| Reference | 116500LN-0001 |
|---|---|
| Case | 40mm × 12.4mm, 904L stainless steel |
| Dial | White mother of pearl with black sub-dials |
The Cosmograph Daytona 116500LN is the steel version of the Rolex Daytona, paired here with a white mother of pearl dial and the black Cerachrom ceramic bezel. This super clone reproduces the 116500LN reference with three chronograph sub-dials, screw-down pushers, and the Oyster bracelet for $1,499. Every proportion, bezel engraving, and bracelet link follows the genuine reference within tight production tolerance.
The Rolex Cosmograph Daytona 116500LN super clone carries a 40mm Oyster case measuring 12.4mm thick, built from 904L stainless steel for accurate color, hardness, and corrosion resistance through years of daily wear. The screw-down chronograph pushers flank the Twinlock crown at 3 o'clock, and each pusher threads closed to seal the case and start, stop, or reset the chronograph only when unscrewed.
The black Cerachrom bezel rings the dial with an engraved tachymetric scale that reads average speed over a measured distance. This super clone uses a hard ceramic bezel insert that resists scratches and holds its deep black color without fading under sunlight. The engraved numerals and graduations sit flush in the ceramic for clean legibility against the white mother of pearl dial.
Scratch-resistant sapphire crystal covers the mother of pearl dial and resists daily knocks for years of clear reading. The Daytona uses a flat sapphire crystal with no date lens, since the 116500LN has no date function. The solid screw-down caseback seals the Caliber 4130 clone movement and holds water resistance to 100 meters, supported by the Twinlock crown and screw-down pushers.
The white mother of pearl dial of this Daytona 116500LN super clone shows the natural shimmer and shifting iridescence of cut shell, giving each piece a slightly individual surface. The dial holds applied hour markers coated with luminous material and three contrasting black sub-dials that frame the chronograph counters with sharp definition.
The three sub-dials sit in the genuine Daytona layout, with small running seconds at 6 o'clock, the 30-minute counter at 3 o'clock, and the 12-hour counter at 9 o'clock. The central chronograph seconds hand sweeps the full dial when the chronograph runs. The applied Rolex coronet sits at 12 o'clock with "Rolex Oyster Perpetual Superlative Chronometer Cosmograph Daytona" printed in fine, crisp text.
Luminous baton hands and applied markers carry a long-lasting glow for low-light reading. The central seconds hand and the three sub-dial hands move with clean travel and precise return to zero on reset. The white mother of pearl surface and the black sub-dials give the 116500LN a high-contrast, modern reading face.
The Rolex Cosmograph Daytona 116500LN super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for a full weekend off the wrist.
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The vertical-clutch chronograph design starts the central seconds hand without the stutter seen on cheaper movements. The 30-minute and 12-hour counters track elapsed time, and the reset returns all three chronograph hands cleanly to zero.
Spec grid:
The Daytona 116500LN super clone carries the Oyster bracelet, the three-piece flat-link design Rolex uses across its professional sport models. The bracelet uses 904L stainless steel to match the case, with brushed outer links and polished center links that taper from the lugs toward the wrist. The Oysterlock folding clasp closes with a safety catch that guards against accidental opening.
The watch weighs approximately 145 grams on the full steel bracelet, giving the solid wrist presence buyers expect from a steel Daytona. The Oysterlock clasp includes the Easylink 5mm comfort extension, which adjusts the bracelet length without tools. The 40mm case and tapered Oyster bracelet sit comfortably on wrists from 6.5 to 8 inches.
The Rolex Cosmograph Daytona 116500LN super clone carries a 40mm Oyster case measuring 12.4mm thick, built from 904L stainless steel for accurate color, hardness, and corrosion resistance through years of daily wear. The screw-down chronograph pushers flank the Twinlock crown at 3 o'clock, and each pusher threads closed to seal the case and start, stop, or reset the chronograph only when unscrewed.
