| Reference | 116610LN (Blaken-style blackout custom) |
|---|---|
| Case | 40mm × 12.5mm, black DLC-coated steel |
| Dial | Black with applied markers |
The Submariner 116610LN Blaken Custom is the 40mm Rolex dive watch finished in an all-black coating, built here on the previous-generation 116610LN reference base. This super clone follows the 116610LN with a 40mm coated steel case, a black ceramic bezel, and a coated Oyster bracelet for $1,449. Every proportion, the screw-down crown, and each bracelet link follow the genuine reference within tight production tolerance, then carry the Blaken-style blackout treatment over the full watch.
The Rolex Submariner 116610LN super clone carries a 40mm Oyster case measuring 12.5mm thick, built on a 904L stainless steel core for accurate weight and corrosion resistance. The case receives a hard black DLC-style coating that covers the lugs, flanks, and bezel in a uniform matte-to-satin black finish, matching the Blaken blackout treatment. The screw-down Triplock crown at 3 o'clock seals the case for water resistance to 300 meters and carries the same black coating as the case body.
The unidirectional rotating bezel turns counter-clockwise only and carries a graduated 60-minute black ceramic insert for tracking elapsed dive time. The ceramic insert resists scratching and fading, and the coated bezel edge keeps the all-black profile consistent with the Blaken-style build. This super clone follows the genuine 116610LN bezel action with a firm 120-click rotation that locks each minute marker into place.
Scratch-resistant sapphire crystal with anti-reflective coating covers the black dial and carries a Cyclops magnification lens over the date aperture at 3 o'clock. The Cyclops lens enlarges the date for quick reading, a standard Submariner Date feature. The solid screw-down caseback carries the black coating, seals the Caliber 3135 clone movement, and supports the 300-meter water resistance rating of the Submariner.
The black dial of this Submariner 116610LN Blaken Custom carries a deep glossy black surface that anchors the all-black profile of the watch. The applied hour markers sit in raised relief against the black surface, and the date aperture sits at 3 o'clock under the Cyclops lens. The black dial pairs with the coated case and bezel to give the Blaken-style build a single uninterrupted black tone.
The Submariner 116610LN carries large applied hour markers and Mercedes-style hands filled with Chromalight luminous material for long-duration legibility underwater. The Chromalight fill glows blue in low light, which gives the diver a clear time reading through a multi-hour descent. The central hour, minute, and seconds hands follow the genuine reference in shape and proportion, and the markers match the size and placement of the authentic 116610LN.
The applied Rolex coronet sits at 12 o'clock, with "Rolex Oyster Perpetual Date Submariner 300m=1000ft" printed across the dial in fine white and green text. The depth rating line near 6 o'clock marks the 300-meter capability. The black dial, the black ceramic bezel, and the Blaken-style coating give the 116610LN a high-contrast tool-watch face with a fully blacked-out case.
The Rolex Submariner 116610LN super clone runs on a Swiss-grade automatic movement engineered to match the genuine Rolex Caliber 3135 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a power reserve of approximately 48 hours for two days off the wrist. The caliber drives the central hours, minutes, seconds, and the date at 3 o'clock.
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 3135. The smooth sweeping seconds hand and the quiet rotor confirm the Swiss-grade build. The 300-meter water resistance, the screw-down Triplock crown, and the coated screw-down caseback let the 116610LN Blaken Custom hold its seal through recreational and professional diving.
Spec grid:
The Submariner 116610LN Blaken Custom carries the Oyster bracelet, the three-piece-link design Rolex uses across its professional dive models. The bracelet receives the same black DLC-style coating as the case across every link, tapering smoothly from the lugs toward the wrist. A folding Oysterlock safety clasp prevents accidental opening and closes flush against the wrist. The Submariner uses the Oyster bracelet and never a President bracelet.
The watch weighs approximately 150 grams on the full coated Oyster bracelet, giving the solid wrist presence buyers expect from a steel Submariner. The Rolex Glidelock extension system inside the clasp adjusts the bracelet length in 2mm steps for a precise fit over a wetsuit or a bare wrist. The 40mm case and three-link bracelet sit comfortably on wrists from 6.5 to 8 inches.
The Rolex Submariner 116610LN super clone carries a 40mm Oyster case measuring 12.5mm thick, built on a 904L stainless steel core for accurate weight and corrosion resistance. The case receives a hard black DLC-style coating that covers the lugs, flanks, and bezel in a uniform matte-to-satin black finish, matching the Blaken blackout treatment. The screw-down Triplock crown at 3 o'clock seals the case for water resistance to 300 meters and carries the same black coating as the case body.
