| Reference | 116505-0013 |
|---|---|
| Case | 40mm × 12.4mm, 18k Everose gold-tone |
| Dial | Chocolate brown with Everose gold sub-dials |
The Daytona 116505-0013 is the 40mm Everose gold version of the Rolex Cosmograph Daytona, fitted here with the chocolate-brown dial identified by the -0013 dial code. This super clone matches the 116505 reference with Everose gold sub-dials, an engraved tachymeter bezel, and screw-down chronograph pushers for $1,499. Every proportion, bezel numeral, and bracelet link follows the genuine reference within tight production tolerance.
The Rolex Daytona 116505-0013 super clone carries a 40mm Oyster case measuring 12.4mm thick, built on a 904L stainless steel core with a high-grade Everose gold-tone finish for accurate color and long-term wear. Everose gold is the patented rose gold alloy Rolex introduced in 2005, blended to hold its warm pink hue without fading. The Triplock screw-down crown and the two screw-down chronograph pushers seal the case and support water resistance to 100 meters.
The Everose gold tachymeter bezel rings the dial with an engraved speed scale used to read average velocity over a measured distance. This super clone cuts and fills each numeral cleanly so the scale stays sharp against the polished gold. Mirror-polished surfaces wrap the lugs, the case sides, and the bezel for the bright look gold is known for, while the screw-down pushers thread firmly closed for a secure feel.
Scratch-resistant sapphire crystal covers the brown dial and resists daily knocks for years of clear reading. The Daytona crystal carries no Cyclops lens, since the Cosmograph dial has no date window. The solid screw-down caseback seals the Caliber 4130 clone movement and holds water resistance to 100 meters, supported by the Triplock crown system.
The chocolate-brown dial of this Daytona 116505-0013 super clone carries a warm, even brown identified by the genuine -0013 dial code. The dial holds applied Everose gold-tone hour markers, polished and faceted to catch light against the deep brown surface, with three sunken sub-dials ringed in Everose gold for clear contrast.
The Cosmograph layout places three sub-dials across the brown dial for the chronograph functions. The small running seconds sits at 6 o'clock, the 30-minute counter sits at 3 o'clock, and the 12-hour counter sits at 9 o'clock. The central chronograph seconds hand runs across the full dial when timing, while the Everose gold baton hands track the hours and minutes for the genuine Daytona reading.
The applied Rolex coronet sits at 12 o'clock, with "Rolex Oyster Perpetual Superlative Chronometer Cosmograph" printed in crisp, fine text. The tachymeter scale frames the dial through the engraved bezel rather than a printed ring. The chocolate-brown dial and Everose gold sub-dials give the 116505 a warm, balanced face that reads cleanly in any light.
The Rolex Daytona 116505-0013 super clone runs on a Swiss-grade automatic chronograph movement engineered to match the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for three full days off the wrist. The chronograph engages through a column wheel and a vertical clutch for clean start, stop, and reset action.
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The smooth sweeping chronograph seconds hand and the quiet rotor confirm the Swiss-grade build. The pushers start and stop the chronograph with a firm, defined click, and the reset returns all three hands to zero in a single press.
Spec grid:
The Daytona 116505-0013 super clone carries the Oyster bracelet, the flat three-piece-link design Rolex fits across its sport models. The bracelet uses an Everose gold-tone finish to match the case and the tachymeter bezel, with polished centre links and brushed outer links that taper from the lugs toward the wrist. The Cosmograph Daytona uses this Oyster bracelet and never a President bracelet.
The watch weighs approximately 145 grams on the full bracelet, giving the substantial wrist presence buyers expect from a gold Daytona. The folding Oysterlock safety clasp closes with a firm snap and adds a folding cover that guards against accidental opening. The 40mm case and tapered Oyster bracelet sit comfortably on wrists from 6.5 to 8 inches.
The Rolex Daytona 116505-0013 super clone carries a 40mm Oyster case measuring 12.4mm thick, built on a 904L stainless steel core with a high-grade Everose gold-tone finish for accurate color and long-term wear. Everose gold is the patented rose gold alloy Rolex introduced in 2005, blended to hold its warm pink hue without fading. The Triplock screw-down crown and the two screw-down chronograph pushers seal the case and support water resistance to 100 meters.
