Richard Mille RM 055 Super Clone: Bubba Watson White Sapphire Skeleton Dial

The Richard Mille RM055 Super Clone delivers the Bubba Watson tonneau identity in a white ATZ ceramic case with clear sapphire crystal accents framing the skeletonised dial, finished to 98% visual and dimensional parity with the genuine reference. This White Sapphire build pairs the RMUL2 clone hand-wound mechanical movement with a white rubber strap and titanium deployant buckle, priced at $2,000 against a genuine market figure above $135,000.

This RM 055 White Sapphire super clone uses a tonneau-shaped case measuring 49.94mm by 42.70mm with a 13.05mm height, built around a grade 5 titanium caseband, six polished titanium spline screws, and a white ATZ ceramic upper case. Clear sapphire framing replaces the opaque bezel sections of the standard ceramic build, opening up the architecture of the skeletonised dial and the white-toned bridges underneath. A Swiss-grade clone of the Richard Mille RMUL2 hand-wound mechanical movement drives timekeeping at 21,600 vibrations per hour with approximately 55 hours of power reserve. The RM 055 launched in 2010 as the Bubba Watson signature reference, and the White Sapphire interpretation reads as the most light-forward variant of the run, designed for buyers who want the sapphire-clear visual signature without leaving the white ceramic identity. The watch ships from a top-tier specialist factory that produces the complete watch, with a full quality control pass, insured worldwide delivery, and a 1-year limited warranty.

ReferenceRM 055 Bubba Watson White Sapphire
Case49.94mm x 42.70mm, white ATZ ceramic with sapphire crystal accents, grade 5 titanium caseband
DialSkeletonised with sapphire crystal framing and white-toned bridges
$2,000.00
In Stock - Limited Batch
Chat on WhatsApp Before Ordering
4-Stage QC
Verified factory
Insured Shipping
DHL · FedEx · 5–10 days
1-Year Warranty
Parts + servicing
Discreet Packaging
Signature required
SKU: RM-055-WHT-SAPH
Categories:
💳 VISA 💎 MasterCard 💰 PayPal 🍏 Apple Pay 🔒 SSL Secure

Richard Mille RM 055 Super Clone: Bubba Watson White Sapphire Skeleton Dial Overview

The Richard Mille RM 055 is the Bubba Watson signature tonneau sports watch, built here with a white ATZ ceramic case, clear sapphire crystal framing, a grade 5 titanium caseband, and a skeletonised dial reading against white-toned bridges. This super clone tracks the RM 055 reference through a 49.94mm by 42.70mm case, six titanium spline screws, and a white rubber strap with a titanium deployant buckle for $2,000. The tonneau geometry, the bridge layout under the skeleton dial, the sapphire accent rings, and the case finish follow the genuine reference within tight production tolerance.

Case & Crystal

Tonneau Case Profile and Sapphire Framing 49.94mm White ATZ Ceramic Build

The RM 055 White Sapphire super clone carries a tonneau case measuring 49.94mm long by 42.70mm wide and 13.05mm thick, machined to the curved Richard Mille silhouette that the Bubba Watson reference defined. White ATZ ceramic forms the primary upper case, and clear sapphire crystal framing opens the bezel and accent rings to let light pass through to the dial architecture. A grade 5 titanium caseband links the upper ceramic shell to the sapphire caseback ring, holding the structural rigidity of the build. Six polished titanium spline screws thread through the bezel and tie into the engineered visual language of the RM 055. The screw-down crown sits at 2 o'clock and seals the case for water resistance to 50 meters.

White ATZ Ceramic, Sapphire Crystal Accents and Grade 5 Titanium

The white ATZ ceramic upper case of the RM 055 White Sapphire build delivers a hard, scratch-resistant surface that holds its colour across long-term wear. ATZ ceramic, an alumina-toughened zirconia composite, sits among the hardest engineered materials used in modern watchmaking and gives the case the matte white finish buyers expect from the Bubba Watson reference. The clear sapphire crystal accents bring a transparent architectural layer that the standard white ceramic variant does not carry, which is the defining visual cue of this White Sapphire build. The grade 5 titanium caseband provides a strong, light core that keeps the watch under 100 grams on the rubber strap. This super clone follows the genuine ceramic-and-sapphire construction so the RM 055 reads correctly under close inspection on weight, surface texture, edge geometry, and light transmission.

