| Reference | 114200 |
|---|---|
| Case | 34mm × 12mm, 904L stainless steel |
| Dial | Glossy black with luminous applied indexes |
The Rolex Oyster Perpetual 114200 is the 34mm reference Rolex produced from 2007 through 2020, sitting in the brand's entry tier of unisex and ladies-favored sport-dress watches. This super clone covers the 114200 in glossy black dial with luminous indexes, smooth domed bezel, and 3-link Oyster bracelet for $1,299. The four panels below cover case build, dial detail, movement architecture, and bracelet wearability.
The Rolex Oyster Perpetual 114200 super clone carries a 34mm 904L stainless steel case measuring 12mm thick and 42mm lug-to-lug, machined on 5-axis CNC to match the genuine reference dimensions within a 0.05mm tolerance. The 114200 sits in Rolex's transition era when the brand moved its full Oyster line to 904L steel for higher corrosion resistance and a colder, brighter polish than 316L delivers. The case finishing alternates satin brushing on the top of the lugs with high-polish on the case flanks, holding the light contrast that defines the Oyster Perpetual silhouette.
The smooth domed bezel on this Rolex Oyster Perpetual 114200 super clone uses polished 904L steel with no gripping notches, presenting the dial with a clean visual frame. A scratch-resistant sapphire crystal sits flush over the dial, treated with an anti-reflective wash for low-glare reading in daylight. The combined bezel-and-crystal geometry runs at 6.5mm above the caseback, giving the 114200 its characteristic low-profile wrist sit.
The Rolex Oyster Perpetual 114200 super clone uses a Twinlock screw-down crown with the engraved Rolex coronet, sealed against the case with double gaskets. The crown threads tight against the case in 4 turns. Combined with the screwed-in caseback, the watch holds 100 meters (330 feet) of water resistance for swimming, snorkeling, and full daily wear. The caseback is solid steel, brushed flat with no engraving, true to the genuine 114200 closed-back style.
The glossy black dial is the defining attribute of this Rolex Oyster Perpetual 114200 super clone, finished with a deep lacquer that catches light along the curved surface. Applied luminous indexes sit at the hour positions, each one faceted in white-gold-tone metal with Super-LumiNova fill for low-light reading. The 3, 6, and 9 positions carry rectangular stick markers, while the 12 position uses an inverted triangle to mark the dial top.
The Rolex Oyster Perpetual 114200 super clone uses the signature Rolex Mercedes hour hand, a baton minute hand, and a slim seconds sweep with the small circle lume dot. All three hands carry Super-LumiNova coating that matches the index lume tone. The seconds hand sweeps smoothly at 28,800 vibrations per hour, holding the slow-frame movement that distinguishes a Swiss-grade automatic from a quartz tick.
The applied Rolex coronet sits at 12 o'clock above the printed "ROLEX OYSTER PERPETUAL" text in white. The lower dial half includes the "SUPERLATIVE CHRONOMETER OFFICIALLY CERTIFIED" four-line text, printed in the same fine sans-serif used on the 2007 to 2020 production run of the 114200. The dial holds zero text crowding, true to Rolex's restrained dial grammar that buyers of the Oyster Perpetual line value most.
The Rolex Oyster Perpetual 114200 super clone runs on a Swiss-grade automatic clone movement engineered to mirror the genuine Rolex Caliber 3130 in size, frequency, and 48-hour autonomy. The movement winds bidirectionally through a free-sprung Glucydur-style balance and a Microstella regulator-equivalent system. The architecture follows Rolex's center-seconds layout with no calendar complication, holding the clean dial geometry buyers select the 114200 for.
Daily timekeeping deviation holds within minus 4 to plus 6 seconds per day after factory regulation, sitting close to the genuine Rolex chronometer specification of minus 2 to plus 2 seconds per day. The 48-hour power reserve covers a full weekend off the wrist without resetting. The smooth sweep at 4 Hz delivers the visual signature buyers of mechanical watches select against quartz alternatives.
