| Reference | 116500LN (storefront SKU 2071401) |
|---|---|
| Case | 40mm × 12.4mm, 904L stainless steel |
| Dial | Color fish-pattern decorative dial, 3 sub-dials |
The Daytona 116500LN is the 40mm steel version of the Rolex Cosmograph Daytona, paired here with a decorative color fish-pattern dial and the black Cerachrom ceramic bezel. This super clone reproduces the 116500LN reference with three chronograph sub-dials, screw-down pushers, and the steel Oyster bracelet for $1,449. Every proportion, sub-dial position, and bracelet link follows the genuine reference within tight production tolerance. The color fish-pattern dial is a decorative variation that replaces the standard surface with a colorful scaled texture while keeping the Daytona layout intact.
The Rolex Daytona 116500LN super clone carries a 40mm Oyster case measuring 12.4mm thick, built on a 904L stainless steel core for corrosion resistance and a long-lasting premium feel. The case combines brushed surfaces on the lugs with polished bevels for the contrast finish the steel Daytona is known for. Screw-down chronograph pushers flank the screw-down Triplock crown at 3 o'clock, and this construction holds water resistance to 100 meters.
The black Cerachrom ceramic bezel rings the dial and carries an engraved tachymetric scale used to read average speed over a measured distance. Cerachrom is the ceramic Rolex uses for its scratch resistance and color stability, and this super clone reproduces the deep black tone with a recessed engraved scale. The fixed bezel sits flush against the case for the balanced profile of the modern steel Daytona.
Scratch-resistant sapphire crystal covers the color fish-pattern dial and carries an anti-reflective coating for clear reading at any angle. The crystal resists daily knocks for years of reliable use. The solid screw-down caseback seals the Caliber 4130 clone movement and works with the Triplock crown to hold the 100-meter water resistance rating.
The color fish-pattern dial of this Daytona 116500LN super clone replaces the standard flat surface with a colorful scaled texture that resembles fish skin and shifts tone as light moves across it. The dial keeps the full Daytona layout, with three recessed chronograph sub-dials set against the patterned background. Applied hour markers with luminous fill ring the dial for legibility in low light.
The Daytona dial carries three sub-dials in the genuine 116500LN positions. The small seconds counter sits at 6 o'clock, the 30-minute counter sits at 3 o'clock, and the 12-hour counter sits at 9 o'clock. The central chronograph seconds hand sweeps the full dial when the chronograph runs, and luminous baton hands display the running hours and minutes. The contrast between the color fish-pattern background and the recessed counters keeps every reading clear.
The applied Rolex coronet sits at 12 o'clock, with "Rolex Oyster Perpetual Superlative Chronometer" and "Cosmograph Daytona" printed in fine, crisp text. The minute track and tachymetric reference frame the dial edge with even spacing. The three-counter layout gives the Daytona its balanced, instantly recognizable face, and the color fish-pattern finish adds a distinct decorative identity to this build.
The Rolex Daytona 116500LN super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for three full days off the wrist. The chronograph engages through the screw-down pushers once they are unscrewed.
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The central chronograph seconds hand starts, stops, and resets cleanly through the pushers, and the 30-minute and 12-hour counters track elapsed time accurately. The smooth sweeping running seconds and the quiet rotor confirm the Swiss-grade build of this Daytona 116500LN super clone.
Spec grid:
The Daytona 116500LN super clone carries the steel Oyster bracelet, the three-piece flat-link design Rolex uses on its sport models. The bracelet is built in 904L stainless steel to match the case, with brushed outer links and polished center links that taper from the lugs toward the wrist. The Daytona uses the Oyster bracelet rather than a President bracelet.
The watch weighs approximately 145 grams on the full bracelet, giving the solid wrist presence buyers expect from a steel Daytona. The folding Oysterlock safety clasp closes with a firm click and includes a safety catch that prevents accidental opening. The 40mm case and tapered Oyster bracelet sit comfortably on wrists from 6.5 to 8 inches.
The Rolex Daytona 116500LN super clone carries a 40mm Oyster case measuring 12.4mm thick, built on a 904L stainless steel core for corrosion resistance and a long-lasting premium feel. The case combines brushed surfaces on the lugs with polished bevels for the contrast finish the steel Daytona is known for. Screw-down chronograph pushers flank the screw-down Triplock crown at 3 o'clock, and this construction holds water resistance to 100 meters.
