| Reference | 116710LN |
|---|---|
| Case | 40mm × 12.5mm, DLC-PVD blackout-coated steel |
| Dial | Black with date at 3 o'clock |
The GMT-Master II 116710LN is the steel dual-time Rolex produced from about 2007 to 2019, and this super clone presents it in the Blaken blackout style with a DLC-PVD-coated case, bezel, and bracelet over a black dial. This Blaken GMT-Master II Super Clone follows the 116710LN reference with an all-black Cerachrom 24-hour bezel, an independent 24-hour GMT hand, and a date at 3 o'clock for $1,449. Every proportion, hand length, and bracelet link follows the genuine reference within tight production tolerance.
The Rolex GMT-Master II 116710 Blaken super clone carries a 40mm Oyster case measuring 12.5mm thick, built on a 904L stainless steel core and finished with a hard DLC-PVD black coating across every surface. DLC-PVD stands for diamond-like carbon applied through physical vapour deposition, and the coating gives the steel a deep matte-to-satin black tone while adding strong scratch resistance for daily wear. The Triplock screw-down crown sits at 3 o'clock and seals the case against water entry.
The rotating bezel rings the dial with an all-black Cerachrom 24-hour scale, and this super clone reproduces the genuine 116710LN ceramic bezel with the DLC-PVD coating carried over the bezel edge. Cerachrom is the hard ceramic Rolex uses for scratch and fade resistance, and the 24-hour graduation lets the wearer read a second time zone against the GMT hand. The bidirectional bezel turns through 120 clicks and aligns precisely on this 116710 Super Clone.
Scratch-resistant sapphire crystal with anti-reflective treatment covers the black dial for clear reading at any angle. A Cyclops lens sits over the date at 3 o'clock and magnifies the date for fast reading, matching the genuine 116710LN layout. The solid screw-down caseback seals the Caliber 3186 clone movement and holds water resistance to 100 meters, with the DLC-PVD coating wrapping the caseback for a consistent black finish.
The black dial of this GMT-Master II 116710 Blaken super clone carries a deep, even black that sits flush with the DLC-PVD-coated case for a single-tone look. The dial holds a date aperture at 3 o'clock under the Cyclops lens and keeps the clean, balanced layout that defines the 116710LN reference.
The 116710LN dial carries an independent 24-hour GMT hand that points to the Cerachrom bezel to show a second time zone. The wearer sets the GMT hand and the rotating bezel together to track a third zone if needed. Applied hour markers and Mercedes-style hands carry luminous fill for night legibility against the black surface, and the GMT hand keeps its accent tip for quick zone reading.
The applied Rolex coronet sits at 12 o'clock with "Rolex Oyster Perpetual Date GMT-Master II" printed in crisp, fine text across the black dial. The minute track frames the dial edge with even spacing, and the date window aligns squarely within the aperture. The black dial against the DLC-PVD-coated case gives the 116710LN the uniform, stealth appearance the Blaken treatment is known for.
The Rolex GMT-Master II 116710 Blaken super clone runs on a Swiss-grade automatic movement engineered to reproduce the genuine Rolex Caliber 3186 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 48-hour power reserve for two days off the wrist. The Caliber 3186 drives the independent 24-hour GMT hand and the quickset date alongside the central time display.
The local hour hand jumps in one-hour steps without stopping the seconds, so the wearer adjusts time zones quickly during travel. Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 3186. The smooth sweeping seconds hand and the quiet winding rotor confirm the Swiss-grade build of this 116710 Super Clone.
Spec grid:
The GMT-Master II 116710 Blaken super clone carries the three-piece-link Oyster bracelet, the bracelet Rolex pairs with the steel GMT-Master II. The bracelet wears the same DLC-PVD blackout coating as the case and bezel, so the finish runs unbroken from the lugs to the clasp. The folding Oysterlock safety clasp closes with a firm click and holds the bracelet secure on the wrist, and the GMT-Master II never uses a President bracelet.
The watch weighs approximately 150 grams on the full bracelet, giving the solid wrist presence buyers expect from a steel GMT-Master II. The Easylink comfort extension inside the clasp adds about 5mm of length for quick fit adjustment through the day. The 40mm case and tapered Oyster bracelet sit comfortably on wrists from 6.5 to 8 inches.
The Rolex GMT-Master II 116710 Blaken super clone carries a 40mm Oyster case measuring 12.5mm thick, built on a 904L stainless steel core and finished with a hard DLC-PVD black coating across every surface. DLC-PVD stands for diamond-like carbon applied through physical vapour deposition, and the coating gives the steel a deep matte-to-satin black tone while adding strong scratch resistance for daily wear. The Triplock screw-down crown sits at 3 o'clock and seals the case against water entry.
