| Reference | 116518LN |
|---|---|
| Case | 40mm × 12.4mm, 18k yellow gold-tone |
| Dial | Champagne-gold with yellow gold sub-dials |
The Daytona 116518LN is the 40mm yellow gold version of the Rolex Cosmograph Daytona, paired here with a champagne-gold dial and the black Cerachrom ceramic bezel. This super clone follows the 116518LN reference with three yellow gold chronograph sub-dials, a tachymetric scale, and the Oysterflex rubber strap for $1,499. Every proportion, sub-dial position, and pusher detail follows the genuine reference within tight production tolerance.
The Rolex Daytona 116518LN super clone carries a 40mm Oyster case measuring 12.4mm thick, built on a 904L stainless steel core with a high-grade yellow gold-tone finish for accurate color and long-term wear. The two chronograph pushers screw down on either side of the crown, sealing the case and protecting the chronograph function from accidental engagement.
The black Cerachrom ceramic bezel rings the dial with a molded tachymetric scale graduated from 400 to 60 units per hour. Cerachrom is the ceramic material Rolex uses for its bezels, chosen because it resists scratches and holds its color under sunlight. This super clone reproduces the deep black ceramic finish with crisp yellow gold-tone numerals filled into the scale.
Scratch-resistant sapphire crystal with anti-reflective coating covers the champagne dial and keeps the chronograph readout clear in direct light. The Triplock screw-down crown sits at 3 o'clock between the two screw-down pushers, engraved with the Rolex coronet. The solid screw-down caseback seals the movement and holds water resistance to 100 meters for the Daytona 116518LN.
The champagne-gold dial of this Daytona 116518LN super clone carries a warm metallic gold tone that matches the yellow gold case. The dial holds three sunken chronograph sub-dials, each finished in a contrasting yellow gold tone with concentric ring texture for clear separation from the main dial surface.
The three sub-dials sit at 9, 6, and 3 o'clock and track the chronograph functions. The small running seconds appear at 9 o'clock, the 30-minute counter sits at 3 o'clock, and the 12-hour counter sits at 6 o'clock. Applied yellow gold-tone hour markers and baton hands carry luminous fill, while the central chronograph seconds hand sweeps the full dial when the chronograph runs.
The applied Rolex coronet sits at 12 o'clock with "Rolex Oyster Perpetual Superlative Chronometer Cosmograph Daytona" printed in fine, crisp text. The outer minute track frames the dial for precise chronograph timing against the tachymetric bezel scale. The champagne dial and three yellow gold sub-dials give the 116518LN a balanced, warm-toned chronograph layout.
The Rolex Daytona 116518LN super clone runs on a Swiss-grade automatic chronograph movement engineered to follow the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for three days off the wrist.
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The chronograph engages cleanly when the top pusher is pressed and resets crisply through the lower pusher. The smooth sweeping chronograph seconds hand and the quiet winding rotor confirm the Swiss-grade build of the 116518LN super clone.
Spec grid:
The Daytona 116518LN super clone carries the Oysterflex strap, the rubber strap Rolex developed with a flexible metal blade core for support and durability. The strap pairs a yellow gold-tone Oysterlock safety clasp with a black elastomer outer coating, giving the comfort of rubber with the security of a metal clasp.
The watch weighs approximately 110 grams on the Oysterflex strap, lighter than a full gold bracelet while keeping a solid gold-case presence. The Oysterflex strap flexes with the wrist and resists heat, sweat, and water for daily and active wear. The 40mm case and the Oysterflex strap sit comfortably on wrists from 6.5 to 8 inches.
The Rolex Daytona 116518LN super clone carries a 40mm Oyster case measuring 12.4mm thick, built on a 904L stainless steel core with a high-grade yellow gold-tone finish for accurate color and long-term wear. The two chronograph pushers screw down on either side of the crown, sealing the case and protecting the chronograph function from accidental engagement.
