| Reference | 116400GV-0002 |
|---|---|
| Case | 40mm × 13.0mm, Oystersteel |
| Dial | Electric Z-blue with luminous markers |
The Milgauss 116400GV-0002 is the green-crystal version of the Rolex anti-magnetic watch, paired here with the electric Z-blue dial exclusive to the GV models. This super clone follows the 116400GV reference with a smooth polished bezel, the orange lightning-bolt seconds hand, a green-tinted sapphire crystal, and the three-link Oyster bracelet for $1,399. Every proportion, dial tone, and bracelet link follows the genuine reference within tight production tolerance.
The Rolex Milgauss 116400GV-0002 super clone carries a 40mm Oyster case measuring 13.0mm thick, built on a 904L stainless steel core for accurate weight and corrosion resistance. The case alternates mirror-polished and satin-brushed surfaces along the lugs and flanks, matching the finishing pattern of the genuine steel Milgauss. The screw-down Twinlock crown at 3 o'clock seals the case for water resistance to 100 meters.
The smooth polished bezel of this Milgauss super clone sits fixed around the green crystal and gives the watch a clean, understated front profile. The bezel carries no engraving or scale, which keeps visual attention on the electric Z-blue dial and the orange seconds hand. The polished finish matches the case lugs and frames the dial with a bright steel ring.
The green-tinted sapphire crystal is the defining feature of the 116400GV reference, and this super clone reproduces the slightly domed green glass that Rolex makes scratch and fade resistant. The green tint shows under direct light and around the dial edge, while the dial reads clean and undistorted through the center. The solid screw-down caseback seals the Caliber 3131 clone movement and supports water resistance to 100 meters, backed by the Twinlock crown system.
The electric Z-blue dial of this Milgauss 116400GV-0002 super clone carries a vivid metallic blue surface that shifts tone with the light, the color exclusive to the GV models. The dial holds applied baton hour markers coated with luminous material and an applied orange triangle at the 12 o'clock position. The Z-blue surface reads bright against the green crystal and the polished steel bezel.
The Milgauss 116400GV-0002 carries the orange lightning-bolt seconds hand, the signature element of the model first introduced in 1956. The lightning-bolt hand sweeps the dial in bright orange and points to the model's anti-magnetic heritage. The polished baton hour and minute hands carry luminous fill that matches the markers, which keeps the time legible in low light.
The applied Rolex coronet sits at 12 o'clock above the orange triangle marker, with "Rolex Oyster Perpetual Milgauss" printed in fine text across the Z-blue dial. The minute track frames the dial edge with even spacing. The Z-blue surface, the orange lightning-bolt hand, and the green crystal give the 116400GV a distinctive, high-contrast face against the steel case.
The Rolex Milgauss 116400GV-0002 super clone runs on a Swiss-grade automatic movement engineered to reproduce the genuine Rolex Caliber 3131 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 48-hour power reserve. The Caliber 3131 sits inside a soft-iron Faraday shield that protects the timekeeping against magnetic fields.
The Caliber 3131 clone holds daily deviation within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine movement. The soft-iron Faraday shield protects the movement against magnetic fields up to 1,000 gauss, which keeps the Milgauss accurate near generators, MRI rooms, and laboratory equipment. The smooth sweeping seconds hand and the quiet rotor confirm the Swiss-grade build of the 116400GV super clone.
Spec grid:
The Milgauss 116400GV-0002 super clone carries the Oyster bracelet, the three-piece-link design Rolex pairs with every modern Milgauss. The bracelet uses an Oystersteel finish with brushed outer links and a polished center profile, tapering smoothly from the lugs toward the wrist. A folding Oysterclasp closes flush against the wrist and holds the bracelet secure.
The watch weighs approximately 155 grams on the full Oyster bracelet, giving the substantial wrist presence buyers expect from a steel Milgauss. The Easylink comfort extension adds roughly 5mm of length for quick adjustment as wrist size changes through the day. The 40mm case and solid three-link bracelet sit comfortably on wrists from 6.5 to 8 inches.
The Rolex Milgauss 116400GV-0002 super clone carries a 40mm Oyster case measuring 13.0mm thick, built on a 904L stainless steel core for accurate weight and corrosion resistance. The case alternates mirror-polished and satin-brushed surfaces along the lugs and flanks, matching the finishing pattern of the genuine steel Milgauss. The screw-down Twinlock crown at 3 o'clock seals the case for water resistance to 100 meters.
