| Reference | 116500LN |
|---|---|
| Case | 40mm × 12.4mm, Oyster steel |
| Dial | Blue sunray-brushed with three sub-dials |
The Daytona 116500LN is the steel version of the Rolex Cosmograph Daytona, configured here with a blue sunray-brushed dial and the black Cerachrom ceramic bezel. This super clone reproduces the 116500LN reference with three chronograph sub-dials, screw-down pushers, and an Oyster bracelet for $1,399. Every case angle, bezel scale marking, and sub-dial position follows the genuine reference within tight production tolerance.
The Rolex Daytona 116500LN super clone carries a 40mm Oyster case measuring 12.4mm thick, built on a 904L stainless steel core for accurate color, weight, and corrosion resistance. The case sides show the sharp polished and brushed contrast that defines the steel Daytona, and the screw-down chronograph pushers thread into the case to hold water resistance at 100 meters.
The black Cerachrom ceramic bezel rings the dial with a moulded tachymetric scale that measures average speed over a fixed distance. Cerachrom is the hard ceramic Rolex introduced to the steel Daytona in 2016, and this super clone reproduces the deep black gloss and the fade-proof, scratch-resistant surface. The tachymetric numerals sit clean and evenly spaced around the bezel.
Scratch-resistant sapphire crystal covers the blue sunray dial and resists daily knocks for years of clear reading. The Daytona crystal carries no Cyclops lens, since the chronograph has no date window, so the dial reads flat and unbroken. The solid screw-down caseback seals the chronograph movement and holds water resistance to 100 meters, supported by the Triplock screw-down crown.
The blue sunray-brushed dial of this Daytona 116500LN super clone carries a fine radial brushing that fans out from the center, so the blue shifts from bright to deep as the wrist turns under light. This sunray finish is the "sun flower" effect named in the brief, and the super clone reproduces the even radial grain across the full dial surface.
The dial holds three chronograph sub-dials in the genuine Daytona positions. The small seconds counter sits at 6 o'clock, the 30-minute chronograph counter sits at 3 o'clock, and the 12-hour chronograph counter sits at 9 o'clock. Each sub-dial carries a contrasting ring that lifts it clear of the blue surface for fast reading.
The dial holds applied baton hour markers and applied hands with luminous fill for low-light legibility. The applied Rolex coronet sits at 12 o'clock, with "Rolex Oyster Perpetual Superlative Chronometer Cosmograph Daytona" printed in crisp, fine text. The central chronograph seconds hand sweeps the full dial when the chronograph runs, while the small seconds counter at 6 o'clock tracks the running movement.
The Rolex Daytona 116500LN super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for a full weekend off the wrist.
The chronograph starts, stops, and resets through the two screw-down pushers, and the central seconds hand returns cleanly to zero on reset. Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The smooth sweeping chronograph seconds hand and the quiet rotor confirm the Swiss-grade build.
Spec grid:
The Daytona 116500LN super clone carries the Oyster bracelet, the flat three-piece-link steel design Rolex pairs with the steel Cosmograph. The bracelet uses a brushed-and-polished finish to match the case, with solid links that taper smoothly from the lugs toward the wrist. The folding Oysterlock safety clasp closes with a secure click and guards against accidental opening.
The watch weighs approximately 145 grams on the full steel bracelet, giving the solid wrist presence buyers expect from a steel Daytona. The Oysterlock clasp holds the bracelet firmly and the Easylink comfort extension allows a 5mm on-the-fly adjustment. The 40mm case and tapered Oyster bracelet sit comfortably on wrists from 6.5 to 8 inches.
The Rolex Daytona 116500LN super clone carries a 40mm Oyster case measuring 12.4mm thick, built on a 904L stainless steel core for accurate color, weight, and corrosion resistance. The case sides show the sharp polished and brushed contrast that defines the steel Daytona, and the screw-down chronograph pushers thread into the case to hold water resistance at 100 meters.