The black Cerachrom ceramic bezel rings the dial with a molded tachymetric scale graduated from 400 to 60 units per hour. Cerachrom is the ceramic material Rolex uses for its bezels, chosen because it resists scratches and holds its color under sunlight. This super clone reproduces the deep black ceramic finish with crisp yellow gold-tone numerals filled into the scale.
Scratch-resistant sapphire crystal with anti-reflective coating covers the champagne dial and keeps the chronograph readout clear in direct light. The Triplock screw-down crown sits at 3 o'clock between the two screw-down pushers, engraved with the Rolex coronet. The solid screw-down caseback seals the movement and holds water resistance to 100 meters for the Daytona 116518LN.
The champagne-gold dial of this Daytona 116518LN super clone carries a warm metallic gold tone that matches the yellow gold case. The dial holds three sunken chronograph sub-dials, each finished in a contrasting yellow gold tone with concentric ring texture for clear separation from the main dial surface.
The three sub-dials sit at 9, 6, and 3 o'clock and track the chronograph functions. The small running seconds appear at 9 o'clock, the 30-minute counter sits at 3 o'clock, and the 12-hour counter sits at 6 o'clock. Applied yellow gold-tone hour markers and baton hands carry luminous fill, while the central chronograph seconds hand sweeps the full dial when the chronograph runs.
The applied Rolex coronet sits at 12 o'clock with "Rolex Oyster Perpetual Superlative Chronometer Cosmograph Daytona" printed in fine, crisp text. The outer minute track frames the dial for precise chronograph timing against the tachymetric bezel scale. The champagne dial and three yellow gold sub-dials give the 116518LN a balanced, warm-toned chronograph layout.
The Rolex Daytona 116518LN super clone runs on a Swiss-grade automatic chronograph movement engineered to follow the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for three days off the wrist.
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The chronograph engages cleanly when the top pusher is pressed and resets crisply through the lower pusher. The smooth sweeping chronograph seconds hand and the quiet winding rotor confirm the Swiss-grade build of the 116518LN super clone.
Spec grid:
The Daytona 116518LN super clone carries the Oysterflex strap, the rubber strap Rolex developed with a flexible metal blade core for support and durability. The strap pairs a yellow gold-tone Oysterlock safety clasp with a black elastomer outer coating, giving the comfort of rubber with the security of a metal clasp.
The watch weighs approximately 110 grams on the Oysterflex strap, lighter than a full gold bracelet while keeping a solid gold-case presence. The Oysterflex strap flexes with the wrist and resists heat, sweat, and water for daily and active wear. The 40mm case and the Oysterflex strap sit comfortably on wrists from 6.5 to 8 inches.
The pre-2023 Cosmograph Daytona offers three main routes, and the 116518LN holds the yellow gold Oysterflex tier. The comparison of the three variants is listed below.
| Variant | Case Metal | Strap or Bracelet | Super Clone Price |
|---|---|---|---|
| 116518LN (this reference) | Yellow gold-tone | Oysterflex rubber strap | $1,499 |
| 116508 | Yellow gold-tone | Oyster bracelet | $1,499 |
| 116500LN | 904L steel | Oyster bracelet | $1,299 |
Buyers select the 116518LN for the warm gold case paired with the sporty, comfortable Oysterflex rubber strap. The 116508 buyers prefer the full yellow gold Oyster bracelet for a heavier, more formal look. The 116500LN buyers choose the steel case at a lower tier. The 116518LN Super Clone with a champagne dial gives the lightest gold-case option of the three.
The Rolex Cosmograph Daytona launched in 1963 as a chronograph built for motorsport timing, with a tachymetric bezel scale for reading average speed. Rolex named the model after the Daytona International Speedway in Florida, the home of American endurance racing. Early references used manual-wind movements, and the 16xxx generation introduced the self-winding Caliber 4030 based on a Zenith El Primero base. Rolex launched the in-house Caliber 4130 in 2000, and the 116518LN reference carries that movement with a black Cerachrom ceramic bezel introduced on gold Daytona models in 2011. The 116518LN Super Clone carries that combined heritage of the Cosmograph Daytona and the Caliber 4130 onto the wrist.