The smooth polished bezel of this Milgauss super clone sits fixed around the green crystal and gives the watch a clean, understated front profile. The bezel carries no engraving or scale, which keeps visual attention on the electric Z-blue dial and the orange seconds hand. The polished finish matches the case lugs and frames the dial with a bright steel ring.
The green-tinted sapphire crystal is the defining feature of the 116400GV reference, and this super clone reproduces the slightly domed green glass that Rolex makes scratch and fade resistant. The green tint shows under direct light and around the dial edge, while the dial reads clean and undistorted through the center. The solid screw-down caseback seals the Caliber 3131 clone movement and supports water resistance to 100 meters, backed by the Twinlock crown system.
The electric Z-blue dial of this Milgauss 116400GV-0002 super clone carries a vivid metallic blue surface that shifts tone with the light, the color exclusive to the GV models. The dial holds applied baton hour markers coated with luminous material and an applied orange triangle at the 12 o'clock position. The Z-blue surface reads bright against the green crystal and the polished steel bezel.
The Milgauss 116400GV-0002 carries the orange lightning-bolt seconds hand, the signature element of the model first introduced in 1956. The lightning-bolt hand sweeps the dial in bright orange and points to the model's anti-magnetic heritage. The polished baton hour and minute hands carry luminous fill that matches the markers, which keeps the time legible in low light.
The applied Rolex coronet sits at 12 o'clock above the orange triangle marker, with "Rolex Oyster Perpetual Milgauss" printed in fine text across the Z-blue dial. The minute track frames the dial edge with even spacing. The Z-blue surface, the orange lightning-bolt hand, and the green crystal give the 116400GV a distinctive, high-contrast face against the steel case.
The Rolex Milgauss 116400GV-0002 super clone runs on a Swiss-grade automatic movement engineered to reproduce the genuine Rolex Caliber 3131 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 48-hour power reserve. The Caliber 3131 sits inside a soft-iron Faraday shield that protects the timekeeping against magnetic fields.
The Caliber 3131 clone holds daily deviation within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine movement. The soft-iron Faraday shield protects the movement against magnetic fields up to 1,000 gauss, which keeps the Milgauss accurate near generators, MRI rooms, and laboratory equipment. The smooth sweeping seconds hand and the quiet rotor confirm the Swiss-grade build of the 116400GV super clone.
Spec grid:
The Milgauss 116400GV-0002 super clone carries the Oyster bracelet, the three-piece-link design Rolex pairs with every modern Milgauss. The bracelet uses an Oystersteel finish with brushed outer links and a polished center profile, tapering smoothly from the lugs toward the wrist. A folding Oysterclasp closes flush against the wrist and holds the bracelet secure.
The watch weighs approximately 155 grams on the full Oyster bracelet, giving the substantial wrist presence buyers expect from a steel Milgauss. The Easylink comfort extension adds roughly 5mm of length for quick adjustment as wrist size changes through the day. The 40mm case and solid three-link bracelet sit comfortably on wrists from 6.5 to 8 inches.
The modern Milgauss offers three headline configurations across the green-crystal and clear-crystal lines, and the 116400GV-0002 holds the electric Z-blue dial under the green sapphire crystal. The comparison of the three variants is listed below.
| Variant | Dial | Crystal | Super Clone Price |
|---|---|---|---|
| 116400GV-0002 Z-Blue (this reference) | Electric Z-blue | Green-tinted sapphire | $1,399 |
| 116400GV White | White | Green-tinted sapphire | $1,399 |
| 116400 Black | Black | Clear sapphire | $1,349 |
Buyers select the 116400GV-0002 Z-blue for the vivid metallic blue dial that pairs with the green crystal for the most distinctive Milgauss look. White-dial buyers prefer the cleaner contrast against the orange lightning-bolt hand. The black-dial 116400 buyer chooses the clear-crystal version for a more conventional steel-sport profile. The 116400GV-0002 Super Clone gives the boldest dial and crystal combination of the three.
The Rolex Milgauss launched in 1956 as an anti-magnetic watch built for scientists and engineers who worked near strong magnetic fields. Rolex designed the model to resist magnetic interference up to 1,000 gauss, and the name combines "mille," the French word for one thousand, with the gauss unit of magnetic measurement. The first reference 6541 carried a rotating bezel and the orange lightning-bolt seconds hand that became the model signature. Rolex discontinued the Milgauss in the late 1980s and relaunched the model in 2007 with the modern reference 116400. The brand added the green-tinted sapphire crystal on the 116400GV, a feature no other Rolex carries, and paired it with the exclusive electric Z-blue dial. The 116400GV-0002 Super Clone carries that combined heritage of the anti-magnetic Milgauss and the green-crystal GV line onto the wrist.
