| Reference | 116508 |
|---|---|
| Case | 40mm × 12.5mm, 18k yellow gold-tone |
| Dial | Champagne with three black sub-dials |
The Cosmograph Daytona 116508 is the 40mm 18k yellow gold version of the Rolex Daytona, paired here with a champagne dial and a yellow gold tachymeter bezel. This super clone reproduces the 116508 reference with three chronograph counters, screw-down pushers, and a yellow gold Oyster bracelet for $1,499. Every proportion, sub-dial diameter, and tachymeter marking follows the genuine reference within tight production tolerance.
The Rolex Cosmograph Daytona 116508 super clone carries a 40mm Oyster case measuring 12.5mm thick, built on a 904L stainless steel core with a high-grade 18k yellow gold-tone finish for accurate color and long-term wear. Two screw-down chronograph pushers flank the screw-down Triplock crown at 3 o'clock, and each pusher locks down to hold the watch sealed during use.
The fixed bezel carries an engraved tachymeter scale, and the chronograph uses that scale to convert an elapsed interval into a speed reading over a known distance. The bezel finish on this super clone shows a polished yellow gold-tone surface with sharp, legible numerals around the rim. Mirror-polished surfaces wrap the lugs and case flanks for the bright look gold is known for.
Scratch-resistant sapphire crystal with anti-reflective coating covers the champagne dial and resists daily knocks for years of clear reading. The solid screw-down caseback seals the Caliber 4130 clone movement and holds water resistance to 100 meters, supported by the Triplock crown system and the screw-down pushers. The closed caseback keeps the chronograph protected during everyday wear.
The champagne dial of this Daytona 116508 super clone carries a warm golden tone that matches the yellow gold case and bezel for a unified gold finish. The dial holds three recessed black sub-dials, a color pairing collectors call the "panda" inverse, which gives the counters strong contrast against the champagne field.
The three sub-dials handle the chronograph display, with the small running seconds at 6 o'clock, the 30-minute counter at 3 o'clock, and the 12-hour counter at 9 o'clock. The central chronograph seconds hand sweeps the full dial when the chronograph runs and returns to zero on reset. Applied gold-tone hour markers with luminous fill ring the dial for legibility in low light.
The applied Rolex coronet sits at 12 o'clock, with "Rolex Oyster Perpetual Superlative Chronometer Cosmograph Daytona" printed in fine, crisp text across the champagne dial. The outer minute track frames the dial edge for precise chronograph reading. The champagne field and three black counters give the 116508 the balanced, sport-luxury look the gold Daytona is known for.
The Rolex Cosmograph Daytona 116508 super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for a full weekend off the wrist.
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The central chronograph seconds hand starts, stops, and resets cleanly through the screw-down pushers, and the 30-minute and 12-hour counters track longer intervals. The smooth sweeping seconds hand and the quiet rotor confirm the Swiss-grade build.
Spec grid:
The Daytona 116508 super clone carries the yellow gold Oyster bracelet, the flat three-piece-link design Rolex uses across its sport models. The bracelet uses a yellow gold-tone finish to match the case and the tachymeter bezel, with polished center links that taper smoothly from the lugs toward the wrist. The Daytona uses the Oyster bracelet rather than the President bracelet found on the Day-Date.
The watch weighs approximately 150 grams on the full bracelet, giving the substantial wrist presence buyers expect from a solid-look gold chronograph. The folding Oysterlock safety clasp closes flush and includes a small Easylink extension for fine length adjustment. The 40mm case and tapered bracelet sit comfortably on wrists from 6.5 to 8 inches.
The Rolex Cosmograph Daytona 116508 super clone carries a 40mm Oyster case measuring 12.5mm thick, built on a 904L stainless steel core with a high-grade 18k yellow gold-tone finish for accurate color and long-term wear. Two screw-down chronograph pushers flank the screw-down Triplock crown at 3 o'clock, and each pusher locks down to hold the watch sealed during use.
The fixed bezel carries an engraved tachymeter scale, and the chronograph uses that scale to convert an elapsed interval into a speed reading over a known distance. The bezel finish on this super clone shows a polished yellow gold-tone surface with sharp, legible numerals around the rim. Mirror-polished surfaces wrap the lugs and case flanks for the bright look gold is known for.
