| Reference | 116519 |
|---|---|
| Case | 40mm × 12.4mm, 18k white gold-tone |
| Dial | Black with rainbow-colored hour markers |
The Daytona 116519 is the 40mm white gold version of the Rolex Cosmograph Daytona, presented here with a graduated simulated rainbow gemstone bezel and a black dial. This super clone reproduces the 116519 Rainbow reference with rainbow-colored hour markers, three chronograph sub-dials, and the Oyster bracelet for $1,699. Every proportion, stone position, and bracelet link follows the genuine reference within tight production tolerance.
The Rolex Daytona 116519 super clone carries a 40mm Oyster case measuring 12.4mm thick, built on a 904L stainless steel core with a high-grade white gold-tone finish for accurate color and long-term wear. The case shows the bright, cool sheen of white gold against the warm spectrum of the rainbow bezel for strong visual contrast.
The bezel of this Daytona 116519 Super Clone holds 36 graduated high-grade simulated stones set in sequence around the rim, running through red, orange, yellow, green, blue, and violet. The stones are simulated sapphire-style crystals, not mined gemstones, color-matched and graded for size so the spectrum flows evenly. A printed tachymetric scale underlies the stone setting and lets the wearer read average speed from elapsed chronograph time.
Scratch-resistant sapphire crystal with anti-reflective coating covers the black dial and resists daily knocks for years of clear reading. The screw-down chronograph pushers sit at 2 and 4 o'clock and lock the chronograph against accidental activation and water ingress. The screw-down Triplock crown and the solid screw-down caseback seal the movement and hold water resistance to 100 meters.
The black dial of this Daytona 116519 super clone carries a deep, even black that frames the rainbow bezel and the white gold case with high contrast. The dial holds applied hour markers cut from high-grade simulated rainbow-colored stones, each marker matched to the spectrum sequence of the bezel for a unified rainbow theme.
The black dial of the 116519 Super Clone carries three sub-dials in the genuine Cosmograph layout. The small seconds counter sits at 6 o'clock, the 30-minute chronograph counter sits at 3 o'clock, and the 12-hour chronograph counter sits at 9 o'clock. The sub-dial rings show a contrasting silver-tone finish that separates them cleanly from the black dial surface.
The applied Rolex coronet sits at 12 o'clock above "Rolex Cosmograph Daytona" printed in crisp, fine text. White gold-tone baton hands sweep the dial, and the central chronograph seconds hand runs the elapsed-time reading across the tachymetric scale. The minute track frames the dial edge with even spacing for the balanced look of the genuine Daytona.
The Rolex Daytona 116519 super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for three days off the wrist.
The chronograph starts, stops, and resets through the two screw-down pushers, and the vertical-clutch design gives a clean start with no stutter of the central seconds hand. Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The smooth sweeping seconds hand and the quiet rotor confirm the Swiss-grade build of the 116519 Super Clone.
Spec grid:
The Daytona 116519 super clone carries the Oyster bracelet, the three-piece-link design Rolex pairs with the Cosmograph Daytona. The bracelet uses a white gold-tone finish to match the case, with flat polished links and brushed outer links that taper from the lugs toward the wrist. The Daytona uses the Oyster bracelet rather than the President bracelet.
The watch weighs approximately 150 grams on the full bracelet, giving the substantial wrist presence buyers expect from a gold Daytona. The folding Oysterlock safety clasp closes with a firm click and locks against accidental opening. The 40mm case and tapered Oyster bracelet sit comfortably on wrists from 6.5 to 8 inches.
The Rolex Daytona 116519 super clone carries a 40mm Oyster case measuring 12.4mm thick, built on a 904L stainless steel core with a high-grade white gold-tone finish for accurate color and long-term wear. The case shows the bright, cool sheen of white gold against the warm spectrum of the rainbow bezel for strong visual contrast.
The bezel of this Daytona 116519 Super Clone holds 36 graduated high-grade simulated stones set in sequence around the rim, running through red, orange, yellow, green, blue, and violet. The stones are simulated sapphire-style crystals, not mined gemstones, color-matched and graded for size so the spectrum flows evenly. A printed tachymetric scale underlies the stone setting and lets the wearer read average speed from elapsed chronograph time.