The unidirectional rotating bezel turns counter-clockwise only and carries a graduated 60-minute black ceramic insert for tracking elapsed dive time. The ceramic insert resists scratching and fading, and the coated bezel edge keeps the all-black profile consistent with the Blaken-style build. This super clone follows the genuine 116610LN bezel action with a firm 120-click rotation that locks each minute marker into place.
Scratch-resistant sapphire crystal with anti-reflective coating covers the black dial and carries a Cyclops magnification lens over the date aperture at 3 o'clock. The Cyclops lens enlarges the date for quick reading, a standard Submariner Date feature. The solid screw-down caseback carries the black coating, seals the Caliber 3135 clone movement, and supports the 300-meter water resistance rating of the Submariner.
The black dial of this Submariner 116610LN Blaken Custom carries a deep glossy black surface that anchors the all-black profile of the watch. The applied hour markers sit in raised relief against the black surface, and the date aperture sits at 3 o'clock under the Cyclops lens. The black dial pairs with the coated case and bezel to give the Blaken-style build a single uninterrupted black tone.
The Submariner 116610LN carries large applied hour markers and Mercedes-style hands filled with Chromalight luminous material for long-duration legibility underwater. The Chromalight fill glows blue in low light, which gives the diver a clear time reading through a multi-hour descent. The central hour, minute, and seconds hands follow the genuine reference in shape and proportion, and the markers match the size and placement of the authentic 116610LN.
The applied Rolex coronet sits at 12 o'clock, with "Rolex Oyster Perpetual Date Submariner 300m=1000ft" printed across the dial in fine white and green text. The depth rating line near 6 o'clock marks the 300-meter capability. The black dial, the black ceramic bezel, and the Blaken-style coating give the 116610LN a high-contrast tool-watch face with a fully blacked-out case.
The Rolex Submariner 116610LN super clone runs on a Swiss-grade automatic movement engineered to match the genuine Rolex Caliber 3135 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a power reserve of approximately 48 hours for two days off the wrist. The caliber drives the central hours, minutes, seconds, and the date at 3 o'clock.
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 3135. The smooth sweeping seconds hand and the quiet rotor confirm the Swiss-grade build. The 300-meter water resistance, the screw-down Triplock crown, and the coated screw-down caseback let the 116610LN Blaken Custom hold its seal through recreational and professional diving.
Spec grid:
The Submariner 116610LN Blaken Custom carries the Oyster bracelet, the three-piece-link design Rolex uses across its professional dive models. The bracelet receives the same black DLC-style coating as the case across every link, tapering smoothly from the lugs toward the wrist. A folding Oysterlock safety clasp prevents accidental opening and closes flush against the wrist. The Submariner uses the Oyster bracelet and never a President bracelet.
The watch weighs approximately 150 grams on the full coated Oyster bracelet, giving the solid wrist presence buyers expect from a steel Submariner. The Rolex Glidelock extension system inside the clasp adjusts the bracelet length in 2mm steps for a precise fit over a wetsuit or a bare wrist. The 40mm case and three-link bracelet sit comfortably on wrists from 6.5 to 8 inches.
The Rolex Submariner line offers the standard steel finish and the blacked-out custom finish across two case generations, and this reference holds the 40mm 116610LN treated in the Blaken-style blackout. The comparison of the three Submariner options is listed below.
| Variant | Case Size | Finish | Super Clone Price |
|---|---|---|---|
| Submariner 116610LN Blaken Custom (this reference) | 40mm | Black DLC-coated steel | $1,449 |
| Submariner 116610LN Standard | 40mm | Brushed and polished steel | $1,349 |
| Submariner 126610LN | 41mm | Brushed and polished steel | $1,399 |
Buyers select the Submariner 116610LN Blaken Custom for the fully blacked-out case, bezel, and bracelet that the standard steel reference does not carry. Standard 116610LN buyers prefer the classic brushed-and-polished steel look. The 126610LN buyer chooses the current 41mm case with Caliber 3235. The Submariner 116610LN Blaken Custom gives the stealth dive-watch option with the same 40mm proportions as the steel original.
The Rolex Submariner launched in 1953 as one of the first dive watches rated for recreational scuba diving, and it set the template for the modern tool watch with a rotating timing bezel and a waterproof Oyster case. Rolex rated the early Submariner to 100 meters and raised the rating over successive references, reaching the 300-meter standard that the 116610LN carries. The reference 116610LN arrived in 2010 as the previous-generation Submariner Date, with a 40mm Oystersteel case, a black Cerachrom ceramic bezel, a black dial with applied markers, and the in-house Caliber 3135. Rolex replaced the 116610LN in 2020 with the 41mm reference 126610LN and Caliber 3235.