Every Rolex Milgauss 116400GV-0002 super clone passes a four-stage quality control sequence before shipping. The QC steps are listed below.
The 116400GV-0002 Super Clone ships in secure, discreet packaging to protect your privacy. The full package contents are listed below.
The Rolex Milgauss 116400GV-0002 super clone ships within 24 hours of order confirmation via DHL Express or FedEx Priority with full insurance and discreet packaging. Worldwide delivery lands in 5 to 10 business days across the USA, UK, UAE, India, and Europe. Every watch carries a 1-year limited warranty covering movement defects, with replacement-parts support and servicing guidance provided after purchase. The support channels for the 116400GV-0002 Super Clone are listed below.
Real owners share the verdict.
"I wanted the electric blue Milgauss, and the Z-blue dial shifts tone in the light exactly like the genuine one. The green crystal tint shows around the edge and looks correct. The orange lightning-bolt hand is the right shade of orange. At $1,399 it reads like the real piece."
"Shipped DHL and arrived in London in 6 days. The packaging was discreet exactly as described. I work near lab equipment and the watch has held time without drifting. The smooth bezel and Oyster bracelet feel solid on the wrist."
"I was nervous spending this much on my first clone. WhatsApp support answered every question before I ordered. The watch arrived in a full box set with papers. The green crystal and the Z-blue dial closed the deal for me."
Yes, the Rolex Milgauss 116400GV-0002 sold on Super Clone Watches is a 1:1 super clone that reproduces the genuine Rolex reference at 98% visual and dimensional accuracy. The build matches the electric Z-blue dial, the green-tinted sapphire crystal, the orange lightning-bolt seconds hand, and the Oyster bracelet geometry within tight tolerance. The price of $1,399 compares to a genuine retail near $9,150 at authorized Rolex dealers.
A Swiss-grade automatic clone of Rolex Caliber 3131 powers this Milgauss 116400GV-0002 super clone. The movement runs at 28,800 vibrations per hour, holds a 48-hour power reserve, and sits inside a soft-iron Faraday shield for magnetic protection. Performance matches the genuine caliber on frequency and autonomy, with a smooth sweeping seconds hand and a quiet winding rotor.
The Milgauss 116400GV has a green crystal because Rolex designed the green-tinted sapphire as the signature feature of the GV reference. The "GV" stands for "glace verte," French for green glass, and Rolex makes the green crystal scratch and fade resistant. This super clone reproduces the slightly domed green sapphire so the watch shows the same distinctive green tint as the genuine 116400GV.
The anti-magnetic protection on this Milgauss works through a soft-iron Faraday shield that surrounds the movement. The shield absorbs magnetic energy and keeps it away from the timekeeping components, which lets the watch resist magnetic fields up to 1,000 gauss. This protection keeps the 116400GV-0002 super clone accurate near generators, MRI equipment, and laboratory machinery.
The case uses solid 904L stainless steel rather than a plating over a base metal. This construction gives the exact wrist weight, corrosion resistance, and brushed-and-polished finishing of the genuine steel Milgauss. The 904L alloy on the 116400GV-0002 super clone takes a high polish and resists daily scratches for long-term wear.
The authentic Rolex Milgauss 116400GV retails near $9,150 at authorized dealers and trades above that on the secondary market. This super clone sells for $1,399, which delivers 98% visual and functional parity at roughly 15% of the genuine retail price. Buyers receive the full steel Milgauss wrist presence without the capital commitment or the dealer waitlist.
The Rolex Milgauss 116400GV-0002 super clone ships via DHL Express or FedEx Priority with full insurance and tracked, signature-required delivery. The watch travels in secure, discreet packaging to protect your privacy. Transit time runs 5 to 10 business days to the USA, UK, UAE, India, and Europe, and the shipping cost is included in the price.
A 1-year limited warranty covers movement defects and manufacturing faults on this Milgauss 116400GV-0002 super clone. Replacement parts sourcing runs through the originating factory via Super Clone Watches support. Movement servicing guidance is provided through WhatsApp and email for the lifetime of the watch.