The black Cerachrom bezel rings the dial with an engraved tachymetric scale that reads average speed over a measured distance. This super clone uses a hard ceramic bezel insert that resists scratches and holds its deep black color without fading under sunlight. The engraved numerals and graduations sit flush in the ceramic for clean legibility against the white mother of pearl dial.
Scratch-resistant sapphire crystal covers the mother of pearl dial and resists daily knocks for years of clear reading. The Daytona uses a flat sapphire crystal with no date lens, since the 116500LN has no date function. The solid screw-down caseback seals the Caliber 4130 clone movement and holds water resistance to 100 meters, supported by the Twinlock crown and screw-down pushers.
The white mother of pearl dial of this Daytona 116500LN super clone shows the natural shimmer and shifting iridescence of cut shell, giving each piece a slightly individual surface. The dial holds applied hour markers coated with luminous material and three contrasting black sub-dials that frame the chronograph counters with sharp definition.
The three sub-dials sit in the genuine Daytona layout, with small running seconds at 6 o'clock, the 30-minute counter at 3 o'clock, and the 12-hour counter at 9 o'clock. The central chronograph seconds hand sweeps the full dial when the chronograph runs. The applied Rolex coronet sits at 12 o'clock with "Rolex Oyster Perpetual Superlative Chronometer Cosmograph Daytona" printed in fine, crisp text.
Luminous baton hands and applied markers carry a long-lasting glow for low-light reading. The central seconds hand and the three sub-dial hands move with clean travel and precise return to zero on reset. The white mother of pearl surface and the black sub-dials give the 116500LN a high-contrast, modern reading face.
The Rolex Cosmograph Daytona 116500LN super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for a full weekend off the wrist.
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The vertical-clutch chronograph design starts the central seconds hand without the stutter seen on cheaper movements. The 30-minute and 12-hour counters track elapsed time, and the reset returns all three chronograph hands cleanly to zero.
Spec grid:
The Daytona 116500LN super clone carries the Oyster bracelet, the three-piece flat-link design Rolex uses across its professional sport models. The bracelet uses 904L stainless steel to match the case, with brushed outer links and polished center links that taper from the lugs toward the wrist. The Oysterlock folding clasp closes with a safety catch that guards against accidental opening.
The watch weighs approximately 145 grams on the full steel bracelet, giving the solid wrist presence buyers expect from a steel Daytona. The Oysterlock clasp includes the Easylink 5mm comfort extension, which adjusts the bracelet length without tools. The 40mm case and tapered Oyster bracelet sit comfortably on wrists from 6.5 to 8 inches.
The steel Daytona 116500LN offers three main dial routes, and this listing holds the white mother of pearl variant. The comparison of the three dial options is listed below.
| Variant | Dial | Bezel | Super Clone Price |
|---|---|---|---|
| 116500LN-0001 MOP (this listing) | White mother of pearl | Black Cerachrom | $1,499 |
| 116500LN-0001 | White lacquer ("Panda") | Black Cerachrom | $1,499 |
| 116500LN-0002 | Black lacquer ("Reverse Panda") | Black Cerachrom | $1,499 |
Buyers select the mother of pearl dial for its natural shimmer and individual surface, a softer and more distinctive look than flat lacquer. White lacquer buyers prefer the classic "Panda" contrast of black sub-dials on a bright white face. Black dial buyers choose the "Reverse Panda" for a darker, more understated read. The 116500LN Super Clone with a mother of pearl dial gives the most individual character of the three.
The Rolex Cosmograph Daytona launched in 1963 as a chronograph built for motorsport timing, named after the Daytona International Speedway in Florida. Rolex added the tachymetric scale to the bezel so drivers could read average speed over a measured distance. The early references used manual-wind movements, and Rolex moved the line to its first in-house automatic chronograph, Caliber 4130, with the 116520 in 2000. Rolex released the 116500LN in 2016, the first steel Daytona with a black Cerachrom ceramic bezel in place of the earlier steel or aluminum inserts. The 116500LN Super Clone carries that combined heritage of the Cosmograph chronograph and the modern Cerachrom bezel onto the wrist.