The black Cerachrom ceramic bezel rings the dial and carries an engraved tachymetric scale used to read average speed over a measured distance. Cerachrom is the ceramic Rolex uses for its scratch resistance and color stability, and this super clone reproduces the deep black tone with a recessed engraved scale. The fixed bezel sits flush against the case for the balanced profile of the modern steel Daytona.
Scratch-resistant sapphire crystal covers the color fish-pattern dial and carries an anti-reflective coating for clear reading at any angle. The crystal resists daily knocks for years of reliable use. The solid screw-down caseback seals the Caliber 4130 clone movement and works with the Triplock crown to hold the 100-meter water resistance rating.
The color fish-pattern dial of this Daytona 116500LN super clone replaces the standard flat surface with a colorful scaled texture that resembles fish skin and shifts tone as light moves across it. The dial keeps the full Daytona layout, with three recessed chronograph sub-dials set against the patterned background. Applied hour markers with luminous fill ring the dial for legibility in low light.
The Daytona dial carries three sub-dials in the genuine 116500LN positions. The small seconds counter sits at 6 o'clock, the 30-minute counter sits at 3 o'clock, and the 12-hour counter sits at 9 o'clock. The central chronograph seconds hand sweeps the full dial when the chronograph runs, and luminous baton hands display the running hours and minutes. The contrast between the color fish-pattern background and the recessed counters keeps every reading clear.
The applied Rolex coronet sits at 12 o'clock, with "Rolex Oyster Perpetual Superlative Chronometer" and "Cosmograph Daytona" printed in fine, crisp text. The minute track and tachymetric reference frame the dial edge with even spacing. The three-counter layout gives the Daytona its balanced, instantly recognizable face, and the color fish-pattern finish adds a distinct decorative identity to this build.
The Rolex Daytona 116500LN super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for three full days off the wrist. The chronograph engages through the screw-down pushers once they are unscrewed.
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The central chronograph seconds hand starts, stops, and resets cleanly through the pushers, and the 30-minute and 12-hour counters track elapsed time accurately. The smooth sweeping running seconds and the quiet rotor confirm the Swiss-grade build of this Daytona 116500LN super clone.
Spec grid:
The Daytona 116500LN super clone carries the steel Oyster bracelet, the three-piece flat-link design Rolex uses on its sport models. The bracelet is built in 904L stainless steel to match the case, with brushed outer links and polished center links that taper from the lugs toward the wrist. The Daytona uses the Oyster bracelet rather than a President bracelet.
The watch weighs approximately 145 grams on the full bracelet, giving the solid wrist presence buyers expect from a steel Daytona. The folding Oysterlock safety clasp closes with a firm click and includes a safety catch that prevents accidental opening. The 40mm case and tapered Oyster bracelet sit comfortably on wrists from 6.5 to 8 inches.
The steel Cosmograph Daytona offers three main generations, and the 116500LN holds the ceramic-bezel tier with Caliber 4130. The comparison of the three steel references is listed below.
| Variant | Generation | Bezel | Caliber | Super Clone Price |
|---|---|---|---|---|
| 116500LN (this reference) | 2016 ceramic | Black Cerachrom ceramic | Caliber 4130 | $1,449 |
| 126500LN | 2023 ceramic | Black Cerachrom ceramic | Caliber 4131 | $1,499 |
| 116520 | 2000 steel | Steel engraved | Caliber 4130 | $1,299 |
Buyers select the 116500LN for the black ceramic bezel and the proven Caliber 4130, the configuration that defined the modern steel Daytona from 2016. The 126500LN buyers prefer the latest generation with Caliber 4131 and a slightly wider bezel. The 116520 buyers choose the classic steel engraved bezel of the earlier generation. This Daytona 116500LN super clone adds the decorative color fish-pattern dial as a distinct variation on the standard build.
The Rolex Cosmograph Daytona launched in 1963 as a chronograph built for motorsport, named for the Daytona International Speedway in Florida. Rolex designed the model with a tachymetric bezel so drivers could read average speed directly from the dial. Early references used manual-wind movements, and the model gained lasting status after the actor Paul Newman wore an exotic-dial Daytona through the 1970s. Rolex moved the Daytona to an automatic in-house movement in 2000 with Caliber 4130, which reduced the part count and improved reliability. The reference 116500LN arrived in 2016 with a black Cerachrom ceramic bezel, the first steel Daytona to carry a ceramic insert. The Daytona 116500LN Super Clone carries that motorsport heritage onto the wrist with the decorative color fish-pattern dial.
