| Reference | 116710 Full Diamond |
|---|---|
| Case | 40mm × 12.5mm, diamond-set steel |
| Dial | Pave simulated diamond dial |
The GMT-Master II 116710 Full Diamond is a fully iced-out version of the Rolex travel watch, set with high-grade simulated diamonds across the case, bezel, dial, and bracelet. This super clone builds the 116710 reference with a 24-hour GMT hand, a fixed diamond-set bezel, a date at 3 o'clock, and a diamond-set Oyster bracelet for $1,699. Every diamond row, case proportion, and bracelet link follows a genuine custom-set GMT-Master II within tight production tolerance.
The Rolex GMT-Master II 116710 Full Diamond super clone carries a 40mm Oyster case measuring 12.5mm thick, built on a 904L stainless steel core for accurate weight and corrosion resistance. The case sides and lugs are channel-set with rows of high-grade simulated diamonds, giving the full iced-out coverage that defines this custom build. The screw-down Triplock crown at 3 o'clock seals the case for water resistance to 100 meters.
The diamond-set bezel replaces the rotating 24-hour ceramic insert of the standard 116710 with a fixed gem-set ring. The bezel is pave-set with closely matched simulated diamonds in a continuous ring around the crystal, a configuration that frames the dial and completes the iced-out look. The fixed diamond bezel marks the custom-set 116710 as a statement piece rather than a tool-style travel watch.
Scratch-resistant sapphire crystal with anti-reflective coating covers the pave diamond dial and keeps the time and date readings clear in direct light. A Cyclops lens sits over the date window at 3 o'clock and magnifies the date for quick reading. The solid screw-down caseback seals the Caliber 3186 clone movement and supports water resistance to 100 meters, backed by the Triplock crown system.
The pave dial of this GMT-Master II 116710 Full Diamond super clone is fully set with high-grade simulated diamonds across the entire surface for an unbroken iced-out face. The dial holds a date aperture at 3 o'clock and applied hour markers that read against the diamond pave. The pave field gives the 116710 a bright, light-catching dial that pairs with the diamond-set bezel and bracelet.
The GMT-Master II 116710 Full Diamond carries an independently adjustable 24-hour GMT hand tipped with a triangular pointer. The GMT hand tracks a second time zone, while the central hour, minute, and seconds hands show local time across the pave dial. The Mercedes-style hour hand and the broad minute hand match the genuine reference and carry a luminous fill for legibility against the diamond surface.
The applied Rolex coronet sits at 12 o'clock, with "Rolex Oyster Perpetual Date GMT-Master II" printed in crisp, fine text against the pave field. The hour markers and minute track hold even spacing around the dial edge. The pave diamond dial, the diamond-set bezel, and the polished hand set give the 116710 Full Diamond a balanced, high-shine face across the iced-out case.
The Rolex GMT-Master II 116710 Full Diamond super clone runs on a Swiss-grade automatic movement engineered to reproduce the genuine Rolex Caliber 3186 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 48-hour power reserve for two days off the wrist. The caliber drives the independently adjustable 24-hour GMT hand and the quickset date.
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 3186. The smooth sweeping seconds hand and the quiet rotor confirm the Swiss-grade build. The local hour hand jumps in one-hour steps without stopping the seconds hand, which lets the 116710 Full Diamond super clone change time zones cleanly while traveling.
Spec grid:
The GMT-Master II 116710 Full Diamond super clone carries a diamond-set Oyster bracelet, the three-piece-link design set with high-grade simulated diamonds across the links for full iced-out continuity. The bracelet uses a 904L steel core under the diamond setting, tapering smoothly from the lugs toward the wrist. A folding Oysterlock safety clasp prevents accidental opening and closes flush against the wrist.
The watch weighs approximately 165 grams on the full diamond-set Oyster bracelet, giving the substantial wrist presence buyers expect from an iced-out GMT-Master II. The Easylink comfort extension adds roughly 5mm of length for quick adjustment as wrist size changes through the day. The 40mm diamond-set case and the diamond-set bracelet sit comfortably on wrists from 6.5 to 8 inches.
The Rolex GMT-Master II 116710 Full Diamond super clone carries a 40mm Oyster case measuring 12.5mm thick, built on a 904L stainless steel core for accurate weight and corrosion resistance. The case sides and lugs are channel-set with rows of high-grade simulated diamonds, giving the full iced-out coverage that defines this custom build. The screw-down Triplock crown at 3 o'clock seals the case for water resistance to 100 meters.