Front Sapphire Crystal and Sapphire Caseback

Scratch-resistant sapphire crystal with anti-reflective coating covers the skeletonised dial and lets full light through to the open bridges and the gear train below. The curved front sapphire follows the tonneau profile and stays clear under angled light, which is a signature look of the RM 055 across every variant. The sapphire caseback shows the hand-wound clone movement from below, including the visible mainspring barrel, the train wheels, and the grade 5 titanium bridges. The screw-down crown at 2 o'clock supports the 50-meter water resistance of the reference through daily wear and hand washing contact.

Dial & Markers

Skeletonised Dial with Sapphire Accent Architecture

The skeletonised dial of this RM055 Super Clone shows the movement bridges, the mainspring barrel, and the gear train from the front, with no traditional dial plate covering the architecture. The clear sapphire accent framing extends the open visual language outward from the central dial, which gives the White Sapphire variant a stronger sense of depth than the all-ceramic interpretation of the same reference. The signature visual identity of every Richard Mille sports reference lives in this open architecture, and this super clone matches the bridge cut-out shape, the satin finishing on the white-toned bridges, and the layered transparency the genuine White Sapphire build delivers.

White-Toned Bridges, Applied Branding and Hand Set

The RM 055 White Sapphire carries white-toned bridges visible through the open dial, with the applied "Richard Mille" branding placed on the upper bridge in keeping with the maison's signature dial layout. The skeleton hour and minute hands run in skeletonised baton form, matching the open dial language and giving a clear time reading against the bright bridge plates. A central seconds hand reads in the same skeleton style for visual consistency. The branding placement, the bridge finishing, and the hand profile follow the White Sapphire reference layout, including the upper-bridge logo position that collectors check first.

Tonneau Layout, Legibility and Light Play

The tonneau case shape extends the dial vertically, which gives the skeletonised display extra real estate for the visible movement architecture and the sapphire accent rings. The skeleton hour and minute hands stay legible against the white-toned bridges through the contrast between satin finishing and polished hand surfaces, and the printed minute track around the outer chapter ring supports precise reading. The sapphire framing lets ambient light pass through the case at angles that the opaque ceramic variants block, which gives the RM 055 White Sapphire a different wrist character through the day depending on the light source.

Movement & Specifications

Swiss-Grade RMUL2 Clone Hand-Wound Skeleton Movement

The Richard Mille RM 055 White Sapphire super clone runs on a Swiss-grade hand-wound mechanical movement engineered to match the genuine Richard Mille RMUL2 caliber in feel, frequency, and architecture. The movement operates at 21,600 vibrations per hour, winds by hand through the 2 o'clock crown, and holds a power reserve of approximately 55 hours, which covers over two days off the wrist. The caliber drives the central hours, minutes, and seconds across a grade 5 titanium baseplate and grade 5 titanium bridges, the same architectural choice the genuine RMUL2 uses for shock resistance and weight reduction across the sport-watch line.

Accuracy, Shock Resistance and Daily Performance

Daily deviation holds within -5 to +8 seconds per day after factory regulation on the RM055 Super Clone, close to the chronometer band that buyers expect from a Swiss-grade hand-wound build. The grade 5 titanium baseplate and bridges give the movement a strong, light core that handles shock during sport use, which is the architectural reasoning behind the genuine RMUL2 caliber. The 50-meter water resistance and the screw-down crown let the RM 055 White Sapphire hold its seal through daily wear, hand washing, and light water contact, in line with the active-wear positioning of the Bubba Watson reference. The skeleton bridge layout also helps the buyer monitor the mainspring barrel state at a glance, which is a practical advantage of a hand-wound build.

Spec grid:

TypeHand-wound mechanical, skeleton
Frequency21,600 vph (3 Hz)
Power ReserveApproximately 55 hours
BaseplateGrade 5 titanium
BridgesGrade 5 titanium, satin finished
FunctionsHours, minutes, seconds
Strap & Clasp

White Rubber Strap and Titanium Deployant Buckle

The RM 055 White Sapphire super clone carries a white rubber strap, the strap style Richard Mille pairs with the white-cased Bubba Watson references. The strap uses a soft, flexible rubber compound that holds its shape across long-term wear, with integrated lugs that flow into the tonneau case for the continuous Richard Mille silhouette. A titanium deployant buckle closes flush against the wrist for a secure hold and lets the buyer remove the watch without flexing the strap repeatedly. The titanium clasp matches the grade 5 caseband on tone and finish, which keeps the visual language consistent from case to wrist. The RM 055 uses the white rubber strap on this White Sapphire variant and not a metal bracelet.

