| Reference | 218239 |
|---|---|
| Case | 41mm × 12mm, 18k white gold-tone |
| Dial | Grey with applied Roman numerals |
The Day-Date II 218239 is the 41mm white gold version of the Rolex Day-Date II, the larger Day-Date generation Rolex produced from 2008 to 2015. This super clone reproduces the 218239 reference with a grey dial, applied Roman numerals, a fluted bezel, and the spelled-out day window for $1,499. Every proportion, numeral, and bracelet link follows the genuine reference within tight production tolerance.
The Rolex Day-Date II 218239 super clone carries a 41mm Oyster case measuring 12mm thick, built on a 904L stainless steel core with a high-grade white gold-tone finish for accurate color and long-term wear. The 41mm diameter is the defining trait of the Day-Date II, since Rolex enlarged the Day-Date from the classic 36mm format for this generation.
The fluted bezel rings the dial with evenly spaced grooves, and this super clone cuts each groove at a consistent angle so light moves cleanly around the rim. Mirror-polished surfaces wrap the case and the bezel for the bright white gold look. The Twinlock screw-down crown sits at 3 o'clock, protected by a polished crown guard and engraved with the Rolex coronet.
Scratch-resistant sapphire crystal covers the grey dial and resists daily knocks for years of clear reading. A Cyclops lens sits above the date at 3 o'clock and magnifies the date 2.5 times for fast legibility. The solid screw-down caseback seals the movement and holds water resistance to 100 meters, supported by the Twinlock crown system.
The grey dial is the defining attribute of this Day-Date II 218239 super clone, and the clone reproduces the cool rhodium-grey tone that pairs cleanly with the white gold case. Applied Roman numerals sit at every hour position in polished white gold-tone metal, faceted to catch light against the grey surface.
The spelled-out day display sits in an arched window at 12 o'clock, where it takes the place of the XII numeral, and changes instantaneously at midnight. The date appears at 3 o'clock under the Cyclops lens in place of the III numeral. White gold-tone baton hands sweep across the grey dial, with the seconds hand running smoothly at 28,800 vibrations per hour for the genuine Day-Date motion.
The applied Rolex coronet sits at 12 o'clock above the day window, with "Rolex Oyster Perpetual Day-Date II" printed in crisp, fine text. The minute track frames the dial edge with even spacing. The grey dial and the Roman numerals give the 218239 a restrained, formal balance against the white gold case.
The Rolex Day-Date II 218239 super clone runs on a Swiss-grade automatic movement engineered to reproduce the genuine Rolex Caliber 3156, the caliber that powered the Day-Date II generation. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 48-hour power reserve.
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 3156. The smooth sweeping seconds hand and the quiet rotor confirm the Swiss-grade build. The instantaneous day and date both jump cleanly at midnight rather than crawling across the change.
Spec grid:
The Day-Date II 218239 super clone carries the President bracelet, the three-piece semi-circular link design Rolex created for the Day-Date in 1956. The bracelet uses a white gold-tone finish to match the case and the fluted bezel, with polished links scaled wider to suit the 41mm case.
The watch weighs approximately 160 grams on the full bracelet, giving the strong wrist presence the Day-Date II is known for. The concealed Crownclasp closes flush and hides inside the bracelet, leaving an unbroken band of links around the wrist. The 41mm case and wide bracelet sit best on wrists from 7 to 8.5 inches.
The Rolex Day-Date II 218239 super clone carries a 41mm Oyster case measuring 12mm thick, built on a 904L stainless steel core with a high-grade white gold-tone finish for accurate color and long-term wear. The 41mm diameter is the defining trait of the Day-Date II, since Rolex enlarged the Day-Date from the classic 36mm format for this generation.
The fluted bezel rings the dial with evenly spaced grooves, and this super clone cuts each groove at a consistent angle so light moves cleanly around the rim. Mirror-polished surfaces wrap the case and the bezel for the bright white gold look. The Twinlock screw-down crown sits at 3 o'clock, protected by a polished crown guard and engraved with the Rolex coronet.
Scratch-resistant sapphire crystal covers the grey dial and resists daily knocks for years of clear reading. A Cyclops lens sits above the date at 3 o'clock and magnifies the date 2.5 times for fast legibility. The solid screw-down caseback seals the movement and holds water resistance to 100 meters, supported by the Twinlock crown system.
The grey dial is the defining attribute of this Day-Date II 218239 super clone, and the clone reproduces the cool rhodium-grey tone that pairs cleanly with the white gold case. Applied Roman numerals sit at every hour position in polished white gold-tone metal, faceted to catch light against the grey surface.
The spelled-out day display sits in an arched window at 12 o'clock, where it takes the place of the XII numeral, and changes instantaneously at midnight. The date appears at 3 o'clock under the Cyclops lens in place of the III numeral. White gold-tone baton hands sweep across the grey dial, with the seconds hand running smoothly at 28,800 vibrations per hour for the genuine Day-Date motion.
The applied Rolex coronet sits at 12 o'clock above the day window, with "Rolex Oyster Perpetual Day-Date II" printed in crisp, fine text. The minute track frames the dial edge with even spacing. The grey dial and the Roman numerals give the 218239 a restrained, formal balance against the white gold case.
The Rolex Day-Date II 218239 super clone runs on a Swiss-grade automatic movement engineered to reproduce the genuine Rolex Caliber 3156, the caliber that powered the Day-Date II generation. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 48-hour power reserve.
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 3156. The smooth sweeping seconds hand and the quiet rotor confirm the Swiss-grade build. The instantaneous day and date both jump cleanly at midnight rather than crawling across the change.
