Richard Mille RM 055 Super Clone Bubba Watson: Standard White ATZ Ceramic

The Richard Mille RM 055 Bubba Watson super clone arrives in the standard catalogue configuration with a white ATZ ceramic tonneau case, a grade 5 titanium caseband, a fully skeletonised dial, and a white rubber strap, all rendered at 98% visual and dimensional parity to the genuine reference. This headline RM 055 listing carries a hand-wound mechanical clone of the RMUL2 caliber with a 55-hour power reserve, sells at $1,799, and compares to a six-figure secondary-market figure on the original.

This catalogue-standard Bubba Watson Super Clone follows the canonical RM 055 production specification across every contact point. The tonneau case measures 49.94mm long, 42.70mm wide, and 13.05mm thick, machined from white ATZ ceramic for the bezel and caseback ring and from grade 5 titanium for the central caseband. Six titanium spline screws ring the bezel and hold the case sandwich together, and the screw-down crown at 2 o’clock seals the watch to 50 meters. Inside, a Swiss-grade clone of the RMUL2 hand-wound skeleton movement drives the hours, minutes, and seconds at 21,600 vibrations per hour with a 55-hour power reserve. Richard Mille launched the RM 055 in 2010 as the signature reference of Masters-winning golfer Bubba Watson, and the white ATZ ceramic configuration became the headline production model of the collection. This RM 055 Super Clone tracks that headline configuration on case geometry, bridge layout, skeleton dial architecture, and strap pairing. The watch is sourced from a top-tier specialist factory that produces the complete watch, ships with full quality control, insured worldwide delivery, and a 1-year limited warranty.

ReferenceRM 055 Bubba Watson — Standard White Ceramic
Case49.94mm x 42.70mm x 13.05mm, white ATZ ceramic with grade 5 titanium caseband
DialFully skeletonised with applied "Richard Mille" branding on the upper bridge
$1,799.00
In Stock - Limited Batch
Chat on WhatsApp Before Ordering
4-Stage QC
Verified factory
Insured Shipping
DHL · FedEx · 5–10 days
1-Year Warranty
Parts + servicing
Discreet Packaging
Signature required
SKU: RM-055-BW-STD
Categories:
💳 VISA 💎 MasterCard 💰 PayPal 🍏 Apple Pay 🔒 SSL Secure

Richard Mille RM 055 Super Clone Bubba Watson: Standard White ATZ Ceramic Overview

The Richard Mille RM 055 in standard white ATZ ceramic is the canonical Bubba Watson tonneau, the configuration that defined the reference at launch and continues to set the visual benchmark for the RM 055 family. This super clone holds the headline production specification on every measurable surface: the 49.94mm by 42.70mm tonneau case, the white ATZ ceramic bezel and caseback ring, the grade 5 titanium central band, the six titanium spline screws, the fully skeletonised dial with the upper-bridge "Richard Mille" signature, and the white rubber strap with titanium deployant buckle. The price of $1,799 places this canonical Bubba Watson configuration within reach of buyers who want the original signature variant of the RM 055 rather than a colour or material derivative.

Case & Crystal

Tonneau Case Geometry 49.94mm by 42.70mm by 13.05mm

The RM 055 Super Clone case follows the signature Richard Mille tonneau silhouette, with vertical lines that curve outward through the mid-case and pinch back in at the integrated lugs. Total dimensions land at 49.94mm long, 42.70mm wide, and 13.05mm thick, the canonical measurements that the genuine Bubba Watson reference established in 2010. The case sandwich uses a tri-component construction: a white ATZ ceramic upper bezel, a grade 5 titanium central caseband, and a matching ceramic caseback ring, with six titanium spline screws holding the assembly under torque. The crown sits at 2 o'clock in the signature Richard Mille position, machined from titanium with the RM cross-logo pattern, and screws down to seal the watch to 50 meters.

White ATZ Ceramic Bezel and Grade 5 Titanium Caseband

The white ATZ ceramic surface gives this Bubba Watson Super Clone its headline visual identity. ATZ, short for alumina-toughened zirconia, sits among the hardest engineered ceramics in watchmaking and holds its bright matte white finish through years of daily wear without yellowing, scratching, or surface fade. The grade 5 titanium caseband carries the structural load of the case, keeps total wrist weight under 100 grams, and gives the watch the thermal-neutral feel buyers expect from a genuine Richard Mille sports reference. The polished spline-screw heads ring the bezel and tie into the engineered industrial look of the RM 055.

