| Reference | 126710BLRO |
|---|---|
| Case | 40mm × 12.0mm, blackout-coated steel |
| Dial | Black with date at 3 o'clock |
The GMT-Master II 126710BLRO is the current steel Rolex GMT-Master II, and this super clone presents it in the Blaken blackout style with a coated case and bracelet over a black dial. This Blaken GMT-Master II Super Clone keeps the blue-and-red Pepsi Cerachrom bezel, an independent 24-hour GMT hand, and a date window at 3 o'clock for $1,499. Every proportion, bezel insert color split, and bracelet link follows the genuine 126710BLRO reference within tight production tolerance.
The Rolex GMT-Master II 126710BLRO Blaken super clone carries a 40mm Oyster case measuring 12.0mm thick, built on a 904L stainless steel core and finished with a hard black coating across every surface. The blackout coating reproduces the Blaken DLC-style treatment, which gives the steel a deep matte-to-satin black tone and adds scratch resistance for daily wear. The Triplock screw-down crown at 3 o'clock seals the case and supports water resistance to 100 meters.
The blue-and-red Pepsi Cerachrom bezel rings the dial with a graduated 24-hour scale that reads the second time zone against the GMT hand. Cerachrom is the hard ceramic Rolex uses for scratch and fade resistance, and this super clone reproduces the clean blue-and-red color split with recessed numerals that hold their contrast over years of wear. The bezel rotates in both directions through 24 clicks, and the bright Pepsi color stays untouched by the blackout coating for the signature contrast against the dark case.
Scratch-resistant sapphire crystal with anti-reflective treatment covers the black dial and keeps the GMT readings clear in direct light. A Cyclops lens magnifies the date at 3 o'clock for quick reading. The solid screw-down caseback seals the Caliber 3285 clone movement and holds water resistance to 100 meters, and the blackout coating wraps the caseback for a consistent black finish from every angle.
The black dial of this GMT-Master II 126710BLRO Blaken super clone carries a deep, even black that sits flush with the blackout-coated case for a near single-tone look. The dial holds a date window at 3 o'clock under the Cyclops lens, framed to match the genuine 126710BLRO layout.
The dial places a green 24-hour GMT hand that points to the Pepsi bezel for the second time zone reading. The applied hour markers and the Mercedes hour hand carry Chromalight luminous fill for a long blue glow in low light. The central seconds hand and the minute hand sweep the full dial, and the GMT hand tracks the 24-hour bezel scale independently.
The applied Rolex coronet sits at 12 o'clock with "Rolex Oyster Perpetual Date GMT-Master II" printed in crisp text across the black dial. The applied hour markers carry polished surrounds that catch light against the dark surface. The dial keeps the accurate 126710BLRO marker spacing and text layout under the blackout treatment.
The Rolex GMT-Master II 126710BLRO Blaken super clone runs on a Swiss-grade automatic GMT movement engineered to reproduce the genuine Rolex Caliber 3285 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 70-hour power reserve for a full weekend off the wrist. The caliber drives the independent 24-hour GMT hand and a quickset date.
The local hour hand jumps in one-hour steps without stopping the seconds hand, so the wearer resets the time when crossing a time zone. The independent 24-hour GMT hand tracks home time against the Pepsi bezel, and the rotating bezel adds a third time-zone reading. Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 3285, and the smooth sweeping seconds hand confirms the Swiss-grade build of this 126710BLRO Super Clone.
Spec grid:
The GMT-Master II 126710BLRO Blaken super clone carries the three-piece-link Oyster bracelet, one of the two bracelets Rolex pairs with the GMT-Master II. The bracelet wears the same blackout coating as the case, so the finish runs unbroken from the lugs to the clasp. The folding Oysterlock safety clasp closes with a firm click and holds the bracelet secure on the wrist, and the GMT-Master II never uses a President bracelet.
The watch weighs approximately 145 grams on the full bracelet, giving the solid wrist presence buyers expect from a steel GMT-Master II. The Easylink comfort extension inside the clasp adds about 5mm of length for quick fit changes through the day. The 40mm case and tapered Oyster bracelet sit comfortably on wrists from 6.5 to 8 inches.
The Rolex GMT-Master II 126710BLRO Blaken super clone carries a 40mm Oyster case measuring 12.0mm thick, built on a 904L stainless steel core and finished with a hard black coating across every surface. The blackout coating reproduces the Blaken DLC-style treatment, which gives the steel a deep matte-to-satin black tone and adds scratch resistance for daily wear. The Triplock screw-down crown at 3 o'clock seals the case and supports water resistance to 100 meters.
