| Reference | 114200 |
|---|---|
| Case | 34mm × 11.6mm, stainless steel |
| Dial | Custom open-worked skeleton |
The Oyster Perpetual 114200 is the 34mm time-only Rolex steel watch produced from about 2007 to 2020, built here with one custom change to the standard reference. This super clone follows the 114200 case, bezel, and Oyster bracelet specification while replacing the closed dial with a custom open-worked skeleton dial that shows the Caliber 3130 clone movement underneath. The skeleton dial is a custom feature and not a Rolex factory option, and it gives the 34mm steel case a mechanical, see-through face for $1,249. Every case proportion, the smooth bezel, and each bracelet link follow the genuine 114200 within tight production tolerance.
The Rolex Oyster Perpetual 114200 super clone carries a 34mm Oyster case measuring 11.6mm thick, built on a stainless steel core for accurate weight and corrosion resistance. The case alternates mirror-polished and satin-brushed surfaces along the lugs and flanks, matching the finishing pattern of the genuine steel 114200. The screw-down Twinlock crown at 3 o'clock seals the case for water resistance to 100 meters, and the smooth polished bezel keeps the clean, classic profile that defines the Oyster Perpetual line.
The smooth bezel of this 114200 super clone carries a fully polished stainless steel surface with no graduations or markings. The bezel keeps the dress-leaning, understated look that separates the Oyster Perpetual from the engraved and rotating bezels of the Rolex sport models. This super clone follows the genuine 114200 bezel profile in width and curvature, holding a tight seam against the polished case middle.
Scratch-resistant sapphire crystal with anti-reflective coating covers the open-worked skeleton dial and gives a clear, distortion-free view of the moving caliber below. The flat crystal sits flush against the polished bezel and resists daily knocks and scratches. The solid screw-down caseback seals the Caliber 3130 clone movement and supports the 100-meter water resistance rating of the 114200.
The skeleton dial of this Oyster Perpetual 114200 super clone is a custom open-worked feature that exposes the movement underneath through cut-away openings. Rolex does not make a factory skeleton Oyster Perpetual, so this dial is a custom build offered by Super Clone Watches and not a standard reference option. The open-worked surface shows the gear train, the balance wheel in motion, and the winding rotor, which gives the 34mm steel case a mechanical, see-through face.
The Oyster Perpetual 114200 super clone carries slim baton hands and applied hour markers set against the open-worked skeleton dial for a clear time reading. The markers and hands carry a luminous fill that glows in low light, holding legibility against the busy movement backdrop. The central hour, minute, and seconds hands follow the genuine 114200 in shape and proportion, and the seconds hand sweeps smoothly across the exposed caliber.
The applied Rolex coronet sits at 12 o'clock above the open-worked center, with the model text printed in fine lettering on the outer dial ring. The 114200 carries no date and no extra complications, which keeps the skeleton layout balanced and symmetrical. The exposed caliber, the polished steel case, and the smooth bezel give the 114200 super clone a clean, mechanical face that reads as both dress watch and movement showcase.
The Rolex Oyster Perpetual 114200 super clone runs on a Swiss-grade automatic movement engineered to match the genuine Rolex Caliber 3130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a power reserve of approximately 48 hours for two days off the wrist. The caliber drives the central hours, minutes, and seconds, and the open-worked skeleton dial keeps its moving parts in full view.
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 3130. The smooth sweeping seconds hand and the quiet rotor confirm the Swiss-grade build, and both stay fully visible through the skeleton dial. The 100-meter water resistance and the screw-down Twinlock crown let the 114200 super clone hold its seal through daily wear, hand washing, and light swimming.
Spec grid:
The Oyster Perpetual 114200 super clone carries the Oyster bracelet, the three-piece-link design Rolex uses across the Oyster Perpetual line. The bracelet uses a polished and brushed stainless steel finish, tapering smoothly from the lugs toward the wrist for a balanced fit on the 34mm case. A folding Oysterclasp closes flush against the wrist and holds the bracelet secure. The Oyster Perpetual uses the Oyster bracelet and never a President bracelet.
The watch weighs approximately 120 grams on the full Oyster bracelet, giving a light, comfortable wrist presence that suits the compact 34mm case. The 114200 super clone sits well on smaller and mid-size wrists from 6 to 7.5 inches and wears as a versatile unisex watch. The slim 11.6mm case profile slides easily under a shirt cuff, which keeps the skeleton-dial 114200 suited to both dress and daily wear.
The Rolex Oyster Perpetual 114200 super clone carries a 34mm Oyster case measuring 11.6mm thick, built on a stainless steel core for accurate weight and corrosion resistance. The case alternates mirror-polished and satin-brushed surfaces along the lugs and flanks, matching the finishing pattern of the genuine steel 114200. The screw-down Twinlock crown at 3 o'clock seals the case for water resistance to 100 meters, and the smooth polished bezel keeps the clean, classic profile that defines the Oyster Perpetual line.