The rotating bezel rings the dial with an all-black Cerachrom 24-hour scale, and this super clone reproduces the genuine 116710LN ceramic bezel with the DLC-PVD coating carried over the bezel edge. Cerachrom is the hard ceramic Rolex uses for scratch and fade resistance, and the 24-hour graduation lets the wearer read a second time zone against the GMT hand. The bidirectional bezel turns through 120 clicks and aligns precisely on this 116710 Super Clone.
Scratch-resistant sapphire crystal with anti-reflective treatment covers the black dial for clear reading at any angle. A Cyclops lens sits over the date at 3 o'clock and magnifies the date for fast reading, matching the genuine 116710LN layout. The solid screw-down caseback seals the Caliber 3186 clone movement and holds water resistance to 100 meters, with the DLC-PVD coating wrapping the caseback for a consistent black finish.
The black dial of this GMT-Master II 116710 Blaken super clone carries a deep, even black that sits flush with the DLC-PVD-coated case for a single-tone look. The dial holds a date aperture at 3 o'clock under the Cyclops lens and keeps the clean, balanced layout that defines the 116710LN reference.
The 116710LN dial carries an independent 24-hour GMT hand that points to the Cerachrom bezel to show a second time zone. The wearer sets the GMT hand and the rotating bezel together to track a third zone if needed. Applied hour markers and Mercedes-style hands carry luminous fill for night legibility against the black surface, and the GMT hand keeps its accent tip for quick zone reading.
The applied Rolex coronet sits at 12 o'clock with "Rolex Oyster Perpetual Date GMT-Master II" printed in crisp, fine text across the black dial. The minute track frames the dial edge with even spacing, and the date window aligns squarely within the aperture. The black dial against the DLC-PVD-coated case gives the 116710LN the uniform, stealth appearance the Blaken treatment is known for.
The Rolex GMT-Master II 116710 Blaken super clone runs on a Swiss-grade automatic movement engineered to reproduce the genuine Rolex Caliber 3186 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 48-hour power reserve for two days off the wrist. The Caliber 3186 drives the independent 24-hour GMT hand and the quickset date alongside the central time display.
The local hour hand jumps in one-hour steps without stopping the seconds, so the wearer adjusts time zones quickly during travel. Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 3186. The smooth sweeping seconds hand and the quiet winding rotor confirm the Swiss-grade build of this 116710 Super Clone.
Spec grid:
The GMT-Master II 116710 Blaken super clone carries the three-piece-link Oyster bracelet, the bracelet Rolex pairs with the steel GMT-Master II. The bracelet wears the same DLC-PVD blackout coating as the case and bezel, so the finish runs unbroken from the lugs to the clasp. The folding Oysterlock safety clasp closes with a firm click and holds the bracelet secure on the wrist, and the GMT-Master II never uses a President bracelet.
The watch weighs approximately 150 grams on the full bracelet, giving the solid wrist presence buyers expect from a steel GMT-Master II. The Easylink comfort extension inside the clasp adds about 5mm of length for quick fit adjustment through the day. The 40mm case and tapered Oyster bracelet sit comfortably on wrists from 6.5 to 8 inches.
The GMT-Master II offers three routes for a steel-cased buyer, and the 116710 Blaken holds the custom blackout tier. The comparison of the three variants is listed below.
| Variant | Finish | Movement | Super Clone Price |
|---|---|---|---|
| 116710 Blaken (this build) | Full DLC-PVD blackout coating | Caliber 3186 clone | $1,449 |
| 116710LN standard steel | Polished and brushed steel | Caliber 3186 clone | $1,399 |
| 126710 | Polished and brushed steel | Caliber 3285 clone | $1,499 |
Buyers select the 116710 Blaken for the stealth, single-tone look that the DLC-PVD coating gives a classic travel watch. Standard 116710LN buyers prefer the original steel GMT-Master II in its factory finish. The 126710 buyer chooses the current generation with the Caliber 3285 and its longer 70-hour power reserve. The 116710 Blaken Super Clone gives the strongest modern, blacked-out statement of the three.
The Rolex GMT-Master launched in 1955 as a dual-time watch built for Pan American World Airways pilots who needed to read two time zones on long-haul flights. Rolex added the GMT-Master II in 1982 with an independently adjustable local hour hand, which let the wearer change time zones without stopping the watch. Reference 116710LN arrived in 2007 as the first GMT-Master II with an all-black Cerachrom ceramic bezel, replacing the earlier aluminium insert, and Rolex produced it with Caliber 3186 until about 2019. Blaken is an independent customizer that applies a hard DLC-PVD all-black coating to Rolex watches, turning a standard steel GMT-Master II into a fully blacked-out timepiece. This 116710 Super Clone follows that Blaken custom interpretation, pairing the proven 116710LN dual-time layout with a complete DLC-PVD blackout finish.
