| Reference | 116769TBR |
|---|---|
| Case | 40mm white gold tone, diamond-set case and lugs |
| Dial | Pavé simulated diamond |
The GMT-Master II 116769TBR is the fully diamond-set white gold Rolex GMT-Master II, and this super clone presents it as a complete iced-out build with simulated diamonds across the case, lugs, bezel, and dial. This full diamond GMT-Master II Super Clone keeps the independent 24-hour GMT hand and the date window at 3 o'clock for $1,699. Every stone placement, case proportion, and bracelet link follows the genuine 116769TBR reference within tight production tolerance, and all diamonds on the watch are high-grade simulated stones.
The Rolex GMT-Master II 116769TBR super clone carries a 40mm Oyster case in a white gold tone, with simulated diamonds set across the case sides and the lugs for a fully iced finish. The case core uses a precision-machined alloy plated to a bright white gold color that holds its tone over years of wear. The Triplock screw-down crown at 3 o'clock seals the case and supports water resistance to 100 meters. The diamond-set lugs carry hand-placed simulated stones in even rows that catch light from every angle.
The diamond-set bezel rings the dial with high-grade simulated diamonds in place of the engraved 24-hour scale found on steel GMT-Master II models. The stones sit in a continuous claw setting that holds each diamond secure while keeping the metal between stones minimal for maximum brilliance. The bezel on this 116769TBR Super Clone is fixed, matching the genuine diamond-bezel GMT-Master II, where the gem-set ring replaces the rotating 24-hour insert.
Scratch-resistant sapphire crystal with anti-reflective treatment covers the pavé dial and keeps the GMT readings clear in direct light. A Cyclops lens magnifies the date at 3 o'clock for quick reading. The solid screw-down caseback in white gold tone seals the Caliber 3186 clone movement and holds water resistance to 100 meters, giving the full diamond GMT-Master II Super Clone a clean, sealed profile.
The pavé dial of this GMT-Master II 116769TBR super clone is set edge to edge with high-grade simulated diamonds, so the full face reads as a continuous sheet of brilliance. The dial holds a date window at 3 o'clock under the Cyclops lens, framed to match the genuine 116769TBR layout. The pavé setting places small simulated stones tight against one another for an even sparkle across the dial.
The dial places a 24-hour GMT hand that tracks the second time zone for the wearer. The applied hour markers carry simulated diamond accents that sit against the pavé surface, and the hour and minute hands carry luminous fill for low-light reading. The central seconds hand and the minute hand sweep the full dial, and the GMT hand tracks home time independently of the local hour hand.
The applied Rolex coronet sits at 12 o'clock with "Rolex Oyster Perpetual Date GMT-Master II" printed in crisp text across the pavé dial. The applied hour markers carry polished white gold tone surrounds that frame the diamond accents. The dial keeps the accurate 116769TBR marker spacing and text layout while the pavé simulated diamond field fills the surface.
The Rolex GMT-Master II 116769TBR super clone runs on a Swiss-grade automatic GMT movement engineered to reproduce the genuine Rolex Caliber 3186 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 48-hour power reserve for a full day off the wrist. The caliber drives the independent 24-hour GMT hand and a quickset date.
The local hour hand jumps in one-hour steps without stopping the seconds hand, so the wearer resets the time when crossing a time zone. The independent 24-hour GMT hand tracks home time for the second zone reading. Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 3186, and the smooth sweeping seconds hand confirms the Swiss-grade build of this 116769TBR Super Clone.
Spec grid:
The GMT-Master II 116769TBR super clone carries the three-piece-link Oyster bracelet in a matching white gold tone, one of the two bracelets Rolex pairs with the GMT-Master II. The bracelet finish runs continuous from the diamond-set lugs to the clasp for a single-tone iced look. The folding Oysterlock safety clasp closes with a firm click and holds the bracelet secure on the wrist, and the GMT-Master II never uses a President bracelet.
The watch weighs approximately 155 grams on the full bracelet, giving the solid wrist presence buyers expect from a precious-metal GMT-Master II. The Easylink comfort extension inside the clasp adds about 5mm of length for quick fit changes through the day. The 40mm case and tapered Oyster bracelet sit comfortably on wrists from 6.5 to 8 inches.
The Rolex GMT-Master II 116769TBR super clone carries a 40mm Oyster case in a white gold tone, with simulated diamonds set across the case sides and the lugs for a fully iced finish. The case core uses a precision-machined alloy plated to a bright white gold color that holds its tone over years of wear. The Triplock screw-down crown at 3 o'clock seals the case and supports water resistance to 100 meters. The diamond-set lugs carry hand-placed simulated stones in even rows that catch light from every angle.
