| Reference | 116710 |
|---|---|
| Case | 40mm × 12.5mm, blackout-coated steel |
| Dial | Black with single red GMT-Master II text |
The GMT-Master II 116710 is the steel dual-time Rolex produced from about 2007 to 2019, and this super clone presents it in the Blaken blackout style with a coated case and bracelet, an all-black ceramic bezel, and a black dial. This Blaken Single Red GMT-Master II Super Clone follows the 116710 reference with a single red line of GMT-Master II dial text, a red 24-hour GMT hand, and a date display at 3 o'clock for $1,449. Every proportion, hand length, and bracelet link follows the genuine reference within tight production tolerance.
The Rolex GMT-Master II 116710 Blaken super clone carries a 40mm Oyster case measuring 12.5mm thick, built on a 904L stainless steel core and finished with a hard black coating across every surface. The blackout coating reproduces the Blaken DLC-style treatment, which gives the steel a deep matte-to-satin black tone and adds scratch resistance for daily wear. The Triplock screw-down crown sits at 3 o'clock and seals the case against water to 100 meters.
The all-black ceramic bezel rings the dial with a graduated 24-hour scale that pairs with the red GMT hand to read a second time zone. The bezel rotates in both directions through 120 clicks, so the wearer can track a third zone by aligning the scale against the GMT hand. The hard ceramic insert resists scratches and holds its deep black color without fading from sunlight, matching the stealth look of a Blaken-customized 116710.
Scratch-resistant sapphire crystal with anti-reflective coating covers the black dial and keeps the time and date readings clear at any angle. A Cyclops lens magnifies the date window at 3 o'clock for quick reading. The solid screw-down caseback seals the Caliber 3186 clone movement and supports water resistance to 100 meters, and the blackout coating wraps the caseback for a consistent black finish from every side.
The black dial of this GMT-Master II 116710 Blaken super clone carries a deep, even black that sits flush with the blackout-coated case for a single-tone look. The Single Red detail places the "GMT-Master II" model line in one crisp line of red text below the center, the feature that names this build. The dial holds a date window at 3 o'clock under the Cyclops lens.
The dial carries the GMT-Master Mercedes hour hand, a baton minute hand, and a red 24-hour GMT hand that points to the bezel scale for the second time zone. The red GMT hand runs at half the speed of the hour hand and adjusts independently against the 24-hour ceramic bezel. Applied hour markers with luminous fill ring the dial and stay legible against the black surface in low light.
The applied Rolex coronet sits at 12 o'clock with "Rolex Oyster Perpetual Date" printed in crisp white text, while the "GMT-Master II" line reads in a single line of red below the center. The minute track frames the dial edge with even spacing, and the date window at 3 o'clock keeps the layout balanced. The black dial, the white text, and the single red line give the 116710 Single Red a sharp, high-contrast face against the blacked-out case.
The Rolex GMT-Master II 116710 Blaken super clone runs on a Swiss-grade automatic movement engineered to reproduce the genuine Rolex Caliber 3186 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 48-hour power reserve for two days off the wrist. The Caliber 3186 drives the independently adjustable 24-hour GMT hand, which is the function that defines the GMT-Master II.
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 3186. The hour hand jumps in one-hour steps for quick local time changes across time zones, while the 24-hour GMT hand and minute hand stay running. The smooth sweeping seconds hand and the quiet winding rotor confirm the Swiss-grade build of this 116710 Super Clone.
Spec grid:
The GMT-Master II 116710 Blaken super clone carries the three-piece-link Oyster bracelet, the bracelet Rolex pairs with the steel GMT-Master II. The bracelet wears the same blackout coating as the case, so the finish runs unbroken from the lugs to the clasp. The folding Oysterlock safety clasp closes with a firm click and holds the bracelet secure on the wrist, and the GMT-Master II uses the Oyster or Jubilee bracelet and never a President bracelet.
The watch weighs approximately 140 grams on the full bracelet, giving the solid wrist presence buyers expect from a steel GMT-Master II. The Easylink comfort extension inside the clasp adds about 5mm of length for quick fit adjustment through the day. The 40mm case and tapered Oyster bracelet sit comfortably on wrists from 6.5 to 8 inches.
The Rolex GMT-Master II 116710 Blaken super clone carries a 40mm Oyster case measuring 12.5mm thick, built on a 904L stainless steel core and finished with a hard black coating across every surface. The blackout coating reproduces the Blaken DLC-style treatment, which gives the steel a deep matte-to-satin black tone and adds scratch resistance for daily wear. The Triplock screw-down crown sits at 3 o'clock and seals the case against water to 100 meters.