The diamond-set bezel replaces the rotating 24-hour ceramic insert of the standard 116710 with a fixed gem-set ring. The bezel is pave-set with closely matched simulated diamonds in a continuous ring around the crystal, a configuration that frames the dial and completes the iced-out look. The fixed diamond bezel marks the custom-set 116710 as a statement piece rather than a tool-style travel watch.
Scratch-resistant sapphire crystal with anti-reflective coating covers the pave diamond dial and keeps the time and date readings clear in direct light. A Cyclops lens sits over the date window at 3 o'clock and magnifies the date for quick reading. The solid screw-down caseback seals the Caliber 3186 clone movement and supports water resistance to 100 meters, backed by the Triplock crown system.
The pave dial of this GMT-Master II 116710 Full Diamond super clone is fully set with high-grade simulated diamonds across the entire surface for an unbroken iced-out face. The dial holds a date aperture at 3 o'clock and applied hour markers that read against the diamond pave. The pave field gives the 116710 a bright, light-catching dial that pairs with the diamond-set bezel and bracelet.
The GMT-Master II 116710 Full Diamond carries an independently adjustable 24-hour GMT hand tipped with a triangular pointer. The GMT hand tracks a second time zone, while the central hour, minute, and seconds hands show local time across the pave dial. The Mercedes-style hour hand and the broad minute hand match the genuine reference and carry a luminous fill for legibility against the diamond surface.
The applied Rolex coronet sits at 12 o'clock, with "Rolex Oyster Perpetual Date GMT-Master II" printed in crisp, fine text against the pave field. The hour markers and minute track hold even spacing around the dial edge. The pave diamond dial, the diamond-set bezel, and the polished hand set give the 116710 Full Diamond a balanced, high-shine face across the iced-out case.
The Rolex GMT-Master II 116710 Full Diamond super clone runs on a Swiss-grade automatic movement engineered to reproduce the genuine Rolex Caliber 3186 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 48-hour power reserve for two days off the wrist. The caliber drives the independently adjustable 24-hour GMT hand and the quickset date.
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 3186. The smooth sweeping seconds hand and the quiet rotor confirm the Swiss-grade build. The local hour hand jumps in one-hour steps without stopping the seconds hand, which lets the 116710 Full Diamond super clone change time zones cleanly while traveling.
Spec grid:
The GMT-Master II 116710 Full Diamond super clone carries a diamond-set Oyster bracelet, the three-piece-link design set with high-grade simulated diamonds across the links for full iced-out continuity. The bracelet uses a 904L steel core under the diamond setting, tapering smoothly from the lugs toward the wrist. A folding Oysterlock safety clasp prevents accidental opening and closes flush against the wrist.
The watch weighs approximately 165 grams on the full diamond-set Oyster bracelet, giving the substantial wrist presence buyers expect from an iced-out GMT-Master II. The Easylink comfort extension adds roughly 5mm of length for quick adjustment as wrist size changes through the day. The 40mm diamond-set case and the diamond-set bracelet sit comfortably on wrists from 6.5 to 8 inches.
The GMT-Master II 116710 platform supports a standard tool-watch build and two diamond-set treatments, and the Full Diamond holds simulated diamonds across every visible surface. The comparison of the three builds is listed below.
| Variant | Diamond Coverage | Bezel | Super Clone Price |
|---|---|---|---|
| 116710 Full Diamond (this build) | Case, lugs, dial, bezel, bracelet | Diamond-set fixed ring | $1,699 |
| 116710 Full Diamond (dial and bezel) | Dial and bezel only | Diamond-set fixed ring | $1,599 |
| 116710LN Standard | None | Black ceramic, rotating 24-hour | $1,399 |
Buyers select the 116710 Full Diamond iced-out build for maximum diamond coverage and the highest visual impact on the wrist. The dial-and-bezel diamond build suits buyers who want a diamond face with a steel case and bracelet. The 116710LN Standard buyer prefers the original tool-watch look with a rotating ceramic bezel. The 116710 Full Diamond Super Clone gives the complete iced-out statement of the three.
