| Reference | 126500LN |
|---|---|
| Case | 40mm × 11.9mm, 904L stainless steel |
| Dial | White Panda with black sub-dials |
The Daytona 126500LN is the new-generation steel Cosmograph from the 2023 Rolex update, paired here with the white Panda dial and the black Cerachrom bezel. This super clone reproduces the 126500LN reference with three black chronograph counters, an Oyster bracelet, and screw-down pushers for $1,499. Every proportion, bezel engraving, and bracelet link follows the genuine reference within tight production tolerance.
The Rolex Daytona 126500LN super clone carries a 40mm Oyster case measuring 11.9mm thick, machined from 904L stainless steel for accurate color, weight, and corrosion resistance. The 2023 generation widened the case-to-bezel proportion slightly over the prior 116500LN, and this clone follows the updated profile with redrawn lug lines and a thinner bezel ring.
The black Cerachrom bezel rings the dial with an engraved tachymetric scale used to read average speed over a measured distance. Cerachrom is the ceramic material Rolex uses for its bezels, and the clone bezel resists scratching and UV fading the same way. The screw-down chronograph pushers sit at 2 and 4 o'clock around the Triplock screw-down crown, and each pusher unscrews to operate the chronograph.
Scratch-resistant sapphire crystal with anti-reflective coating covers the Panda dial and resists daily knocks for years of clear reading. The solid screw-down caseback seals the movement and holds water resistance to 100 meters, supported by the Triplock crown system. The case sides show alternating polished and brushed finishing that matches the genuine reference under close inspection.
The white Panda dial of this Daytona 126500LN super clone carries a bright lacquered white surface with three contrasting black sub-dials, the layout that gives the Panda its name. The dial holds applied luminous hour markers and a sharp printed minute track for fast legibility against the white ground.
The dial features three chronograph sub-dials in the standard Daytona layout. The three counters are listed below.
The central chronograph seconds hand sweeps from the dial center and times intervals to the tachymeter scale. The luminous hour and minute hands read clearly in low light.
The applied Rolex coronet sits at 12 o'clock above "Rolex Oyster Perpetual Superlative Chronometer," with "Cosmograph Daytona" printed in red above the 6 o'clock counter. The black sub-dials carry fine concentric rings and white printed scales. The white Panda dial and black counters give the 126500LN a high-contrast, motorsport-rooted balance.
The Rolex Daytona 126500LN super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4131 in feel, frequency, and autonomy. Caliber 4131 is the new-generation Daytona movement Rolex introduced in 2023, and the clone operates at 28,800 vibrations per hour with a 72-hour power reserve for three full days off the wrist.
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4131. The chronograph starts, stops, and resets cleanly through the screw-down pushers, and the central seconds hand returns flush to zero on reset. The smooth sweeping seconds and quiet winding rotor confirm the Swiss-grade build.
Spec grid:
The Daytona 126500LN super clone carries the three-piece-link Oyster bracelet in 904L stainless steel, the bracelet Rolex pairs with the steel Daytona. The bracelet uses brushed outer links and a polished center link, and it tapers from the lugs toward the folding Oysterlock safety clasp.
The watch weighs approximately 145 grams on the full bracelet, giving the solid sport-chronograph presence buyers expect from a steel Daytona. The Oysterlock clasp closes with a flip-lock cover that guards against accidental opening. The 40mm case and tapered Oyster bracelet sit comfortably on wrists from 6.5 to 8 inches.
The Rolex Daytona 126500LN super clone carries a 40mm Oyster case measuring 11.9mm thick, machined from 904L stainless steel for accurate color, weight, and corrosion resistance. The 2023 generation widened the case-to-bezel proportion slightly over the prior 116500LN, and this clone follows the updated profile with redrawn lug lines and a thinner bezel ring.