The smooth bezel of this 114200 super clone carries a fully polished stainless steel surface with no graduations or markings. The bezel keeps the dress-leaning, understated look that separates the Oyster Perpetual from the engraved and rotating bezels of the Rolex sport models. This super clone follows the genuine 114200 bezel profile in width and curvature, holding a tight seam against the polished case middle.
Scratch-resistant sapphire crystal with anti-reflective coating covers the open-worked skeleton dial and gives a clear, distortion-free view of the moving caliber below. The flat crystal sits flush against the polished bezel and resists daily knocks and scratches. The solid screw-down caseback seals the Caliber 3130 clone movement and supports the 100-meter water resistance rating of the 114200.
The skeleton dial of this Oyster Perpetual 114200 super clone is a custom open-worked feature that exposes the movement underneath through cut-away openings. Rolex does not make a factory skeleton Oyster Perpetual, so this dial is a custom build offered by Super Clone Watches and not a standard reference option. The open-worked surface shows the gear train, the balance wheel in motion, and the winding rotor, which gives the 34mm steel case a mechanical, see-through face.
The Oyster Perpetual 114200 super clone carries slim baton hands and applied hour markers set against the open-worked skeleton dial for a clear time reading. The markers and hands carry a luminous fill that glows in low light, holding legibility against the busy movement backdrop. The central hour, minute, and seconds hands follow the genuine 114200 in shape and proportion, and the seconds hand sweeps smoothly across the exposed caliber.
The applied Rolex coronet sits at 12 o'clock above the open-worked center, with the model text printed in fine lettering on the outer dial ring. The 114200 carries no date and no extra complications, which keeps the skeleton layout balanced and symmetrical. The exposed caliber, the polished steel case, and the smooth bezel give the 114200 super clone a clean, mechanical face that reads as both dress watch and movement showcase.
The Rolex Oyster Perpetual 114200 super clone runs on a Swiss-grade automatic movement engineered to match the genuine Rolex Caliber 3130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a power reserve of approximately 48 hours for two days off the wrist. The caliber drives the central hours, minutes, and seconds, and the open-worked skeleton dial keeps its moving parts in full view.
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 3130. The smooth sweeping seconds hand and the quiet rotor confirm the Swiss-grade build, and both stay fully visible through the skeleton dial. The 100-meter water resistance and the screw-down Twinlock crown let the 114200 super clone hold its seal through daily wear, hand washing, and light swimming.
Spec grid:
The Oyster Perpetual 114200 super clone carries the Oyster bracelet, the three-piece-link design Rolex uses across the Oyster Perpetual line. The bracelet uses a polished and brushed stainless steel finish, tapering smoothly from the lugs toward the wrist for a balanced fit on the 34mm case. A folding Oysterclasp closes flush against the wrist and holds the bracelet secure. The Oyster Perpetual uses the Oyster bracelet and never a President bracelet.
The watch weighs approximately 120 grams on the full Oyster bracelet, giving a light, comfortable wrist presence that suits the compact 34mm case. The 114200 super clone sits well on smaller and mid-size wrists from 6 to 7.5 inches and wears as a versatile unisex watch. The slim 11.6mm case profile slides easily under a shirt cuff, which keeps the skeleton-dial 114200 suited to both dress and daily wear.
The Rolex time-only steel line offers several no-date references across case size and dial style, and the 114200 holds the 34mm Oyster Perpetual with a custom skeleton dial here. The comparison of three time-only steel references is listed below.
| Variant | Case Size | Dial | Super Clone Price |
|---|---|---|---|
| Oyster Perpetual 114200 (this reference) | 34mm | Custom open-worked skeleton | $1,249 |
| Oyster Perpetual 124300 | 41mm | Closed lacquer, baton markers | $1,299 |
| Air-King 14000 | 34mm | Closed black, 3-6-9 numerals | $1,249 |
Buyers select the Oyster Perpetual 114200 for the compact 34mm case and the custom skeleton dial that shows the moving caliber. Buyers who want a larger modern profile prefer the 41mm 124300 with its bright closed dial. The Air-King 14000 buyer chooses the same 34mm size with a closed black dial and printed numerals. The Oyster Perpetual 114200 Super Clone gives the small-case classic option with an open-worked dial that the standard references do not carry.
The Rolex Oyster Perpetual is the foundation model of the Rolex collection and traces to two core inventions. Rolex introduced the waterproof Oyster case in 1926, then added the self-winding Perpetual rotor in 1931, and the combined name has marked the model line since. The Oyster Perpetual is a time-only automatic watch with no date and no extra complications, which keeps the dial clean and the design purely about timekeeping. Rolex produced reference 114200 from about 2007 to 2020 as the 34mm version of the model, fitted with a smooth bezel, the Oyster bracelet, and Caliber 3130. The reference offered a range of factory dial colors during its run. Rolex replaced the 114200 in 2020 with the 41mm reference 124300 and a refreshed movement. The standard 114200 always carried a closed dial, and Rolex never produced a factory skeleton Oyster Perpetual. The Oyster Perpetual 114200 Super Clone carries that 34mm heritage onto the wrist with a custom open-worked dial that turns the classic time-only reference into a movement showcase.
