered. The watch arrived in a full box set with papers. The sub-dials and the screw-down pushers closed the deal for me.
Yes, the Rolex Daytona 116515LN sold on Super Clone Watches is a 1:1 super clone that reproduces the genuine Rolex reference at 98% visual and dimensional accuracy. The build matches the Everose gold tone, the black dial finish, the black Cerachrom bezel, and the Oysterflex strap within tight tolerance. The price of $1,499 compares to a genuine retail near $42,000 at authorized Rolex dealers.
The -0012 suffix is the Rolex dial code that identifies the dial configuration on the 116515LN reference. This super clone is built to the -0012 code as a black dial with Everose gold sub-dial detailing. Rolex uses the same 116515LN reference with other dial codes for the chocolate dial and the rose dial variants, so the suffix tells the buyer exactly which dial is fitted.
A Swiss-grade automatic clone of Rolex Caliber 4130 powers this Daytona 116515LN super clone. The movement runs at 28,800 vibrations per hour, holds a 72-hour power reserve, and drives the chronograph to 12 elapsed hours through three sub-dials. Performance matches the genuine caliber on frequency and autonomy, with a clean chronograph start-stop-reset action and a quiet winding rotor.
The case uses a high-grade Everose gold-tone finish over a 904L stainless steel core rather than solid 18k Everose gold. This construction delivers the exact warm rose color, a substantial wrist weight, and durable scratch resistance for daily wear. Solid 18k Everose gold on the genuine Rolex 116515LN adds roughly $40,000 to the retail price without changing the wrist-side appearance.
Yes, the chronograph functions fully on this 116515LN super clone. The two screw-down pushers at 3 o'clock start, stop, and reset the chronograph, and the central seconds hand snaps back to zero on reset. The 30-minute counter at 3 o'clock and the 12-hour counter at 9 o'clock record elapsed time, while the small seconds at 6 o'clock shows the running time of the watch.
The authentic Rolex Daytona 116515LN retails near $42,000 at authorized dealers and trades higher on the secondary market. This super clone sells for $1,499, which delivers 98% visual and functional parity at roughly 4% of the genuine retail price. Buyers receive the full Everose gold Daytona wrist presence without the capital commitment.
The Rolex Daytona 116515LN super clone ships via DHL Express or FedEx Priority with full insurance and tracked, signature-required delivery. The watch travels in secure, discreet packaging to protect your privacy. Transit time runs 5 to 10 business days to the USA, UK, UAE, India, and Europe, and the shipping cost is included in the price.
A 1-year limited warranty covers movement defects and manufacturing faults on this Daytona 116515LN super clone. Replacement parts sourcing runs through the originating factory via Super Clone Watches support. Movement servicing guidance is provided through WhatsApp and email for the lifetime of the watch.