Wrist Feel, Sizing and Comfort

The watch weighs approximately 92 grams on the full white rubber strap, which gives the RM 055 White Sapphire the light wrist presence buyers expect from a ceramic, sapphire, and titanium Richard Mille build. The 49.94mm by 42.70mm tonneau case wears closer to a 44mm round watch on the wrist due to the curved geometry, and the slim 13.05mm height clears most shirt cuffs without snagging. The Bubba Watson White Sapphire sits comfortably on wrists from 6.5 to 8 inches with the deployant buckle adjusted across the strap holes. The rubber strap also handles sweat and humid weather better than leather or fabric, which suits the active wear case the reference was designed for.

Tonneau Case Profile and Sapphire Framing 49.94mm White ATZ Ceramic Build

The RM 055 White Sapphire super clone carries a tonneau case measuring 49.94mm long by 42.70mm wide and 13.05mm thick, machined to the curved Richard Mille silhouette that the Bubba Watson reference defined. White ATZ ceramic forms the primary upper case, and clear sapphire crystal framing opens the bezel and accent rings to let light pass through to the dial architecture. A grade 5 titanium caseband links the upper ceramic shell to the sapphire caseback ring, holding the structural rigidity of the build. Six polished titanium spline screws thread through the bezel and tie into the engineered visual language of the RM 055. The screw-down crown sits at 2 o'clock and seals the case for water resistance to 50 meters.

White ATZ Ceramic, Sapphire Crystal Accents and Grade 5 Titanium

The white ATZ ceramic upper case of the RM 055 White Sapphire build delivers a hard, scratch-resistant surface that holds its colour across long-term wear. ATZ ceramic, an alumina-toughened zirconia composite, sits among the hardest engineered materials used in modern watchmaking and gives the case the matte white finish buyers expect from the Bubba Watson reference. The clear sapphire crystal accents bring a transparent architectural layer that the standard white ceramic variant does not carry, which is the defining visual cue of this White Sapphire build. The grade 5 titanium caseband provides a strong, light core that keeps the watch under 100 grams on the rubber strap. This super clone follows the genuine ceramic-and-sapphire construction so the RM 055 reads correctly under close inspection on weight, surface texture, edge geometry, and light transmission.

Front Sapphire Crystal and Sapphire Caseback

Scratch-resistant sapphire crystal with anti-reflective coating covers the skeletonised dial and lets full light through to the open bridges and the gear train below. The curved front sapphire follows the tonneau profile and stays clear under angled light, which is a signature look of the RM 055 across every variant. The sapphire caseback shows the hand-wound clone movement from below, including the visible mainspring barrel, the train wheels, and the grade 5 titanium bridges. The screw-down crown at 2 o'clock supports the 50-meter water resistance of the reference through daily wear and hand washing contact.

Skeletonised Dial with Sapphire Accent Architecture

The skeletonised dial of this RM055 Super Clone shows the movement bridges, the mainspring barrel, and the gear train from the front, with no traditional dial plate covering the architecture. The clear sapphire accent framing extends the open visual language outward from the central dial, which gives the White Sapphire variant a stronger sense of depth than the all-ceramic interpretation of the same reference. The signature visual identity of every Richard Mille sports reference lives in this open architecture, and this super clone matches the bridge cut-out shape, the satin finishing on the white-toned bridges, and the layered transparency the genuine White Sapphire build delivers.

White-Toned Bridges, Applied Branding and Hand Set

The RM 055 White Sapphire carries white-toned bridges visible through the open dial, with the applied "Richard Mille" branding placed on the upper bridge in keeping with the maison's signature dial layout. The skeleton hour and minute hands run in skeletonised baton form, matching the open dial language and giving a clear time reading against the bright bridge plates. A central seconds hand reads in the same skeleton style for visual consistency. The branding placement, the bridge finishing, and the hand profile follow the White Sapphire reference layout, including the upper-bridge logo position that collectors check first.