The bridges receive Geneva striping in parallel waves. The mainplate carries perlage circular graining. The rotor displays a brushed radial finish with the red anodized accent the Rolex Caliber 3130 uses inside the genuine reference. The complete movement sits behind a solid steel screw-in caseback, hidden from view in keeping with the 114200's closed-back design.
Movement Specifications:
The Rolex Oyster Perpetual 114200 super clone ships on a 3-link Oyster bracelet in 904L stainless steel, sized at 19mm wide at the lugs and tapering to 14mm at the clasp. The bracelet uses brushed center and outer links with polished side facets, matching the late-2000s Rolex production specification. Solid end-links sit flush against the case with zero visible gap, holding the genuine 114200 fit and finish.
The Oysterclasp folding clasp closes with a polished steel cover stamped with the Rolex coronet. The clasp uses Rolex's Easylink 5mm comfort extension, which adds or removes 5mm of bracelet length on demand for hot-day swelling or seasonal wrist changes. The clasp action holds the smooth, low-profile click of the genuine reference.
The Rolex Oyster Perpetual 114200 super clone weighs approximately 110g on the full bracelet, matching the genuine 904L steel reference within a 5-gram margin. The 34mm case sits well on wrists from 5.5 inches through 7 inches, making the 114200 a documented choice for ladies and for men preferring the smaller Rolex silhouette. Lug-to-lug length runs 42mm, keeping the watch off the wrist bone on smaller frames.
The Rolex Oyster Perpetual 114200 super clone carries a 34mm 904L stainless steel case measuring 12mm thick and 42mm lug-to-lug, machined on 5-axis CNC to match the genuine reference dimensions within a 0.05mm tolerance. The 114200 sits in Rolex's transition era when the brand moved its full Oyster line to 904L steel for higher corrosion resistance and a colder, brighter polish than 316L delivers. The case finishing alternates satin brushing on the top of the lugs with high-polish on the case flanks, holding the light contrast that defines the Oyster Perpetual silhouette.
The smooth domed bezel on this Rolex Oyster Perpetual 114200 super clone uses polished 904L steel with no gripping notches, presenting the dial with a clean visual frame. A scratch-resistant sapphire crystal sits flush over the dial, treated with an anti-reflective wash for low-glare reading in daylight. The combined bezel-and-crystal geometry runs at 6.5mm above the caseback, giving the 114200 its characteristic low-profile wrist sit.
The Rolex Oyster Perpetual 114200 super clone uses a Twinlock screw-down crown with the engraved Rolex coronet, sealed against the case with double gaskets. The crown threads tight against the case in 4 turns. Combined with the screwed-in caseback, the watch holds 100 meters (330 feet) of water resistance for swimming, snorkeling, and full daily wear. The caseback is solid steel, brushed flat with no engraving, true to the genuine 114200 closed-back style.
The glossy black dial is the defining attribute of this Rolex Oyster Perpetual 114200 super clone, finished with a deep lacquer that catches light along the curved surface. Applied luminous indexes sit at the hour positions, each one faceted in white-gold-tone metal with Super-LumiNova fill for low-light reading. The 3, 6, and 9 positions carry rectangular stick markers, while the 12 position uses an inverted triangle to mark the dial top.
The Rolex Oyster Perpetual 114200 super clone uses the signature Rolex Mercedes hour hand, a baton minute hand, and a slim seconds sweep with the small circle lume dot. All three hands carry Super-LumiNova coating that matches the index lume tone. The seconds hand sweeps smoothly at 28,800 vibrations per hour, holding the slow-frame movement that distinguishes a Swiss-grade automatic from a quartz tick.
The applied Rolex coronet sits at 12 o'clock above the printed "ROLEX OYSTER PERPETUAL" text in white. The lower dial half includes the "SUPERLATIVE CHRONOMETER OFFICIALLY CERTIFIED" four-line text, printed in the same fine sans-serif used on the 2007 to 2020 production run of the 114200. The dial holds zero text crowding, true to Rolex's restrained dial grammar that buyers of the Oyster Perpetual line value most.
