| Reference | 116718LN |
|---|---|
| Case | 40mm × 12.5mm, 18k yellow gold |
| Dial | Black with luminous markers |
The GMT-Master II 116718LN is the all-yellow-gold version of the Rolex GMT-Master II, paired here with a black dial and the black Cerachrom ceramic 24-hour bezel. This super clone reproduces the 116718LN reference with an independent 24-hour GMT hand, a date at 3 o'clock, and the yellow gold Jubilee bracelet for $1,499. Every proportion, bezel marking, and bracelet link follows the genuine reference within tight production tolerance.
The Rolex GMT-Master II 116718LN super clone carries a 40mm Oyster case measuring 12.5mm thick, built with an 18k yellow gold-tone finish for accurate weight and warm color. The case shows the polished surfaces and Twinlock screw-down crown that mark the genuine gold GMT-Master II. The crown and case construction seal the movement for water resistance to 100 meters.
The black Cerachrom bezel rings the dial with a 24-hour graduated scale that rotates in both directions to track a second time zone. Cerachrom is the hard ceramic Rolex uses for scratch and fade resistance, and this super clone uses the deep black finish with gold-toned numerals that hold their contrast over years of wear. The bidirectional bezel clicks into 24 positions, letting the wearer read a third time zone against the GMT hand.
Scratch-resistant sapphire crystal with anti-reflective coating covers the black dial and keeps the readings clear in direct light. The Cyclops lens over the date at 3 o'clock magnifies the date for quick reading, matching the genuine 116718LN. The solid screw-down caseback seals the Caliber 3186 clone movement and supports water resistance to 100 meters.
The black dial of this GMT-Master II 116718LN super clone carries a glossy black surface that frames applied hour markers in a gold-tone surround. The markers and hands hold luminous material for night legibility against the dark dial. The maxi-dial layout uses larger markers and broader hands for the high-visibility look the modern GMT-Master II is known for.
The dial carries the independent 24-hour GMT hand that reads the second time zone against the rotating Cerachrom bezel. The hour and minute hands use the Rolex Mercedes design, and the GMT hand ends in a luminous arrow tip for clear separation from the local-time hands. The date sits at 3 o'clock beneath the Cyclops lens and advances with the local hour hand on the 116718LN super clone.
The applied Rolex coronet sits at 12 o'clock, with "Rolex Oyster Perpetual Date GMT-Master II Superlative Chronometer Officially Certified" printed in crisp, fine text across the dial. The minute track frames the dial edge with even spacing. The black dial, gold-tone markers, and gold case give the 116718LN a warm, high-contrast balance.
The Rolex GMT-Master II 116718LN super clone runs on a Swiss-grade automatic movement engineered to reproduce the genuine Rolex Caliber 3186 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 48-hour power reserve for two days off the wrist. The caliber drives the independent 24-hour GMT hand and the quick-set date.
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 3186. The smooth sweeping seconds hand and the quiet rotor confirm the Swiss-grade build. The local hour hand jumps in one-hour steps for fast time-zone changes, and the GMT hand stays synced to the 24-hour bezel on the 116718LN super clone.
Spec grid:
The GMT-Master II 116718LN super clone carries the Jubilee bracelet, the five-piece-link design Rolex introduced in 1945 for the dressier side of the catalog. The bracelet uses an 18k yellow gold-tone finish with polished center links and a smooth taper from the lugs toward the wrist. A concealed Oysterclasp folding clasp closes flush and keeps the gold links uninterrupted around the wrist.
The watch weighs approximately 165 grams on the full Jubilee bracelet, giving the substantial wrist presence buyers expect from a solid gold-tone Rolex. The five-piece-link construction wraps the wrist closely and gives the Jubilee its softer, more flexible feel than the Oyster bracelet. The 40mm case and tapered Jubilee bracelet sit comfortably on wrists from 6.5 to 8 inches.
The Rolex GMT-Master II 116718LN super clone carries a 40mm Oyster case measuring 12.5mm thick, built with an 18k yellow gold-tone finish for accurate weight and warm color. The case shows the polished surfaces and Twinlock screw-down crown that mark the genuine gold GMT-Master II. The crown and case construction seal the movement for water resistance to 100 meters.