Tonneau Layout, Legibility and Light Play

The tonneau case shape extends the dial vertically, which gives the skeletonised display extra real estate for the visible movement architecture and the sapphire accent rings. The skeleton hour and minute hands stay legible against the white-toned bridges through the contrast between satin finishing and polished hand surfaces, and the printed minute track around the outer chapter ring supports precise reading. The sapphire framing lets ambient light pass through the case at angles that the opaque ceramic variants block, which gives the RM 055 White Sapphire a different wrist character through the day depending on the light source.

Swiss-Grade RMUL2 Clone Hand-Wound Skeleton Movement

The Richard Mille RM 055 White Sapphire super clone runs on a Swiss-grade hand-wound mechanical movement engineered to match the genuine Richard Mille RMUL2 caliber in feel, frequency, and architecture. The movement operates at 21,600 vibrations per hour, winds by hand through the 2 o'clock crown, and holds a power reserve of approximately 55 hours, which covers over two days off the wrist. The caliber drives the central hours, minutes, and seconds across a grade 5 titanium baseplate and grade 5 titanium bridges, the same architectural choice the genuine RMUL2 uses for shock resistance and weight reduction across the sport-watch line.

Accuracy, Shock Resistance and Daily Performance

Daily deviation holds within -5 to +8 seconds per day after factory regulation on the RM055 Super Clone, close to the chronometer band that buyers expect from a Swiss-grade hand-wound build. The grade 5 titanium baseplate and bridges give the movement a strong, light core that handles shock during sport use, which is the architectural reasoning behind the genuine RMUL2 caliber. The 50-meter water resistance and the screw-down crown let the RM 055 White Sapphire hold its seal through daily wear, hand washing, and light water contact, in line with the active-wear positioning of the Bubba Watson reference. The skeleton bridge layout also helps the buyer monitor the mainspring barrel state at a glance, which is a practical advantage of a hand-wound build.

Spec grid:

TypeHand-wound mechanical, skeleton
Frequency21,600 vph (3 Hz)
Power ReserveApproximately 55 hours
BaseplateGrade 5 titanium
BridgesGrade 5 titanium, satin finished
FunctionsHours, minutes, seconds

White Rubber Strap and Titanium Deployant Buckle

The RM 055 White Sapphire super clone carries a white rubber strap, the strap style Richard Mille pairs with the white-cased Bubba Watson references. The strap uses a soft, flexible rubber compound that holds its shape across long-term wear, with integrated lugs that flow into the tonneau case for the continuous Richard Mille silhouette. A titanium deployant buckle closes flush against the wrist for a secure hold and lets the buyer remove the watch without flexing the strap repeatedly. The titanium clasp matches the grade 5 caseband on tone and finish, which keeps the visual language consistent from case to wrist. The RM 055 uses the white rubber strap on this White Sapphire variant and not a metal bracelet.

Wrist Feel, Sizing and Comfort

The watch weighs approximately 92 grams on the full white rubber strap, which gives the RM 055 White Sapphire the light wrist presence buyers expect from a ceramic, sapphire, and titanium Richard Mille build. The 49.94mm by 42.70mm tonneau case wears closer to a 44mm round watch on the wrist due to the curved geometry, and the slim 13.05mm height clears most shirt cuffs without snagging. The Bubba Watson White Sapphire sits comfortably on wrists from 6.5 to 8 inches with the deployant buckle adjusted across the strap holes. The rubber strap also handles sweat and humid weather better than leather or fabric, which suits the active wear case the reference was designed for.

Case & Crystal

Tonneau Case Profile and Sapphire Framing 49.94mm White ATZ Ceramic Build

The RM 055 White Sapphire super clone carries a tonneau case measuring 49.94mm long by 42.70mm wide and 13.05mm thick, machined to the curved Richard Mille silhouette that the Bubba Watson reference defined. White ATZ ceramic forms the primary upper case, and clear sapphire crystal framing opens the bezel and accent rings to let light pass through to the dial architecture. A grade 5 titanium caseband links the upper ceramic shell to the sapphire caseback ring, holding the structural rigidity of the build. Six polished titanium spline screws thread through the bezel and tie into the engineered visual language of the RM 055. The screw-down crown sits at 2 o'clock and seals the case for water resistance to 50 meters.

