Richard Mille RM 011 Super Clone : Standard Titanium Automatic Flyback Chronograph

Tonneau Case, Six Spline Screws and Crown Profile — 50mm Grade 5 Titanium Build

The Richard Mille RM 011 super clone carries a tonneau case measuring 50mm long by 42.70mm wide and 16.15mm thick, machined to the curved Richard Mille silhouette that the RM 011 made into the signature shape of the maison's chronograph line. The case uses grade 5 titanium across the bezel, the caseband, and the caseback, the same three-part construction used on the genuine standard reference. Six titanium spline screws ring the bezel and anchor it to the caseband through the caseback, which is the structural fingerprint of every Richard Mille tonneau. A polished and satin contrast across the case surfaces gives the RM 011 its layered finish, and the screw-down crown at 2 o'clock seals the case for water resistance to 50 meters.

Grade 5 Titanium Construction and Weight

Grade 5 titanium delivers a strong, light, corrosion-resistant case that keeps the RM 011 super clone under 90 grams on the rubber strap, the same architectural choice the genuine RM 011 uses for sport wearability. The titanium alloy carries hypoallergenic properties on the wrist and holds its finish across long-term contact with skin and sweat, which is why Richard Mille chose the material as the standard build for the RM 011 line. The polished bezel surfaces and the satin caseband edges follow the genuine finishing pattern, and the spline-screw heads sit flush with the bezel surface for the clean, engineered look that defines the reference.

Sapphire Crystal, Sapphire Caseback and Function Selector

Scratch-resistant sapphire crystal with anti-reflective coating covers the skeletonised dial and lets the chronograph registers and the oversized date read clearly under direct light. The curved sapphire follows the tonneau profile of the case and stays optically clean across viewing angles. The sapphire caseback exposes the automatic flyback chronograph clone movement, including the variable geometry rotor and the column-wheel architecture, and the screw-down crown supports the 50-meter water resistance. A function selector pusher sits on the case side at the 4-5 o'clock position and cycles the crown through four positions reading NEUTRAL, WIND, DATE, and TIME, a Richard Mille signature that prevents accidental crown engagement.

Skeletonised Dial with Open Bridges and White Markers

The skeletonised dial of this RM 011 super clone shows the chronograph bridges, the column wheel, the date wheel, and the gear train from the front, with no traditional dial plate covering the architecture. Applied white hour markers sit around the chapter ring with white printed minute graduations along the outer edge, and the applied "Richard Mille" wordmark sits at the top of the dial in white print. The skeleton hour and minute hands run in baton form filled with white luminous material for low-light reading against the open bridges. This super clone matches the bridge cut-out shape, the marker placement, and the typography of the genuine standard titanium RM 011.

Oversized Date at 12, Small Seconds at 9 and 30-Minute Counter at 4-5

The dial of the RM 011 carries an oversized date aperture at 12 o'clock that displays the date in a large, two-digit format easy to read at a glance, the most prominent date treatment in the RM 011 catalogue. A small seconds register sits at 9 o'clock and runs continuously from the going train, which lets the wearer confirm the watch is alive without engaging the chronograph. A 30-minute chronograph counter sits at the 4-5 o'clock position and records elapsed chronograph minutes after the user pushes the start button at 2 o'clock. The chronograph reset push at 4 o'clock supports the flyback function so the user resets and restarts the chronograph in one push.

Function Selector Reading NEUTRAL, WIND, DATE, TIME

The function selector on the case side at 4-5 o'clock displays through a small window on the dial and cycles the crown through 4 positions. The 4 crown positions are listed below.

• NEUTRAL: The crown sits inactive to prevent accidental adjustment of the time or the date.
• WIND: The crown manually winds the mainspring through the going train.
• DATE: The crown advances the oversized date wheel at 12 o'clock.
• TIME: The crown sets the hour and minute hands across the dial.

The selector pusher reduces stem load on the movement and prevents the user from over-adjusting the date during the hour change window, a Richard Mille design originally proven on the RM 011 line.

Swiss-Grade RMAC1 Clone Automatic Flyback Chronograph Movement

The Richard Mille RM 011 super clone runs on a Swiss-grade automatic flyback chronograph movement engineered to match the genuine Richard Mille RMAC1 caliber in feel, frequency, and architecture. The movement operates at 28,800 vibrations per hour, winds automatically through a variable geometry rotor, and holds a power reserve of approximately 55 hours. The caliber drives the central hours and minutes, the small seconds at 9, the 30-minute chronograph counter at 4-5, the central chronograph seconds, and the oversized date at 12 across a grade 5 titanium baseplate and bridges, the same architectural choice the genuine RMAC1 uses for shock resistance and weight reduction. The flyback chronograph function resets and restarts the chronograph counters in a single push of the reset pusher at 4 o'clock.

Variable Geometry Rotor and Daily Performance

The variable geometry rotor adjusts the winding efficiency to the wearer's activity level through 6 adjustable rib positions on the rotor arms, the same mechanism the genuine RMAC1 uses to balance the winding action for active versus desk-bound wear. The system reduces overwinding stress on the mainspring during sport use and lifts the winding contribution for slower wrists. Daily accuracy holds within -5 to +8 seconds per day after factory regulation, close to the chronometer band that buyers expect from a Swiss-grade 4 Hz automatic build.

Flyback Chronograph Operation and Shock Resistance

The flyback chronograph function lets the user reset the running chronograph and start a new timing run in one push of the reset pusher at 4 o'clock, without stopping the chronograph first. The grade 5 titanium baseplate and bridges give the movement a strong, light core that handles shock during sport and motorsport use, in line with the racing positioning of the RM 011 line. The 50-meter water resistance and the screw-down crown let the RM 011 super clone hold its seal through daily wear, hand washing, and light water contact.

Spec grid:

Black Rubber Strap and Titanium Folding Buckle

The RM 011 super clone carries a black rubber strap, the strap style Richard Mille pairs with the standard titanium production of the reference. The strap uses a soft, flexible rubber compound that holds its shape across long-term wear, with integrated lugs that flow into the tonneau case for the continuous Richard Mille silhouette. A grade 5 titanium folding buckle closes flush against the wrist for a secure hold and lets the buyer remove the watch without flexing the strap through repeated bending. The black rubber finish gives the RM 011 a versatile look that pairs with sportswear, casual wear, and tailored wear, which is the wear range the RM 011 was designed for.

Wrist Feel, Sizing and Comfort

The watch weighs approximately 90 grams on the full black rubber strap, which gives the RM 011 the light wrist presence buyers expect from a grade 5 titanium Richard Mille. The 50mm by 42.70mm tonneau case wears closer to a 44mm round watch on the wrist due to the curved geometry, and the 16.15mm case height clears most shirt cuffs with the strap centred. The RM 011 super clone sits comfortably on wrists from 6.5 to 8.25 inches with the folding buckle adjusted across the strap holes.