| Reference | 116515LN |
|---|---|
| Case | 40mm × 12.4mm, 18k Everose gold-tone |
| Dial | White with Everose gold-ringed sub-dials |
The Cosmograph Daytona 116515LN is the 40mm Everose gold version of the Rolex Daytona, paired here with a white dial and a black Cerachrom ceramic bezel. This super clone reproduces the 116515LN reference with three Everose gold-ringed chronograph sub-dials, a screw-down pusher layout, and an Oysterflex rubber strap for $1,499. Every proportion, sub-dial position, and bezel scale follows the genuine reference within tight production tolerance.
The Rolex Cosmograph Daytona 116515LN super clone carries a 40mm Oyster case measuring 12.4mm thick, built on a 904L stainless steel core with a high-grade Everose gold-tone finish for accurate color and long-term wear. Everose is the rose gold alloy Rolex introduced in 2005, blended to hold its warm pink hue without fading, and this clone reproduces that deep rose tone across the case, lugs, and crown.
The black Cerachrom monobloc bezel rings the dial with a molded tachymetric scale used to calculate average speed over distance. This super clone forms the bezel in scratch-resistant ceramic with a recessed scale, so the numerals hold their finish against daily contact. The screw-down chronograph pushers flank the screw-down Twinlock crown at 3 o'clock, each engraved and protected to keep the chronograph sealed during use.
Scratch-resistant sapphire crystal with anti-reflective treatment covers the white dial and resists daily knocks for years of clear reading. The Daytona carries no Cyclops lens, since the reference has no date window, leaving the crystal flat and unbroken. The solid screw-down caseback seals the movement and holds water resistance to 100 meters, supported by the Twinlock crown system and the screw-down pushers.
The white dial of this Daytona 116515LN super clone carries a clean lacquered white surface that frames the warm Everose gold case and the black bezel with high contrast. The dial holds applied Everose gold-tone hour markers, each polished and faceted to catch light, with luminous fill for low-light reading.
The white dial holds three chronograph sub-dials, each ringed in Everose gold for definition against the white background. The three sub-dial functions are listed below.
The central chronograph seconds hand sweeps the full dial to time intervals against the tachymetric bezel scale. Everose gold-tone baton hands display the running hours and minutes, with luminous fill matched to the markers. The applied Rolex coronet sits at 12 o'clock with "Rolex Cosmograph Daytona" printed in crisp, fine text, giving the 116515LN a balanced, legible layout.
The Rolex Cosmograph Daytona 116515LN super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for a full weekend off the wrist.
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The vertical-clutch chronograph starts, stops, and resets cleanly through the screw-down pushers, with no stutter on the central seconds hand. The smooth sweeping seconds hand and the quiet rotor confirm the Swiss-grade build of this 116515LN Super Clone.
Spec grid:
The Daytona 116515LN super clone carries the Oysterflex strap, the high-performance rubber strap Rolex introduced in 2015. The strap pairs a flexible metal blade core with a black elastomer overmold, so it holds the structure of a bracelet with the comfort and durability of rubber. An Everose gold-tone Oysterlock safety clasp secures the strap and matches the case finish.
The watch weighs approximately 110 grams on the Oysterflex strap, lighter than a full gold bracelet while keeping a substantial gold case presence. Longitudinal cushions on the inner face of the strap hold it slightly off the skin for airflow and comfort across the day. The 40mm case and Oysterflex strap sit comfortably on wrists from 6.5 to 8 inches.
The Rolex Cosmograph Daytona 116515LN super clone carries a 40mm Oyster case measuring 12.4mm thick, built on a 904L stainless steel core with a high-grade Everose gold-tone finish for accurate color and long-term wear. Everose is the rose gold alloy Rolex introduced in 2005, blended to hold its warm pink hue without fading, and this clone reproduces that deep rose tone across the case, lugs, and crown.
The black Cerachrom monobloc bezel rings the dial with a molded tachymetric scale used to calculate average speed over distance. This super clone forms the bezel in scratch-resistant ceramic with a recessed scale, so the numerals hold their finish against daily contact. The screw-down chronograph pushers flank the screw-down Twinlock crown at 3 o'clock, each engraved and protected to keep the chronograph sealed during use.
