| Reference | 116515LN |
|---|---|
| Case | 40mm × 12.4mm, 18k Everose gold-tone |
| Dial | Black with Everose gold sub-dials |
The Cosmograph Daytona 116515LN is the 40mm Everose gold version of the Rolex Daytona, paired here with a black dial and the Oysterflex rubber strap. This super clone reproduces the 116515LN reference with three Everose gold sub-dials, a black Cerachrom ceramic bezel, and the Caliber 4130 chronograph layout for $1,599. Every proportion, sub-dial position, and strap cushion follows the genuine reference within tight production tolerance.
The Rolex Daytona 116515LN super clone carries a 40mm Oyster case measuring 12.4mm thick, built on a 904L stainless steel core with a high-grade Everose gold-tone finish for accurate color and long-term wear. Everose is the rose gold alloy Rolex introduced in 2005, blended to hold its warm pink hue without fading, and this clone reproduces that deep rose tone across the polished case flanks and satin-finished lugs.
The black Cerachrom ceramic bezel rings the dial with a molded tachymetric scale that converts elapsed time into average speed over a fixed distance. Cerachrom resists scratches and holds its color under sunlight, and this super clone reproduces the glossy black insert with engraved Everose gold-tone graduations. Two screw-down chronograph pushers flank the Twinlock crown at 3 o'clock, and each pusher unscrews to operate the chronograph and screws back to lock the case.
Scratch-resistant sapphire crystal with anti-reflective coating covers the black dial for clear reading at any angle. The solid screw-down caseback seals the Caliber 4130 clone movement and holds water resistance to 100 meters, supported by the Twinlock crown and the screw-down pusher system. The case profile keeps the slim chronograph silhouette buyers expect from a modern Daytona.
The black dial of this Daytona 116515LN super clone carries a deep, even black that frames the warm Everose gold case with strong contrast. The dial holds applied Everose gold-tone baton markers at every hour, polished and faceted to catch light against the dark surface. The three sub-dials sit in a contrasting Everose gold tone, a layout collectors call the reverse panda for its bright counters on a dark field.
The 116515LN dial carries three chronograph sub-dials in the standard Daytona layout. The small seconds counter sits at 6 o'clock, the 30-minute counter sits at 3 o'clock, and the 12-hour counter sits at 9 o'clock. The central chronograph seconds hand sweeps the full dial when the chronograph runs, while Everose gold-tone baton hands track the running time.
The applied Rolex coronet sits at 12 o'clock, with "Rolex Oyster Perpetual Superlative Chronometer Cosmograph Daytona" printed in crisp, fine text across the dial. The "Daytona" script arcs in red above the 6 o'clock counter, a signature detail of the model. The black dial and Everose gold sub-dials give the 116515LN a sharp, sporty balance against the warm rose case.
The Rolex Daytona 116515LN super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for a full weekend off the wrist.
The chronograph starts, stops, and resets through the two screw-down pushers, and the central seconds hand returns cleanly to zero on reset. Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The smooth sweeping seconds hand and the quiet rotor confirm the Swiss-grade build of this Daytona 116515LN super clone.
Spec grid:
The Daytona 116515LN super clone carries the Oysterflex strap, the high-performance rubber strap Rolex introduced in 2015. The Oysterflex is built over a flexible titanium-nickel metal blade and overmolded with black elastomer, which gives the strap the durability of a metal bracelet and the comfort of rubber. An Everose gold-tone Oysterlock safety clasp secures the strap and prevents accidental opening.
The Oysterflex interior carries longitudinal cushions that hold the strap slightly off the skin for airflow and a stable fit during wear. The watch weighs approximately 95 grams on the strap, lighter than a full gold bracelet while keeping the substantial case presence buyers expect from an Everose gold Daytona. The 40mm case and Oysterflex strap sit comfortably on wrists from 6.5 to 8 inches.
The Rolex Daytona 116515LN super clone carries a 40mm Oyster case measuring 12.4mm thick, built on a 904L stainless steel core with a high-grade Everose gold-tone finish for accurate color and long-term wear. Everose is the rose gold alloy Rolex introduced in 2005, blended to hold its warm pink hue without fading, and this clone reproduces that deep rose tone across the polished case flanks and satin-finished lugs.