White ATZ Ceramic, Sapphire Crystal Accents and Grade 5 Titanium

The white ATZ ceramic upper case of the RM 055 White Sapphire build delivers a hard, scratch-resistant surface that holds its colour across long-term wear. ATZ ceramic, an alumina-toughened zirconia composite, sits among the hardest engineered materials used in modern watchmaking and gives the case the matte white finish buyers expect from the Bubba Watson reference. The clear sapphire crystal accents bring a transparent architectural layer that the standard white ceramic variant does not carry, which is the defining visual cue of this White Sapphire build. The grade 5 titanium caseband provides a strong, light core that keeps the watch under 100 grams on the rubber strap. This super clone follows the genuine ceramic-and-sapphire construction so the RM 055 reads correctly under close inspection on weight, surface texture, edge geometry, and light transmission.

Front Sapphire Crystal and Sapphire Caseback

Scratch-resistant sapphire crystal with anti-reflective coating covers the skeletonised dial and lets full light through to the open bridges and the gear train below. The curved front sapphire follows the tonneau profile and stays clear under angled light, which is a signature look of the RM 055 across every variant. The sapphire caseback shows the hand-wound clone movement from below, including the visible mainspring barrel, the train wheels, and the grade 5 titanium bridges. The screw-down crown at 2 o'clock supports the 50-meter water resistance of the reference through daily wear and hand washing contact.

Dial & Markers

Skeletonised Dial with Sapphire Accent Architecture

The skeletonised dial of this RM055 Super Clone shows the movement bridges, the mainspring barrel, and the gear train from the front, with no traditional dial plate covering the architecture. The clear sapphire accent framing extends the open visual language outward from the central dial, which gives the White Sapphire variant a stronger sense of depth than the all-ceramic interpretation of the same reference. The signature visual identity of every Richard Mille sports reference lives in this open architecture, and this super clone matches the bridge cut-out shape, the satin finishing on the white-toned bridges, and the layered transparency the genuine White Sapphire build delivers.

White-Toned Bridges, Applied Branding and Hand Set

The RM 055 White Sapphire carries white-toned bridges visible through the open dial, with the applied "Richard Mille" branding placed on the upper bridge in keeping with the maison's signature dial layout. The skeleton hour and minute hands run in skeletonised baton form, matching the open dial language and giving a clear time reading against the bright bridge plates. A central seconds hand reads in the same skeleton style for visual consistency. The branding placement, the bridge finishing, and the hand profile follow the White Sapphire reference layout, including the upper-bridge logo position that collectors check first.

Tonneau Layout, Legibility and Light Play

The tonneau case shape extends the dial vertically, which gives the skeletonised display extra real estate for the visible movement architecture and the sapphire accent rings. The skeleton hour and minute hands stay legible against the white-toned bridges through the contrast between satin finishing and polished hand surfaces, and the printed minute track around the outer chapter ring supports precise reading. The sapphire framing lets ambient light pass through the case at angles that the opaque ceramic variants block, which gives the RM 055 White Sapphire a different wrist character through the day depending on the light source.

Movement & Specifications

Swiss-Grade RMUL2 Clone Hand-Wound Skeleton Movement

The Richard Mille RM 055 White Sapphire super clone runs on a Swiss-grade hand-wound mechanical movement engineered to match the genuine Richard Mille RMUL2 caliber in feel, frequency, and architecture. The movement operates at 21,600 vibrations per hour, winds by hand through the 2 o'clock crown, and holds a power reserve of approximately 55 hours, which covers over two days off the wrist. The caliber drives the central hours, minutes, and seconds across a grade 5 titanium baseplate and grade 5 titanium bridges, the same architectural choice the genuine RMUL2 uses for shock resistance and weight reduction across the sport-watch line.

Accuracy, Shock Resistance and Daily Performance

Daily deviation holds within -5 to +8 seconds per day after factory regulation on the RM055 Super Clone, close to the chronometer band that buyers expect from a Swiss-grade hand-wound build. The grade 5 titanium baseplate and bridges give the movement a strong, light core that handles shock during sport use, which is the architectural reasoning behind the genuine RMUL2 caliber. The 50-meter water resistance and the screw-down crown let the RM 055 White Sapphire hold its seal through daily wear, hand washing, and light water contact, in line with the active-wear positioning of the Bubba Watson reference. The skeleton bridge layout also helps the buyer monitor the mainspring barrel state at a glance, which is a practical advantage of a hand-wound build.

