| Reference | 218239 |
|---|---|
| Case | 41mm × 13mm, 18k white gold-tone |
| Dial | Diamond hour markers, simulated stones |
The Day-Date II 218239 is the 41mm white gold version of the Rolex Day-Date with a diamond-set bezel and diamond hour markers. This super clone reproduces the 218239 reference with high-grade simulated diamonds, a President bracelet, and the spelled-out day window for $1,699. Every proportion, marker, and bracelet link follows the genuine reference within tight production tolerance.
The Rolex Day-Date II 218239 super clone carries a 41mm Oyster case measuring 13mm thick, built on a 904L stainless steel core with a high-grade white gold-tone finish for accurate color and long-term wear. The 41mm diameter is the larger Day-Date II proportion that Rolex introduced in 2008 for this generation, sitting between the 36mm classic Day-Date and the later 40mm Day-Date 40.
The bezel holds a ring of high-grade simulated diamonds set in even rows around the dial, and this super clone aligns each stone at a consistent height so light reflects cleanly across the rim. The simulated stones carry a faceted cut that returns bright sparkle similar to mined diamonds without the cost. Mirror-polished surfaces wrap the case and the bezel collar for the bright look white gold is known for. The Twinlock screw-down crown sits at 3 o'clock, protected by a polished crown guard and engraved with the Rolex coronet.
Scratch-resistant sapphire crystal covers the dial and resists daily knocks for years of clear reading. A Cyclops lens sits above the date at 3 o'clock and magnifies the date 2.5 times for fast legibility. The solid screw-down caseback seals the movement and holds water resistance to 100 meters, supported by the Twinlock crown system.
The dial of this Day-Date II 218239 super clone carries simulated diamond hour markers at every position, set in white gold-tone surrounds that match the case and the diamond bezel for an even, formal look. Each marker uses a high-grade simulated stone, faceted to catch light against the dial surface.
The spelled-out day display sits in an arched window at 12 o'clock and changes instantaneously at midnight. The date appears at 3 o'clock under the Cyclops lens. White gold-tone baton hands sweep across the dial, with the seconds hand running smoothly at 28,800 vibrations per hour for the genuine Day-Date motion.
The applied Rolex coronet sits at 12 o'clock above the day window, with "Rolex Oyster Perpetual Day-Date" printed in crisp, fine text. The minute track frames the dial edge with even spacing. The diamond markers, white gold case, and diamond bezel give the 218239 a fully matched, formal dress identity.
The Rolex Day-Date II 218239 super clone runs on a Swiss-grade automatic movement engineered to reproduce the genuine Rolex Caliber 3156 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 48-hour power reserve for a full day off the wrist. Caliber 3156 is the movement Rolex built specifically for the Day-Date II generation.
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 3156. The smooth sweeping seconds hand and the quiet rotor confirm the Swiss-grade build. The instantaneous day and date both jump cleanly at midnight rather than crawling across the change.
Spec grid:
The Day-Date II 218239 super clone carries the President bracelet, the three-piece semi-circular link design Rolex created for the Day-Date in 1956. The bracelet uses a white gold-tone finish to match the case and the diamond bezel, with polished links that taper smoothly from the lugs toward the wrist.
The watch weighs approximately 155 grams on the full bracelet, giving the substantial wrist presence buyers expect from a gold President. The concealed Crownclasp closes flush and hides inside the bracelet, leaving an unbroken band of links around the wrist. The 41mm case and tapered bracelet sit comfortably on wrists from 6.75 to 8.25 inches.
The Rolex Day-Date II 218239 super clone carries a 41mm Oyster case measuring 13mm thick, built on a 904L stainless steel core with a high-grade white gold-tone finish for accurate color and long-term wear. The 41mm diameter is the larger Day-Date II proportion that Rolex introduced in 2008 for this generation, sitting between the 36mm classic Day-Date and the later 40mm Day-Date 40.
The bezel holds a ring of high-grade simulated diamonds set in even rows around the dial, and this super clone aligns each stone at a consistent height so light reflects cleanly across the rim. The simulated stones carry a faceted cut that returns bright sparkle similar to mined diamonds without the cost. Mirror-polished surfaces wrap the case and the bezel collar for the bright look white gold is known for. The Twinlock screw-down crown sits at 3 o'clock, protected by a polished crown guard and engraved with the Rolex coronet.