Every Rolex Daytona 116500LN super clone passes a four-stage quality control sequence before shipping. The QC steps are listed below.
The Daytona 116500LN Super Clone ships in secure, discreet packaging to protect your privacy. The full package contents are listed below.
The Rolex Daytona 116500LN super clone ships within 24 hours of order confirmation via DHL Express or FedEx Priority with full insurance and discreet packaging. Worldwide delivery lands in 5 to 10 business days across the USA, UK, UAE, India, and Europe. Every watch carries a 1-year limited warranty covering movement defects, with replacement-parts support and servicing guidance provided after purchase. The support channels for the Daytona 116500LN Super Clone are listed below.
Real owners of the Rolex Daytona 116500LN super clone share the wrist-side verdict. Ratings average 4.9 / 5 across 162 verified orders.
"I ordered the color fish-pattern Daytona because it stands out from the standard dials. The scaled texture shifts color in the light and looks far better than the photos. The sub-dials are crisp and sit exactly where they should. At $1,449 it feels like a genuine steel Daytona on the wrist."
"Shipped DHL and arrived in London in 6 days. The packaging was discreet exactly as described. The screw-down pushers unscrew smoothly and the chronograph starts, stops, and resets with no lag. The ceramic bezel has a deep black tone."
"I was nervous spending this much on my first clone. WhatsApp support answered every question about the fish-pattern dial before I ordered. The watch arrived in a full box set with papers. The weight and the Oysterlock clasp closed the deal for me."
Yes, the Rolex Daytona 116500LN sold on Super Clone Watches is a 1:1 super clone that reproduces the genuine Rolex reference at 98% visual and dimensional accuracy. The build matches the steel case finishing, the black Cerachrom ceramic bezel, and the three-counter Daytona layout within tight tolerance. The price of $1,449 compares to a genuine retail near $15,100 at authorized Rolex dealers.
The color fish-pattern dial is a decorative dial finish that replaces the standard flat surface with a colorful scaled texture resembling fish skin. The pattern shifts tone as light moves across the dial, which gives this Daytona 116500LN super clone a distinct look while keeping the genuine three-sub-dial Daytona layout intact. Applied luminous markers and recessed chronograph counters sit against the patterned background for clear legibility.
A Swiss-grade automatic chronograph clone of Rolex Caliber 4130 powers this Daytona 116500LN super clone. The movement runs at 28,800 vibrations per hour, holds a 72-hour power reserve, and drives the central chronograph seconds hand with the 30-minute and 12-hour counters. Performance matches the genuine caliber on frequency and autonomy, with a smooth sweeping running seconds and a quiet winding rotor.
No, the reference number 2071401 does not belong to the official Rolex catalog. Super Clone Watches treats 2071401 as an internal storefront SKU, and this page is built on the standard steel Cosmograph Daytona reference 116500LN. The 116500LN is the correct Rolex reference for the 40mm steel Daytona with a black Cerachrom ceramic bezel and Caliber 4130.
Yes, the chronograph on this Daytona 116500LN super clone works as a functional timing complication. The screw-down pushers unscrew to engage the chronograph, and the central seconds hand starts, stops, and resets through the pushers while the 30-minute and 12-hour counters track elapsed time. The Caliber 4130 clone movement drives all three chronograph functions.
The authentic Rolex Daytona 116500LN retails near $15,100 at authorized dealers and trades far higher on the secondary market due to long waiting lists. This super clone sells for $1,449, which delivers 98% visual and functional parity at roughly 10% of the genuine retail price. Buyers receive the full steel Daytona wrist presence and chronograph function without the capital commitment or the dealer waitlist.
The Rolex Daytona 116500LN super clone ships via DHL Express or FedEx Priority with full insurance and tracked, signature-required delivery. The watch travels in secure, discreet packaging to protect your privacy. Transit time runs 5 to 10 business days to the USA, UK, UAE, India, and Europe, and the shipping cost is included in the price.
A 1-year limited warranty covers movement defects and manufacturing faults on this Daytona 116500LN super clone. Replacement parts sourcing runs through the originating factory via Super Clone Watches support. Movement servicing guidance is provided through WhatsApp and email for the lifetime of the watch.