The blue-and-red Pepsi Cerachrom bezel rings the dial with a graduated 24-hour scale that reads the second time zone against the GMT hand. Cerachrom is the hard ceramic Rolex uses for scratch and fade resistance, and this super clone reproduces the clean blue-and-red color split with recessed numerals that hold their contrast over years of wear. The bezel rotates in both directions through 24 clicks, and the bright Pepsi color stays untouched by the blackout coating for the signature contrast against the dark case.
Scratch-resistant sapphire crystal with anti-reflective treatment covers the black dial and keeps the GMT readings clear in direct light. A Cyclops lens magnifies the date at 3 o'clock for quick reading. The solid screw-down caseback seals the Caliber 3285 clone movement and holds water resistance to 100 meters, and the blackout coating wraps the caseback for a consistent black finish from every angle.
The black dial of this GMT-Master II 126710BLRO Blaken super clone carries a deep, even black that sits flush with the blackout-coated case for a near single-tone look. The dial holds a date window at 3 o'clock under the Cyclops lens, framed to match the genuine 126710BLRO layout.
The dial places a green 24-hour GMT hand that points to the Pepsi bezel for the second time zone reading. The applied hour markers and the Mercedes hour hand carry Chromalight luminous fill for a long blue glow in low light. The central seconds hand and the minute hand sweep the full dial, and the GMT hand tracks the 24-hour bezel scale independently.
The applied Rolex coronet sits at 12 o'clock with "Rolex Oyster Perpetual Date GMT-Master II" printed in crisp text across the black dial. The applied hour markers carry polished surrounds that catch light against the dark surface. The dial keeps the accurate 126710BLRO marker spacing and text layout under the blackout treatment.
The Rolex GMT-Master II 126710BLRO Blaken super clone runs on a Swiss-grade automatic GMT movement engineered to reproduce the genuine Rolex Caliber 3285 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 70-hour power reserve for a full weekend off the wrist. The caliber drives the independent 24-hour GMT hand and a quickset date.
The local hour hand jumps in one-hour steps without stopping the seconds hand, so the wearer resets the time when crossing a time zone. The independent 24-hour GMT hand tracks home time against the Pepsi bezel, and the rotating bezel adds a third time-zone reading. Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 3285, and the smooth sweeping seconds hand confirms the Swiss-grade build of this 126710BLRO Super Clone.
Spec grid:
The GMT-Master II 126710BLRO Blaken super clone carries the three-piece-link Oyster bracelet, one of the two bracelets Rolex pairs with the GMT-Master II. The bracelet wears the same blackout coating as the case, so the finish runs unbroken from the lugs to the clasp. The folding Oysterlock safety clasp closes with a firm click and holds the bracelet secure on the wrist, and the GMT-Master II never uses a President bracelet.
The watch weighs approximately 145 grams on the full bracelet, giving the solid wrist presence buyers expect from a steel GMT-Master II. The Easylink comfort extension inside the clasp adds about 5mm of length for quick fit changes through the day. The 40mm case and tapered Oyster bracelet sit comfortably on wrists from 6.5 to 8 inches.
The GMT-Master II offers three routes for a steel-cased buyer, and the 126710BLRO Blaken holds the custom blackout tier. The comparison of the three variants is listed below.
| Variant | Finish | Bezel | Super Clone Price |
|---|---|---|---|
| 126710BLRO Blaken (this build) | Full blackout coating | Blue-and-red Pepsi | $1,499 |
| 126710BLRO standard steel | Polished and brushed steel | Blue-and-red Pepsi | $1,399 |
| 126710BLNR | Polished and brushed steel | Blue-and-black Batman | $1,399 |
Buyers select the 126710BLRO Blaken for the stealth, single-tone case paired with the bright Pepsi bezel, a contrast that stands apart from the standard steel finish. Standard 126710BLRO buyers prefer the original steel GMT-Master II in its factory finish. The 126710BLNR buyer chooses the blue-and-black Batman bezel for a darker, more subtle color split. The 126710BLRO Blaken Super Clone gives the strongest modern, blacked-out statement of the three.
The Rolex GMT-Master launched in 1955 as a dual-time watch built for Pan American World Airways pilots who crossed multiple time zones on long-haul routes. The original model paired a rotating 24-hour bezel with a GMT hand to show a second time zone at a glance. Rolex introduced the GMT-Master II in 1982, which added an independently adjustable local hour hand for quicker time-zone changes. The reference 126710BLRO arrived in 2018 with the blue-and-red Pepsi Cerachrom ceramic bezel and the modern Caliber 3285, which holds a 70-hour power reserve. Blaken is an independent customizer that applies a hard all-black coating to Rolex watches, turning a standard steel GMT-Master II into a fully blacked-out timepiece. This 126710BLRO Super Clone follows that Blaken custom interpretation, pairing the proven GMT-Master II layout and the Pepsi bezel with a complete blackout case finish.