Scratch-resistant sapphire crystal with anti-reflective treatment covers the white dial and resists daily knocks for years of clear reading. The Daytona carries no Cyclops lens, since the reference has no date window, leaving the crystal flat and unbroken. The solid screw-down caseback seals the movement and holds water resistance to 100 meters, supported by the Twinlock crown system and the screw-down pushers.
The white dial of this Daytona 116515LN super clone carries a clean lacquered white surface that frames the warm Everose gold case and the black bezel with high contrast. The dial holds applied Everose gold-tone hour markers, each polished and faceted to catch light, with luminous fill for low-light reading.
The white dial holds three chronograph sub-dials, each ringed in Everose gold for definition against the white background. The three sub-dial functions are listed below.
The central chronograph seconds hand sweeps the full dial to time intervals against the tachymetric bezel scale. Everose gold-tone baton hands display the running hours and minutes, with luminous fill matched to the markers. The applied Rolex coronet sits at 12 o'clock with "Rolex Cosmograph Daytona" printed in crisp, fine text, giving the 116515LN a balanced, legible layout.
The Rolex Cosmograph Daytona 116515LN super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for a full weekend off the wrist.
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The vertical-clutch chronograph starts, stops, and resets cleanly through the screw-down pushers, with no stutter on the central seconds hand. The smooth sweeping seconds hand and the quiet rotor confirm the Swiss-grade build of this 116515LN Super Clone.
Spec grid:
The Daytona 116515LN super clone carries the Oysterflex strap, the high-performance rubber strap Rolex introduced in 2015. The strap pairs a flexible metal blade core with a black elastomer overmold, so it holds the structure of a bracelet with the comfort and durability of rubber. An Everose gold-tone Oysterlock safety clasp secures the strap and matches the case finish.
The watch weighs approximately 110 grams on the Oysterflex strap, lighter than a full gold bracelet while keeping a substantial gold case presence. Longitudinal cushions on the inner face of the strap hold it slightly off the skin for airflow and comfort across the day. The 40mm case and Oysterflex strap sit comfortably on wrists from 6.5 to 8 inches.
The Cosmograph Daytona offers several routes at the super clone tier, and the 116515LN holds the Everose gold and Oysterflex position. The comparison of three Daytona variants is listed below.
| Variant | Case Metal | Bezel | Strap or Bracelet | Super Clone Price |
|---|---|---|---|---|
| 116515LN (this reference) | Everose gold-tone | Black Cerachrom | Oysterflex rubber | $1,499 |
| 126500LN | 904L steel | Black Cerachrom | Oyster bracelet | $1,399 |
| 116508 | Yellow gold-tone | Yellow gold-tone | Oyster bracelet | $1,599 |
Buyers select the 116515LN for the warm rose tone of Everose gold combined with the modern, sporty feel of the Oysterflex rubber strap. Steel buyers prefer the lighter 126500LN on the Oyster bracelet as the everyday option. Yellow gold buyers choose the 116508 for the traditional all-gold look. The 116515LN Super Clone with a white dial gives the cleanest contrast against the black ceramic bezel.
The Rolex Cosmograph Daytona launched in 1963 as a chronograph built for motorsport, named for the Daytona International Speedway and fitted with a tachymetric bezel to calculate average speed. Rolex moved the model to its own automatic chronograph movement, Caliber 4130, in 2000, reducing the part count and adding the 72-hour power reserve. Rolex introduced Everose gold in 2005 as its own rose gold alloy, mixed to keep the pink hue stable over decades of wear. The Everose gold Daytona arrived with the 116515LN, which paired the rose gold case with a black Cerachrom ceramic bezel and the Oysterflex rubber strap, giving the model a sport-luxury position the steel and solid-gold references do not occupy. The 116515LN Super Clone carries that combined heritage of Everose gold, the Cerachrom bezel, and the Cosmograph Daytona onto the wrist.
Every Rolex Cosmograph Daytona 116515LN super clone passes a four-stage quality control sequence before shipping. The four QC steps are listed below.