Scratch-resistant sapphire crystal with anti-reflective coating covers the champagne dial and resists daily knocks for years of clear reading. The solid screw-down caseback seals the Caliber 4130 clone movement and holds water resistance to 100 meters, supported by the Triplock crown system and the screw-down pushers. The closed caseback keeps the chronograph protected during everyday wear.
The champagne dial of this Daytona 116508 super clone carries a warm golden tone that matches the yellow gold case and bezel for a unified gold finish. The dial holds three recessed black sub-dials, a color pairing collectors call the "panda" inverse, which gives the counters strong contrast against the champagne field.
The three sub-dials handle the chronograph display, with the small running seconds at 6 o'clock, the 30-minute counter at 3 o'clock, and the 12-hour counter at 9 o'clock. The central chronograph seconds hand sweeps the full dial when the chronograph runs and returns to zero on reset. Applied gold-tone hour markers with luminous fill ring the dial for legibility in low light.
The applied Rolex coronet sits at 12 o'clock, with "Rolex Oyster Perpetual Superlative Chronometer Cosmograph Daytona" printed in fine, crisp text across the champagne dial. The outer minute track frames the dial edge for precise chronograph reading. The champagne field and three black counters give the 116508 the balanced, sport-luxury look the gold Daytona is known for.
The Rolex Cosmograph Daytona 116508 super clone runs on a Swiss-grade automatic chronograph movement engineered to reproduce the genuine Rolex Caliber 4130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 72-hour power reserve for a full weekend off the wrist.
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 4130. The central chronograph seconds hand starts, stops, and resets cleanly through the screw-down pushers, and the 30-minute and 12-hour counters track longer intervals. The smooth sweeping seconds hand and the quiet rotor confirm the Swiss-grade build.
Spec grid:
The Daytona 116508 super clone carries the yellow gold Oyster bracelet, the flat three-piece-link design Rolex uses across its sport models. The bracelet uses a yellow gold-tone finish to match the case and the tachymeter bezel, with polished center links that taper smoothly from the lugs toward the wrist. The Daytona uses the Oyster bracelet rather than the President bracelet found on the Day-Date.
The watch weighs approximately 150 grams on the full bracelet, giving the substantial wrist presence buyers expect from a solid-look gold chronograph. The folding Oysterlock safety clasp closes flush and includes a small Easylink extension for fine length adjustment. The 40mm case and tapered bracelet sit comfortably on wrists from 6.5 to 8 inches.
The Cosmograph Daytona offers three main metal routes, and the 116508 holds the yellow gold tier. The comparison of the three metal variants is listed below.
| Variant | Case Metal | Bezel | Super Clone Price |
|---|---|---|---|
| 116508 (this reference) | Yellow gold-tone | Gold tachymeter scale | $1,499 |
| 116500LN | 904L steel | Black Cerachrom ceramic | $1,399 |
| 116505 | Everose gold-tone | Rose gold tachymeter scale | $1,499 |
Buyers select the 116508 for the warm, classic statement of a full yellow gold chronograph. Steel buyers prefer the 116500LN for a sportier daily-wear profile and the black ceramic bezel. Everose buyers choose the 116505 for a softer, more modern rose tone. The 116508 Super Clone with a champagne dial gives the most cohesive gold-on-gold finish of the three.
The Rolex Cosmograph Daytona launched in 1963 as a chronograph built for motorsport timing, and Rolex named it after the Daytona International Speedway in Florida. The tachymeter bezel lets a driver read average speed from an elapsed lap time, which made the model a tool watch for racing. Early Daytona references used manual-wind movements such as Caliber 727, and Rolex moved to the self-winding Caliber 4030 in 1988. Rolex introduced the in-house Caliber 4130 in 2000, a chronograph movement with a vertical clutch and a column wheel, and the 116508 reference holds the 18k yellow gold case with that caliber. The Daytona 116508 Super Clone carries that combined heritage of motorsport timing and full yellow gold construction onto the wrist.