The black Cerachrom ceramic bezel rings the dial with a molded tachymetric scale that converts elapsed time into average speed over a fixed distance. Cerachrom resists scratches and holds its color under sunlight, and this super clone reproduces the glossy black insert with engraved Everose gold-tone graduations. Two screw-down chronograph pushers flank the Twinlock crown at 3 o'clock, and each pusher unscrews to operate the chronograph and screws back to lock the case.
Scratch-resistant sapphire crystal with anti-reflective coating covers the black dial for clear reading at any angle. The solid screw-down caseback seals the Caliber 4130 clone movement and holds water resistance to 100 meters, supported by the Twinlock crown and the screw-down pusher system. The case profile keeps the slim chronograph silhouette buyers expect from a modern Daytona.
The black dial of this Daytona 116515LN super clone carries a deep, even black that frames the warm Everose gold case with strong contrast. The dial holds applied Everose gold-tone baton markers at every hour, polished and faceted to catch light against the dark surface. The three sub-dials sit in a contrasting Everose gold tone, a layout collectors call the reverse panda for its bright counters on a dark field.
The 116515LN dial carries three chronograph sub-dials in the standard Daytona layout. The small seconds counter sits at 6 o'clock, the 30-minute counter sits at 3 o'clock, and the 12-hour counter sits at 9 o'clock. The central chronograph seconds hand sweeps the full dial when the chronograph runs, while Everose gold-tone baton hands track the running time.
The applied Rolex coronet sits at 12 o'clock, with "Rolex Oyster Perpetual Superlative Chronometer Cosmograph Daytona" printed in crisp, fine text across the dial. The "Daytona" script arcs in red above the 6 o'clock counter, a signature detail of the model. The black dial and Everose gold sub-dials give the 116515LN a sharp, sporty balance against the warm rose case.
The Rolex Daytona 116515LN super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for a full weekend off the wrist.
The chronograph starts, stops, and resets through the two screw-down pushers, and the central seconds hand returns cleanly to zero on reset. Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The smooth sweeping seconds hand and the quiet rotor confirm the Swiss-grade build of this Daytona 116515LN super clone.
Spec grid:
The Daytona 116515LN super clone carries the Oysterflex strap, the high-performance rubber strap Rolex introduced in 2015. The Oysterflex is built over a flexible titanium-nickel metal blade and overmolded with black elastomer, which gives the strap the durability of a metal bracelet and the comfort of rubber. An Everose gold-tone Oysterlock safety clasp secures the strap and prevents accidental opening.
The Oysterflex interior carries longitudinal cushions that hold the strap slightly off the skin for airflow and a stable fit during wear. The watch weighs approximately 95 grams on the strap, lighter than a full gold bracelet while keeping the substantial case presence buyers expect from an Everose gold Daytona. The 40mm case and Oysterflex strap sit comfortably on wrists from 6.5 to 8 inches.
The Everose gold Daytona offers a strap-and-metal choice, and the 116515LN holds the Everose gold Oysterflex tier. The comparison of the three closest references is listed below.
| Variant | Case Metal | Strap or Bracelet | Super Clone Price |
|---|---|---|---|
| 116515LN (this reference) | Everose gold-tone | Oysterflex rubber | $1,599 |
| 116505 | Everose gold-tone | Oyster bracelet, Everose gold | $1,599 |
| 116508 | Yellow gold-tone | Oyster bracelet, yellow gold | $1,599 |
Buyers select the 116515LN for the sport-luxury contrast of an Everose gold case on a black rubber strap. The 116505 buyer prefers the full Everose gold Oyster bracelet for a heavier, more formal presence. The 116508 buyer chooses traditional yellow gold over rose. The 116515LN Super Clone with a black dial and Oysterflex strap gives the lightest wrist feel of the three.
The Rolex Cosmograph Daytona launched in 1963 as a chronograph built for motorsport timing, named for the Daytona International Speedway in Florida. Rolex placed a tachymetric scale on the bezel so drivers could read average speed from elapsed time. The Daytona moved to the in-house Caliber 4130 in 2000, a chronograph movement with a vertical clutch and a column wheel for clean start and stop action. Rolex introduced the Oysterflex strap in 2015 on the Everose gold Daytona, pairing the precious metal case with a high-performance rubber strap over a titanium-nickel blade. The 116515LN reference holds the Everose gold case, the black Cerachrom bezel, and the Oysterflex strap in that generation. The 116515LN Super Clone carries that combined heritage of the Cosmograph Daytona and the Oysterflex onto the wrist.