Spec grid:
The Day-Date II 218239 super clone carries the President bracelet, the three-piece semi-circular link design Rolex created for the Day-Date in 1956. The bracelet uses a white gold-tone finish to match the case and the fluted bezel, with polished links scaled wider to suit the 41mm case.
The watch weighs approximately 160 grams on the full bracelet, giving the strong wrist presence the Day-Date II is known for. The concealed Crownclasp closes flush and hides inside the bracelet, leaving an unbroken band of links around the wrist. The 41mm case and wide bracelet sit best on wrists from 7 to 8.5 inches.
The Day-Date offers two modern generation routes, and the Day-Date II 218239 holds the larger 41mm case. The comparison of the two generations is listed below.
| Generation | Case Size | Movement | Super Clone Price |
|---|---|---|---|
| Day-Date II 218239 (this reference) | 41mm | Caliber 3156 clone | $1,499 |
| Day-Date 40 228239 | 40mm | Caliber 3255 clone | $1,499 |
Buyers select the Day-Date II 218239 for the larger 41mm case and the bolder wrist presence it brings, along with the discontinued-generation character that sets it apart. Day-Date 40 buyers prefer the slightly smaller 40mm case and the newer Caliber 3255 with a longer power reserve. The 218239 Super Clone gives the larger, more assertive of the two.
The Rolex Day-Date launched in 1956 as the first wristwatch to display the day of the week spelled out in full in a window on the dial, and Rolex paired it only with platinum and 18k gold, which earned it the "President" name. Rolex introduced the Day-Date II in 2008 with a 41mm case, the largest Day-Date the brand had made, powered by Caliber 3156 with a Paraflex shock absorber. Rolex produced the Day-Date II until 2015, when the 40mm Day-Date 40 with Caliber 3255 replaced it. The 218239 reference holds the white gold case in that 2008 to 2015 generation. The 218239 Super Clone carries that distinct chapter of the Day-Date line onto the wrist.
Every Rolex Day-Date II 218239 super clone passes a four-stage quality control sequence before shipping. The QC steps are listed below.
The 218239 Super Clone ships in secure, discreet packaging to protect your privacy. The full package contents are listed below.
The Rolex Day-Date II 218239 super clone ships within 24 hours of order confirmation via DHL Express or FedEx Priority with full insurance and discreet packaging. Worldwide delivery lands in 5 to 10 business days across the USA, UK, UAE, India, and Europe. Every watch carries a 1-year limited warranty covering movement defects, with replacement-parts support and servicing guidance provided after purchase. The support channels for the 218239 Super Clone are listed below.
Real owners of the Rolex Day-Date II 218239 super clone share the wrist-side verdict. Ratings average 4.9 / 5 across 119 verified orders.
"I wanted the larger Day-Date, and the 41mm case of the Day-Date II fills the wrist the way I hoped. The grey dial with Roman numerals reads clean and formal. The President bracelet feels heavy and solid. At $1,499 it stands out."
"Shipped DHL and arrived in Dubai in 7 days. The packaging was discreet exactly as described. The day window snaps over at midnight cleanly. The white gold tone and the grey dial work well together."
"I was nervous spending this much on my first clone. WhatsApp support answered every question before I ordered. The watch arrived in a full box set with papers. The Roman numeral spacing and the fluted bezel closed the deal for me."
Yes, the Rolex Day-Date II 218239 sold on Super Clone Watches is a 1:1 super clone that reproduces the genuine Rolex reference at 98% visual and dimensional accuracy. The build matches the grey dial tone, the applied Roman numerals, and the 41mm President bracelet geometry within tight tolerance. The price of $1,499 compares to a genuine market value near $34,000 for the discontinued reference.
The Day-Date II is the 41mm Day-Date generation Rolex produced from 2008 to 2015. It uses a larger case than the 40mm Day-Date 40 that replaced it in 2015, and it runs on Caliber 3156 rather than the later Caliber 3255. This 218239 super clone reproduces the Day-Date II in the white gold case with a grey Roman numeral dial.
A Swiss-grade automatic clone of Rolex Caliber 3156 powers this Day-Date II 218239 super clone. The movement runs at 28,800 vibrations per hour, holds a 48-hour power reserve, and drives the instantaneous day and date functions. Caliber 3156 is the genuine caliber Rolex used for the Day-Date II, and this clone matches it on frequency and autonomy.
The case uses a high-grade white gold-tone finish over a 904L stainless steel core rather than solid 18k white gold. This construction delivers the exact bright white metal color, a substantial wrist weight, and durable scratch resistance for daily wear. Solid 18k white gold on the genuine Rolex 218239 adds a large share of the market value without changing the wrist-side appearance.
Yes, the day and date display changes instantly on this 218239 super clone. The spelled-out day in the arched window at 12 o'clock and the date at 3 o'clock both jump precisely at midnight rather than crawling across the change. The Caliber 3156 clone movement drives both displays through a single instantaneous mechanism.
The authentic Rolex Day-Date II 218239 carries a market value near $34,000 on the secondary market, since Rolex discontinued the reference in 2015. This super clone sells for $1,499, which delivers 98% visual and functional parity at roughly 4.4% of the genuine value. Buyers receive the full 41mm white gold Day-Date II wrist presence without the capital commitment.
The Rolex Day-Date II 218239 super clone ships via DHL Express or FedEx Priority with full insurance and tracked, signature-required delivery. The watch travels in secure, discreet packaging to protect your privacy. Transit time runs 5 to 10 business days to the USA, UK, UAE, India, and Europe, and the shipping cost is included in the price.
A 1-year limited warranty covers movement defects and manufacturing faults on this Day-Date II 218239 super clone. Replacement parts sourcing runs through the originating factory via Super Clone Watches support. Movement servicing guidance is provided through WhatsApp and email for the lifetime of the watch.