Every Rolex Cosmograph Daytona 116500LN super clone passes a four-stage quality control sequence before shipping. The QC steps are listed below.
The 116500LN Super Clone ships in secure, discreet packaging to protect your privacy. The full package contents are listed below.
The Rolex Cosmograph Daytona 116500LN super clone ships within 24 hours of order confirmation via DHL Express or FedEx Priority with full insurance and discreet packaging. Worldwide delivery lands in 5 to 10 business days across the USA, UK, UAE, India, and Europe. Every watch carries a 1-year limited warranty covering movement defects, with replacement-parts support and servicing guidance provided after purchase. The support channels for the 116500LN Super Clone are listed below.
Real owners of the Rolex Cosmograph Daytona 116500LN super clone share the wrist-side verdict. Ratings average 4.9 / 5 across 168 verified orders.
"I wanted a Daytona that stood apart from the standard white dial, and the mother of pearl surface shifts color as I move my wrist. The black sub-dials frame it perfectly. The ceramic bezel feels solid and the pushers screw down just like the real one. At $1,499 it looks like the genuine piece."
"Shipped DHL and arrived in London in 5 days. The packaging was discreet exactly as described. The chronograph starts and stops with no stutter, and all three hands snap back to zero on reset. The weight feels close to the steel Daytona I tried at a boutique."
"I was nervous spending this much on my first clone. WhatsApp support answered every question about the movement and the bezel before I ordered. The watch arrived in a full box set with papers. The Cerachrom bezel and the Oysterlock clasp closed the deal for me."
Yes, the Rolex Daytona 116500LN sold on Super Clone Watches is a 1:1 super clone that reproduces the genuine Rolex reference at 98% visual and dimensional accuracy. The build matches the steel case, the white mother of pearl dial, the black Cerachrom bezel, and the Oyster bracelet geometry within tight tolerance. The price of $1,499 compares to a genuine market figure near $35,000.
A Swiss-grade automatic clone of Rolex Caliber 4130 powers this Daytona 116500LN super clone. The movement runs at 28,800 vibrations per hour, holds a 72-hour power reserve, and drives the chronograph through the 30-minute and 12-hour counters. Performance matches the genuine caliber on frequency and autonomy, with a clean chronograph start and a precise reset to zero.
The mother of pearl dial is a dial face cut from natural shell, prized for its shifting iridescence and individual surface. Each piece shows a slightly different shimmer because the shell grain varies. This super clone reproduces the white mother of pearl variant of the 116500LN-0001, paired with three contrasting black sub-dials for high-contrast chronograph reading.
The Cerachrom bezel is the hard ceramic bezel Rolex introduced on the steel Daytona with the 116500LN in 2016. The bezel resists scratches and holds its deep black color without fading under sunlight. This super clone uses a ceramic bezel insert with an engraved tachymetric scale that reads average speed over a measured distance.
Yes, the chronograph function works on this 116500LN super clone. The screw-down pushers at 2 and 4 o'clock unscrew to start, stop, and reset the chronograph, which times elapsed seconds on the central hand, minutes on the 3 o'clock counter, and hours on the 9 o'clock counter. The Caliber 4130 clone movement drives all three counters with a clean return to zero.
The authentic Rolex Cosmograph Daytona 116500LN carries a list price near $15,000 and trades on the secondary market near $35,000 due to high demand. This super clone sells for $1,499, which delivers 98% visual and functional parity at a small fraction of the secondary market price. Buyers receive the full steel Daytona wrist presence without the capital commitment or waitlist.
The Rolex Cosmograph Daytona 116500LN super clone ships via DHL Express or FedEx Priority with full insurance and tracked, signature-required delivery. The watch travels in secure, discreet packaging to protect your privacy. Transit time runs 5 to 10 business days to the USA, UK, UAE, India, and Europe, and the shipping cost is included in the price.
A 1-year limited warranty covers movement defects and manufacturing faults on this Daytona 116500LN super clone. Replacement parts sourcing runs through the originating factory via Super Clone Watches support. Movement servicing guidance is provided through WhatsApp and email for the lifetime of the watch.
