| Reference | 116610LN-0001 |
|---|---|
| Case | 40mm × 12.5mm, Oystersteel |
| Dial | Black with black ceramic bezel |
The Submariner 116610LN-0001 is the previous-generation 40mm black-bezel version of the Rolex professional dive watch, built here with a black Cerachrom ceramic bezel and a black dial. This super clone follows the 116610LN reference with a 40mm Oystersteel case, a screw-down Triplock crown, and the three-link Oyster bracelet for $1,399. Every proportion, the ceramic bezel insert, and each bracelet link follow the genuine reference within tight production tolerance.
The Rolex Submariner 116610LN super clone carries a 40mm Oyster case measuring 12.5mm thick, built on a 904L stainless steel core for accurate weight and corrosion resistance. The case alternates mirror-polished and satin-brushed surfaces along the lugs and flanks, matching the finishing pattern of the genuine ceramic-bezel Submariner. The screw-down Triplock crown at 3 o'clock seals the case for water resistance to 300 meters, and the 116610LN introduced the broader Maxi-case lugs and crown guards that defined the 2010 generation.
The unidirectional rotating bezel turns counter-clockwise only and carries a graduated 60-minute black Cerachrom ceramic insert for tracking elapsed dive time. The black Cerachrom insert resists scratching and ultraviolet fading, which keeps the bezel color stable through years of daily wear and sun exposure. The engraved numerals carry a platinum-coated finish for legibility against the black ceramic, and this super clone follows the genuine 116610LN bezel action with a firm 120-click rotation that locks each minute marker into place.
Scratch-resistant sapphire crystal with anti-reflective coating covers the black dial and carries a Cyclops magnification lens over the date aperture at 3 o'clock. The Cyclops lens enlarges the date by 2.5 times for quick reading, a long-standing detail of the dated Submariner line. The solid screw-down caseback seals the Caliber 3135 clone movement and supports the 300-meter water resistance rating of the Submariner.
The black dial of this Submariner 116610LN-0001 super clone carries a deep glossy black lacquer surface that pairs with the black Cerachrom ceramic bezel for the model's all-black tool-watch identity. The dial code "-0001" marks the standard black dial of this reference, and the date aperture sits at 3 o'clock under the Cyclops lens. A thin white border frames the date wheel for contrast against the black surface.
The Submariner 116610LN carries large applied hour markers and Mercedes-style hands filled with Chromalight luminous material for long-duration legibility underwater. The Chromalight fill glows blue in low light, which gives the diver a clear time reading through a multi-hour descent. The central hour, minute, and seconds hands follow the genuine reference in shape and proportion, and the markers match the size and placement of the authentic 116610LN.
The applied Rolex coronet sits at 12 o'clock, with "Rolex Oyster Perpetual Date Submariner 300m=1000ft" printed across the dial in fine white text. The "Submariner" line near 6 o'clock holds the model name in clean print on the glossy black surface. The black dial, the black Cerachrom ceramic bezel, and the steel case give the 116610LN a uniform, high-contrast diver face.
The Rolex Submariner 116610LN super clone runs on a Swiss-grade automatic movement engineered to match the genuine Rolex Caliber 3135 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a power reserve of approximately 48 hours for a full day off the wrist. The Caliber 3135 powered the 116610LN throughout its 2010 to 2020 production run, and this clone follows the same caliber lineage.
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 3135. The smooth sweeping seconds hand and the quiet rotor confirm the Swiss-grade build. The 300-meter water resistance and the screw-down Triplock crown let the 116610LN super clone hold its seal through recreational diving and daily wear.
Spec grid:
The Submariner 116610LN super clone carries the Oyster bracelet, the three-piece-link design Rolex uses across its professional dive models. The bracelet uses an Oystersteel finish with brushed outer links and a polished center accent, tapering smoothly from the lugs toward the wrist. A folding Oysterlock safety clasp prevents accidental opening and closes flush against the wrist. The Submariner uses the Oyster bracelet and never a President bracelet.
The watch weighs approximately 155 grams on the full Oyster bracelet, giving the balanced wrist presence buyers expect from a steel Submariner. The Rolex Glidelock extension system inside the clasp adjusts the bracelet length in 2mm steps for a precise fit over a wetsuit or a bare wrist. The 40mm case and solid three-link bracelet sit comfortably on wrists from 6.5 to 8 inches.
The Rolex Submariner 116610LN super clone carries a 40mm Oyster case measuring 12.5mm thick, built on a 904L stainless steel core for accurate weight and corrosion resistance. The case alternates mirror-polished and satin-brushed surfaces along the lugs and flanks, matching the finishing pattern of the genuine ceramic-bezel Submariner. The screw-down Triplock crown at 3 o'clock seals the case for water resistance to 300 meters, and the 116610LN introduced the broader Maxi-case lugs and crown guards that defined the 2010 generation.