The 116515LN Super Clone ships in secure, discreet packaging to protect your privacy. The full package contents are listed below.
The Rolex Cosmograph Daytona 116515LN super clone ships within 24 hours of order confirmation via DHL Express or FedEx Priority with full insurance and discreet packaging. Worldwide delivery lands in 5 to 10 business days across the USA, UK, UAE, India, and Europe. Every watch carries a 1-year limited warranty covering movement defects, with replacement-parts support and servicing guidance provided after purchase. The support channels for the 116515LN Super Clone are listed below.
Real owners of the Rolex Cosmograph Daytona 116515LN super clone share the wrist-side verdict. Ratings average 4.9 / 5 across 162 verified orders.
"I wanted the rose gold Daytona on rubber, and the Everose tone on this one is deep and even, not the orange shade some clones show. The white dial with the gold sub-dial rings looks sharp against the black ceramic bezel. At $1,499 it wears like the real piece."
"Shipped DHL and arrived in Dubai in 6 days. The packaging was discreet exactly as described. The pushers screw down properly and the chronograph starts and resets with no stutter. The Oysterflex strap is comfortable in the heat."
"I was nervous spending this much on my first clone. WhatsApp support answered every question about the Caliber 4130 movement before I ordered. The watch arrived in a full box set with papers. The Cerachrom bezel and the Oysterlock clasp closed the deal for me."
Yes, the Rolex Cosmograph Daytona 116515LN sold on Super Clone Watches is a 1:1 super clone that reproduces the genuine Rolex reference at 98% visual and dimensional accuracy. The build matches the Everose gold tone, the white dial finish, the black Cerachrom bezel, and the Oysterflex strap geometry within tight tolerance. The price of $1,499 compares to a genuine retail near $44,000 at authorized Rolex dealers.
A Swiss-grade automatic clone of Rolex Caliber 4130 powers this Daytona 116515LN super clone. The movement runs at 28,800 vibrations per hour, holds a 72-hour power reserve, and drives the chronograph functions through the three sub-dials. Performance matches the genuine caliber on frequency and autonomy, with a smooth sweeping chronograph seconds hand and a quiet winding rotor.
Everose gold is the rose gold alloy Rolex introduced in 2005 and uses on the genuine 116515LN. Rolex blends the alloy to hold its warm pink hue without fading over decades of wear. This super clone reproduces that deep Everose tone through a high-grade gold-tone finish over a steel core, so the case shows the same warm rose color as the genuine reference.
The case uses a high-grade Everose gold-tone finish over a 904L stainless steel core rather than solid 18k Everose gold. This construction delivers the exact warm rose color, a substantial wrist weight, and durable scratch resistance for daily wear. Solid 18k Everose gold on the genuine Rolex 116515LN adds roughly $42,000 to the retail price without changing the wrist-side appearance.
Yes, the chronograph functions on this 116515LN super clone. The screw-down pushers at 2 and 4 o'clock start, stop, and reset the central chronograph seconds hand, while the 30-minute and 12-hour counters record elapsed time. The Caliber 4130 clone movement drives the chronograph through a vertical-clutch system for a clean start with no hand stutter.
The authentic Rolex Cosmograph Daytona 116515LN retails near $44,000 at authorized dealers and trades higher on the secondary market. This super clone sells for $1,499, which delivers 98% visual and functional parity at roughly 3% of the genuine retail price. Buyers receive the full Everose gold Daytona wrist presence without the capital commitment.
The Daytona 116515LN super clone comes on an Oysterflex rubber strap with an Everose gold-tone Oysterlock safety clasp. The Oysterflex pairs a flexible metal blade core with a black elastomer overmold, giving the strap the structure of a bracelet and the comfort of rubber. The strap suits daily wear, warm climates, and active use better than a metal bracelet.
A 1-year limited warranty covers movement defects and manufacturing faults on this Daytona 116515LN super clone. Replacement parts sourcing runs through the originating factory via Super Clone Watches support. Movement servicing guidance is provided through WhatsApp and email for the lifetime of the watch.
