| Reference | 116610LN-0001 |
|---|---|
| Case | 40mm × 12.5mm, Oystersteel |
| Dial | Black with black bezel |
The Submariner 116610LN is the previous-generation 40mm all-black version of the Rolex professional dive watch, built here with a black Cerachrom ceramic bezel and a black dial. This super clone follows the 116610LN-0001 reference with a 40mm Oystersteel case, a screw-down Triplock crown, and the three-link Oyster bracelet for $1,399. Every proportion, the bezel insert, and each bracelet link follow the genuine reference within tight production tolerance.
The Rolex Submariner 116610LN super clone carries a 40mm Oyster case measuring 12.5mm thick, built on a 904L stainless steel core for accurate weight and corrosion resistance. The case alternates mirror-polished and satin-brushed surfaces along the lugs and flanks, matching the finishing pattern of the genuine black-bezel Submariner. The 116610LN introduced the wider Maxi case with broad lugs and a thicker crown guard, and this super clone follows that case geometry. The screw-down Triplock crown at 3 o'clock seals the case for water resistance to 300 meters.
The unidirectional rotating bezel turns counter-clockwise only and carries a graduated 60-minute black Cerachrom ceramic insert for tracking elapsed dive time. The black Cerachrom insert resists scratching and fading, and the engraved numerals carry a platinum-coated finish for legibility against the black ceramic. This super clone follows the genuine 116610LN bezel action with a firm 120-click rotation that locks each minute marker into place.
Scratch-resistant sapphire crystal with anti-reflective coating covers the black dial and carries a Cyclops magnification lens over the date aperture at 3 o'clock. The Cyclops lens enlarges the date by 2.5 times for quick reading, a long-standing detail of the dated Submariner line. The solid screw-down caseback seals the Caliber 3135 clone movement and supports the 300-meter water resistance rating of the Submariner.
The black dial of this Submariner 116610LN super clone carries a deep glossy black lacquer surface that defines the all-black character of the reference. The "-0001" dial code identifies the standard black dial fitted to the steel 116610LN. The black dial pairs with the black Cerachrom bezel for a single-tone tool-watch identity, and the date aperture sits at 3 o'clock under the Cyclops lens, framed by a white border for contrast.
The Submariner 116610LN carries large applied hour markers and Mercedes-style hands filled with Chromalight luminous material for long-duration legibility underwater. The Chromalight fill glows blue in low light, which gives the diver a clear time reading through a multi-hour descent. The central hour, minute, and seconds hands follow the genuine reference in shape and proportion, and the markers match the size and placement of the authentic 116610LN.
The applied Rolex coronet sits at 12 o'clock, with "Rolex Oyster Perpetual Date Submariner 300m=1000ft" printed across the dial in fine white text. The wide gloss black dial, the broad applied markers, and the Maxi case give the 116610LN a high-contrast, instantly readable tool-watch face. The white-bordered date window and the printed minute track keep the dial balanced from 12 o'clock to 6 o'clock.
The Rolex Submariner 116610LN super clone runs on a Swiss-grade automatic movement engineered to match the genuine Rolex Caliber 3135 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a power reserve of approximately 48 hours for two days off the wrist. The caliber drives the central hours, minutes, seconds, and the quickset date at 3 o'clock.
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 3135. The smooth sweeping seconds hand and the quiet rotor confirm the Swiss-grade build. The 300-meter water resistance and the screw-down Triplock crown let the 116610LN super clone hold its seal through recreational diving and daily wear.
Spec grid:
The Submariner 116610LN super clone carries the Oyster bracelet, the three-piece-link design Rolex uses across its professional dive models. The bracelet uses an Oystersteel finish with brushed outer links and solid end links, tapering smoothly from the lugs toward the wrist. A folding Oysterlock safety clasp prevents accidental opening and closes flush against the wrist. The Submariner uses the Oyster bracelet and never a President bracelet.
The watch weighs approximately 155 grams on the full Oyster bracelet, giving the balanced wrist presence buyers expect from a steel Submariner. The Rolex Glidelock extension system inside the clasp adjusts the bracelet length in 2mm steps for a precise fit over a wetsuit or a bare wrist. The 40mm case and solid three-link bracelet sit comfortably on wrists from 6.5 to 8 inches.
The Rolex Submariner 116610LN super clone carries a 40mm Oyster case measuring 12.5mm thick, built on a 904L stainless steel core for accurate weight and corrosion resistance. The case alternates mirror-polished and satin-brushed surfaces along the lugs and flanks, matching the finishing pattern of the genuine black-bezel Submariner. The 116610LN introduced the wider Maxi case with broad lugs and a thicker crown guard, and this super clone follows that case geometry. The screw-down Triplock crown at 3 o'clock seals the case for water resistance to 300 meters.