Every Rolex Oyster Perpetual 114200 super clone passes a four-stage quality control sequence before shipping. The QC steps are listed below.
The Oyster Perpetual 114200 Super Clone ships in secure, discreet packaging to protect your privacy. The full package contents are listed below.
The Rolex Oyster Perpetual 114200 super clone ships within 24 hours of order confirmation via DHL Express or FedEx Priority with full insurance and discreet packaging. Worldwide delivery lands in 5 to 10 business days across the USA, UK, UAE, India, and Europe. Every watch carries a 1-year limited warranty covering movement defects, with replacement-parts support and servicing guidance provided after purchase. The support channels for the Oyster Perpetual 114200 Super Clone are listed below.
Real owners of the Rolex Oyster Perpetual 114200 super clone share the wrist-side verdict. Ratings average 4.9 / 5 across 142 verified orders.
"I wanted something different from a plain closed dial, and the open-worked skeleton face on this 114200 delivers. The cut-out edges are clean and the balance wheel ticking away is hypnotic. The 34mm steel case feels solid and the polished bezel has a tight seam. At $1,249 it reads like a real piece on the wrist."
"Shipped DHL and arrived in Manchester in 6 days, packaged discreetly as described. The 34mm case sits perfectly on my 6.5 inch wrist and slips under a cuff with no problem. I have worn it daily for two months and the movement keeps good time. The skeleton dial gets noticed every week."
"I was unsure about ordering my first clone, so I asked questions on WhatsApp before buying. The team explained that the skeleton dial is a custom build and not a Rolex factory option, which I appreciated. The watch arrived in a full box set with papers. The Caliber 3130 clone runs smooth and quiet."
Yes, the Rolex Oyster Perpetual 114200 sold on Super Clone Watches is a 1:1 super clone that matches the genuine reference at 98% visual and dimensional accuracy. The build follows the 34mm steel case, the smooth polished bezel, and the Oyster bracelet geometry within tight tolerance, with one custom change to the dial. The price of $1,249 compares to a genuine closed-dial retail near $5,400 on the secondary market.
No, Rolex does not make a factory skeleton Oyster Perpetual 114200. The standard reference 114200 always carried a closed dial during its 2007 to 2020 production run. The skeleton dial on this super clone is a custom open-worked feature offered by Super Clone Watches that exposes the Caliber 3130 clone movement underneath, and buyers should know it is a custom build rather than a standard Rolex option.
A Swiss-grade automatic clone of Rolex Caliber 3130 powers this Oyster Perpetual 114200 super clone. The movement runs at 28,800 vibrations per hour, holds a power reserve of approximately 48 hours, and drives the hours, minutes, and seconds. Performance matches the genuine caliber on frequency and autonomy, with a smooth sweeping seconds hand and a quiet winding rotor that stays visible through the skeleton dial.
The Oyster Perpetual 114200 case measures 34mm in diameter and 11.6mm in thickness. The compact 34mm size suits smaller and mid-size wrists from 6 to 7.5 inches and wears as a versatile unisex watch. The slim case profile slides easily under a shirt cuff, which keeps the 114200 super clone suited to both dress and daily wear.
No, the Oyster Perpetual 114200 does not have a date. The Oyster Perpetual is a time-only automatic watch with no date and no extra complications, which keeps the dial clean and balanced. The skeleton-dial build of this super clone uses that no-date layout to keep the open-worked center fully symmetrical around the exposed movement.
The difference between the 114200 and the 124300 is case size, production era, and movement. The Oyster Perpetual 114200 carries a 34mm case and Caliber 3130 and was produced from about 2007 to 2020, while the 124300 carries a 41mm case and Caliber 3230 and replaced it in 2020. Buyers select the 114200 super clone for the compact classic size, and this version adds a custom skeleton dial the standard references do not offer.
The authentic Rolex Oyster Perpetual 114200 trades near $5,400 on the pre-owned market in standard closed-dial form. This super clone sells for $1,249, which delivers 98% visual and functional parity at roughly 23% of the genuine market price. Buyers receive the full 34mm steel Oyster Perpetual wrist presence plus a custom open-worked dial without the capital commitment.
A 1-year limited warranty covers movement defects and manufacturing faults on this Oyster Perpetual 114200 super clone. Replacement parts sourcing runs through the originating factory via Super Clone Watches support. Movement servicing guidance is provided through WhatsApp and email for the lifetime of the watch.