The black Cerachrom bezel rings the dial with a 24-hour graduated scale that rotates in both directions to track a second time zone. Cerachrom is the hard ceramic Rolex uses for scratch and fade resistance, and this super clone uses the deep black finish with gold-toned numerals that hold their contrast over years of wear. The bidirectional bezel clicks into 24 positions, letting the wearer read a third time zone against the GMT hand.
Scratch-resistant sapphire crystal with anti-reflective coating covers the black dial and keeps the readings clear in direct light. The Cyclops lens over the date at 3 o'clock magnifies the date for quick reading, matching the genuine 116718LN. The solid screw-down caseback seals the Caliber 3186 clone movement and supports water resistance to 100 meters.
The black dial of this GMT-Master II 116718LN super clone carries a glossy black surface that frames applied hour markers in a gold-tone surround. The markers and hands hold luminous material for night legibility against the dark dial. The maxi-dial layout uses larger markers and broader hands for the high-visibility look the modern GMT-Master II is known for.
The dial carries the independent 24-hour GMT hand that reads the second time zone against the rotating Cerachrom bezel. The hour and minute hands use the Rolex Mercedes design, and the GMT hand ends in a luminous arrow tip for clear separation from the local-time hands. The date sits at 3 o'clock beneath the Cyclops lens and advances with the local hour hand on the 116718LN super clone.
The applied Rolex coronet sits at 12 o'clock, with "Rolex Oyster Perpetual Date GMT-Master II Superlative Chronometer Officially Certified" printed in crisp, fine text across the dial. The minute track frames the dial edge with even spacing. The black dial, gold-tone markers, and gold case give the 116718LN a warm, high-contrast balance.
The Rolex GMT-Master II 116718LN super clone runs on a Swiss-grade automatic movement engineered to reproduce the genuine Rolex Caliber 3186 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 48-hour power reserve for two days off the wrist. The caliber drives the independent 24-hour GMT hand and the quick-set date.
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 3186. The smooth sweeping seconds hand and the quiet rotor confirm the Swiss-grade build. The local hour hand jumps in one-hour steps for fast time-zone changes, and the GMT hand stays synced to the 24-hour bezel on the 116718LN super clone.
Spec grid:
The GMT-Master II 116718LN super clone carries the Jubilee bracelet, the five-piece-link design Rolex introduced in 1945 for the dressier side of the catalog. The bracelet uses an 18k yellow gold-tone finish with polished center links and a smooth taper from the lugs toward the wrist. A concealed Oysterclasp folding clasp closes flush and keeps the gold links uninterrupted around the wrist.
The watch weighs approximately 165 grams on the full Jubilee bracelet, giving the substantial wrist presence buyers expect from a solid gold-tone Rolex. The five-piece-link construction wraps the wrist closely and gives the Jubilee its softer, more flexible feel than the Oyster bracelet. The 40mm case and tapered Jubilee bracelet sit comfortably on wrists from 6.5 to 8 inches.
The GMT-Master II offers a yellow gold edition, a newer-generation gold model, and a steel sibling, and the 116718LN holds the all-gold black-dial configuration. The comparison of the three variants is listed below.
| Variant | Case Material | Movement | Super Clone Price |
|---|---|---|---|
| 116718LN (this reference) | 18k yellow gold | Caliber 3186 clone | $1,499 |
| 126718GRNR | 18k yellow gold | Caliber 3285 clone | $1,499 |
| 116710LN | Oystersteel | Caliber 3186 clone | $1,449 |
Buyers select the 116718LN for the warm all-gold look with the discreet black ceramic bezel, the dressiest GMT-Master II configuration. The 126718GRNR buyer chooses the current generation, which carries the Caliber 3285 with a 70-hour power reserve and a grey-and-black bezel. The 116710LN buyer prefers the steel case for a lower price and a more understated daily wear. The 116718LN Super Clone on the Jubilee bracelet gives the most formal dual-time presentation of the three.
The Rolex GMT-Master launched in 1955 as a dual-time tool watch built for Pan American World Airways pilots crossing multiple time zones. Rolex paired a rotating 24-hour bezel with an extra hour hand so pilots could read home time and local time at once. The model gained the GMT-Master II name in 1982 with the reference 16760, which added an independently adjustable local hour hand for faster time-zone changes. Rolex moved the model to the in-house Caliber 3186 in the 116710 generation and introduced the black Cerachrom ceramic bezel in 2005. The all-yellow-gold reference 116718LN arrived in 2005 with the black ceramic bezel and the black dial. The 116718LN Super Clone carries that combined heritage of the GMT-Master pilot watch and the modern ceramic bezel onto the wrist.