Sapphire Crystal, Sapphire Caseback and 50-Meter Sealing

A curved sapphire crystal with anti-reflective coating covers the skeletonised dial and follows the tonneau profile from edge to edge, holding clarity at every viewing angle. The sapphire caseback opens a full view onto the hand-wound skeleton clone movement, the satin-finished bridges, and the mainspring barrel. The screw-down crown at 2 o'clock, combined with the gasket-sealed caseback, holds the RM 055 to 50 meters of water resistance for daily wear, hand washing, and light water contact during sport use.

Dial & Markers

Fully Skeletonised Dial with Open Bridge Architecture

The RM 055 dial is fully skeletonised: no dial plate covers the movement, and the buyer reads the time through the open architecture of the satin-finished titanium bridges below. The bridge cut-outs follow the canonical Richard Mille geometry, with the upper bridge carrying the applied "Richard Mille" branding in raised metal lettering and the lower bridges framing the gear train and the mainspring barrel. This Bubba Watson Super Clone matches the bridge silhouettes, the chamfered edges, and the satin surface finish of the genuine white ceramic production.

Applied "Richard Mille" Branding and Skeletonised Hands

The upper bridge carries the applied "Richard Mille" wordmark in raised metal, the canonical brand signature of the reference. Skeleton hour and minute hands run in baton form with hollow centres for visual continuity with the open dial, and the central seconds hand carries the same skeletonised geometry. The chapter ring around the outer edge holds a printed minute track, and the applied hour markers are positioned at the 12, 3, 6, and 9 positions to anchor the time reading against the open bridges underneath.

Tonneau Display Real Estate and Daily Legibility

The vertical tonneau case shape extends the dial area along its longer axis, which gives the skeletonised architecture more visible real estate than a comparable round dial. Skeleton hands and applied markers stay legible against the satin bridges through metal-on-metal contrast, and the curved sapphire crystal holds clarity from straight-on, off-axis, and overhead viewing. The white ATZ ceramic bezel frames the dial without colour bleed, so the buyer's eye reads the movement architecture as the primary visual focus.

Movement & Specifications

Swiss-Grade RMUL2 Clone Hand-Wound Skeleton Mechanical Caliber

The Richard Mille RM 055 Super Clone runs on a Swiss-grade hand-wound mechanical movement engineered as a 1:1 clone of the genuine Richard Mille RMUL2 caliber. The movement winds by hand through the screw-down crown, drives the hours, minutes, and central seconds, and holds a power reserve of approximately 55 hours for over two days of autonomy off the wrist. The architecture mirrors the genuine RMUL2: a grade 5 titanium baseplate and bridges, a free-sprung balance, and a fully skeletonised layout that exposes the gear train and mainspring barrel through the front and the caseback. The 21,600 vibrations per hour frequency gives the central seconds hand the deliberate sweep that buyers associate with hand-wound Richard Mille sports calibers.

Accuracy, Shock Resistance and Wrist Performance

Daily deviation holds within -5 to +8 seconds per day after factory regulation, which lands close to the chronometer band that hand-wound Richard Mille buyers expect. The grade 5 titanium baseplate and bridges give the movement a strong, light, shock-resistant core, the same architectural reasoning Richard Mille applied to the genuine RMUL2 for use during golf swings, racket sport, and other high-impact wrist activity. The screw-down crown at 2 o'clock and the gasket-sealed caseback hold the 50-meter water rating through daily wear, hand washing, and light water exposure, in line with the Bubba Watson signature reference and its golf-course origin.

Spec grid:

TypeHand-wound mechanical, fully skeletonised
Caliber ReferenceSwiss-grade clone of the Richard Mille RMUL2
Frequency21,600 vph (3 Hz)
Power ReserveApproximately 55 hours
BaseplateGrade 5 titanium
BridgesGrade 5 titanium, satin finished
FunctionsHours, minutes, central seconds
Strap & Clasp

White Rubber Strap and Titanium Deployant Buckle

The standard Bubba Watson Super Clone ships on the canonical white rubber strap, the strap configuration Richard Mille pairs with the white ceramic production at launch. The strap uses a soft, flexible high-grade rubber compound that holds its shape across long-term wear, resists yellowing, and integrates cleanly into the tonneau case lugs for the continuous Richard Mille silhouette from 12 o'clock through 6 o'clock. A titanium deployant buckle closes flat against the wrist for a secure hold, lets the buyer put the watch on and take it off without flexing the rubber repeatedly, and adds a clean structural finish on the underside of the wrist.