The black Cerachrom bezel rings the dial with an engraved tachymetric scale used to read average speed over a measured distance. Cerachrom is the ceramic material Rolex uses for its bezels, and the clone bezel resists scratching and UV fading the same way. The screw-down chronograph pushers sit at 2 and 4 o'clock around the Triplock screw-down crown, and each pusher unscrews to operate the chronograph.
Scratch-resistant sapphire crystal with anti-reflective coating covers the Panda dial and resists daily knocks for years of clear reading. The solid screw-down caseback seals the movement and holds water resistance to 100 meters, supported by the Triplock crown system. The case sides show alternating polished and brushed finishing that matches the genuine reference under close inspection.
The white Panda dial of this Daytona 126500LN super clone carries a bright lacquered white surface with three contrasting black sub-dials, the layout that gives the Panda its name. The dial holds applied luminous hour markers and a sharp printed minute track for fast legibility against the white ground.
The dial features three chronograph sub-dials in the standard Daytona layout. The three counters are listed below.
The central chronograph seconds hand sweeps from the dial center and times intervals to the tachymeter scale. The luminous hour and minute hands read clearly in low light.
The applied Rolex coronet sits at 12 o'clock above "Rolex Oyster Perpetual Superlative Chronometer," with "Cosmograph Daytona" printed in red above the 6 o'clock counter. The black sub-dials carry fine concentric rings and white printed scales. The white Panda dial and black counters give the 126500LN a high-contrast, motorsport-rooted balance.
The Rolex Daytona 126500LN super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4131 in feel, frequency, and autonomy. Caliber 4131 is the new-generation Daytona movement Rolex introduced in 2023, and the clone operates at 28,800 vibrations per hour with a 72-hour power reserve for three full days off the wrist.
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4131. The chronograph starts, stops, and resets cleanly through the screw-down pushers, and the central seconds hand returns flush to zero on reset. The smooth sweeping seconds and quiet winding rotor confirm the Swiss-grade build.
Spec grid:
The Daytona 126500LN super clone carries the three-piece-link Oyster bracelet in 904L stainless steel, the bracelet Rolex pairs with the steel Daytona. The bracelet uses brushed outer links and a polished center link, and it tapers from the lugs toward the folding Oysterlock safety clasp.
The watch weighs approximately 145 grams on the full bracelet, giving the solid sport-chronograph presence buyers expect from a steel Daytona. The Oysterlock clasp closes with a flip-lock cover that guards against accidental opening. The 40mm case and tapered Oyster bracelet sit comfortably on wrists from 6.5 to 8 inches.
The steel Daytona offers two dial choices in the current generation plus the prior reference, and the 126500LN holds the 2023 Caliber 4131 update. The comparison of the three options is listed below.
| Variant | Dial | Movement | Super Clone Price |
|---|---|---|---|
| 126500LN Panda (this reference) | White, black sub-dials | Caliber 4131 | $1,499 |
| 126500LN Black | Black, white sub-dials | Caliber 4131 | $1,499 |
| 116500LN | White or black | Caliber 4130 | $1,399 |
Buyers select the 126500LN Panda for the high-contrast white dial with black counters, the most recognizable Daytona look. Black-dial buyers prefer the reverse-Panda layout for a darker, lower-key presence. The 116500LN buyer wants the prior generation with Caliber 4130 at a slightly lower price. The 126500LN Panda Super Clone gives the current case proportions and the latest movement caliber.
The Rolex Cosmograph Daytona launched in 1963 as a chronograph built for motorsport drivers, with a tachymetric bezel scale for reading average speed. Rolex named the model after Daytona International Speedway in Florida, the home of American endurance racing. Early references used manual-wind movements, and Rolex moved the Daytona to an automatic chronograph in 1988 with Caliber 4030. The in-house Caliber 4130 followed in 2000, and the 2023 update introduced Caliber 4131 in the 126500LN with a redesigned case and an open caseback option on precious-metal models. The 126500LN Super Clone carries that racing heritage and the latest Daytona caliber onto the wrist.