Scratch-resistant sapphire crystal with anti-reflective coating covers the black dial and resists daily knocks for years of clear reading. The screw-down chronograph pushers sit at 2 and 4 o'clock and lock the chronograph against accidental activation and water ingress. The screw-down Triplock crown and the solid screw-down caseback seal the movement and hold water resistance to 100 meters.
The black dial of this Daytona 116519 super clone carries a deep, even black that frames the rainbow bezel and the white gold case with high contrast. The dial holds applied hour markers cut from high-grade simulated rainbow-colored stones, each marker matched to the spectrum sequence of the bezel for a unified rainbow theme.
The black dial of the 116519 Super Clone carries three sub-dials in the genuine Cosmograph layout. The small seconds counter sits at 6 o'clock, the 30-minute chronograph counter sits at 3 o'clock, and the 12-hour chronograph counter sits at 9 o'clock. The sub-dial rings show a contrasting silver-tone finish that separates them cleanly from the black dial surface.
The applied Rolex coronet sits at 12 o'clock above "Rolex Cosmograph Daytona" printed in crisp, fine text. White gold-tone baton hands sweep the dial, and the central chronograph seconds hand runs the elapsed-time reading across the tachymetric scale. The minute track frames the dial edge with even spacing for the balanced look of the genuine Daytona.
The Rolex Daytona 116519 super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for three days off the wrist.
The chronograph starts, stops, and resets through the two screw-down pushers, and the vertical-clutch design gives a clean start with no stutter of the central seconds hand. Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The smooth sweeping seconds hand and the quiet rotor confirm the Swiss-grade build of the 116519 Super Clone.
Spec grid:
The Daytona 116519 super clone carries the Oyster bracelet, the three-piece-link design Rolex pairs with the Cosmograph Daytona. The bracelet uses a white gold-tone finish to match the case, with flat polished links and brushed outer links that taper from the lugs toward the wrist. The Daytona uses the Oyster bracelet rather than the President bracelet.
The watch weighs approximately 150 grams on the full bracelet, giving the substantial wrist presence buyers expect from a gold Daytona. The folding Oysterlock safety clasp closes with a firm click and locks against accidental opening. The 40mm case and tapered Oyster bracelet sit comfortably on wrists from 6.5 to 8 inches.
The Cosmograph Daytona offers several routes at the super clone tier, and the 116519 Rainbow holds the gem-set white gold tier. The comparison of three popular variants is listed below.
| Variant | Case Metal | Bezel | Super Clone Price |
|---|---|---|---|
| 116519 Rainbow (this reference) | White gold-tone | Simulated rainbow stones, tachymetric | $1,699 |
| 116500LN | 904L steel | Black Cerachrom ceramic, tachymetric | $1,399 |
| 116508 | Yellow gold-tone | Engraved gold, tachymetric | $1,599 |
Buyers select the 116519 Rainbow for the bold spectrum bezel and the matching rainbow hour markers, the most distinctive Daytona in the lineup. Steel 116500LN buyers prefer the everyday durability of the black ceramic bezel. Yellow gold 116508 buyers choose the classic warm metal and engraved bezel. The 116519 Rainbow Super Clone with a black dial gives the strongest color statement of the three.
The Rolex Cosmograph Daytona launched in 1963 as a chronograph built for motorsport timing, named for the Daytona International Speedway in Florida. Rolex designed the model around a tachymetric bezel scale that converts elapsed time into average speed, paired with three sub-dials for the chronograph functions. The white gold reference 116519 arrived in the 2000s with Caliber 4130, the in-house chronograph movement Rolex introduced in 2000. Rolex released the gem-set Rainbow Daytona as a limited high-jewelry expression, fitting the bezel and dial markers with graduated colored sapphires across the spectrum. The 116519 Rainbow Super Clone carries that combined heritage of the Cosmograph chronograph and the Rainbow gem-set design onto the wrist.