Wrist Feel, Sizing and Daily Comfort

Total weight on the wrist lands at approximately 95 grams with the strap fitted, light for a watch of this case size and a direct result of the ceramic-and-titanium construction. The 49.94mm by 42.70mm tonneau case wears closer to a 44mm round watch on the wrist because the curved geometry follows the wrist line and the 13.05mm height clears most shirt cuffs without binding. The RM 055 Super Clone fits wrists from 6.5 inches through 8.25 inches through the deployant adjustment range, and the rubber strap softens to body temperature within a few minutes of putting the watch on.

Tonneau Case Geometry 49.94mm by 42.70mm by 13.05mm

The RM 055 Super Clone case follows the signature Richard Mille tonneau silhouette, with vertical lines that curve outward through the mid-case and pinch back in at the integrated lugs. Total dimensions land at 49.94mm long, 42.70mm wide, and 13.05mm thick, the canonical measurements that the genuine Bubba Watson reference established in 2010. The case sandwich uses a tri-component construction: a white ATZ ceramic upper bezel, a grade 5 titanium central caseband, and a matching ceramic caseback ring, with six titanium spline screws holding the assembly under torque. The crown sits at 2 o'clock in the signature Richard Mille position, machined from titanium with the RM cross-logo pattern, and screws down to seal the watch to 50 meters.

White ATZ Ceramic Bezel and Grade 5 Titanium Caseband

The white ATZ ceramic surface gives this Bubba Watson Super Clone its headline visual identity. ATZ, short for alumina-toughened zirconia, sits among the hardest engineered ceramics in watchmaking and holds its bright matte white finish through years of daily wear without yellowing, scratching, or surface fade. The grade 5 titanium caseband carries the structural load of the case, keeps total wrist weight under 100 grams, and gives the watch the thermal-neutral feel buyers expect from a genuine Richard Mille sports reference. The polished spline-screw heads ring the bezel and tie into the engineered industrial look of the RM 055.

Sapphire Crystal, Sapphire Caseback and 50-Meter Sealing

A curved sapphire crystal with anti-reflective coating covers the skeletonised dial and follows the tonneau profile from edge to edge, holding clarity at every viewing angle. The sapphire caseback opens a full view onto the hand-wound skeleton clone movement, the satin-finished bridges, and the mainspring barrel. The screw-down crown at 2 o'clock, combined with the gasket-sealed caseback, holds the RM 055 to 50 meters of water resistance for daily wear, hand washing, and light water contact during sport use.

Fully Skeletonised Dial with Open Bridge Architecture

The RM 055 dial is fully skeletonised: no dial plate covers the movement, and the buyer reads the time through the open architecture of the satin-finished titanium bridges below. The bridge cut-outs follow the canonical Richard Mille geometry, with the upper bridge carrying the applied "Richard Mille" branding in raised metal lettering and the lower bridges framing the gear train and the mainspring barrel. This Bubba Watson Super Clone matches the bridge silhouettes, the chamfered edges, and the satin surface finish of the genuine white ceramic production.

Applied "Richard Mille" Branding and Skeletonised Hands

The upper bridge carries the applied "Richard Mille" wordmark in raised metal, the canonical brand signature of the reference. Skeleton hour and minute hands run in baton form with hollow centres for visual continuity with the open dial, and the central seconds hand carries the same skeletonised geometry. The chapter ring around the outer edge holds a printed minute track, and the applied hour markers are positioned at the 12, 3, 6, and 9 positions to anchor the time reading against the open bridges underneath.

Tonneau Display Real Estate and Daily Legibility

The vertical tonneau case shape extends the dial area along its longer axis, which gives the skeletonised architecture more visible real estate than a comparable round dial. Skeleton hands and applied markers stay legible against the satin bridges through metal-on-metal contrast, and the curved sapphire crystal holds clarity from straight-on, off-axis, and overhead viewing. The white ATZ ceramic bezel frames the dial without colour bleed, so the buyer's eye reads the movement architecture as the primary visual focus.