The Rolex GMT-Master launched in 1955 as a tool watch built for Pan American World Airways pilots who needed to track two time zones on long-haul flights. Rolex added a fourth hand and a 24-hour bezel so a pilot could read home time alongside local time. The model gained the GMT-Master II name in 1982 with a movement that allowed the local hour hand to move independently, which made setting a new time zone faster. Rolex introduced reference 116710 in the 2000s with the Caliber 3186, a Cerachrom ceramic bezel, and the maxi-case dimensions. Custom diamond-set versions of the GMT-Master II have a long collector following, where jewelers and owners commission gem-set cases, bezels, dials, and bracelets after purchase. The 116710 Full Diamond Super Clone carries the GMT-Master II heritage into a fully iced-out custom-set form.
Every Rolex GMT-Master II 116710 Full Diamond super clone passes a four-stage quality control sequence before shipping. The QC steps are listed below.
The 116710 Full Diamond Super Clone ships in secure, discreet packaging to protect your privacy. The full package contents are listed below.
The Rolex GMT-Master II 116710 Full Diamond super clone ships within 24 hours of order confirmation via DHL Express or FedEx Priority with full insurance and discreet packaging. Worldwide delivery lands in 5 to 10 business days across the USA, UK, UAE, India, and Europe. Every watch carries a 1-year limited warranty covering movement defects, with replacement-parts support and servicing guidance provided after purchase. The support channels for the 116710 Full Diamond Super Clone are listed below.
Real owners share the verdict.
I wanted a full iced-out GMT and this one delivers. The pave dial is fully covered and the diamond bezel sits tight with matched stones. The simulated diamonds throw a bright sparkle in any light. At $1,699 it looks like a custom-set piece worth far more.
Shipped DHL and arrived in Dubai in 6 days. The packaging was discreet exactly as described. Every link on the bracelet is set with stones and none feel loose. The GMT hand sets independently and the date quickset clicks cleanly.
I was nervous spending this much on a fully diamond-set watch. WhatsApp support answered every question about the stones before I ordered. The watch arrived in a full box set with papers. The diamond case and lugs closed the deal for me.
Yes, the Rolex GMT-Master II 116710 Full Diamond sold on Super Clone Watches is a 1:1 super clone that reproduces a genuine custom-set GMT-Master II at 98% visual and dimensional accuracy. The build matches the pave diamond dial, the diamond-set bezel, and the diamond-set Oyster bracelet within tight tolerance. The price of $1,699 compares to a genuine custom-set retail near $48,000.
No, the diamonds on this 116710 Full Diamond are high-grade simulated stones, not mined diamonds. The simulated diamonds match the cut, clarity, and light return of fine mined stones at a fraction of the cost, which keeps the iced-out watch at the $1,699 price point. The case, lugs, bezel, dial, and bracelet all carry these high-grade simulated diamonds for full iced-out coverage.
A Swiss-grade automatic clone of Rolex Caliber 3186 powers this GMT-Master II 116710 Full Diamond super clone. The movement runs at 28,800 vibrations per hour, holds a 48-hour power reserve, and drives the independently adjustable 24-hour GMT hand and the quickset date. Performance matches the genuine caliber on frequency and autonomy, with a smooth sweeping seconds hand and a quiet winding rotor.
No, the diamond-set bezel on this 116710 Full Diamond does not rotate. The custom build replaces the rotating 24-hour ceramic insert of the standard 116710 with a fixed gem-set ring of high-grade simulated diamonds. The watch still tracks a second time zone through the independently adjustable 24-hour GMT hand.
The GMT function on this 116710 Full Diamond tracks a second time zone using a fourth hand. The 24-hour GMT hand points to home time, while the central hour hand shows local time and adjusts in one-hour steps for fast time-zone changes. The independent GMT hand keeps the 116710 Full Diamond super clone a true travel watch even with the fixed diamond-set bezel.
An authentic custom diamond-set Rolex GMT-Master II 116710 retails near $48,000 once a jeweler sets the case, bezel, dial, and bracelet, well above the standard steel reference. This super clone sells for $1,699, which delivers 98% visual parity at roughly 4% of the genuine custom-set price. Buyers receive the full iced-out wrist presence without the custom-setting cost.
The Rolex GMT-Master II 116710 Full Diamond super clone ships via DHL Express or FedEx Priority with full insurance and tracked, signature-required delivery. The watch travels in secure, discreet packaging to protect your privacy. Transit time runs 5 to 10 business days to the USA, UK, UAE, India, and Europe, and the shipping cost is included in the price.
A 1-year limited warranty covers movement defects and manufacturing faults on this GMT-Master II 116710 Full Diamond super clone. Replacement parts sourcing runs through the originating factory via Super Clone Watches support. Movement servicing guidance is provided through WhatsApp and email for the lifetime of the watch.