Every Rolex Daytona 116518LN super clone passes a four-stage quality control sequence before shipping. The QC steps are listed below.
The 116518LN Super Clone ships in secure, discreet packaging to protect your privacy. The full package contents are listed below.
The Rolex Daytona 116518LN super clone ships within 24 hours of order confirmation via DHL Express or FedEx Priority with full insurance and discreet packaging. Worldwide delivery lands in 5 to 10 business days across the USA, UK, UAE, India, and Europe. Every watch carries a 1-year limited warranty covering movement defects, with replacement-parts support and servicing guidance provided after purchase. The support channels for the 116518LN Super Clone are listed below.
Real owners share the verdict.
"I wanted the gold Daytona on rubber, and the champagne dial on this one sits warm against the yellow gold case. The black ceramic bezel is glossy and deep. The chronograph pushers screw down tight just like the real reference. At $1,499 it looks like the genuine piece."
"I was nervous spending this much on my first clone. WhatsApp support answered every question before I ordered. The watch arrived in a full box set with papers. The sub-dial alignment and the Cerachrom bezel sealed the deal for me."
"Shipped DHL and arrived in Dubai in 6 days. The packaging was discreet exactly as described. The chronograph starts and stops cleanly, and the reset snaps all three hands back to zero. The Oysterflex strap is comfortable in the heat here."
Yes, the Rolex Daytona 116518LN sold on Super Clone Watches is a 1:1 super clone that follows the genuine Rolex reference at 98% visual and dimensional accuracy. The build matches the yellow gold tone, the champagne dial finish, and the black Cerachrom bezel within tight tolerance. The price of $1,499 compares to a genuine retail near $34,000 at authorized Rolex dealers.
A Swiss-grade automatic clone of Rolex Caliber 4130 powers this Daytona 116518LN super clone. The movement runs at 28,800 vibrations per hour, holds a 72-hour power reserve, and drives the chronograph start, stop, and reset functions. Performance follows the genuine caliber on frequency and autonomy, with a smooth sweeping chronograph seconds hand and a quiet winding rotor.
The Cerachrom bezel is the black ceramic tachymeter bezel that Rolex introduced on gold Cosmograph Daytona models in 2011. Rolex uses Cerachrom ceramic because it resists scratches and holds its black color under sunlight. This super clone reproduces the deep black ceramic finish with a molded tachymetric scale and yellow gold-tone numerals.
The case uses a high-grade yellow gold-tone finish over a 904L stainless steel core rather than solid 18k yellow gold. This construction delivers the exact warm gold color, a solid wrist weight, and durable scratch resistance for daily wear. Solid 18k yellow gold on the genuine Rolex 116518LN adds roughly $32,000 to the retail price without changing the wrist-side appearance.
Yes, the chronograph function works on this Daytona 116518LN super clone. The top pusher starts and stops the central chronograph seconds hand, the 30-minute counter at 3 o'clock, and the 12-hour counter at 6 o'clock. The lower pusher resets all three chronograph hands to zero, and the Caliber 4130 clone movement drives the full chronograph mechanism.
The authentic Rolex Cosmograph Daytona 116518LN retails near $34,000 at authorized dealers and trades higher on the secondary market. This super clone sells for $1,499, which delivers 98% visual and functional parity at roughly 4% of the genuine retail price. Buyers receive the full yellow gold Daytona wrist presence without the capital commitment.
The Rolex Daytona 116518LN super clone ships via DHL Express or FedEx Priority with full insurance and tracked, signature-required delivery. The watch travels in secure, discreet packaging to protect your privacy. Transit time runs 5 to 10 business days to the USA, UK, UAE, India, and Europe, and the shipping cost is included in the price.
A 1-year limited warranty covers movement defects and manufacturing faults on this Daytona 116518LN super clone. Replacement parts sourcing runs through the originating factory via Super Clone Watches support. Movement servicing guidance is provided through WhatsApp and email for the lifetime of the watch.