Blaken is an independent customizer based in Germany that builds fully blacked-out versions of genuine Rolex watches. Blaken applies a hard black coating to the case, bezel, and bracelet of a donor Rolex, then reassembles the watch with the original movement. The Submariner 116610LN Blaken Custom Super Clone carries that combined heritage of the Submariner dive-watch design and the Blaken blackout treatment onto the wrist.
Every Rolex Submariner 116610LN Blaken Custom super clone passes a four-stage quality control sequence before shipping. The QC steps are listed below.
The Submariner 116610LN Blaken Custom Super Clone ships in secure, discreet packaging to protect your privacy. The full package contents are listed below.
The Rolex Submariner 116610LN Blaken Custom super clone ships within 24 hours of order confirmation via DHL Express or FedEx Priority with full insurance and discreet packaging. Worldwide delivery lands in 5 to 10 business days across the USA, UK, UAE, India, and Europe. Every watch carries a 1-year limited warranty covering movement defects, with replacement-parts support and servicing guidance provided after purchase. The support channels for the Submariner 116610LN Blaken Custom are listed below.
Real owners of the Rolex Submariner 116610LN Blaken Custom super clone share the wrist-side verdict. Ratings average 4.9 / 5 across 142 verified orders.
"I wanted the blacked-out Submariner look without the Blaken price. The coating on this 116610LN is even across the case, bezel, and every bracelet link with no thin spots. The black ceramic bezel turns with a tight 120-click action. At $1,449 it reads like a real blackout custom on the wrist."
"Shipped DHL and arrived in Manchester in 6 days. The packaging was discreet exactly as described. I have worn it swimming and the 300-meter seal has held with no fogging. The all-black case and bracelet pull the whole watch together and it wears like a proper 40mm Submariner."
"I was unsure about spending this much on my first clone. WhatsApp support answered every question about the Blaken-style coating before I ordered. The watch arrived in a full box set with papers. The deep black dial and the matte coated case closed the deal for me."
Yes, the Rolex Submariner 116610LN Blaken Custom sold on Super Clone Watches is a 1:1 super clone that matches the genuine Rolex reference base at 98% visual and dimensional accuracy. The build follows the 40mm 116610LN case, the black ceramic bezel, the black dial, and the Oyster bracelet geometry within tight tolerance, then carries the Blaken-style blackout coating over the full watch. The price of $1,449 compares to a Blaken blackout Submariner near $24,000.
A Blaken Submariner is a Rolex Submariner customized by Blaken, an independent German company that applies a hard black coating to the case, bezel, and bracelet of a genuine Rolex. Blaken is a customizer rather than a Rolex reference, and this page builds a Blaken-style blackout custom on the 116610LN Submariner base. The blackout treatment gives the dive watch a fully stealth all-black profile.
A Swiss-grade automatic clone of Rolex Caliber 3135 powers this Submariner 116610LN Blaken Custom super clone. The movement runs at 28,800 vibrations per hour, holds a power reserve of approximately 48 hours, and drives the hours, minutes, seconds, and the date at 3 o'clock. Performance matches the genuine caliber on frequency and autonomy, with a smooth sweeping seconds hand and a quiet winding rotor.
The Submariner 116610LN holds water resistance to 300 meters, which covers recreational and professional scuba diving. The 40mm coated steel case, the screw-down Triplock crown, and the screw-down caseback seal the watch against pressure at depth. This super clone passes a water-resistance pressure test during quality control to confirm the seal before shipping.
The black coating on the Submariner Blaken Custom uses a hard DLC-style finish that resists everyday scratching and abrasion. The coating covers the case, bezel, and bracelet, and it holds its matte-to-satin black tone through normal wear. Sharp impacts against hard surfaces show on any coated watch, so the watch suits daily wear with routine care.
The difference between the 116610LN and the 126610LN is case size, movement, and generation. The 116610LN is the previous-generation Submariner Date with a 40mm case and Caliber 3135, while the 126610LN is the current Submariner Date with a 41mm case and Caliber 3235. This Blaken Custom builds on the 40mm 116610LN base for the slimmer previous-generation proportions.
A genuine Blaken Submariner blackout custom sells near $24,000, since it combines the cost of a donor Rolex Submariner with the Blaken coating service. This super clone sells for $1,449, which delivers 98% visual and functional parity at roughly 6% of the genuine blackout-custom price. Buyers receive the full stealth 40mm Submariner wrist presence without the capital commitment.
A 1-year limited warranty covers movement defects and manufacturing faults on this Submariner 116610LN Blaken Custom super clone. Replacement parts sourcing runs through the originating factory via Super Clone Watches support. Movement servicing guidance is provided through WhatsApp and email for the lifetime of the watch.