The all-black ceramic bezel rings the dial with a graduated 24-hour scale that pairs with the red GMT hand to read a second time zone. The bezel rotates in both directions through 120 clicks, so the wearer can track a third zone by aligning the scale against the GMT hand. The hard ceramic insert resists scratches and holds its deep black color without fading from sunlight, matching the stealth look of a Blaken-customized 116710.
Scratch-resistant sapphire crystal with anti-reflective coating covers the black dial and keeps the time and date readings clear at any angle. A Cyclops lens magnifies the date window at 3 o'clock for quick reading. The solid screw-down caseback seals the Caliber 3186 clone movement and supports water resistance to 100 meters, and the blackout coating wraps the caseback for a consistent black finish from every side.
The black dial of this GMT-Master II 116710 Blaken super clone carries a deep, even black that sits flush with the blackout-coated case for a single-tone look. The Single Red detail places the "GMT-Master II" model line in one crisp line of red text below the center, the feature that names this build. The dial holds a date window at 3 o'clock under the Cyclops lens.
The dial carries the GMT-Master Mercedes hour hand, a baton minute hand, and a red 24-hour GMT hand that points to the bezel scale for the second time zone. The red GMT hand runs at half the speed of the hour hand and adjusts independently against the 24-hour ceramic bezel. Applied hour markers with luminous fill ring the dial and stay legible against the black surface in low light.
The applied Rolex coronet sits at 12 o'clock with "Rolex Oyster Perpetual Date" printed in crisp white text, while the "GMT-Master II" line reads in a single line of red below the center. The minute track frames the dial edge with even spacing, and the date window at 3 o'clock keeps the layout balanced. The black dial, the white text, and the single red line give the 116710 Single Red a sharp, high-contrast face against the blacked-out case.
The Rolex GMT-Master II 116710 Blaken super clone runs on a Swiss-grade automatic movement engineered to reproduce the genuine Rolex Caliber 3186 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 48-hour power reserve for two days off the wrist. The Caliber 3186 drives the independently adjustable 24-hour GMT hand, which is the function that defines the GMT-Master II.
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 3186. The hour hand jumps in one-hour steps for quick local time changes across time zones, while the 24-hour GMT hand and minute hand stay running. The smooth sweeping seconds hand and the quiet winding rotor confirm the Swiss-grade build of this 116710 Super Clone.
Spec grid:
The GMT-Master II 116710 Blaken super clone carries the three-piece-link Oyster bracelet, the bracelet Rolex pairs with the steel GMT-Master II. The bracelet wears the same blackout coating as the case, so the finish runs unbroken from the lugs to the clasp. The folding Oysterlock safety clasp closes with a firm click and holds the bracelet secure on the wrist, and the GMT-Master II uses the Oyster or Jubilee bracelet and never a President bracelet.
The watch weighs approximately 140 grams on the full bracelet, giving the solid wrist presence buyers expect from a steel GMT-Master II. The Easylink comfort extension inside the clasp adds about 5mm of length for quick fit adjustment through the day. The 40mm case and tapered Oyster bracelet sit comfortably on wrists from 6.5 to 8 inches.
The GMT-Master II offers three routes for a steel-cased buyer, and the 116710 Blaken Single Red holds the custom blackout tier. The comparison of the three variants is listed below.
| Variant | Finish | Caliber | Super Clone Price |
|---|---|---|---|
| 116710 Blaken Single Red (this build) | Full blackout coating, black dial | Caliber 3186 clone | $1,449 |
| 116710LN standard steel | Polished and brushed steel, black bezel | Caliber 3186 clone | $1,399 |
| 126710BLNR | Polished and brushed steel, blue-black bezel | Caliber 3285 clone | $1,499 |
Buyers select the 116710 Blaken Single Red for the stealth, single-tone look that the blackout coating gives a classic GMT, lifted by the one red dial line. Standard 116710LN buyers prefer the original steel GMT-Master II in its factory finish with the all-black bezel. The 126710BLNR buyer chooses the current generation with the blue-black "Batman" bezel and the longer-running Caliber 3285. The 116710 Blaken Single Red Super Clone gives the strongest blacked-out statement of the three.
The Rolex GMT-Master launched in 1955 as a dual-time watch developed with Pan American World Airways for pilots crossing time zones. Rolex added the second time zone through a 24-hour hand read against a rotating 24-hour bezel. The GMT-Master II arrived in 1982 with a movement that allowed the hour hand to be set independently, so the wearer could change local time without stopping the watch. Reference 116710LN reached the market around 2007 with a black ceramic bezel and Caliber 3186, replacing the earlier aluminum-bezel 16710, and Rolex produced it until about 2019. Blaken is an independent customizer that applies a hard all-black coating to Rolex watches, turning a standard steel GMT-Master II into a fully blacked-out timepiece. This 116710 Super Clone follows that Blaken custom interpretation, pairing the proven 116710LN GMT layout with a complete blackout finish and a single red line of dial text.