The Everose gold tachymeter bezel rings the dial with an engraved speed scale used to read average velocity over a measured distance. This super clone cuts and fills each numeral cleanly so the scale stays sharp against the polished gold. Mirror-polished surfaces wrap the lugs, the case sides, and the bezel for the bright look gold is known for, while the screw-down pushers thread firmly closed for a secure feel.
Scratch-resistant sapphire crystal covers the brown dial and resists daily knocks for years of clear reading. The Daytona crystal carries no Cyclops lens, since the Cosmograph dial has no date window. The solid screw-down caseback seals the Caliber 4130 clone movement and holds water resistance to 100 meters, supported by the Triplock crown system.
The chocolate-brown dial of this Daytona 116505-0013 super clone carries a warm, even brown identified by the genuine -0013 dial code. The dial holds applied Everose gold-tone hour markers, polished and faceted to catch light against the deep brown surface, with three sunken sub-dials ringed in Everose gold for clear contrast.
The Cosmograph layout places three sub-dials across the brown dial for the chronograph functions. The small running seconds sits at 6 o'clock, the 30-minute counter sits at 3 o'clock, and the 12-hour counter sits at 9 o'clock. The central chronograph seconds hand runs across the full dial when timing, while the Everose gold baton hands track the hours and minutes for the genuine Daytona reading.
The applied Rolex coronet sits at 12 o'clock, with "Rolex Oyster Perpetual Superlative Chronometer Cosmograph" printed in crisp, fine text. The tachymeter scale frames the dial through the engraved bezel rather than a printed ring. The chocolate-brown dial and Everose gold sub-dials give the 116505 a warm, balanced face that reads cleanly in any light.
The Rolex Daytona 116505-0013 super clone runs on a Swiss-grade automatic chronograph movement engineered to match the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for three full days off the wrist. The chronograph engages through a column wheel and a vertical clutch for clean start, stop, and reset action.
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The smooth sweeping chronograph seconds hand and the quiet rotor confirm the Swiss-grade build. The pushers start and stop the chronograph with a firm, defined click, and the reset returns all three hands to zero in a single press.
Spec grid:
The Daytona 116505-0013 super clone carries the Oyster bracelet, the flat three-piece-link design Rolex fits across its sport models. The bracelet uses an Everose gold-tone finish to match the case and the tachymeter bezel, with polished centre links and brushed outer links that taper from the lugs toward the wrist. The Cosmograph Daytona uses this Oyster bracelet and never a President bracelet.
The watch weighs approximately 145 grams on the full bracelet, giving the substantial wrist presence buyers expect from a gold Daytona. The folding Oysterlock safety clasp closes with a firm snap and adds a folding cover that guards against accidental opening. The 40mm case and tapered Oyster bracelet sit comfortably on wrists from 6.5 to 8 inches.
The Cosmograph Daytona offers several routes, and the 116505 holds the Everose gold tier in the pre-2023 Caliber 4130 generation. The comparison of three Daytona variants is listed below.
| Variant | Case Metal | Bezel | Super Clone Price |
|---|---|---|---|
| 116505 (this reference) | Everose gold-tone | Engraved tachymeter, Everose gold | $1,499 |
| 126500LN | 904L steel-tone | Black Cerachrom tachymeter | $1,299 |
| 116508 | Yellow gold-tone | Engraved tachymeter, yellow gold | $1,499 |
Buyers select the 116505 for the warm rose tone of Everose gold, a softer and more modern color than yellow gold. The 126500LN buyer prefers the steel case and the ceramic bezel for a sportier, more discreet look. The 116508 buyer favors the traditional richness of yellow gold. The 116505 Super Clone with the chocolate-brown dial gives the warmest, most distinctive face of the three.
The Rolex Cosmograph Daytona launched in 1963 as a chronograph built for motorsport, named after the Daytona International Speedway in Florida. Rolex fitted the model with a tachymetric scale so drivers could read average speed directly from the bezel. Early Daytona references used manual-wind movements such as Caliber 727, and the 16xxx generation moved to the automatic Caliber 4030. Rolex introduced the in-house Caliber 4130 in 2000, and the 116xxx references, including this 116505, run on that caliber. Rolex introduced Everose gold in 2005 as its patented rose gold alloy, mixed to keep the pink hue stable over decades of wear. The 116505 Super Clone carries that combined heritage of the Cosmograph chronograph and Everose gold onto the wrist.