Every Rolex Daytona 126500LN super clone passes a four-stage quality control sequence before shipping. The QC steps are listed below.
The 126500LN Super Clone ships in secure, discreet packaging to protect your privacy. The full package contents are listed below.
The Rolex Daytona 126500LN super clone ships within 24 hours of order confirmation via DHL Express or FedEx Priority with full insurance and discreet packaging. Worldwide delivery lands in 5 to 10 business days across the USA, UK, UAE, India, and Europe. Every watch carries a 1-year limited warranty covering movement defects, with replacement-parts support and servicing guidance provided after purchase. The support channels for the 126500LN Super Clone are listed below.
Real owners of the Rolex Daytona 126500LN super clone share the wrist-side verdict. Ratings average 4.9 / 5 across 163 verified orders.
"I wanted the white Panda Daytona, and the black sub-dials on this one sit perfectly against the white. The Cerachrom bezel has a deep black gloss. The chronograph pushers screw down tight, and the seconds hand resets clean to zero. At $1,499 it reads like the genuine piece."
"Shipped DHL and reached me in 6 days. The packaging was discreet exactly as described. The Oyster bracelet has the right weight, and the Oysterlock clasp snaps shut firmly. The sub-dial rings look sharp under a loupe."
"I was nervous spending this much on my first clone. WhatsApp support answered every question about the Caliber 4131 movement before I ordered. The watch arrived in a full box set with papers. The chronograph works smoothly and the case finishing closed the deal for me."
Yes, the Rolex Daytona 126500LN sold on Super Clone Watches is a 1:1 super clone that reproduces the genuine Rolex reference at 98% visual and dimensional accuracy. The build matches the white Panda dial, the black Cerachrom bezel, and the Oyster bracelet geometry within tight tolerance. The price of $1,499 compares to a genuine retail near $15,500 at authorized Rolex dealers.
A Swiss-grade automatic clone of Rolex Caliber 4131 powers this Daytona 126500LN super clone. Caliber 4131 is the new-generation Daytona movement Rolex introduced in 2023, and the clone runs at 28,800 vibrations per hour with a 72-hour power reserve. The chronograph starts, stops, and resets cleanly through the screw-down pushers.
A Panda dial is a white watch dial with contrasting black sub-dials, and the Daytona 126500LN Panda uses this layout across its three chronograph counters. The white lacquered ground and the three black counters create the high-contrast face that gives the configuration its name. The Panda dial is the most recognizable Daytona look and a long-running collector favorite.
Yes, the bezel on this 126500LN super clone uses a black ceramic material that reproduces the genuine Rolex Cerachrom bezel. The ceramic bezel resists scratching and holds its black color under UV exposure rather than fading. The engraved tachymetric scale matches the genuine reference for reading average speed over distance.
The chronograph on the Daytona 126500LN works through two screw-down pushers at 2 and 4 o'clock that operate the central seconds hand. The top pusher starts and stops the timing, and the bottom pusher resets the central seconds hand to zero. The 30-minute counter at 3 o'clock and the 12-hour counter at 9 o'clock track longer elapsed intervals.
The authentic Rolex Daytona 126500LN retails near $15,500 at authorized dealers and trades well above retail on the secondary market. This super clone sells for $1,499, which delivers 98% visual and functional parity at roughly 10% of the genuine retail price. Buyers receive the full steel Daytona wrist presence without the capital commitment or the dealer waitlist.
The Rolex Daytona 126500LN super clone ships via DHL Express or FedEx Priority with full insurance and tracked, signature-required delivery. The watch travels in secure, discreet packaging to protect your privacy. Transit time runs 5 to 10 business days to the USA, UK, UAE, India, and Europe, and the shipping cost is included in the price.
A 1-year limited warranty covers movement defects and manufacturing faults on this Daytona 126500LN super clone. Replacement parts sourcing runs through the originating factory via Super Clone Watches support. Movement servicing guidance is provided through WhatsApp and email for the lifetime of the watch.