Swiss-Grade RMUL2 Clone Hand-Wound Skeleton Mechanical Caliber

The Richard Mille RM 055 Super Clone runs on a Swiss-grade hand-wound mechanical movement engineered as a 1:1 clone of the genuine Richard Mille RMUL2 caliber. The movement winds by hand through the screw-down crown, drives the hours, minutes, and central seconds, and holds a power reserve of approximately 55 hours for over two days of autonomy off the wrist. The architecture mirrors the genuine RMUL2: a grade 5 titanium baseplate and bridges, a free-sprung balance, and a fully skeletonised layout that exposes the gear train and mainspring barrel through the front and the caseback. The 21,600 vibrations per hour frequency gives the central seconds hand the deliberate sweep that buyers associate with hand-wound Richard Mille sports calibers.

Accuracy, Shock Resistance and Wrist Performance

Daily deviation holds within -5 to +8 seconds per day after factory regulation, which lands close to the chronometer band that hand-wound Richard Mille buyers expect. The grade 5 titanium baseplate and bridges give the movement a strong, light, shock-resistant core, the same architectural reasoning Richard Mille applied to the genuine RMUL2 for use during golf swings, racket sport, and other high-impact wrist activity. The screw-down crown at 2 o'clock and the gasket-sealed caseback hold the 50-meter water rating through daily wear, hand washing, and light water exposure, in line with the Bubba Watson signature reference and its golf-course origin.

Spec grid:

TypeHand-wound mechanical, fully skeletonised
Caliber ReferenceSwiss-grade clone of the Richard Mille RMUL2
Frequency21,600 vph (3 Hz)
Power ReserveApproximately 55 hours
BaseplateGrade 5 titanium
BridgesGrade 5 titanium, satin finished
FunctionsHours, minutes, central seconds

White Rubber Strap and Titanium Deployant Buckle

The standard Bubba Watson Super Clone ships on the canonical white rubber strap, the strap configuration Richard Mille pairs with the white ceramic production at launch. The strap uses a soft, flexible high-grade rubber compound that holds its shape across long-term wear, resists yellowing, and integrates cleanly into the tonneau case lugs for the continuous Richard Mille silhouette from 12 o'clock through 6 o'clock. A titanium deployant buckle closes flat against the wrist for a secure hold, lets the buyer put the watch on and take it off without flexing the rubber repeatedly, and adds a clean structural finish on the underside of the wrist.

Wrist Feel, Sizing and Daily Comfort

Total weight on the wrist lands at approximately 95 grams with the strap fitted, light for a watch of this case size and a direct result of the ceramic-and-titanium construction. The 49.94mm by 42.70mm tonneau case wears closer to a 44mm round watch on the wrist because the curved geometry follows the wrist line and the 13.05mm height clears most shirt cuffs without binding. The RM 055 Super Clone fits wrists from 6.5 inches through 8.25 inches through the deployant adjustment range, and the rubber strap softens to body temperature within a few minutes of putting the watch on.

Case & Crystal

Tonneau Case Geometry 49.94mm by 42.70mm by 13.05mm

The RM 055 Super Clone case follows the signature Richard Mille tonneau silhouette, with vertical lines that curve outward through the mid-case and pinch back in at the integrated lugs. Total dimensions land at 49.94mm long, 42.70mm wide, and 13.05mm thick, the canonical measurements that the genuine Bubba Watson reference established in 2010. The case sandwich uses a tri-component construction: a white ATZ ceramic upper bezel, a grade 5 titanium central caseband, and a matching ceramic caseback ring, with six titanium spline screws holding the assembly under torque. The crown sits at 2 o'clock in the signature Richard Mille position, machined from titanium with the RM cross-logo pattern, and screws down to seal the watch to 50 meters.

White ATZ Ceramic Bezel and Grade 5 Titanium Caseband

The white ATZ ceramic surface gives this Bubba Watson Super Clone its headline visual identity. ATZ, short for alumina-toughened zirconia, sits among the hardest engineered ceramics in watchmaking and holds its bright matte white finish through years of daily wear without yellowing, scratching, or surface fade. The grade 5 titanium caseband carries the structural load of the case, keeps total wrist weight under 100 grams, and gives the watch the thermal-neutral feel buyers expect from a genuine Richard Mille sports reference. The polished spline-screw heads ring the bezel and tie into the engineered industrial look of the RM 055.