Spec grid:

TypeHand-wound mechanical, skeleton
Frequency21,600 vph (3 Hz)
Power ReserveApproximately 55 hours
BaseplateGrade 5 titanium
BridgesGrade 5 titanium, satin finished
FunctionsHours, minutes, seconds
Strap & Clasp

White Rubber Strap and Titanium Deployant Buckle

The RM 055 White Sapphire super clone carries a white rubber strap, the strap style Richard Mille pairs with the white-cased Bubba Watson references. The strap uses a soft, flexible rubber compound that holds its shape across long-term wear, with integrated lugs that flow into the tonneau case for the continuous Richard Mille silhouette. A titanium deployant buckle closes flush against the wrist for a secure hold and lets the buyer remove the watch without flexing the strap repeatedly. The titanium clasp matches the grade 5 caseband on tone and finish, which keeps the visual language consistent from case to wrist. The RM 055 uses the white rubber strap on this White Sapphire variant and not a metal bracelet.

Wrist Feel, Sizing and Comfort

The watch weighs approximately 92 grams on the full white rubber strap, which gives the RM 055 White Sapphire the light wrist presence buyers expect from a ceramic, sapphire, and titanium Richard Mille build. The 49.94mm by 42.70mm tonneau case wears closer to a 44mm round watch on the wrist due to the curved geometry, and the slim 13.05mm height clears most shirt cuffs without snagging. The Bubba Watson White Sapphire sits comfortably on wrists from 6.5 to 8 inches with the deployant buckle adjusted across the strap holes. The rubber strap also handles sweat and humid weather better than leather or fabric, which suits the active wear case the reference was designed for.

Heritage, Comparison and Ownership Details

This section covers the lineage, cross-reference decisions, QC process, and post-purchase logistics for the Richard Mille RM 055 Super Clone: Bubba Watson White Sapphire Skeleton Dial.
RM 055 White Sapphire vs RM 055 White Ceramic vs RM 055 Black Ceramic Which Bubba Watson Variant to Buy

The Richard Mille RM 055 family includes several material and visual variants, and the White Sapphire build holds the most light-forward Bubba Watson identity of the three closest options. The comparison of three RM 055 variants is listed below.

Variant Case Material Visual Signature Movement Super Clone Price
RM 055 White Sapphire (this reference) White ATZ ceramic + sapphire accents + Ti caseband Open, light-forward, layered transparency RMUL2 clone hand-wound $2,000
RM 055 White Ceramic White ATZ ceramic + Ti caseband Clean matte white, opaque framing RMUL2 clone hand-wound $1,799
RM 055 Black Ceramic Black ATZ ceramic + Ti caseband Stealth, low contrast RMUL2 clone hand-wound $1,799

Buyers select the RM 055 White Sapphire for the layered transparency the clear sapphire framing brings to the Bubba Watson identity, which the opaque ceramic variants cannot match. The standard White Ceramic buyer prefers the cleaner matte tonneau silhouette without the additional sapphire framing detail. The Black Ceramic buyer chooses the stealth profile and the lower visual contrast of the dark case. The White Sapphire Super Clone gives the original Bubba Watson tonneau proportions with the skeletonised dial and the sapphire-accented signature that defines the most light-forward variant of the run.

Heritage Richard Mille and the RM 055 Bubba Watson White Sapphire

Richard Mille launched the Richard Mille brand in 2001 with the RM 001, the first tonneau-shaped sports watch built around a grade 5 titanium baseplate and a fully visible movement architecture. The brand positioned every reference as a "racing machine for the wrist" and tied each release to a sport athlete, which is the signature commercial model of the maison. Richard Mille released the RM 055 in 2010 as the signature reference of Bubba Watson, the American golfer who went on to win the Masters Tournament in 2012 and 2014 with the RM 055 on his wrist during play. The reference set the tonneau sports watch category for golf use, paired with a hand-wound skeleton mechanical movement, the RMUL2, built on a grade 5 titanium baseplate and bridges. The White Sapphire interpretation arrived as a light-forward visual reading of the same architecture, designed for buyers who wanted the open transparency of sapphire framing layered onto the white ceramic Bubba Watson identity. This RM 055 Super Clone carries that collaboration heritage and the proven Richard Mille tonneau architecture onto the wrist at a fraction of the original-market price.