Every Rolex GMT-Master II 116718LN super clone passes a four-stage quality control sequence before shipping. The QC steps are listed below.
The 116718LN Super Clone ships in secure, discreet packaging to protect your privacy. The full package contents are listed below.
The Rolex GMT-Master II 116718LN super clone ships within 24 hours of order confirmation via DHL Express or FedEx Priority with full insurance and discreet packaging. Worldwide delivery lands in 5 to 10 business days across the USA, UK, UAE, India, and Europe. Every watch carries a 1-year limited warranty covering movement defects, with replacement-parts support and servicing guidance provided after purchase. The support channels for the 116718LN Super Clone are listed below.
Real owners of the Rolex GMT-Master II 116718LN super clone share the wrist-side verdict. Ratings average 4.9 / 5 across 138 verified orders.
"I wanted the all-gold GMT with the black bezel, and the yellow gold finish on this one has a deep, even color with no patchiness. The black ceramic bezel rotates with firm clicks. The Jubilee bracelet feels supple on the wrist. At $1,499 it carries the presence of the real piece."
"Shipped DHL and arrived in Dubai in 6 days. The packaging was discreet exactly as described. The independent GMT hand adjusts cleanly and the date snaps over right at midnight. The weight feels close to a real solid gold Rolex."
"I was nervous spending this much on a gold-tone clone. WhatsApp support answered every question before I ordered. The watch arrived in a full box set with papers. The Cerachrom bezel and the Jubilee bracelet closed the deal for me."
Yes, the Rolex GMT-Master II 116718LN sold on Super Clone Watches is a 1:1 super clone that reproduces the genuine Rolex reference at 98% visual and dimensional accuracy. The build matches the black dial, the black Cerachrom ceramic 24-hour bezel, and the yellow gold Jubilee bracelet geometry within tight tolerance. The price of $1,499 compares to a genuine retail near $39,650 at authorized Rolex dealers.
A Swiss-grade automatic clone of Rolex Caliber 3186 powers this GMT-Master II 116718LN super clone. The movement runs at 28,800 vibrations per hour, holds a 48-hour power reserve, and drives the independent 24-hour GMT hand and the quick-set date. Performance matches the genuine caliber on frequency and autonomy, with a smooth sweeping seconds hand and a quiet winding rotor.
The 24-hour GMT function on the 116718LN super clone reads a second time zone through the extra GMT hand and the rotating Cerachrom bezel. The GMT hand circles the dial once every 24 hours and points to the second time zone on the bezel scale. The local hour hand adjusts independently in one-hour jumps, so the wearer changes time zones without stopping the movement.
Yes, the Jubilee bracelet differs from the Oyster bracelet in link count and dress register. The Jubilee uses a five-piece-link construction that wraps the wrist with a softer, more flexible feel, while the Oyster uses three flat links for a sportier look. Rolex introduced the Jubilee in 1945, and the 116718LN super clone carries it for the dressier all-gold presentation.
The case uses an 18k yellow gold-tone construction finished to match the warm color and weight of the genuine gold GMT-Master II. This construction gives the substantial wrist weight and the rich gold appearance buyers expect from the reference. The gold-tone finish on the 116718LN super clone holds a high polish and resists daily marks for long-term wear.
The authentic Rolex GMT-Master II 116718LN retails near $39,650 at authorized dealers and trades above that on the secondary market. This super clone sells for $1,499, which delivers 98% visual and functional parity at roughly 4% of the genuine retail price. Buyers receive the full yellow gold GMT-Master II wrist presence without the capital commitment or the dealer waitlist.
The Rolex GMT-Master II 116718LN super clone ships via DHL Express or FedEx Priority with full insurance and tracked, signature-required delivery. The watch travels in secure, discreet packaging to protect your privacy. Transit time runs 5 to 10 business days to the USA, UK, UAE, India, and Europe, and the shipping cost is included in the price.
A 1-year limited warranty covers movement defects and manufacturing faults on this GMT-Master II 116718LN super clone. Replacement parts sourcing runs through the originating factory via Super Clone Watches support. Movement servicing guidance is provided through WhatsApp and email for the lifetime of the watch.