Every Rolex GMT-Master II 126710BLRO Blaken super clone passes a four-stage quality control sequence before shipping. The QC steps are listed below.
The 126710BLRO Super Clone ships in secure, discreet packaging to protect your privacy. The full package contents are listed below.
The Rolex GMT-Master II 126710BLRO Blaken super clone ships within 24 hours of order confirmation via DHL Express or FedEx Priority with full insurance and discreet packaging. Worldwide delivery lands in 5 to 10 business days across the USA, UK, UAE, India, and Europe. Every watch carries a 1-year limited warranty covering movement defects, with replacement-parts support and servicing guidance provided after purchase. The support channels for the 126710BLRO Super Clone are listed below.
Real owners of the Rolex GMT-Master II 126710BLRO Blaken super clone share the wrist-side verdict. Ratings average 4.9 / 5 across 158 verified orders.
"I wanted a stealth GMT that still kept the Pepsi color, and this one nails it. The coating on the case and bracelet is even with no thin spots, and the blue-and-red bezel pops hard against the black. At $1,499 it looks like a serious custom build."
"The local hour hand jumps cleanly in one-hour steps and the date quickset is crisp. The GMT hand lines up with the 24-hour bezel as it should. Shipped FedEx and reached London in 6 days in discreet packaging."
"I was unsure about spending this much on my first clone. WhatsApp support answered every question about the blackout finish before I ordered. The watch arrived in a full box set, and the Pepsi bezel color split is exactly where it should sit."
Yes, the Rolex GMT-Master II 126710BLRO Blaken sold on Super Clone Watches is a 1:1 super clone that follows the genuine 126710BLRO reference at 98% visual and dimensional accuracy. The build matches the 40mm case proportions, the blue-and-red Pepsi Cerachrom bezel, and the GMT hand layout within tight tolerance, then adds the Blaken-style blackout coating. The price of $1,499 compares to a genuine 126710BLRO that trades near $19,000 before any custom blackout treatment.
The Blaken blackout treatment is a hard all-black coating that an independent customizer applies to Rolex watches. Blaken takes a standard steel GMT-Master II and coats the case and bracelet in a deep black DLC-style finish while keeping the bezel color. This super clone reproduces that custom look with a hard black coating over a 904L stainless steel core, paired with the bright blue-and-red Pepsi bezel for the same single-tone case contrast as a Blaken-customized 126710BLRO.
A Swiss-grade automatic clone of Rolex Caliber 3285 powers this GMT-Master II 126710BLRO super clone. The movement runs at 28,800 vibrations per hour, holds a 70-hour power reserve, and drives the independent 24-hour GMT hand and the quickset date. Performance matches the genuine caliber on frequency and autonomy, with a smooth sweeping seconds hand and a quiet winding rotor.
The GMT function on the 126710BLRO super clone works through three elements that show more than one time zone. The local hour hand jumps in one-hour steps for the current zone, the independent 24-hour GMT hand tracks home time, and the rotating Pepsi bezel reads a third zone against that GMT hand. The wearer sets the GMT hand to home time, then adjusts the local hour hand when crossing into a new time zone.
The Pepsi bezel is the blue-and-red 24-hour Cerachrom ceramic bezel that Rolex fits to the 126710BLRO. The blue half marks daytime hours and the red half marks nighttime hours, which helps the wearer read the GMT hand at a glance. This super clone reproduces the blue-and-red Cerachrom color split with recessed numerals, and the blackout coating leaves the bright bezel untouched for the signature contrast.
Yes, the GMT-Master II 126710BLRO super clone has a date window at 3 o'clock. The black dial carries the date aperture under a Cyclops lens that magnifies the number for quick reading. The Caliber 3285 clone movement drives a quickset date, so the wearer adjusts the date through the crown without moving the hour and minute hands.
The Rolex GMT-Master II 126710BLRO Blaken super clone ships via DHL Express or FedEx Priority with full insurance and tracked, signature-required delivery. The watch travels in secure, discreet packaging to protect your privacy. Transit time runs 5 to 10 business days to the USA, UK, UAE, India, and Europe, and the shipping cost is included in the price.
A 1-year limited warranty covers movement defects and manufacturing faults on this GMT-Master II 126710BLRO Blaken super clone. Replacement parts sourcing runs through the originating factory via Super Clone Watches support. Movement servicing guidance is provided through WhatsApp and email for the lifetime of the watch.
