| Reference | 114200 |
|---|---|
| Case | 34mm × 11.5mm, gold-tone coated steel |
| Dial | Custom open-worked skeleton with gold-tone markers |
The Oyster Perpetual 114200 is the 34mm time-only Rolex, presented here in a yellow gold-tone finish with a custom open-worked skeleton dial. This super clone follows the 114200 reference with a smooth bezel, gold-tone hands and hour markers, central hour, minute, and seconds hands, and the three-piece-link Oyster bracelet for $1,349. The watch carries no date and no complication, and the skeleton dial replaces the genuine closed dial to show the movement underneath. The gold-tone coating and the skeleton dial are custom features on this build rather than standard Rolex factory options for the 114200.
The Rolex Oyster Perpetual 114200 super clone carries a 34mm Oyster case measuring 11.5mm thick, built on a 904L stainless steel core for accurate weight and corrosion resistance. The case wears a yellow gold-tone PVD coating with a high mirror polish, a custom finish applied over the steel structure for a warm precious-metal look. The screw-down Twinlock crown at 3 o'clock seals the case for water resistance to 100 meters.
The smooth fixed bezel of this 114200 super clone carries the same gold-tone coating as the case and holds a clean, polished surface with no engraving. The smooth profile keeps the Oyster Perpetual understated and frames the skeleton dial without distraction. The bezel pairs with the gold-tone case flanks and gives the 34mm watch a compact, dress-leaning proportion.
Scratch-resistant sapphire crystal with anti-reflective coating covers the skeleton dial and keeps the open-worked layout clear in direct light. The crystal sits slightly domed to match the genuine 114200 profile. The solid screw-down caseback seals the Caliber 3130 clone movement and supports water resistance to 100 meters, backed by the Twinlock crown system.
The custom skeleton dial of this Oyster Perpetual 114200 super clone removes the solid dial plate and exposes the bridges, gear train, and balance wheel of the movement. The open-worked layout is a custom modification on this build, since the genuine 114200 ships with a closed dial in steel finish only. The dial keeps the time-only structure with no date aperture, which holds the open architecture fully symmetrical.
The Oyster Perpetual 114200 carries gold-tone applied hour markers and gold-tone baton hands set against the open-worked dial for clear time reading over the exposed movement. The central seconds hand sweeps smoothly across the skeleton layout and confirms the watch is running at a glance. The hands and markers match the genuine reference in shape and proportion and carry the warm gold tone of the case finish.
The applied Rolex coronet sits at 12 o'clock above the open-worked center, with "Rolex Oyster Perpetual" printed in fine text on the upper section of the dial. The minute track frames the dial edge with even spacing, and the absence of a date keeps the gold-tone markers evenly distributed around the skeleton dial. The gold-tone case, the open-worked center, and the smooth bezel give the 114200 a balanced, distinctive face.
The Rolex Oyster Perpetual 114200 super clone runs on a Swiss-grade automatic movement engineered to match the genuine Rolex Caliber 3130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a power reserve of approximately 48 hours. The Caliber 3130 is a time-only movement, so it drives the hours, minutes, and seconds with no date mechanism, and the skeleton dial places that movement on full view.
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 3130. The smooth sweeping seconds hand and the quiet winding rotor confirm the Swiss-grade build, both visible through the open-worked skeleton dial. The approximately 48-hour power reserve carries the 114200 super clone through two full days off the wrist before it needs winding.
Spec grid:
The Oyster Perpetual 114200 super clone carries the Oyster bracelet, the three-piece-link design Rolex pairs with the model. The bracelet wears the same yellow gold-tone coating as the case, with brushed outer links and a polished center accent, tapering smoothly from the lugs toward the wrist. A folding Oysterclasp closes flush against the wrist and holds the bracelet securely through daily wear. The Oyster Perpetual 114200 uses the Oyster bracelet and never a President bracelet.
The watch weighs approximately 115 grams on the full gold-tone Oyster bracelet, giving the light, balanced wrist presence buyers expect from a 34mm Oyster Perpetual. The compact case suits smaller and medium wrists and works as a unisex size. The 34mm case and flat three-link bracelet sit comfortably on wrists from 6 to 7.5 inches.
The Rolex Oyster Perpetual 114200 super clone carries a 34mm Oyster case measuring 11.5mm thick, built on a 904L stainless steel core for accurate weight and corrosion resistance. The case wears a yellow gold-tone PVD coating with a high mirror polish, a custom finish applied over the steel structure for a warm precious-metal look. The screw-down Twinlock crown at 3 o'clock seals the case for water resistance to 100 meters.