The unidirectional rotating bezel turns counter-clockwise only and carries a graduated 60-minute black Cerachrom ceramic insert for tracking elapsed dive time. The black Cerachrom insert resists scratching and ultraviolet fading, which keeps the bezel color stable through years of daily wear and sun exposure. The engraved numerals carry a platinum-coated finish for legibility against the black ceramic, and this super clone follows the genuine 116610LN bezel action with a firm 120-click rotation that locks each minute marker into place.
Scratch-resistant sapphire crystal with anti-reflective coating covers the black dial and carries a Cyclops magnification lens over the date aperture at 3 o'clock. The Cyclops lens enlarges the date by 2.5 times for quick reading, a long-standing detail of the dated Submariner line. The solid screw-down caseback seals the Caliber 3135 clone movement and supports the 300-meter water resistance rating of the Submariner.
The black dial of this Submariner 116610LN-0001 super clone carries a deep glossy black lacquer surface that pairs with the black Cerachrom ceramic bezel for the model's all-black tool-watch identity. The dial code "-0001" marks the standard black dial of this reference, and the date aperture sits at 3 o'clock under the Cyclops lens. A thin white border frames the date wheel for contrast against the black surface.
The Submariner 116610LN carries large applied hour markers and Mercedes-style hands filled with Chromalight luminous material for long-duration legibility underwater. The Chromalight fill glows blue in low light, which gives the diver a clear time reading through a multi-hour descent. The central hour, minute, and seconds hands follow the genuine reference in shape and proportion, and the markers match the size and placement of the authentic 116610LN.
The applied Rolex coronet sits at 12 o'clock, with "Rolex Oyster Perpetual Date Submariner 300m=1000ft" printed across the dial in fine white text. The "Submariner" line near 6 o'clock holds the model name in clean print on the glossy black surface. The black dial, the black Cerachrom ceramic bezel, and the steel case give the 116610LN a uniform, high-contrast diver face.
The Rolex Submariner 116610LN super clone runs on a Swiss-grade automatic movement engineered to match the genuine Rolex Caliber 3135 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a power reserve of approximately 48 hours for a full day off the wrist. The Caliber 3135 powered the 116610LN throughout its 2010 to 2020 production run, and this clone follows the same caliber lineage.
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 3135. The smooth sweeping seconds hand and the quiet rotor confirm the Swiss-grade build. The 300-meter water resistance and the screw-down Triplock crown let the 116610LN super clone hold its seal through recreational diving and daily wear.
Spec grid:
The Submariner 116610LN super clone carries the Oyster bracelet, the three-piece-link design Rolex uses across its professional dive models. The bracelet uses an Oystersteel finish with brushed outer links and a polished center accent, tapering smoothly from the lugs toward the wrist. A folding Oysterlock safety clasp prevents accidental opening and closes flush against the wrist. The Submariner uses the Oyster bracelet and never a President bracelet.
The watch weighs approximately 155 grams on the full Oyster bracelet, giving the balanced wrist presence buyers expect from a steel Submariner. The Rolex Glidelock extension system inside the clasp adjusts the bracelet length in 2mm steps for a precise fit over a wetsuit or a bare wrist. The 40mm case and solid three-link bracelet sit comfortably on wrists from 6.5 to 8 inches.
The Rolex Submariner offers three headline steel references across generation and date display, and the 116610LN holds the previous-generation 40mm black-bezel dated model. The comparison of the three Submariner references is listed below.
| Variant | Case Size | Bezel & Date | Super Clone Price |
|---|---|---|---|
| Submariner 116610LN (this reference) | 40mm | Black Cerachrom ceramic, date | $1,399 |
| Submariner 126610LN | 41mm | Black Cerachrom ceramic, date | $1,449 |
| Submariner 114060 | 40mm | Black Cerachrom ceramic, no date | $1,349 |
Buyers select the Submariner 116610LN for the compact 40mm case and the proven Caliber 3135, the format many collectors call the last classic-size modern Submariner. Buyers who want the current 41mm case and the Caliber 3235 prefer the 126610LN. The 114060 buyer chooses the symmetrical no-date dial and the cleaner crystal without the Cyclops lens. The Submariner 116610LN Super Clone gives the 40mm proportions with the practical date complication.
