Rolex Day-Date 218239-0041 V6 White Roman Dial Super Clone – 41mm White Gold-Tone President with Caliber 3156 Clone

Case, Crown and Crystal - 41mm Stainless Steel Build with Fluted Bezel

The Day-Date 218239-0041 V6 super clone features a 41mm white-gold-toned case measuring 13mm thick, built on a 904L stainless steel core with a polished surface that holds the cool tone of the genuine white gold reference across years of daily wear. The 48mm lug-to-lug and 21mm lug width follow the Day-Date II case profile Rolex used across the 218xxx generation, sized for the modern dress wrist and the office cuff. The wider lugs and broader bezel give the 218239 a more substantial visual presence than the 36mm President, while the polished finish keeps the watch firmly in dress-watch territory.

Case Geometry and Finishing

The case finishing on this 218239-0041 super clone follows the Day-Date II's full-polish dress grammar across every external surface. Polished lug tops and side flanks catch light in a continuous flow from bracelet end-link to bezel. The signature fluted bezel cuts in 60 deep grooves around the dial opening, machined into the white-gold-tone case top in a single fixed piece per Rolex's original construction logic. The Triplock screw-down crown at 3 o'clock holds the Rolex coronet in raised relief and seals the case at 100 meters of water resistance.

Sapphire Crystal, Caseback and Triplock Crown

Synthetic sapphire crystal with a 2.5x Cyclops lens over the date covers the dial on the Day-Date II 218239 super clone. The Cyclops magnifies the date aperture at 3 o'clock in the same proportion the genuine Rolex uses for fast at-a-glance reading. A solid screw-down Oyster caseback seals the movement against pressure and dust. The Triplock crown uses 3 sealed gaskets stacked in the winding stem, the same sealing architecture the genuine Day-Date II carries for true office-to-pool wearability.

Lacquered White Dial with 11 Applied White-Gold Roman Numerals

The Day-Date 218239-0041 V6 White Roman Dial super clone features a smooth lacquered white finish that holds the cool optical tone of the genuine 0041 dial under every light condition. The 11 applied Roman numerals sit in white-gold-tone settings at every hour position except the 12 o'clock spot, where the applied Rolex coronet appears above the day aperture. V6 Factory production techniques deliver the numeral facet polish, the setting symmetry, and the lacquer surface depth within tight tolerance to the genuine 218239-0041 dial specification.

Day Aperture at 12, Date Window at 3 and Cyclops Magnification

The applied Rolex coronet sits at 12 o'clock above the curved "DAY" aperture that spells the day of the week in full English script across all 7 weekdays. The printed "Rolex" script, the "OYSTER PERPETUAL DAY-DATE" line, and the "SUPERLATIVE CHRONOMETER OFFICIALLY CERTIFIED" text below the day aperture match the placement and typography of the 218xxx generation specification. The date aperture at 3 o'clock reads under the 2.5x Cyclops lens for one-glance date legibility, with the date wheel printed in black against the white background for high optical contrast.

Hour and Minute Hands, Sweep Seconds and Dial Symmetry

The Day-Date II 218239 V6 super clone features white-gold-tone baton hour and minute hands that taper to a clean point against the white lacquered background. The sweep seconds hand carries a thin polished finish that crosses the Roman numerals without visual interruption. The dial symmetry holds the day aperture at 12 and the date aperture at 3 in the exact ratio the genuine reference uses, and the printed text balances around the center pinion for legible time-reading at every wrist angle.

Accuracy, Quickset Function and Finishing

Daily deviation holds within -5 to +10 seconds per day on the Day-Date 218239-0041 V6 super clone after factory regulation. The quickset day advances in single steps via the crown in position 2, the quickset date advances in single steps via the same crown position in the opposite rotation direction, and the hour and minute hands set in position 3 without disturbing the day or date discs. The movement receives Côtes de Genève striping on the bridges, perlage on the mainplate, and circular graining on the rotor for a clean finished appearance behind the solid Oyster caseback.

Swiss-Grade Clone of the Rolex Caliber 3156

The Day-Date 218239-0041 V6 super clone runs on a Swiss-grade automatic movement built to match the genuine Caliber 3156 in frequency, autonomy, and double-quickset day-and-date function. The movement operates at 28,800 vibrations per hour, holds 48 hours of power reserve, and uses a bidirectional Perpetual rotor for automatic winding. The genuine Caliber 3156 carries the paramagnetic blue Parachrom hairspring architecture Rolex introduced on the Day-Date II line, and the V6 clone caliber follows the same double-quickset setting logic for true 1:1 user experience.

Movement Spec Grid

President Bracelet with Concealed Crownclasp

The Day-Date 218239-0041 V6 super clone ships on the white-gold-tone President bracelet that defines the Day-Date silhouette. The 3-piece semi-circular link construction tapers from 21mm at the case to 18mm at the clasp, with polished center links framed by satin-brushed outer links across the full length. The concealed Crownclasp folds flat under the central link and locks shut with an engraved Rolex coronet on the cover plate, matching the genuine 218239 hardware in finish and dimension.

Wrist Feel, Weight and Comfort

The 218239-0041 V6 super clone weighs 158 grams approximately on the full President bracelet, sitting close to the wrist mass of the genuine white-gold 218239 within a 6-gram margin on account of the 904L stainless steel core. The 41mm case sits flush on 6.5-inch to 8-inch wrists thanks to the 48mm lug-to-lug measurement and the 13mm case thickness. The President bracelet articulates through 3 hinge points per link for fluid drape on the wrist, and the concealed Crownclasp keeps the bracelet line uninterrupted across the back of the wrist.