Every Rolex Daytona 116515LN super clone passes a four-stage quality control sequence before shipping. The QC steps are listed below.
The 116515LN Super Clone ships in secure, discreet packaging to protect your privacy. The full package contents are listed below.
The Rolex Daytona 116515LN super clone ships within 24 hours of order confirmation via DHL Express or FedEx Priority with full insurance and discreet packaging. Worldwide delivery lands in 5 to 10 business days across the USA, UK, UAE, India, and Europe. Every watch carries a 1-year limited warranty covering movement defects, with replacement-parts support and servicing guidance provided after purchase. The support channels for the 116515LN Super Clone are listed below.
Real owners of the Rolex Daytona 116515LN super clone share the wrist-side verdict. Ratings average 4.9 / 5 across 162 verified orders
"I have worn metal bracelet Daytonas before, and the Oysterflex on this 116515LN sits softer and lighter on the wrist. The rubber feels dense, not cheap. The Everose case against the black strap looks sporty and rich at the same time. At $1,599 it punches well above the price."
"Shipped DHL and arrived in Dubai in 6 days. The packaging was discreet exactly as described. The screw-down pushers thread smoothly and the chronograph hand snaps back to zero every time. The Cerachrom bezel has a deep gloss. The Everose sub-dials catch the light."
"I was nervous spending this much on my first clone. WhatsApp support answered every question about the Oysterflex strap before I ordered. The watch arrived in a full box set with papers. The reverse panda dial and the rose gold tone closed the deal for me."
Yes, the Rolex Daytona 116515LN sold on Super Clone Watches is a 1:1 super clone that reproduces the genuine Rolex reference at 98% visual and dimensional accuracy. The build matches the Everose gold tone, the black dial finish, the Cerachrom bezel, and the Oysterflex strap geometry within tight tolerance. The price of $1,599 compares to a genuine retail near $40,400 at authorized Rolex dealers.
The Oysterflex strap is the high-performance rubber strap Rolex introduced in 2015, built over a flexible titanium-nickel metal blade and overmolded with black elastomer. The strap gives the durability of a metal bracelet with the comfort and light weight of rubber. This super clone reproduces the Oysterflex with longitudinal interior cushions that hold the strap off the skin for airflow and a stable fit.
A Swiss-grade automatic clone of Rolex Caliber 4130 powers this Daytona 116515LN super clone. The movement runs at 28,800 vibrations per hour, holds a 72-hour power reserve, and drives the chronograph to 12 hours through the two screw-down pushers. Performance matches the genuine caliber on frequency and autonomy, with a smooth sweeping seconds hand and a quiet winding rotor.
The case uses a high-grade Everose gold-tone finish over a 904L stainless steel core rather than solid 18k Everose gold. This construction delivers the exact warm rose color, a substantial wrist weight, and durable scratch resistance for daily wear. Solid 18k Everose gold on the genuine Rolex 116515LN adds roughly $38,800 to the retail price without changing the wrist-side appearance.
Yes, the chronograph on this 116515LN super clone works through the two screw-down pushers at 3 o'clock. The top pusher starts and stops the central seconds hand, the bottom pusher resets it to zero, and the 30-minute and 12-hour counters track longer elapsed time. The Caliber 4130 clone movement drives all three sub-dials and the central chronograph hand.
The authentic Rolex Cosmograph Daytona 116515LN retails near $40,400 at authorized dealers and trades higher on the secondary market. This super clone sells for $1,599, which delivers 98% visual and functional parity at roughly 4% of the genuine retail price. Buyers receive the full Everose gold Daytona wrist presence without the capital commitment.
The Rolex Daytona 116515LN super clone ships via DHL Express or FedEx Priority with full insurance and tracked, signature-required delivery. The watch travels in secure, discreet packaging to protect your privacy. Transit time runs 5 to 10 business days to the USA, UK, UAE, India, and Europe, and the shipping cost is included in the price.
A 1-year limited warranty covers movement defects and manufacturing faults on this Daytona 116515LN super clone. Replacement parts sourcing runs through the originating factory via Super Clone Watches support. Movement servicing guidance is provided through WhatsApp and email for the lifetime of the watch.