The black Cerachrom ceramic bezel rings the dial with a moulded tachymetric scale that measures average speed over a fixed distance. Cerachrom is the hard ceramic Rolex introduced to the steel Daytona in 2016, and this super clone reproduces the deep black gloss and the fade-proof, scratch-resistant surface. The tachymetric numerals sit clean and evenly spaced around the bezel.
Scratch-resistant sapphire crystal covers the blue sunray dial and resists daily knocks for years of clear reading. The Daytona crystal carries no Cyclops lens, since the chronograph has no date window, so the dial reads flat and unbroken. The solid screw-down caseback seals the chronograph movement and holds water resistance to 100 meters, supported by the Triplock screw-down crown.
The blue sunray-brushed dial of this Daytona 116500LN super clone carries a fine radial brushing that fans out from the center, so the blue shifts from bright to deep as the wrist turns under light. This sunray finish is the "sun flower" effect named in the brief, and the super clone reproduces the even radial grain across the full dial surface.
The dial holds three chronograph sub-dials in the genuine Daytona positions. The small seconds counter sits at 6 o'clock, the 30-minute chronograph counter sits at 3 o'clock, and the 12-hour chronograph counter sits at 9 o'clock. Each sub-dial carries a contrasting ring that lifts it clear of the blue surface for fast reading.
The dial holds applied baton hour markers and applied hands with luminous fill for low-light legibility. The applied Rolex coronet sits at 12 o'clock, with "Rolex Oyster Perpetual Superlative Chronometer Cosmograph Daytona" printed in crisp, fine text. The central chronograph seconds hand sweeps the full dial when the chronograph runs, while the small seconds counter at 6 o'clock tracks the running movement.
The Rolex Daytona 116500LN super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for a full weekend off the wrist.
The chronograph starts, stops, and resets through the two screw-down pushers, and the central seconds hand returns cleanly to zero on reset. Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The smooth sweeping chronograph seconds hand and the quiet rotor confirm the Swiss-grade build.
Spec grid:
The Daytona 116500LN super clone carries the Oyster bracelet, the flat three-piece-link steel design Rolex pairs with the steel Cosmograph. The bracelet uses a brushed-and-polished finish to match the case, with solid links that taper smoothly from the lugs toward the wrist. The folding Oysterlock safety clasp closes with a secure click and guards against accidental opening.
The watch weighs approximately 145 grams on the full steel bracelet, giving the solid wrist presence buyers expect from a steel Daytona. The Oysterlock clasp holds the bracelet firmly and the Easylink comfort extension allows a 5mm on-the-fly adjustment. The 40mm case and tapered Oyster bracelet sit comfortably on wrists from 6.5 to 8 inches.
The steel Daytona 116500LN offers three main dial routes, and this build holds the blue sunray-brushed configuration. The comparison of the three dial variants is listed below.
| Variant | Dial | Sub-Dial Style | Super Clone Price |
|---|---|---|---|
| 116500LN Blue Sunray (this build) | Blue sunray-brushed | Contrasting rings | $1,399 |
| 116500LN Black | Matte black | Silver counters | $1,399 |
| 116500LN White | Lacquer white "Panda" | Black counters | $1,399 |
Buyers select the blue sunray dial for the radial brushing that shifts tone with light and gives the steel Daytona a distinct, modern character. Black dial buyers prefer the classic understated Cosmograph look. White dial buyers choose the high-contrast "Panda" layout with black counters. The blue sunray 116500LN Super Clone gives the most movement and depth of the three under daily light.
The Rolex Cosmograph Daytona launched in 1963 as a chronograph built for motorsport timing, named for the Daytona International Speedway in Florida. Rolex placed a tachymetric scale on the bezel so a driver reads average speed directly from the running chronograph. The Daytona built collector demand through decades of motorsport association and a long-running production wait at authorized dealers. Rolex moved the steel Daytona to the black Cerachrom ceramic bezel in 2016 with reference 116500LN, replacing the earlier steel bezel. The 116500LN carries Caliber 4130, the chronograph movement Rolex introduced in 2000 as its first fully in-house automatic chronograph. The 116500LN Super Clone carries that Cosmograph heritage onto the wrist with a blue sunray dial.