The diamond-set bezel rings the dial with high-grade simulated diamonds in place of the engraved 24-hour scale found on steel GMT-Master II models. The stones sit in a continuous claw setting that holds each diamond secure while keeping the metal between stones minimal for maximum brilliance. The bezel on this 116769TBR Super Clone is fixed, matching the genuine diamond-bezel GMT-Master II, where the gem-set ring replaces the rotating 24-hour insert.
Scratch-resistant sapphire crystal with anti-reflective treatment covers the pavé dial and keeps the GMT readings clear in direct light. A Cyclops lens magnifies the date at 3 o'clock for quick reading. The solid screw-down caseback in white gold tone seals the Caliber 3186 clone movement and holds water resistance to 100 meters, giving the full diamond GMT-Master II Super Clone a clean, sealed profile.
The pavé dial of this GMT-Master II 116769TBR super clone is set edge to edge with high-grade simulated diamonds, so the full face reads as a continuous sheet of brilliance. The dial holds a date window at 3 o'clock under the Cyclops lens, framed to match the genuine 116769TBR layout. The pavé setting places small simulated stones tight against one another for an even sparkle across the dial.
The dial places a 24-hour GMT hand that tracks the second time zone for the wearer. The applied hour markers carry simulated diamond accents that sit against the pavé surface, and the hour and minute hands carry luminous fill for low-light reading. The central seconds hand and the minute hand sweep the full dial, and the GMT hand tracks home time independently of the local hour hand.
The applied Rolex coronet sits at 12 o'clock with "Rolex Oyster Perpetual Date GMT-Master II" printed in crisp text across the pavé dial. The applied hour markers carry polished white gold tone surrounds that frame the diamond accents. The dial keeps the accurate 116769TBR marker spacing and text layout while the pavé simulated diamond field fills the surface.
The Rolex GMT-Master II 116769TBR super clone runs on a Swiss-grade automatic GMT movement engineered to reproduce the genuine Rolex Caliber 3186 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 48-hour power reserve for a full day off the wrist. The caliber drives the independent 24-hour GMT hand and a quickset date.
The local hour hand jumps in one-hour steps without stopping the seconds hand, so the wearer resets the time when crossing a time zone. The independent 24-hour GMT hand tracks home time for the second zone reading. Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 3186, and the smooth sweeping seconds hand confirms the Swiss-grade build of this 116769TBR Super Clone.
Spec grid:
The GMT-Master II 116769TBR super clone carries the three-piece-link Oyster bracelet in a matching white gold tone, one of the two bracelets Rolex pairs with the GMT-Master II. The bracelet finish runs continuous from the diamond-set lugs to the clasp for a single-tone iced look. The folding Oysterlock safety clasp closes with a firm click and holds the bracelet secure on the wrist, and the GMT-Master II never uses a President bracelet.
The watch weighs approximately 155 grams on the full bracelet, giving the solid wrist presence buyers expect from a precious-metal GMT-Master II. The Easylink comfort extension inside the clasp adds about 5mm of length for quick fit changes through the day. The 40mm case and tapered Oyster bracelet sit comfortably on wrists from 6.5 to 8 inches.
The GMT-Master II offers three routes for a buyer choosing between a precious-metal statement and a steel tool watch, and the 116769TBR Full Diamond holds the fully iced tier. The comparison of the three variants is listed below.
| Variant | Case Finish | Bezel | Super Clone Price |
|---|---|---|---|
| 116769TBR Full Diamond (this build) | White gold tone, diamond-set case and lugs | Diamond-set, simulated stones | $1,699 |
| 116719BLRO white gold | White gold tone, polished | Blue-and-red Pepsi Cerachrom | $1,599 |
| 126710BLRO steel | Polished and brushed steel | Blue-and-red Pepsi Cerachrom | $1,399 |
Buyers select the 116769TBR Full Diamond for the maximum-statement iced-out GMT-Master II, where simulated diamonds cover the case, lugs, bezel, and dial. The 116719BLRO buyer prefers a white gold GMT-Master II with the classic Pepsi ceramic bezel and a clean dial. The 126710BLRO buyer chooses the steel tool-watch finish at the lowest price of the three. The 116769TBR Full Diamond Super Clone gives the strongest luxury statement in the GMT-Master II line.
The Rolex GMT-Master launched in 1955 as a dual-time watch built for Pan American World Airways pilots who crossed multiple time zones on long-haul routes. The original model paired a rotating 24-hour bezel with a GMT hand to show a second time zone at a glance. Rolex introduced the GMT-Master II in 1982, which added an independently adjustable local hour hand for quicker time-zone changes. The reference 116769TBR sits in the 116xxx generation, which uses Caliber 3186 with a 48-hour power reserve and runs at 28,800 vibrations per hour. The 116769TBR is the fully gem-set interpretation of the model, where Rolex sets the white gold case, lugs, bezel, and dial with diamonds, turning the travel watch into a high-jewelry piece. This 116769TBR Super Clone follows that fully iced configuration, pairing the proven GMT-Master II dual-time layout with high-grade simulated diamonds in place of the mined stones used on the genuine reference.