The smooth fixed bezel of this 114200 super clone carries the same gold-tone coating as the case and holds a clean, polished surface with no engraving. The smooth profile keeps the Oyster Perpetual understated and frames the skeleton dial without distraction. The bezel pairs with the gold-tone case flanks and gives the 34mm watch a compact, dress-leaning proportion.
Scratch-resistant sapphire crystal with anti-reflective coating covers the skeleton dial and keeps the open-worked layout clear in direct light. The crystal sits slightly domed to match the genuine 114200 profile. The solid screw-down caseback seals the Caliber 3130 clone movement and supports water resistance to 100 meters, backed by the Twinlock crown system.
The custom skeleton dial of this Oyster Perpetual 114200 super clone removes the solid dial plate and exposes the bridges, gear train, and balance wheel of the movement. The open-worked layout is a custom modification on this build, since the genuine 114200 ships with a closed dial in steel finish only. The dial keeps the time-only structure with no date aperture, which holds the open architecture fully symmetrical.
The Oyster Perpetual 114200 carries gold-tone applied hour markers and gold-tone baton hands set against the open-worked dial for clear time reading over the exposed movement. The central seconds hand sweeps smoothly across the skeleton layout and confirms the watch is running at a glance. The hands and markers match the genuine reference in shape and proportion and carry the warm gold tone of the case finish.
The applied Rolex coronet sits at 12 o'clock above the open-worked center, with "Rolex Oyster Perpetual" printed in fine text on the upper section of the dial. The minute track frames the dial edge with even spacing, and the absence of a date keeps the gold-tone markers evenly distributed around the skeleton dial. The gold-tone case, the open-worked center, and the smooth bezel give the 114200 a balanced, distinctive face.
The Rolex Oyster Perpetual 114200 super clone runs on a Swiss-grade automatic movement engineered to match the genuine Rolex Caliber 3130 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a power reserve of approximately 48 hours. The Caliber 3130 is a time-only movement, so it drives the hours, minutes, and seconds with no date mechanism, and the skeleton dial places that movement on full view.
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 3130. The smooth sweeping seconds hand and the quiet winding rotor confirm the Swiss-grade build, both visible through the open-worked skeleton dial. The approximately 48-hour power reserve carries the 114200 super clone through two full days off the wrist before it needs winding.
Spec grid:
The Oyster Perpetual 114200 super clone carries the Oyster bracelet, the three-piece-link design Rolex pairs with the model. The bracelet wears the same yellow gold-tone coating as the case, with brushed outer links and a polished center accent, tapering smoothly from the lugs toward the wrist. A folding Oysterclasp closes flush against the wrist and holds the bracelet securely through daily wear. The Oyster Perpetual 114200 uses the Oyster bracelet and never a President bracelet.
The watch weighs approximately 115 grams on the full gold-tone Oyster bracelet, giving the light, balanced wrist presence buyers expect from a 34mm Oyster Perpetual. The compact case suits smaller and medium wrists and works as a unisex size. The 34mm case and flat three-link bracelet sit comfortably on wrists from 6 to 7.5 inches.
The 34mm Oyster Perpetual offers a steel original and several custom finishes, and this 114200 holds the gold-tone case with the open-worked skeleton dial. The comparison of the three options is listed below.
| Variant | Case Size | Finish & Dial | Super Clone Price |
|---|---|---|---|
| 114200 Gold Skeleton (this reference) | 34mm | Gold-tone, open-worked skeleton dial | $1,349 |
| 114200 Steel Closed Dial | 34mm | Steel, closed silver dial | $1,249 |
| 124200 Steel 36mm | 36mm | Steel, closed lacquer dial | $1,299 |
Buyers select the 114200 gold skeleton for the warm precious-metal look and the open-worked dial that shows the movement at work. Steel closed-dial buyers prefer the most faithful original 114200 presentation. The 36mm 124200 buyer chooses the slightly larger current case for a more modern proportion. The 114200 gold skeleton Super Clone gives the most distinctive face of the three, with the gold tone and exposed movement that set this custom build apart.
The Rolex Oyster Perpetual carries the two ideas that define the brand, the waterproof Oyster case of 1926 and the self-winding Perpetual rotor of 1931. The Oyster case was the first waterproof wristwatch case, sealed by a screw-down crown, bezel, and caseback. The Perpetual rotor introduced automatic winding through a freely rotating weight, which removed the need for daily hand-winding. Rolex combined both into the Oyster Perpetual, the purest expression of the brand with no date and no complication. The 34mm reference 114200 ran from the mid-2000s as the mid-size Oyster Perpetual, fitted with the smooth bezel, the Oyster bracelet, and the in-house Caliber 3130. Rolex built the genuine 114200 in steel with closed dials. The gold-tone finish and the open-worked skeleton dial on this build are custom features added by the originating factory, not standard 114200 options. The 114200 Super Clone carries the Oyster case and Perpetual movement heritage onto the wrist in a custom skeleton presentation.
