Rolex Air-King 114200 Super Clone : 34mm Stainless Steel White Dial Smooth Bezel

Case Profile and 34mm Wearability

The 114200 Super Clone carries a 34mm Oyster case measuring 11mm thick on a 904L stainless steel core with high-grade finishing. The 34mm diameter and 19mm lug width give the Air-King the classic mid-size profile that wears closer to a modern 36mm on the wrist. The case sits flat on wrist sizes from 6 inches to 7.5 inches without lug overhang, and the white dial reads cleanly against the polished case sides under daily light.

 Smooth Polished Bezel Geometry

The smooth polished bezel is the visual signature that separates the 114200 from the engine-turned 114210 sibling reference. The bezel sits as a clean polished ring of stainless steel framing the white dial, machined to the same width and curvature as the genuine Air-King 114200. The light skips across the polished surface without interruption, giving the white dial an uninterrupted frame that suits dress shirt cuffs and daily-wear styling alike.

 Sapphire Crystal, Caseback and Crown

A flat sapphire crystal sits over the white dial with anti-reflective treatment on the underside for clearer dial reading at angle. The screw-down caseback carries the Rolex coronet etching and seals the movement chamber against 100 meters of water pressure. The Twinlock-style screw-down crown holds the 10 ATM water resistance the genuine 114200 offers, with a Rolex coronet machined into the crown face.

White Dial Finish and Tonal Character

The white dial is the defining attribute of this 114200 Super Clone, finished by Clean Factory with the clean matte-to-glossy white tone that suits the post-2007 modernized Air-King aesthetic. The white finish reads cool and bright under daylight, shifts to a soft cream cast under warm tungsten light, and holds depth under 10x magnification without the chalky flat look most lower-tier clones show on a light dial. The white background gives every applied marker and printed line of text the highest possible contrast for at-a-glance reading.

 Applied Baton Hour Markers and Rolex Coronet

The dial carries applied white gold-tone baton hour markers with white luminous fill at every position, giving the white background a clean metallic contrast at every hour. The applied Rolex coronet sits at 12 o'clock above the printed "Rolex" wordmark, with "OYSTER PERPETUAL" and "AIR-KING" text below in glossy black print that reads cleanly against the white ground. The applied marker dimensions match the genuine reference within tight tolerance, with hand-polished facets that catch light the same way the original does.

Hands and Luminous Performance

The dial uses polished baton hands for hours and minutes and a slim sweeping seconds hand with a counterweight tail. The luminous compound on the hour and minute hands holds a green-cream daytime tone that glows blue-green for 4 to 5 hours after charging, set against the bright white backdrop for high contrast in low light. The no-date dial layout keeps the symmetry that collectors prize on the Air-King against the date-window Oyster Perpetual line.

 Swiss-Grade Automatic Clone Caliber

The Air-King 114200 Super Clone runs on a Swiss-grade automatic clone movement engineered to match the feel, frequency, and autonomy of the genuine Caliber 3130. The movement operates at 28,800 vibrations per hour, holds a 48-hour power reserve at full wind, and drives a smooth sweeping seconds hand without the stutter of lower-grade movements.

Accuracy and Quiet-Rotor Performance

Daily deviation holds within -10 to +15 seconds per day after factory regulation, in the same range Rolex specified for the genuine Caliber 3130 at production. The bidirectional rotor winds quietly against the wrist without the audible swing rotor rattle that signals a budget clone. The full balance bridge architecture gives the movement the shock resistance the genuine 3130 introduced as the upgrade over the earlier Caliber 3000.

Specification Grid:

Oyster 3-Link Bracelet

The White Dial 114200 Super Clone ships on an Oyster 3-link bracelet built in 904L stainless steel, tapering from 19mm at the lugs to 16mm at the clasp. The center link carries a polished finish framed by satin-brushed outer links, matching the bracelet construction Rolex used on the 114200 from 2007 onward. The end links sit flush against the case with no daylight gap.

Folding Oysterclasp and Wrist Comfort

The folding Oysterclasp closes with the standard fold-over double-blade security the genuine 114200 offers. The clasp tucks flat against the wrist underside without protrusion. The bracelet adjusts to wrist sizes from 6 inches to 7.75 inches through removable solid links, and the watch sits at a balanced 110-gram weight that matches the wrist feel of the genuine reference within a 5-gram margin.