Every Rolex Daytona 116505-0013 super clone passes a four-stage quality control sequence before shipping. The QC steps are listed below.
The 116505 Super Clone ships in secure, discreet packaging to protect your privacy. The full package contents are listed below.
The Rolex Daytona 116505-0013 super clone ships within 24 hours of order confirmation via DHL Express or FedEx Priority with full insurance and discreet packaging. Worldwide delivery lands in 5 to 10 business days across the USA, UK, UAE, India, and Europe. Every watch carries a 1-year limited warranty covering movement defects, with replacement-parts support and servicing guidance provided after purchase. The support channels for the 116505 Super Clone are listed below.
Real owners of the Rolex Daytona 116505-0013 super clone share the wrist-side verdict. Ratings average 4.9 / 5 across 162 verified orders.
"I wanted the Everose Daytona with the chocolate dial, and the brown on this one is warm and deep, not muddy. The Everose sub-dial rings stand out against it. The chronograph pushers click firmly and the reset snaps all three hands back to zero. At $1,499 it looks like the real piece."
"Shipped DHL and landed in Dubai in 6 days. The packaging was discreet exactly as described. The Everose gold tone is even across the case, bezel, and bracelet. The Oysterlock clasp closes with a solid snap and the weight feels close to a real gold Daytona."
"I was nervous spending this much on my first clone. WhatsApp support answered every question about the Caliber 4130 movement before I ordered. The watch arrived in a full box set with papers. The engraved tachymeter bezel and the sub-dial alignment closed the deal for me."
Yes, the Rolex Daytona 116505-0013 sold on Super Clone Watches is a 1:1 super clone that matches the genuine Rolex reference at 98% visual and dimensional accuracy. The build follows the Everose gold tone, the chocolate-brown dial finish, and the Oyster bracelet geometry within tight tolerance. The price of $1,499 compares to a genuine retail near $39,000 at authorized Rolex dealers.
The -0013 suffix on the Daytona 116505 is the Rolex dial code that identifies the chocolate-brown dial fitted to this reference. Rolex assigns a dial-code suffix to each dial variant of a reference, and -0013 marks the brown dial version. A separate Super Clone Watches listing covers the 116505 with the black dial under a different dial code.
A Swiss-grade automatic clone of Rolex Caliber 4130 powers this Daytona 116505-0013 super clone. The movement runs at 28,800 vibrations per hour, holds a 72-hour power reserve, and drives the chronograph through a column wheel and a vertical clutch. Performance matches the genuine caliber on frequency and autonomy, with a smooth sweeping chronograph seconds hand and a quiet winding rotor.
The case uses a high-grade Everose gold-tone finish over a 904L stainless steel core rather than solid 18k Everose gold. This construction delivers the warm rose color, a substantial wrist weight, and durable scratch resistance for daily wear. Solid 18k Everose gold on the genuine Rolex 116505 adds roughly $37,000 to the retail price without changing the wrist-side appearance.
The Daytona chronograph on this 116505 super clone times elapsed periods using three sub-dials and a central seconds hand. The central hand counts seconds when the chronograph runs, the 30-minute counter at 3 o'clock tracks minutes, and the 12-hour counter at 9 o'clock tracks hours. The top pusher starts and stops the timing, and the lower pusher resets all three hands to zero.
The authentic Rolex Cosmograph Daytona 116505 retails near $39,000 at authorized dealers and trades higher on the secondary market. This super clone sells for $1,499, which delivers 98% visual and functional parity at roughly 4% of the genuine retail price. Buyers receive the full Everose gold Daytona wrist presence without the capital commitment.
The Rolex Daytona 116505-0013 super clone ships via DHL Express or FedEx Priority with full insurance and tracked, signature-required delivery. The watch travels in secure, discreet packaging to protect your privacy. Transit time runs 5 to 10 business days to the USA, UK, UAE, India, and Europe, and the shipping cost is included in the price.
A 1-year limited warranty covers movement defects and manufacturing faults on this Daytona 116505-0013 super clone. Replacement parts sourcing runs through the originating factory via Super Clone Watches support. Movement servicing guidance is provided through WhatsApp and email for the lifetime of the watch.