Authenticity of Build, 4-Stage QC and What's in the Box

Every Richard Mille RM 055 White Sapphire super clone passes a four-stage quality control sequence before shipping. The 4 QC steps are listed below.

  • Alignment check: Bridge placement, marker position, sapphire accent seating, and "Richard Mille" branding alignment verified against genuine reference photos.
  • Movement testing: Hand winding, hand setting, and 21,600-vph frequency confirmed on a timegrapher.
  • Finishing inspection: Ceramic surface finish, sapphire crystal clarity, titanium caseband edges, spline screw seating, and deployant buckle action reviewed under magnification.
  • Performance validation: Power reserve, accuracy, crown seal, and water-resistance pressure tested.

The Bubba Watson White Sapphire ships in secure, discreet packaging to protect your privacy. The full package contents are listed below.

  1. Watch: Richard Mille RM 055 White Sapphire super clone
  2. Presentation box: Richard Mille-style box set
  3. Travel pouch: outer protective pouch
  4. Booklet: owner's manual
  5. Warranty card: warranty card
  6. Extras: polishing cloth and 1 spare strap tool
Shipping, Warranty and Aftercare

The RM 055 White Sapphire super clone ships within 24 hours of order confirmation via DHL Express or FedEx Priority with full insurance and discreet packaging. Worldwide delivery lands in 5 to 10 business days across the USA, UK, UAE, India, and Europe. Every watch carries a 1-year limited warranty covering movement defects, with replacement-parts support and servicing guidance provided after purchase. The 4 support channels for the RM055 Super Clone are listed below.

  • WhatsApp: Pre-sale consultation and post-sale assistance
  • Email: Support with a 24-hour response window through sales@superclonewatches.com
  • Live chat: Available on superclonewatches.com during business hours
  • Parts: Replacement parts sourcing through the originating factory

Related Richard Mille RM 055 Super Clone: Bubba Watson White Sapphire Skeleton Dial Super Clones

Richard Mille RM 055 Super Clone: Bubba Watson Black Ceramic Skeleton Dial

Richard Mille RM 055 Super Clone: Bubba Watson Black Ceramic Skeleton Dial

$2,000.00
Richard Mille RM 055 Super Clone Bubba Watson: Standard White ATZ Ceramic

Richard Mille RM 055 Super Clone Bubba Watson: Standard White ATZ Ceramic

$1,799.00
Richard Mille Super Clone Pablo Mac Donough

Richard Mille Super Clone Pablo Mac Donough

$2,650.00
Richard Mille RM 055 Super Clone : White Ceramic Bubba Watson Skeleton Dial

Richard Mille RM 055 Super Clone : White Ceramic Bubba Watson Skeleton Dial

$1,799.00

Verified Customer Reviews

Real owners of the Richard Mille RM 055 White Sapphire super clone share the wrist-side verdict. Ratings average 4.9 / 5 across 157 verified orders.

★★★★★

The sapphire framing changes the watch in daylight

"I already owned the standard white ceramic RM 055 super clone and wanted a second variant that read different on the wrist. The White Sapphire build does exactly that. In bright daylight the clear accent framing catches light at angles the opaque ceramic does not, and the skeleton bridges underneath look brighter. At $2,000 it sits between the standard ceramic and the genuine market price by a wide margin."
MT Marcus T. · Verified buyer · Dubai
★★★★★

Lightest 49mm tonneau I have worn

"The case dimensions look enormous on paper but the titanium caseband and the curved tonneau geometry make it sit closer to a 44mm round on a 7-inch wrist. The white rubber strap and the titanium deployant buckle keep the whole package under 100 grams. Hand winding is smooth and the power reserve holds past two days every time."
JK Jonathan K. · Verified buyer · New York
★★★★★

Pre-sale WhatsApp closed the deal

"I asked a long list of questions about the RMUL2 clone movement and how the sapphire accents are seated into the ceramic case. The team answered every one with photos before I ordered. The watch arrived in seven days via DHL in secure, discreet packaging with the full box set, booklet, and warranty card. First Richard Mille for me and zero buyer's remorse."
RS Rahul S. · Verified buyer · Mumbai
FAQ

Frequently Asked Questions

Every question below is answered with direct context covering super clone basics, quality, choosing the right reference, and orders & support.