Sapphire Crystal, Sapphire Caseback and 50-Meter Sealing

A curved sapphire crystal with anti-reflective coating covers the skeletonised dial and follows the tonneau profile from edge to edge, holding clarity at every viewing angle. The sapphire caseback opens a full view onto the hand-wound skeleton clone movement, the satin-finished bridges, and the mainspring barrel. The screw-down crown at 2 o'clock, combined with the gasket-sealed caseback, holds the RM 055 to 50 meters of water resistance for daily wear, hand washing, and light water contact during sport use.

Dial & Markers

Fully Skeletonised Dial with Open Bridge Architecture

The RM 055 dial is fully skeletonised: no dial plate covers the movement, and the buyer reads the time through the open architecture of the satin-finished titanium bridges below. The bridge cut-outs follow the canonical Richard Mille geometry, with the upper bridge carrying the applied "Richard Mille" branding in raised metal lettering and the lower bridges framing the gear train and the mainspring barrel. This Bubba Watson Super Clone matches the bridge silhouettes, the chamfered edges, and the satin surface finish of the genuine white ceramic production.

Applied "Richard Mille" Branding and Skeletonised Hands

The upper bridge carries the applied "Richard Mille" wordmark in raised metal, the canonical brand signature of the reference. Skeleton hour and minute hands run in baton form with hollow centres for visual continuity with the open dial, and the central seconds hand carries the same skeletonised geometry. The chapter ring around the outer edge holds a printed minute track, and the applied hour markers are positioned at the 12, 3, 6, and 9 positions to anchor the time reading against the open bridges underneath.

Tonneau Display Real Estate and Daily Legibility

The vertical tonneau case shape extends the dial area along its longer axis, which gives the skeletonised architecture more visible real estate than a comparable round dial. Skeleton hands and applied markers stay legible against the satin bridges through metal-on-metal contrast, and the curved sapphire crystal holds clarity from straight-on, off-axis, and overhead viewing. The white ATZ ceramic bezel frames the dial without colour bleed, so the buyer's eye reads the movement architecture as the primary visual focus.

Movement & Specifications

Swiss-Grade RMUL2 Clone Hand-Wound Skeleton Mechanical Caliber

The Richard Mille RM 055 Super Clone runs on a Swiss-grade hand-wound mechanical movement engineered as a 1:1 clone of the genuine Richard Mille RMUL2 caliber. The movement winds by hand through the screw-down crown, drives the hours, minutes, and central seconds, and holds a power reserve of approximately 55 hours for over two days of autonomy off the wrist. The architecture mirrors the genuine RMUL2: a grade 5 titanium baseplate and bridges, a free-sprung balance, and a fully skeletonised layout that exposes the gear train and mainspring barrel through the front and the caseback. The 21,600 vibrations per hour frequency gives the central seconds hand the deliberate sweep that buyers associate with hand-wound Richard Mille sports calibers.

Accuracy, Shock Resistance and Wrist Performance

Daily deviation holds within -5 to +8 seconds per day after factory regulation, which lands close to the chronometer band that hand-wound Richard Mille buyers expect. The grade 5 titanium baseplate and bridges give the movement a strong, light, shock-resistant core, the same architectural reasoning Richard Mille applied to the genuine RMUL2 for use during golf swings, racket sport, and other high-impact wrist activity. The screw-down crown at 2 o'clock and the gasket-sealed caseback hold the 50-meter water rating through daily wear, hand washing, and light water exposure, in line with the Bubba Watson signature reference and its golf-course origin.

Spec grid:

TypeHand-wound mechanical, fully skeletonised
Caliber ReferenceSwiss-grade clone of the Richard Mille RMUL2
Frequency21,600 vph (3 Hz)
Power ReserveApproximately 55 hours
BaseplateGrade 5 titanium
BridgesGrade 5 titanium, satin finished
FunctionsHours, minutes, central seconds
Strap & Clasp

White Rubber Strap and Titanium Deployant Buckle

The standard Bubba Watson Super Clone ships on the canonical white rubber strap, the strap configuration Richard Mille pairs with the white ceramic production at launch. The strap uses a soft, flexible high-grade rubber compound that holds its shape across long-term wear, resists yellowing, and integrates cleanly into the tonneau case lugs for the continuous Richard Mille silhouette from 12 o'clock through 6 o'clock. A titanium deployant buckle closes flat against the wrist for a secure hold, lets the buyer put the watch on and take it off without flexing the rubber repeatedly, and adds a clean structural finish on the underside of the wrist.