Every Rolex GMT-Master II 116710 Blaken super clone passes a four-stage quality control sequence before shipping. The QC steps are listed below.
The 116710 Super Clone ships in secure, discreet packaging to protect your privacy. The full package contents are listed below.
The Rolex GMT-Master II 116710 Blaken super clone ships within 24 hours of order confirmation via DHL Express or FedEx Priority with full insurance and discreet packaging. Worldwide delivery lands in 5 to 10 business days across the USA, UK, UAE, India, and Europe. Every watch carries a 1-year limited warranty covering movement defects, with replacement-parts support and servicing guidance provided after purchase. The support channels for the 116710 Super Clone are listed below.
Real owners of the Rolex GMT-Master II 116710 Blaken super clone share the wrist-side verdict. Ratings average 4.9 / 5 across 154 verified orders.
"I wanted a stealth GMT, and the coating on this one is consistent across the case, bezel, and bracelet with no thin spots. The single red GMT-Master II line stands out clean against the black dial. At $1,449 it looks like a real custom build."
"The red 24-hour hand adjusts on its own and the hour hand jumps in clean one-hour steps for local time. The bezel turns with a firm 120-click action. Shipped FedEx and reached London in 6 days in discreet packaging."
"I was unsure about spending this much on my first clone. WhatsApp support answered every question before I ordered. The watch arrived in a full box set, and the date Cyclops and red GMT hand line up exactly where they should on a GMT-Master II."
Yes, the Rolex GMT-Master II 116710 Blaken Single Red sold on Super Clone Watches is a 1:1 super clone that follows the genuine 116710LN reference at 98% visual and dimensional accuracy. The build matches the 40mm case proportions, the 24-hour ceramic bezel, and the red GMT hand within tight tolerance, then adds the Blaken-style blackout coating and the single red dial text. The price of $1,449 compares to a genuine 116710 with a custom blackout treatment that runs well above $20,000.
The Blaken Single Red treatment is a hard all-black coating paired with a single line of red GMT-Master II dial text. Blaken is an independent customizer that coats a standard steel Rolex case, bezel, and bracelet in a deep black DLC-style finish. This super clone reproduces that custom look with a hard black coating over a 904L stainless steel core and renders the GMT-Master II model line in one red line, so the watch shows the same stealth single-tone appearance as a Blaken-customized 116710.
The GMT function on this 116710 super clone works through a red 24-hour hand read against the rotating 24-hour ceramic bezel. The red GMT hand circles the dial once every 24 hours and points to the bezel scale to show a second time zone. The wearer rotates the 24-hour bezel to track a third zone and sets local time by jumping the hour hand in one-hour steps without stopping the movement.
A Swiss-grade automatic clone of Rolex Caliber 3186 powers this GMT-Master II 116710 super clone. The movement runs at 28,800 vibrations per hour, holds a 48-hour power reserve, and drives the independently adjustable 24-hour GMT hand. Performance matches the genuine caliber on frequency and autonomy, with a smooth sweeping seconds hand and a quiet winding rotor.
Yes, the GMT-Master II 116710 super clone has a date window at 3 o'clock under a Cyclops magnification lens. The GMT-Master II carries a date function, which sets it apart from the no-date Submariner. The Cyclops lens on the sapphire crystal enlarges the date for quick reading against the black dial.
The genuine Rolex GMT-Master II 116710LN trades well above $14,000 on the secondary market, and a Blaken custom blackout build adds further cost above that figure to roughly $22,000. This super clone sells for $1,449, which delivers 98% visual and functional parity at a small fraction of the genuine market price. Buyers receive the full blacked-out GMT-Master II wrist presence without the capital commitment.
The Rolex GMT-Master II 116710 Blaken super clone ships via DHL Express or FedEx Priority with full insurance and tracked, signature-required delivery. The watch travels in secure, discreet packaging to protect your privacy. Transit time runs 5 to 10 business days to the USA, UK, UAE, India, and Europe, and the shipping cost is included in the price.
A 1-year limited warranty covers movement defects and manufacturing faults on this GMT-Master II 116710 Blaken super clone. Replacement parts sourcing runs through the originating factory via Super Clone Watches support. Movement servicing guidance is provided through WhatsApp and email for the lifetime of the watch.