Every Rolex Daytona 116500LN super clone passes a four-stage quality control sequence before shipping. The QC steps are listed below.
The 116500LN Super Clone ships in secure, discreet packaging to protect your privacy. The full package contents are listed below.
The Rolex Daytona 116500LN super clone ships within 24 hours of order confirmation via DHL Express or FedEx Priority with full insurance and discreet packaging. Worldwide delivery lands in 5 to 10 business days across the USA, UK, UAE, India, and Europe. Every watch carries a 1-year limited warranty covering movement defects, with replacement-parts support and servicing guidance provided after purchase. The support channels for the 116500LN Super Clone are listed below.
Real owners of the Rolex Daytona 116500LN super clone share the wrist-side verdict. Ratings average 4.9 / 5 across 168 verified orders.
"I wanted the blue Daytona, and the sunray brushing on this one really moves under light, bright near the center and deep at the edges. The black ceramic bezel sets it off well. The chronograph pushers screw down tight. At $1,399 it looks like the real piece."
"Shipped DHL and arrived in Dubai in 6 days. The packaging was discreet exactly as described. The chronograph starts and resets cleanly, and the central seconds hand snaps back to zero. The steel weight feels close to a real Daytona."
"I was nervous spending this much on my first clone. WhatsApp support answered every question before I ordered. The watch arrived in a full box set with papers. The Cerachrom bezel and the Oysterlock clasp closed the deal for me."
Yes, the Rolex Daytona 116500LN sold on Super Clone Watches is a 1:1 super clone that reproduces the genuine Rolex reference at 98% visual and dimensional accuracy. The build matches the steel Oyster case, the blue sunray dial finish, the black Cerachrom bezel, and the Oyster bracelet geometry within tight tolerance. The price of $1,399 compares to a genuine retail near $15,500 at authorized Rolex dealers.
The blue sunray dial is a blue dial finished with a fine radial brushing that fans out from the center. The brushing catches light and shifts the blue from bright to deep as the wrist turns, which the brief describes as a "sun flower" pattern. This super clone reproduces that even radial grain across the full dial surface for the same depth as a sunburst finish on the genuine reference.
A Swiss-grade automatic clone of Rolex Caliber 4130 powers this Daytona 116500LN super clone. The movement runs at 28,800 vibrations per hour, holds a 72-hour power reserve, and drives the chronograph start, stop, and reset functions. Performance matches the genuine caliber on frequency and autonomy, with a smooth sweeping chronograph seconds hand and a quiet winding rotor.
Yes, the chronograph pushers and bezel work like the genuine Daytona on this 116500LN super clone. The two screw-down pushers start, stop, and reset the chronograph, and the central seconds hand returns to zero on reset. The black Cerachrom bezel carries a fixed tachymetric scale that reads average speed directly from the running chronograph.
The Daytona has no Cyclops lens or date window because the Cosmograph Daytona is a chronograph without a date complication. The 116500LN dial holds three chronograph sub-dials in place of a date, so the sapphire crystal stays flat and unbroken. This super clone follows the genuine reference layout exactly, with no date aperture on the blue sunray dial.
The authentic Rolex Daytona 116500LN retails near $15,500 at authorized dealers and trades well above retail on the secondary market due to long waiting lists. This super clone sells for $1,399, which delivers 98% visual and functional parity at roughly 9% of the genuine retail price. Buyers receive the full steel Daytona wrist presence without the capital commitment or the dealer wait.
The Rolex Daytona 116500LN super clone ships via DHL Express or FedEx Priority with full insurance and tracked, signature-required delivery. The watch travels in secure, discreet packaging to protect your privacy. Transit time runs 5 to 10 business days to the USA, UK, UAE, India, and Europe, and the shipping cost is included in the price.
A 1-year limited warranty covers movement defects and manufacturing faults on this Daytona 116500LN super clone. Replacement parts sourcing runs through the originating factory via Super Clone Watches support. Movement servicing guidance is provided through WhatsApp and email for the lifetime of the watch.