Every Rolex Daytona 116519 super clone passes a four-stage quality control sequence before shipping. The QC steps are listed below.
The 116519 Super Clone ships in secure, discreet packaging to protect your privacy. The full package contents are listed below.
The Rolex Daytona 116519 super clone ships within 24 hours of order confirmation via DHL Express or FedEx Priority with full insurance and discreet packaging. Worldwide delivery lands in 5 to 10 business days across the USA, UK, UAE, India, and Europe. Every watch carries a 1-year limited warranty covering movement defects, with replacement-parts support and servicing guidance provided after purchase. The support channels for the 116519 Super Clone are listed below.
Real owners of the Rolex Daytona 116519 super clone share the wrist-side verdict. Ratings average 4.9 / 5 across 162 verified orders.
"I wanted the Rainbow Daytona and the stone sequence on this one flows perfectly from red through to violet. The colors are bright and the setting is tight with no gaps. The black dial makes every stone pop. At $1,699 it draws attention everywhere."
"Shipped FedEx and arrived in London in 6 days. The pushers screw down properly and the chronograph starts with no jump in the seconds hand. The white gold tone is cool and bright against the rainbow bezel. The weight feels close to a real gold Daytona."
"I was nervous spending this much on my first clone. WhatsApp support answered every question about the simulated stones before I ordered. The watch arrived in a full box set with papers. The rainbow markers matching the bezel closed the deal for me."
Yes, the Rolex Daytona 116519 sold on Super Clone Watches is a 1:1 super clone that reproduces the genuine Rolex reference at 98% visual and dimensional accuracy. The build matches the white gold tone, the rainbow bezel sequence, the black dial, and the Oyster bracelet geometry within tight tolerance. The price of $1,699 compares to a genuine retail near $400,000 at authorized Rolex dealers.
The stones on this Daytona 116519 Rainbow super clone are high-grade simulated sapphire-style crystals, not mined gemstones. The bezel holds 36 graduated simulated stones running through the full color spectrum, and the dial carries matching simulated rainbow-colored hour markers. The simulated stones are color-matched and size-graded so the rainbow flows evenly around the bezel.
A Swiss-grade automatic chronograph clone of Rolex Caliber 4130 powers this Daytona 116519 super clone. The movement runs at 28,800 vibrations per hour, holds a 72-hour power reserve, and drives the chronograph through a vertical-clutch design. Performance matches the genuine caliber on frequency and autonomy, with a smooth sweeping seconds hand and a quiet winding rotor.
The case uses a high-grade white gold-tone finish over a 904L stainless steel core rather than solid 18k white gold. This construction delivers the exact cool white sheen, a substantial wrist weight, and durable scratch resistance for daily wear. Solid 18k white gold with mined gemstones on the genuine Rolex 116519 adds a six-figure sum to the retail price without changing the wrist-side appearance.
Yes, the chronograph pushers and crown screw down on this 116519 super clone. The two screw-down pushers at 2 and 4 o'clock lock the chronograph against accidental activation, and the screw-down Triplock crown seals the case. This screw-down system supports the 100-meter water resistance of the Cosmograph Daytona.
The authentic Rolex Daytona 116519 Rainbow retails near $400,000 at authorized dealers and trades higher on the secondary market because of its gem-set white gold build. This super clone sells for $1,699, which delivers 98% visual and functional parity at a small fraction of the genuine retail price. Buyers receive the full white gold Rainbow Daytona wrist presence without the capital commitment.
The Rolex Daytona 116519 super clone ships via DHL Express or FedEx Priority with full insurance and tracked, signature-required delivery. The watch travels in secure, discreet packaging to protect your privacy. Transit time runs 5 to 10 business days to the USA, UK, UAE, India, and Europe, and the shipping cost is included in the price.
A 1-year limited warranty covers movement defects and manufacturing faults on this Daytona 116519 super clone. Replacement parts sourcing runs through the originating factory via Super Clone Watches support. Movement servicing guidance is provided through WhatsApp and email for the lifetime of the watch.