Wrist Feel, Sizing and Daily Comfort

Total weight on the wrist lands at approximately 95 grams with the strap fitted, light for a watch of this case size and a direct result of the ceramic-and-titanium construction. The 49.94mm by 42.70mm tonneau case wears closer to a 44mm round watch on the wrist because the curved geometry follows the wrist line and the 13.05mm height clears most shirt cuffs without binding. The RM 055 Super Clone fits wrists from 6.5 inches through 8.25 inches through the deployant adjustment range, and the rubber strap softens to body temperature within a few minutes of putting the watch on.

Heritage, Comparison and Ownership Details

This section covers the lineage, cross-reference decisions, QC process, and post-purchase logistics for the Richard Mille RM 055 Super Clone Bubba Watson: Standard White ATZ Ceramic.
Canonical White Ceramic vs Black Ceramic vs White Sapphire Choosing the Right RM 055 Bubba Watson

The Bubba Watson configuration matrix in the RM 055 family carries three primary buyer choices on the Super Clone Watches catalogue, and the canonical white ceramic standard sits at the head of the lineup. The comparison of three RM 055 Bubba Watson configurations is listed below.

Configuration Case Material Visual Identity Buyer Profile Super Clone Price
RM 055 Standard White Ceramic (this listing) White ATZ ceramic + grade 5 Ti caseband Canonical bright matte white, signature Bubba Watson identity Buyer wanting the headline RM 055 reference at launch specification $1,799
RM 055 Black Ceramic Black ATZ ceramic + grade 5 Ti caseband Stealth low-contrast tonneau Buyer wanting a darker, more discreet Bubba Watson profile $1,799
RM 055 White Sapphire Sapphire crystal case + Ti caseband Fully transparent crystal case revealing the full movement architecture Buyer wanting the maximum visual statement variant $1,899

The standard white ceramic reference is the right call for the buyer who wants the canonical Bubba Watson identity, the original launch configuration, and the cleanest match to the press-launch images that defined the RM 055 at debut. The black ceramic variant suits the buyer chasing a quieter wrist presence in the same tonneau geometry. The sapphire crystal variant suits the buyer prioritising a full transparent case over the matte ceramic finish.

Heritage Richard Mille, the RM 055 and the Bubba Watson Collaboration

Richard Mille founded his eponymous watch brand in 2001 with the RM 001, a tonneau-shaped sports reference that introduced a fully visible movement, a grade 5 titanium baseplate, and a price tag positioned at the top of the contemporary watch market. The brand built its commercial identity on athlete signature partnerships, releasing tonneau references tied to Formula 1, tennis, polo, sailing, and golf. Richard Mille released the RM 055 in 2010 as the signature reference of Bubba Watson, the American left-handed golfer who went on to win the Masters Tournament in 2012 and 2014. Bubba Watson wore the white ceramic RM 055 on his wrist during competitive play, a public test of the reference's shock resistance against the impact loading of a professional golf swing. The white ATZ ceramic configuration became the headline production model of the collection and defined the visual identity of the RM 055 in print, retail, and collector circles. The RMUL2 hand-wound skeleton caliber inside the case carried Richard Mille's grade 5 titanium baseplate construction, with the bridges and the mainspring barrel laid out for full visibility from both sides of the watch. This RM 055 Super Clone carries that Bubba Watson collaboration heritage onto the wrist at a fraction of the original-market price.

4-Stage QC and What Ships in the Box

Every standard Bubba Watson Super Clone passes a four-stage quality control sequence before leaving the specialist factory. The 4 QC stages are listed below.