The unidirectional rotating bezel turns counter-clockwise only and carries a graduated 60-minute black Cerachrom ceramic insert for tracking elapsed dive time. The black Cerachrom insert resists scratching and fading, and the engraved numerals carry a platinum-coated finish for legibility against the black ceramic. This super clone follows the genuine 116610LN bezel action with a firm 120-click rotation that locks each minute marker into place.
Scratch-resistant sapphire crystal with anti-reflective coating covers the black dial and carries a Cyclops magnification lens over the date aperture at 3 o'clock. The Cyclops lens enlarges the date by 2.5 times for quick reading, a long-standing detail of the dated Submariner line. The solid screw-down caseback seals the Caliber 3135 clone movement and supports the 300-meter water resistance rating of the Submariner.
The black dial of this Submariner 116610LN super clone carries a deep glossy black lacquer surface that defines the all-black character of the reference. The "-0001" dial code identifies the standard black dial fitted to the steel 116610LN. The black dial pairs with the black Cerachrom bezel for a single-tone tool-watch identity, and the date aperture sits at 3 o'clock under the Cyclops lens, framed by a white border for contrast.
The Submariner 116610LN carries large applied hour markers and Mercedes-style hands filled with Chromalight luminous material for long-duration legibility underwater. The Chromalight fill glows blue in low light, which gives the diver a clear time reading through a multi-hour descent. The central hour, minute, and seconds hands follow the genuine reference in shape and proportion, and the markers match the size and placement of the authentic 116610LN.
The applied Rolex coronet sits at 12 o'clock, with "Rolex Oyster Perpetual Date Submariner 300m=1000ft" printed across the dial in fine white text. The wide gloss black dial, the broad applied markers, and the Maxi case give the 116610LN a high-contrast, instantly readable tool-watch face. The white-bordered date window and the printed minute track keep the dial balanced from 12 o'clock to 6 o'clock.
The Rolex Submariner 116610LN super clone runs on a Swiss-grade automatic movement engineered to match the genuine Rolex Caliber 3135 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a power reserve of approximately 48 hours for two days off the wrist. The caliber drives the central hours, minutes, seconds, and the quickset date at 3 o'clock.
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 3135. The smooth sweeping seconds hand and the quiet rotor confirm the Swiss-grade build. The 300-meter water resistance and the screw-down Triplock crown let the 116610LN super clone hold its seal through recreational diving and daily wear.
Spec grid:
The Submariner 116610LN super clone carries the Oyster bracelet, the three-piece-link design Rolex uses across its professional dive models. The bracelet uses an Oystersteel finish with brushed outer links and solid end links, tapering smoothly from the lugs toward the wrist. A folding Oysterlock safety clasp prevents accidental opening and closes flush against the wrist. The Submariner uses the Oyster bracelet and never a President bracelet.
The watch weighs approximately 155 grams on the full Oyster bracelet, giving the balanced wrist presence buyers expect from a steel Submariner. The Rolex Glidelock extension system inside the clasp adjusts the bracelet length in 2mm steps for a precise fit over a wetsuit or a bare wrist. The 40mm case and solid three-link bracelet sit comfortably on wrists from 6.5 to 8 inches.
The Rolex Submariner line offers three black-configuration references across generation and date function, and the 116610LN holds the 40mm previous-generation black-bezel Submariner Date. The comparison of the three references is listed below.
| Variant | Case Size | Movement | Super Clone Price |
|---|---|---|---|
| Submariner 116610LN (this reference) | 40mm | Caliber 3135 | $1,399 |
| Submariner 126610LN | 41mm | Caliber 3235 | $1,399 |
| Submariner 114060 (No-Date) | 40mm | Caliber 3130 | $1,349 |
Buyers select the Submariner 116610LN for the 40mm Maxi case proportions and the proven Caliber 3135, the configuration that defined the Submariner Date for a full decade. Current-generation buyers prefer the 126610LN for the slightly larger 41mm case and the longer 70-hour Caliber 3235. The no-date 114060 buyer chooses the symmetrical dial without a date window. The Submariner 116610LN Super Clone gives the classic 40mm dive-watch profile that many collectors still consider the definitive modern Submariner.