Every Rolex Oyster Perpetual 114200 super clone passes a four-stage quality control sequence before shipping. The QC steps are listed below.
The 114200 Super Clone ships in secure, discreet packaging to protect your privacy. The full package contents are listed below.
The Rolex Oyster Perpetual 114200 super clone ships within 24 hours of order confirmation via DHL Express or FedEx Priority with full insurance and discreet packaging. Worldwide delivery lands in 5 to 10 business days across the USA, UK, UAE, India, and Europe. Every watch carries a 1-year limited warranty covering movement defects, with replacement-parts support and servicing guidance provided after purchase. The support channels for the 114200 Super Clone are listed below.
Real owners of the Rolex Oyster Perpetual 114200 super clone share the wrist-side verdict. Ratings average 4.9 / 5 across 142 verified orders.
"I wanted a gold-tone 34mm Oyster Perpetual, and the coating on this 114200 is even and warm across the case, bezel, and bracelet. The open skeleton dial shows the movement turning and looks far more interesting than a plain dial. At $1,349 it reads like a genuine gold piece on the wrist."
"Shipped DHL and arrived in Manchester in 6 days. The packaging was discreet exactly as described. The open-worked dial lets you watch the balance wheel move, and the gold-tone hands stay easy to read against it. The 34mm case wears light and comfortable on my wrist."
"I was nervous spending this much on my first clone. WhatsApp support explained that the gold finish and skeleton dial are custom features before I ordered. The watch arrived in a full box set with papers. The Caliber 3130 clone keeps steady time and the skeleton view is the part everyone notices."
Yes, the Rolex Oyster Perpetual 114200 sold on Super Clone Watches is a 1:1 super clone that matches the genuine Rolex reference at 98% visual and dimensional accuracy. The build follows the 34mm case proportions, the smooth bezel, and the Oyster bracelet geometry within tight tolerance, with a custom gold-tone finish and open-worked skeleton dial. The price of $1,349 compares to a genuine steel 114200 market figure near $5,200.
A Swiss-grade automatic clone of Rolex Caliber 3130 powers this Oyster Perpetual 114200 super clone. The movement runs at 28,800 vibrations per hour, holds a power reserve of approximately 48 hours, and drives the hours, minutes, and seconds with no date mechanism. Performance matches the genuine caliber on frequency and autonomy, with a smooth sweeping seconds hand and a quiet winding rotor visible through the skeleton dial.
No, the gold-tone finish and the skeleton dial are not standard Rolex options for the 114200. Rolex produced the genuine 114200 in stainless steel with closed dials only, so this gold-tone coating and open-worked skeleton dial are custom features added by the originating factory on this super clone build. The base reference, the 34mm Oyster Perpetual 114200, remains accurate to the genuine model.
No, the Oyster Perpetual 114200 does not have a date window. The Oyster Perpetual is the time-only Rolex, so the 114200 shows only hours, minutes, and seconds, which keeps the skeleton dial layout symmetrical. This super clone follows that clean date-free design while opening the dial to show the movement.
The Oyster Perpetual 114200 super clone measures 34mm in diameter and 11.5mm in thickness. The 34mm case is a compact, mid-size proportion that wears as a unisex watch and sits comfortably on wrists from 6 to 7.5 inches. The case uses a 904L steel core under a yellow gold-tone coating for accurate weight and a warm finish.
Buyers choose the gold skeleton Oyster Perpetual for the warm precious-metal look and the open-worked dial that shows the movement at work. The gold-tone coating lifts the compact 34mm design, and the skeleton dial gives the watch more visual depth than a closed dial. This super clone delivers that custom presentation on the faithful 114200 case and Caliber 3130 base.
The authentic steel Rolex Oyster Perpetual 114200 trades near $5,200 on the secondary market, since Rolex has discontinued the reference. This super clone sells for $1,349, which delivers 98% visual and functional parity at roughly 26% of the genuine market price, with a custom gold-tone finish and skeleton dial. Buyers receive the full 34mm Oyster Perpetual wrist presence without the capital commitment.
The Rolex Oyster Perpetual 114200 super clone ships via DHL Express or FedEx Priority with full insurance and tracked, signature-required delivery. The watch travels in secure, discreet packaging to protect your privacy. Transit time runs 5 to 10 business days to the USA, UK, UAE, India, and Europe, and the shipping cost is included in the price.