Is the Richard Mille RM 055 White Sapphire a 1:1 super clone?+

Yes, the Richard Mille RM 055 White Sapphire sold on Super Clone Watches is a 1:1 super clone that matches the genuine Bubba Watson White Sapphire reference at 98% visual and dimensional accuracy. The build matches the white ATZ ceramic primary case, the clear sapphire accent framing, the grade 5 titanium caseband, the six titanium spline screws, the skeletonised dial with white-toned bridges, the applied "Richard Mille" upper-bridge branding, and the white rubber strap with titanium deployant buckle within tight tolerance. The price of $2,000 compares to a genuine market figure above $135,000.

When did Richard Mille release the RM 055 Bubba Watson?+

Richard Mille released the RM 055 in 2010 as the signature reference of Masters-winning golfer Bubba Watson. The reference defined the tonneau sports watch category for golf use, and Bubba Watson wore the white ceramic version during his 2012 and 2014 Masters Tournament victories. The White Sapphire build follows the same case architecture as the original white ceramic release, with clear sapphire accent framing added to the bezel layout for a more light-forward visual reading of the Bubba Watson identity.

How water resistant is the RM 055 White Sapphire?+

The Richard Mille RM 055 White Sapphire holds water resistance to 50 meters, which covers daily wear, hand washing, and light splash contact. The white ATZ ceramic primary case, the sapphire accent seating, the grade 5 titanium caseband, and the screw-down crown at 2 o'clock seal the watch against everyday water contact. This super clone passes a water-resistance pressure test during quality control to confirm the seal before shipping.

How is the watch shipped internationally?+

The RM 055 Bubba Watson White Sapphire ships via DHL Express or FedEx Priority with full insurance and tracked, signature-required delivery. The watch travels in secure, discreet packaging to protect your privacy. Transit time runs 5 to 10 business days to the USA, UK, UAE, India, and Europe, and the shipping cost is included in the price.

What movement powers this RM055 Super Clone?+

A Swiss-grade hand-wound mechanical skeleton clone of the Richard Mille RMUL2 caliber powers this RM 055 White Sapphire super clone. The movement runs at 21,600 vibrations per hour, holds a power reserve of approximately 55 hours, and drives the hours, minutes, and seconds across a grade 5 titanium baseplate and bridges. Performance matches the genuine caliber on frequency, architecture, and autonomy, with a smooth seconds hand and a precise crown-winding feel at the 2 o'clock position.

How does the White Sapphire differ from the standard White Ceramic RM 055?+

The White Sapphire differs from the standard White Ceramic RM 055 mainly in the bezel and accent ring construction, not in the movement or the dimensions. The White Sapphire build uses clear sapphire crystal framing layered onto the white ATZ ceramic primary case, which lets light pass through to the dial architecture at angles the opaque white ceramic variant blocks. Both variants share the 49.94mm by 42.70mm tonneau case, the grade 5 titanium caseband, the six titanium spline screws, the RMUL2 hand-wound clone movement, the skeletonised dial, and the white rubber strap with titanium deployant buckle.

What is the price difference vs the authentic Richard Mille RM 055 White Sapphire?+

The authentic Richard Mille RM 055 trades above $135,000 on the secondary market, since Richard Mille produced the reference in limited runs across the early 2010s with the sapphire-accented variant carrying its own premium. This White Sapphire super clone sells for $2,000, which delivers 98% visual and functional parity at roughly 1.5% of the genuine market price. Buyers receive the full Bubba Watson tonneau wrist presence and the sapphire-accented Richard Mille identity without the six-figure capital commitment.

What warranty is included with the RM055 Super Clone?+

A 1-year limited warranty covers movement defects and manufacturing faults on this RM 055 White Sapphire super clone. Replacement parts sourcing runs through the originating factory via Super Clone Watches support. Movement servicing guidance is provided through WhatsApp and email at sales@superclonewatches.com for the lifetime of the watch.