  • Alignment check: Bridge geometry, applied marker placement, upper-bridge "Richard Mille" wordmark position, and spline screw orientation verified against canonical Bubba Watson reference imagery.
  • Movement testing: Hand-winding action, hand-setting feel, 21,600-vph frequency, and 55-hour power reserve confirmed on a calibrated timegrapher.
  • Finishing inspection: White ATZ ceramic surface uniformity, grade 5 titanium caseband edge geometry, sapphire crystal clarity, and rubber strap integration reviewed under magnification.
  • Performance validation: Crown screw-down seal, caseback gasket integrity, and 50-meter water resistance pressure tested before final packaging.

The Bubba Watson Super Clone ships in secure, discreet packaging to protect your privacy. The full package contents are listed below.

  1. Watch: Richard Mille RM 055 Super Clone in standard white ceramic
  2. Presentation box: Richard Mille-style box set
  3. Travel pouch: outer protective pouch
  4. Booklet: owner's manual
  5. Warranty card: warranty card
  6. Extras: polishing cloth and 1 spare strap tool
Shipping, Warranty and Long-Term Aftercare

The Richard Mille RM 055 Super Clone leaves the specialist factory within 24 hours of order confirmation and travels via DHL Express or FedEx Priority with full transit insurance, tracked signature-required delivery, and discreet packaging. Worldwide delivery lands in 5 to 10 business days across the USA, UK, UAE, India, and Europe. Each watch carries a 1-year limited warranty covering movement defects and manufacturing faults, with replacement parts sourcing routed through the originating factory and servicing guidance provided over the lifetime of the watch. The 4 post-purchase support channels for this RM 055 are listed below.

  • WhatsApp: Pre-sale consultation and post-sale assistance through the on-site contact link
  • Email: Direct correspondence with a 24-hour response window through sales@superclonewatches.com
  • Live chat: Available on superclonewatches.com during business hours
  • Parts: Replacement parts sourcing through the originating specialist factory

Related Richard Mille RM 055 Super Clone Bubba Watson: Standard White ATZ Ceramic Super Clones

Richard Mille RM 055 Super Clone: Bubba Watson Black Ceramic Skeleton Dial

Richard Mille RM 055 Super Clone: Bubba Watson Black Ceramic Skeleton Dial

$2,000.00
Richard Mille RM 056-02 Super Clone : Felipe Massa Green Sapphire Tourbillon

Richard Mille RM 056-02 Super Clone : Felipe Massa Green Sapphire Tourbillon

$2,650.00
Richard Mille RM 055 Super Clone : White Ceramic Bubba Watson Skeleton Dial

Richard Mille RM 055 Super Clone : White Ceramic Bubba Watson Skeleton Dial

$1,799.00
Richard Mille Super Clone Pablo Mac Donough

Richard Mille Super Clone Pablo Mac Donough

$2,650.00

Verified Customer Reviews

Real owners of the canonical Richard Mille RM 055 Bubba Watson Super Clone share the wrist-side verdict. Ratings average 4.9 / 5 across 168 verified orders.

★★★★★

Catalogue-perfect white ceramic finish on the wrist

"This was the exact RM 055 I wanted, the original Bubba Watson white ceramic at launch spec. The case surface holds the matte white finish I have seen in every Richard Mille press shot, the titanium caseband edge geometry lines up cleanly, and the spline screw heads index correctly around the bezel. At $1,799 this gets the canonical look on the wrist."
DR David R. · Verified buyer · London
★★★★★

Tonneau silhouette wears far lighter than the case size suggests

"The case spec reads big on paper at almost 50mm long, but the curved tonneau geometry and the white rubber strap make this sit very comfortably on a 7.25-inch wrist. Total weight feels close to nothing because of the titanium core, and the deployant buckle closes flush without snagging on a shirt cuff. Hand-winding action is smooth and the power reserve runs through a long weekend."
FA Faisal A. · Verified buyer · Abu Dhabi
★★★★★

Skeleton bridge layout matches reference photos closely

"I cross-referenced this RM 055 against Richard Mille press images before unboxing and the bridge cut-out shapes, the upper-bridge wordmark placement, and the satin finish on the titanium bridges line up with the canonical production. WhatsApp support walked me through the movement spec before I committed. The watch landed in California in 6 days in secure packaging with the full box set and warranty card."
AP Andrew P. · Verified buyer · Los Angeles
FAQ

Frequently Asked Questions

Every question below is answered with direct context covering super clone basics, quality, choosing the right reference, and orders & support.