The Rolex Submariner launched in 1953 as one of the first wristwatches built for recreational scuba diving with water resistance guaranteed to 100 meters. Rolex equipped the model with a unidirectional rotating bezel for timing a dive and a luminous dial for reading the time in dark water. The Submariner reached 300-meter water resistance through later references and became the reference point for the modern dive watch. Rolex introduced the Submariner Date with a black Cerachrom ceramic bezel in 2010 as reference 116610LN, which replaced the aluminum-bezel 16610 and added the wider Maxi case with a thicker crown guard and broad lugs. The 116610LN carried the Caliber 3135 movement and ran in production from 2010 to 2020. Rolex replaced it in 2020 with reference 126610LN, which moved the case to 41mm and adopted the Caliber 3235. The Submariner 116610LN Super Clone carries that decade-defining black-bezel design and the proven Submariner dive engineering onto the wrist.
Every Rolex Submariner 116610LN super clone passes a four-stage quality control sequence before shipping. The QC steps are listed below.
The Submariner 116610LN Super Clone ships in secure, discreet packaging to protect your privacy. The full package contents are listed below.
The Rolex Submariner 116610LN super clone ships within 24 hours of order confirmation via DHL Express or FedEx Priority with full insurance and discreet packaging. Worldwide delivery lands in 5 to 10 business days across the USA, UK, UAE, India, and Europe. Every watch carries a 1-year limited warranty covering movement defects, with replacement-parts support and servicing guidance provided after purchase. The support channels for the Submariner 116610LN Super Clone are listed below.
Real owners of the Rolex Submariner 116610LN super clone share the wrist-side verdict. Ratings average 4.9 / 5 across 211 verified orders.
"I wanted the previous-generation 116610LN over the newer 41mm, and this one nails it. The black Cerachrom bezel has the correct deep gloss and the black dial matches it cleanly. The Maxi case lugs are the right width. At $1,399 it reads like the genuine Submariner on the wrist."
"Shipped DHL and arrived in Leeds in 6 days. The packaging was discreet exactly as described. I have worn it swimming and in the shower for two months and the seal has held without any fogging. The 40mm case wears comfortably under a shirt cuff."
"I was nervous spending this much on my first clone. WhatsApp support answered every question about the Submariner before I ordered. The watch arrived in a full box set with papers. The Cyclops date lens and the tight 120-click bezel closed the deal for me."
Yes, the Rolex Submariner 116610LN sold on Super Clone Watches is a 1:1 super clone that matches the genuine Rolex reference at 98% visual and dimensional accuracy. The build matches the black Cerachrom ceramic bezel, the black dial, the Cyclops date lens, the screw-down Triplock crown, and the Oyster bracelet geometry within tight tolerance. The price of $1,399 compares to a genuine market figure near $10,500.
A Swiss-grade automatic clone of Rolex Caliber 3135 powers this Submariner 116610LN super clone. The movement runs at 28,800 vibrations per hour, holds a power reserve of approximately 48 hours, and drives the hours, minutes, seconds, and the date at 3 o'clock. Performance matches the genuine caliber on frequency and autonomy, with a smooth sweeping seconds hand and a quiet winding rotor.
The -0001 suffix is the Rolex dial code that identifies the standard black dial configuration of the 116610LN. Rolex assigns a dial-code suffix to each reference to mark the specific dial fitted at the factory, and -0001 designates the all-black gloss dial of the steel Submariner Date. This super clone follows the 116610LN-0001 specification with the correct black dial and printed text layout.
The Submariner 116610LN holds water resistance to 300 meters, which covers recreational scuba diving and all daily wear. The 40mm Oystersteel case, the screw-down Triplock crown, and the screw-down caseback seal the watch against pressure at depth. This super clone passes a water-resistance pressure test during quality control to confirm the seal before shipping.
The difference between the 116610LN and the 126610LN is the generation, the case size, and the movement. The Submariner 116610LN is the previous generation with a 40mm case and the Caliber 3135, produced from 2010 to 2020, while the 126610LN is the current generation with a 41mm case and the Caliber 3235. Both references share the black Cerachrom ceramic bezel, the black dial, and the 300-meter water resistance.
The authentic Rolex Submariner 116610LN trades near $10,500 on the pre-owned market as a discontinued previous-generation reference. This super clone sells for $1,399, which delivers 98% visual and functional parity at roughly 13% of the genuine market figure. Buyers receive the full 40mm steel Submariner wrist presence and all-black identity without the capital commitment.
The Rolex Submariner 116610LN super clone ships via DHL Express or FedEx Priority with full insurance and tracked, signature-required delivery. The watch travels in secure, discreet packaging to protect your privacy. Transit time runs 5 to 10 business days to the USA, UK, UAE, India, and Europe, and the shipping cost is included in the price.
A 1-year limited warranty covers movement defects and manufacturing faults on this Submariner 116610LN super clone. Replacement parts sourcing runs through the originating factory via Super Clone Watches support. Movement servicing guidance is provided through WhatsApp and email for the lifetime of the watch.