Every Rolex GMT-Master II 116710 Blaken super clone passes a four-stage quality control sequence before shipping. The QC steps are listed below.
The 116710 Super Clone ships in secure, discreet packaging to protect your privacy. The full package contents are listed below.
The Rolex GMT-Master II 116710 Blaken super clone ships within 24 hours of order confirmation via DHL Express or FedEx Priority with full insurance and discreet packaging. Worldwide delivery lands in 5 to 10 business days across the USA, UK, UAE, India, and Europe. Every watch carries a 1-year limited warranty covering movement defects, with replacement-parts support and servicing guidance provided after purchase. The support channels for the 116710 Super Clone are listed below.
Real owners of the Rolex GMT-Master II 116710 Blaken super clone share the wrist-side verdict. Ratings average 4.9 / 5 across 158 verified orders.
"I wanted a stealth GMT, and the coating on this one is consistent across the case, bezel, and bracelet. There are no light patches or thin spots. The black dial blends right into the case. At $1,449 it looks like a serious custom build."
"The local hour hand jumps in clean one-hour steps and the date snaps over without dragging the seconds. The bezel turns with a tight 120-click action. Shipped FedEx and reached London in 6 days in discreet packaging."
"I was unsure about spending this much on my first clone. WhatsApp support answered every question before I ordered. The watch arrived in a full box set, and the GMT hand lines up exactly where it should against the 24-hour bezel."
Yes, the Rolex GMT-Master II 116710 Blaken sold on Super Clone Watches is a 1:1 super clone that follows the genuine 116710LN reference at 98% visual and dimensional accuracy. The build matches the 40mm case proportions, the all-black Cerachrom 24-hour bezel, and the dual-time layout within tight tolerance, then adds the Blaken-style DLC-PVD blackout coating. The price of $1,449 compares to a genuine 116710LN with a custom blackout treatment that runs well above $25,000.
The DLC-PVD blackout coating is a hard black finish that an independent customizer applies to Rolex watches. DLC-PVD stands for diamond-like carbon applied through physical vapour deposition, and Blaken uses it to coat the case, bezel, and bracelet of a standard steel GMT-Master II in a deep, even black. This super clone reproduces that custom look with a hard DLC-PVD coating over a 904L stainless steel core, so the watch shows the same single-tone blackout appearance and scratch resistance as a Blaken-customized 116710LN.
A Swiss-grade automatic clone of Rolex Caliber 3186 powers this GMT-Master II 116710 super clone. The movement runs at 28,800 vibrations per hour, holds a 48-hour power reserve, and drives the independent 24-hour GMT hand and the quickset date. Performance matches the genuine Caliber 3186 on frequency and autonomy, with a smooth sweeping seconds hand and a quiet winding rotor.
The GMT function on the 116710 super clone works through the independently adjustable local hour hand and the 24-hour GMT hand. The wearer sets the GMT hand to a home time zone, then jumps the local hour hand in one-hour steps to the current zone during travel. The rotating Cerachrom 24-hour bezel tracks a third time zone when the wearer turns it against the GMT hand.
The Cerachrom bezel is the all-black ceramic 24-hour bezel Rolex introduced on the genuine 116710LN in 2007. Cerachrom resists scratches and holds its color without fading from sunlight or wear. This super clone reproduces that ceramic bezel with the DLC-PVD coating carried over the edge, and the bidirectional bezel turns through 120 precise clicks for second-zone reading.
The genuine Rolex GMT-Master II 116710LN trades around $14,000 to $18,000 on the secondary market, and a Blaken custom DLC-PVD blackout build adds further cost on top of that figure, often pushing the total well above $25,000. This super clone sells for $1,449, which delivers 98% visual and functional parity at a small fraction of the genuine market price. Buyers receive the full blacked-out GMT-Master II wrist presence without the capital commitment.
The Rolex GMT-Master II 116710 Blaken super clone ships via DHL Express or FedEx Priority with full insurance and tracked, signature-required delivery. The watch travels in secure, discreet packaging to protect your privacy. Transit time runs 5 to 10 business days to the USA, UK, UAE, India, and Europe, and the shipping cost is included in the price.
A 1-year limited warranty covers movement defects and manufacturing faults on this GMT-Master II 116710 Blaken super clone. Replacement parts sourcing runs through the originating factory via Super Clone Watches support. Movement servicing guidance is provided through WhatsApp and email for the lifetime of the watch.