The Rolex Submariner launched in 1953 as one of the first wristwatches built for recreational scuba diving with water resistance guaranteed to 100 meters. Rolex equipped the model with a unidirectional rotating bezel for timing a dive and a luminous dial for reading the time in dark water. The Submariner reached 300-meter water resistance through later references and became the reference point for the modern dive watch. Rolex introduced reference 116610LN in 2010 as the first standard black Submariner Date with a Cerachrom ceramic bezel, replacing the earlier aluminum bezel that scratched and faded over time. The 116610LN also brought the broader Maxi-case lugs, the upgraded Glidelock clasp, and the Caliber 3135 movement. Rolex produced the 116610LN until 2020, when reference 126610LN replaced it with a 41mm case and the Caliber 3235. The Submariner 116610LN Super Clone carries that ceramic-bezel heritage and the proven 40mm Submariner dive engineering onto the wrist.
Every Rolex Submariner 116610LN super clone passes a four-stage quality control sequence before shipping. The QC steps are listed below.
The Submariner 116610LN Super Clone ships in secure, discreet packaging to protect your privacy. The full package contents are listed below.
The Rolex Submariner 116610LN super clone ships within 24 hours of order confirmation via DHL Express or FedEx Priority with full insurance and discreet packaging. Worldwide delivery lands in 5 to 10 business days across the USA, UK, UAE, India, and Europe. Every watch carries a 1-year limited warranty covering movement defects, with replacement-parts support and servicing guidance provided after purchase. The support channels for the Submariner 116610LN Super Clone are listed below.
Real owners of the Rolex Submariner 116610LN super clone share the wrist-side verdict. Ratings average 4.9 / 5 across 211 verified orders.
"I wanted the 116610LN ceramic bezel, and the Cerachrom insert on this one is the correct deep gloss black with crisp engraved numerals. The black dial reads sharp against it. The bezel turns with a tight 120-click action. At $1,399 it looks like the genuine Submariner on the wrist."
"Shipped DHL and arrived in Leeds in 6 days. The packaging was discreet exactly as described. I have worn it swimming and in the shower for two months and the seal has held without any fogging. The 40mm case wears comfortably under a shirt cuff."
"I was nervous spending this much on my first clone. WhatsApp support answered every question about the Submariner before I ordered. The watch arrived in a full box set with papers. The black ceramic bezel and the Cyclops date lens closed the deal for me."
Yes, the Rolex Submariner 116610LN-0001 sold on Super Clone Watches is a 1:1 super clone that matches the genuine Rolex reference at 98% visual and dimensional accuracy. The build matches the black Cerachrom ceramic bezel, the black dial, the Cyclops date lens, the screw-down Triplock crown, and the Oyster bracelet geometry within tight tolerance. The price of $1,399 compares to a genuine market figure near $11,000 for the discontinued reference.
A Swiss-grade automatic clone of Rolex Caliber 3135 powers this Submariner 116610LN super clone. The movement runs at 28,800 vibrations per hour, holds a power reserve of approximately 48 hours, and drives the hours, minutes, seconds, and the date at 3 o'clock. Performance matches the genuine Caliber 3135 on frequency and autonomy, with a smooth sweeping seconds hand and a quiet winding rotor.
The 116610LN ceramic bezel is better than the older aluminum bezel because the black Cerachrom material resists scratching and ultraviolet fading. The aluminum inserts on Submariner references before 2010 scratched with daily wear and faded under sun exposure over time. The Cerachrom ceramic bezel on the 116610LN holds its gloss and color through years of use, which keeps the watch looking new.
The Submariner 116610LN holds water resistance to 300 meters, which covers recreational scuba diving and all daily wear. The 40mm Oystersteel case, the screw-down Triplock crown, and the screw-down caseback seal the watch against pressure at depth. This super clone passes a water-resistance pressure test during quality control to confirm the seal before shipping.
The difference between the 116610LN and the 126610LN is the generation and the case size. The Submariner 116610LN is the previous-generation 40mm model with the Caliber 3135 and a roughly 48-hour power reserve, while the 126610LN is the current 41mm model with the Caliber 3235 and a roughly 70-hour power reserve. Both references share the black Cerachrom ceramic bezel, the black dial, and the 300-meter water resistance.
The -0001 suffix on the 116610LN-0001 is the Rolex dial code that identifies the standard black dial configuration of this reference. Rolex assigns a numeric suffix to the base reference to specify the exact dial variant. The 116610LN-0001 carries the glossy black dial with Chromalight markers paired with the black Cerachrom ceramic bezel.
The authentic Rolex Submariner 116610LN trades near $11,000 on the pre-owned market since Rolex discontinued the reference in 2020. This super clone sells for $1,399, which delivers 98% visual and functional parity at roughly 13% of the genuine market price. Buyers receive the full steel Submariner wrist presence and ceramic-bezel identity without the capital commitment.
A 1-year limited warranty covers movement defects and manufacturing faults on this Submariner 116610LN super clone. Replacement parts sourcing runs through the originating factory via Super Clone Watches support. Movement servicing guidance is provided through WhatsApp and email for the lifetime of the watch.