Every Rolex GMT-Master II 116769TBR super clone passes a four-stage quality control sequence before shipping. The QC steps are listed below.
The 116769TBR Super Clone ships in secure, discreet packaging to protect your privacy. The full package contents are listed below.
The Rolex GMT-Master II 116769TBR super clone ships within 24 hours of order confirmation via DHL Express or FedEx Priority with full insurance and discreet packaging. Worldwide delivery lands in 5 to 10 business days across the USA, UK, UAE, India, and Europe. Every watch carries a 1-year limited warranty covering movement defects, with replacement-parts support and servicing guidance provided after purchase. The support channels for the 116769TBR Super Clone are listed below.
Real owners of the Rolex GMT-Master II 116769TBR full diamond super clone share the wrist-side verdict. Ratings average 4.9 / 5 across 134 verified orders.
"I wanted a fully iced GMT and this one delivers. The pavé dial is set tight with no gaps, and the bezel stones line up in clean rows. The simulated diamonds throw real brilliance under light, and at $1,699 it looks like a six-figure watch on the wrist."
"The local hour hand jumps cleanly in one-hour steps and the date quickset is crisp. The GMT hand tracks home time without drifting. Shipped FedEx and reached London in 6 days in discreet packaging."
"I was unsure about spending this much on my first clone. WhatsApp support answered every question about the simulated diamond setting before I ordered. The watch arrived in a full box set, and the white gold tone matches the dial and bracelet perfectly."
Yes, the Rolex GMT-Master II 116769TBR full diamond sold on Super Clone Watches is a 1:1 super clone that follows the genuine 116769TBR reference at 98% visual and dimensional accuracy. The build matches the 40mm case proportions, the diamond-set bezel and lugs, the pavé dial, and the GMT hand layout within tight tolerance. The price of $1,699 compares to a genuine 116769TBR that trades well into six figures, near $145,000 at retail.
No, the diamonds on this GMT-Master II 116769TBR super clone are not mined diamonds, and they are high-grade simulated stones. Each stone is a lab-formed diamond simulant cut and polished for strong brilliance and clarity, then hand-set in the case, lugs, bezel, and pavé dial. The simulated stones give the fully iced look of the genuine 116769TBR at a fraction of the cost, while a genuine 116769TBR uses mined diamonds and trades into six figures.
A Swiss-grade automatic clone of Rolex Caliber 3186 powers this GMT-Master II 116769TBR super clone. The movement runs at 28,800 vibrations per hour, holds a 48-hour power reserve, and drives the independent 24-hour GMT hand and the quickset date. Performance matches the genuine caliber on frequency and autonomy, with a smooth sweeping seconds hand and a quiet winding rotor.
The GMT function on the 116769TBR super clone works through two hands that show two time zones at once. The local hour hand jumps in one-hour steps for the current zone, and the independent 24-hour GMT hand tracks home time. The wearer sets the GMT hand to home time, then adjusts the local hour hand when crossing into a new time zone.
The diamond bezel on this 116769TBR super clone is a fixed ring set with high-grade simulated diamonds in place of the engraved 24-hour scale used on steel GMT-Master II models. The simulated stones sit in a continuous claw setting that keeps each diamond secure with minimal metal between stones. The gem-set bezel matches the genuine diamond-bezel 116769TBR layout, where the diamond ring replaces the rotating 24-hour insert.
Yes, the GMT-Master II 116769TBR super clone has a date window at 3 o'clock. The pavé diamond dial carries the date aperture under a Cyclops lens that magnifies the number for quick reading. The Caliber 3186 clone movement drives a quickset date, so the wearer adjusts the date through the crown without moving the hour and minute hands.
The Rolex GMT-Master II 116769TBR full diamond super clone ships via DHL Express or FedEx Priority with full insurance and tracked, signature-required delivery. The watch travels in secure, discreet packaging to protect your privacy. Transit time runs 5 to 10 business days to the USA, UK, UAE, India, and Europe, and the shipping cost is included in the price.
A 1-year limited warranty covers movement defects and manufacturing faults on this GMT-Master II 116769TBR full diamond super clone. Replacement parts sourcing runs through the originating factory via Super Clone Watches support. Movement servicing guidance is provided through WhatsApp and email for the lifetime of the watch.