Is this the standard catalogue version of the Richard Mille RM 055 Bubba Watson?+

Yes, this listing is the canonical catalogue version of the Richard Mille RM 055 Bubba Watson in standard white ATZ ceramic, the headline reference of the RM 055 collection. The build follows the launch-spec configuration on every measurable contact point: the 49.94mm by 42.70mm tonneau case, the white ATZ ceramic bezel and caseback ring, the grade 5 titanium central caseband, the six titanium spline screws, the fully skeletonised dial with the upper-bridge "Richard Mille" branding, the RMUL2 hand-wound clone movement, and the white rubber strap with titanium deployant buckle.

What movement is inside this RM 055 Super Clone?+

A Swiss-grade hand-wound skeleton mechanical movement engineered as a 1:1 clone of the genuine Richard Mille RMUL2 caliber powers this RM 055 Super Clone. The movement runs at 21,600 vibrations per hour, holds a power reserve of approximately 55 hours, and drives the hours, minutes, and central seconds across a grade 5 titanium baseplate and bridges. The architecture matches the genuine RMUL2 on frequency, baseplate material, bridge layout, and skeleton geometry, and the central seconds hand carries the deliberate sweep buyers expect from a hand-wound Richard Mille sports caliber.

When did Richard Mille release the RM 055 and why is the white ceramic version the headline?+

Richard Mille released the RM 055 in 2010 as the signature reference of Bubba Watson, the American left-handed golfer who went on to win the Masters Tournament in 2012 and 2014. The white ATZ ceramic configuration became the headline production model of the collection because Bubba Watson wore that exact variant during competitive play, including the Masters victories, and the white-on-white visual identity defined the reference in print, retail, and collector circles. This Super Clone follows the canonical white ceramic launch specification.

How does this canonical listing differ from the other RM 055 listings on the catalogue?+

This canonical listing covers the standard white ATZ ceramic Bubba Watson reference at launch specification, the headline RM 055 configuration. The other RM 055 listings on the Super Clone Watches catalogue cover separate configurations: the black ceramic variant carries a darker, stealthier wrist presence; the white sapphire variant carries a fully transparent crystal case; the Japan Blue variant carries a tinted blue colourway; and the standalone skeleton listing covers an additional dial treatment of the same architecture. This page is the canonical headline reference, and buyers wanting the original launch specification should land here.

What is the case construction of the RM 055 in detail?+

The Richard Mille RM 055 case uses a three-component construction: a white ATZ ceramic upper bezel, a grade 5 titanium central caseband, and a matching white ATZ ceramic caseback ring, held together by six titanium spline screws under torque. ATZ ceramic, an alumina-toughened zirconia composite, sits among the hardest engineered ceramics in watchmaking and holds the bright matte white finish across long-term wear. Grade 5 titanium delivers a strong, light, thermally neutral central band. The screw-down crown at 2 o'clock and the gasket-sealed caseback hold the watch to 50 meters of water resistance.

What is the price gap versus the genuine Richard Mille RM 055 Bubba Watson?+

The authentic Richard Mille RM 055 Bubba Watson white ceramic trades around $145,000 on the secondary market, since Richard Mille produced the reference in limited annual runs across the early 2010s and demand for the canonical configuration remains high. This Super Clone sells for $1,799, which delivers 98% visual and dimensional parity at roughly 1.2% of the genuine market price. Buyers receive the full canonical Bubba Watson wrist presence, the correct material construction, and the correct movement architecture without the six-figure capital outlay.

How is the watch shipped and is the packaging discreet?+

The Richard Mille RM 055 Super Clone leaves the specialist factory within 24 hours of order confirmation and ships via DHL Express or FedEx Priority with full transit insurance and tracked signature-required delivery. The watch travels in secure, discreet packaging to protect your privacy through customs and on the doorstep. Transit times run 5 to 10 business days to the USA, UK, UAE, India, and Europe, and shipping cost is included in the listed price.

What warranty and aftercare back this RM 055 Super Clone?+

A 1-year limited warranty covers movement defects and manufacturing faults on this RM 055 Super Clone. Replacement parts sourcing routes through the originating specialist factory via Super Clone Watches support, and movement servicing guidance is provided over the lifetime of the watch through WhatsApp and email at sales@superclonewatches.com. Buyers receive pre-sale consultation, post-sale assistance, and long-term parts support as part of the ownership package.