Every Rolex Cosmograph Daytona 116508 super clone passes a four-stage quality control sequence before shipping. The QC steps are listed below.
The Daytona 116508 Super Clone ships in secure, discreet packaging to protect your privacy. The full package contents are listed below.
The Rolex Cosmograph Daytona 116508 super clone ships within 24 hours of order confirmation via DHL Express or FedEx Priority with full insurance and discreet packaging. Worldwide delivery lands in 5 to 10 business days across the USA, UK, UAE, India, and Europe. Every watch carries a 1-year limited warranty covering movement defects, with replacement-parts support and servicing guidance provided after purchase. The support channels for the Daytona 116508 Super Clone are listed below.
Real owners of the Rolex Cosmograph Daytona 116508 super clone share the wrist-side verdict. Ratings average 4.9 / 5 across 162 verified orders.
"I wanted the full yellow gold Daytona, and the champagne dial against the gold case is exactly the look I hoped for. The three black sub-dials stand out cleanly. The chronograph pushers screw down tight. At $1,499 it wears like the real thing."
"Shipped FedEx and arrived in London in 7 days. The packaging was discreet exactly as described. The chronograph starts, stops, and resets sharp every time, and the 12-hour counter tracks correctly. The gold bracelet has real weight to it."
"I was nervous spending this much on my first clone. WhatsApp support walked me through the Caliber 4130 details before I ordered. The watch arrived in a full box set with papers. The tachymeter bezel and screw-down pushers sealed the deal for me."
Yes, the Rolex Cosmograph Daytona 116508 sold on Super Clone Watches is a 1:1 super clone that reproduces the genuine Rolex reference at 98% visual and dimensional accuracy. The build matches the yellow gold tone, the champagne dial finish, and the three-sub-dial chronograph layout within tight tolerance. The price of $1,499 compares to a genuine retail near $44,000 at authorized Rolex dealers.
The chronograph on this Daytona 116508 super clone times elapsed intervals using a central seconds hand and two counters. The 30-minute counter sits at 3 o'clock and the 12-hour counter sits at 9 o'clock, while the sub-dial at 6 o'clock runs the constant small seconds. The tachymeter bezel converts a timed interval into a speed reading over a known distance.
A Swiss-grade automatic clone of Rolex Caliber 4130 powers this Daytona 116508 super clone. The movement runs at 28,800 vibrations per hour, holds a 72-hour power reserve, and drives the chronograph start, stop, and reset functions. Performance matches the genuine caliber on frequency and autonomy, with a smooth sweeping seconds hand and a quiet winding rotor.
The case uses a high-grade 18k yellow gold-tone finish over a 904L stainless steel core rather than solid yellow gold. This construction delivers the exact warm gold color, a substantial wrist weight, and durable scratch resistance for daily wear. Solid 18k yellow gold on the genuine Rolex 116508 adds roughly $42,000 to the retail price without changing the wrist-side appearance.
This Daytona 116508 super clone uses a champagne dial with three recessed black sub-dials. The warm champagne tone matches the yellow gold case and bezel for a unified gold finish, and the black counters give strong contrast for clear chronograph reading. The champagne and black pairing is a genuine catalog variant of the yellow gold 116508.
The authentic Rolex Cosmograph Daytona 116508 retails near $44,000 at authorized dealers and trades higher on the secondary market. This super clone sells for $1,499, which delivers 98% visual and functional parity at roughly 3% of the genuine retail price. Buyers receive the full yellow gold Daytona wrist presence without the capital commitment.
The Rolex Cosmograph Daytona 116508 super clone ships via DHL Express or FedEx Priority with full insurance and tracked, signature-required delivery. The watch travels in secure, discreet packaging to protect your privacy. Transit time runs 5 to 10 business days to the USA, UK, UAE, India, and Europe, and the shipping cost is included in the price.
A 1-year limited warranty covers movement defects and manufacturing faults on this Daytona 116508 super clone. Replacement parts sourcing runs through the originating factory via Super Clone Watches support. Movement servicing guidance is provided through WhatsApp and email for the lifetime of the watch.