The Rolex Oyster Perpetual 114200 super clone runs on a Swiss-grade automatic clone movement engineered to mirror the genuine Rolex Caliber 3130 in size, frequency, and 48-hour autonomy. The movement winds bidirectionally through a free-sprung Glucydur-style balance and a Microstella regulator-equivalent system. The architecture follows Rolex's center-seconds layout with no calendar complication, holding the clean dial geometry buyers select the 114200 for.
Daily timekeeping deviation holds within minus 4 to plus 6 seconds per day after factory regulation, sitting close to the genuine Rolex chronometer specification of minus 2 to plus 2 seconds per day. The 48-hour power reserve covers a full weekend off the wrist without resetting. The smooth sweep at 4 Hz delivers the visual signature buyers of mechanical watches select against quartz alternatives.
The bridges receive Geneva striping in parallel waves. The mainplate carries perlage circular graining. The rotor displays a brushed radial finish with the red anodized accent the Rolex Caliber 3130 uses inside the genuine reference. The complete movement sits behind a solid steel screw-in caseback, hidden from view in keeping with the 114200's closed-back design.
Movement Specifications:
The Rolex Oyster Perpetual 114200 super clone ships on a 3-link Oyster bracelet in 904L stainless steel, sized at 19mm wide at the lugs and tapering to 14mm at the clasp. The bracelet uses brushed center and outer links with polished side facets, matching the late-2000s Rolex production specification. Solid end-links sit flush against the case with zero visible gap, holding the genuine 114200 fit and finish.
The Oysterclasp folding clasp closes with a polished steel cover stamped with the Rolex coronet. The clasp uses Rolex's Easylink 5mm comfort extension, which adds or removes 5mm of bracelet length on demand for hot-day swelling or seasonal wrist changes. The clasp action holds the smooth, low-profile click of the genuine reference.
The Rolex Oyster Perpetual 114200 super clone weighs approximately 110g on the full bracelet, matching the genuine 904L steel reference within a 5-gram margin. The 34mm case sits well on wrists from 5.5 inches through 7 inches, making the 114200 a documented choice for ladies and for men preferring the smaller Rolex silhouette. Lug-to-lug length runs 42mm, keeping the watch off the wrist bone on smaller frames.
The Rolex Oyster Perpetual 34mm family offers 3 main reference routes for buyers considering the 114200 tier. The comparison of these 3 references is listed below.
| Reference | Production Years | Case Size | Movement | Power Reserve | Super Clone Price |
|---|---|---|---|---|---|
| 114200 (this reference) | 2007 to 2020 | 34mm | Cal 3130 clone | 48 hours | $1,299 |
| 124200 | 2020 to present | 34mm | Cal 3230 clone | 70 hours | $1,499 |
| 114300 | 2015 to 2020 | 39mm | Cal 3132 clone | 48 hours | $1,399 |
Buyers select the 114200 over the 124200 successor for the warmer satin polish and the original-era 904L finish that Rolex produced before the 2020 design refresh. Buyers select the 114200 over the 114300 when the wrist target is below 6.5 inches, where the 34mm case sits without lug overhang. The 114200 with black dial holds its visual edge against pastel-dial alternatives by reading as a unisex daily-wear piece rather than a colored statement watch.
The Rolex Oyster Perpetual launched in 1931 when Rolex patented the Perpetual rotor automatic winding system inside the waterproof Oyster case Hans Wilsdorf introduced in 1926. The line carries the dual heritage of the first commercially viable waterproof watch case and the first reliable self-winding mechanism in the wider watch industry. The 114200 sits in the 2007 to 2020 production window, when Rolex standardized 904L stainless steel across the Oyster Perpetual line and updated the case profile with the heavier Oyster bracelet end-links. The 114200 black dial variant is the most-collected dial color of that production run, valued for its readability and its role as a typical first-Rolex purchase across the decade.
Every Rolex Oyster Perpetual 114200 super clone sourced through Super Clone Watches passes a 4-stage quality control sequence before shipping. The 4 QC steps are listed below.
The Rolex Oyster Perpetual 114200 super clone ships with the items listed below.
The Rolex Oyster Perpetual 114200 super clone ships within 24 hours of order confirmation via DHL Express or FedEx Priority, with full insurance and discreet packaging. Worldwide delivery lands in 5 to 10 business days across the USA, UK, UAE, India, and Europe. Every watch carries a 1-year limited warranty covering movement defects and manufacturing faults, with replacement parts support and servicing guidance provided through WhatsApp and email at sales@superclonewatches.com.
The 114200 super clone owner has access to the support channels listed below.
Owners of the Rolex Oyster Perpetual 114200 super clone share the wrist-side verdict after daily wear. Ratings average 4.9 out of 5 across 184 verified orders.
"My partner gave me his real Oyster Perpetual when he upgraded, and this super clone sits next to it in my watch box. The black lacquer holds the same depth in sunlight. Index lume glows clean overnight. The Mercedes hand sweep matches second-for-second under my loupe."
"I went back and forth on 34mm versus 36mm for months. The 114200 super clone arrived sized to my 6-inch wrist with 2 links removed and the Easylink half-extended. The lug overhang concern was zero. Wears like a $5,000 watch for under $1,300."
"DHL delivered to East London in 6 days with discreet packaging. No customs flag, no opening. The Rolex green presentation box was inside the travel sleeve as promised. WhatsApp support sent the tracking minute-by-minute. First super clone purchase and definitely not the last."
Yes, the Rolex Oyster Perpetual 114200 sold on Super Clone Watches is a 1:1 super clone reaching 98% visual and dimensional accuracy to the genuine Rolex reference. The partner factory uses 5-axis CNC machining to hold case dimensions within a 0.05mm tolerance against the original 34mm Oystersteel body. The price of $1,299 sits against a $5,000 to $8,000 pre-owned market range for the authentic 114200.
A Swiss-grade automatic clone of the Rolex Caliber 3130 powers this 114200 super clone. The clone movement runs at 28,800 vibrations per hour, holds 48 hours of power reserve, and uses 31 jewels in the same center-seconds architecture as the genuine reference. Daily accuracy holds within minus 4 to plus 6 seconds per day after factory regulation.
Yes, the case on this Rolex Oyster Perpetual 114200 super clone is machined from 904L stainless steel, the same grade Rolex uses on the genuine reference. The 904L alloy delivers higher corrosion resistance than standard 316L steel and holds a brighter, colder polish across the case flanks. The smooth domed bezel and screw-in caseback share the 904L specification.
The glossy black dial on this Rolex Oyster Perpetual 114200 super clone holds 98% visual accuracy against the genuine reference under 10x magnification. Applied luminous indexes, the Rolex coronet at 12, and the printed text follow the 2007 to 2020 production-era specification. The black lacquer depth matches the gloss profile that Oyster Perpetual buyers identify as the dial's signature.
The Rolex Oyster Perpetual 114200 super clone holds 100 meters (330 feet) of water resistance, matching the genuine reference rating. The Twinlock screw-down crown and screwed-in caseback seal the case for swimming, snorkeling, and daily-wear contact with water. Diving below 100 meters or operating the crown underwater sits outside the rated range.
Yes, the 34mm Rolex Oyster Perpetual 114200 super clone fits a ladies' wrist from 5.5 inches through 7 inches without lug overhang. The 42mm lug-to-lug length keeps the case body inside the wrist span of smaller frames. Rolex documents the 34mm Oyster Perpetual as a unisex daily watch, and the 114200 is a buyer's-favorite reference inside the ladies' Rolex segment.
The authentic Rolex Oyster Perpetual 114200 retailed near $5,000 when new and now trades between $5,000 and $8,000 on the secondary market depending on condition and dial color. This super clone of the 114200 sells for $1,299, delivering 98% visual and functional parity at roughly 20% of the secondary-market price. Buyers receive the full Rolex wrist presence without the capital commitment.
The Rolex Oyster Perpetual 114200 super clone ships via DHL Express or FedEx Priority with full insurance, discreet packaging, and tracked signature-required delivery. Transit time runs 5 to 10 business days across the USA, UK, UAE, India, and Europe. A 1-year limited warranty covers movement defects and manufacturing faults, with replacement parts support routed through the originating partner factory via WhatsApp and email at sales@superclonewatches.com.