Scratch-resistant sapphire crystal covers the dial and resists daily knocks for years of clear reading. A Cyclops lens sits above the date at 3 o'clock and magnifies the date 2.5 times for fast legibility. The solid screw-down caseback seals the movement and holds water resistance to 100 meters, supported by the Twinlock crown system.
The dial of this Day-Date II 218239 super clone carries simulated diamond hour markers at every position, set in white gold-tone surrounds that match the case and the diamond bezel for an even, formal look. Each marker uses a high-grade simulated stone, faceted to catch light against the dial surface.
The spelled-out day display sits in an arched window at 12 o'clock and changes instantaneously at midnight. The date appears at 3 o'clock under the Cyclops lens. White gold-tone baton hands sweep across the dial, with the seconds hand running smoothly at 28,800 vibrations per hour for the genuine Day-Date motion.
The applied Rolex coronet sits at 12 o'clock above the day window, with "Rolex Oyster Perpetual Day-Date" printed in crisp, fine text. The minute track frames the dial edge with even spacing. The diamond markers, white gold case, and diamond bezel give the 218239 a fully matched, formal dress identity.
The Rolex Day-Date II 218239 super clone runs on a Swiss-grade automatic movement engineered to reproduce the genuine Rolex Caliber 3156 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 48-hour power reserve for a full day off the wrist. Caliber 3156 is the movement Rolex built specifically for the Day-Date II generation.
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 3156. The smooth sweeping seconds hand and the quiet rotor confirm the Swiss-grade build. The instantaneous day and date both jump cleanly at midnight rather than crawling across the change.
Spec grid:
The Day-Date II 218239 super clone carries the President bracelet, the three-piece semi-circular link design Rolex created for the Day-Date in 1956. The bracelet uses a white gold-tone finish to match the case and the diamond bezel, with polished links that taper smoothly from the lugs toward the wrist.
The watch weighs approximately 155 grams on the full bracelet, giving the substantial wrist presence buyers expect from a gold President. The concealed Crownclasp closes flush and hides inside the bracelet, leaving an unbroken band of links around the wrist. The 41mm case and tapered bracelet sit comfortably on wrists from 6.75 to 8.25 inches.
The Day-Date II 218 family in white gold offers three main bezel routes, and the diamond-set bezel of the 218239 sits as the most formal of them. The comparison of the three bezel options is listed below.
| Bezel | Character | Light Behavior | Super Clone Price |
|---|---|---|---|
| Diamond-set (this bezel) | Formal, statement dress | High sparkle | $1,699 |
| Fluted | Classic Day-Date | Sharp reflections | $1,499 |
| Smooth | Restrained, modern | Soft polish | $1,499 |
Buyers select the diamond-set bezel of the 218239 for the brightest, most formal presence on the wrist. Fluted bezel buyers want the traditional Day-Date look with grooved edges. Smooth bezel buyers prefer a quieter, more discreet white gold profile. The 218239 Super Clone gives the most luxurious and eye-catching of the three, with the diamonds rendered as high-grade simulated stones.
The Rolex Day-Date launched in 1956 as the first wristwatch to display the day of the week spelled out in full in a window on the dial. Rolex paired the model only with platinum and 18k gold from the start, which earned it the "President" name after several heads of state wore it. Rolex introduced the Day-Date II generation in 2008 with a larger 41mm case and Caliber 3156, the first time the Day-Date moved beyond its long-standing 36mm format. Rolex produced the Day-Date II until 2015, when the 40mm Day-Date 40 with Caliber 3255 replaced it. The 218239 reference holds the white gold case in the Day-Date II generation, and the diamond bezel and diamond markers mark its dress configuration. The 218239 Super Clone carries that six-decade Day-Date lineage onto the wrist.
Every Rolex Day-Date II 218239 super clone passes a four-stage quality control sequence before shipping. The QC steps are listed below.
The 218239 Super Clone ships in secure, discreet packaging to protect your privacy. The full package contents are listed below.
The Rolex Day-Date II 218239 super clone ships within 24 hours of order confirmation via DHL Express or FedEx Priority with full insurance and discreet packaging. Worldwide delivery lands in 5 to 10 business days across the USA, UK, UAE, India, and Europe. Every watch carries a 1-year limited warranty covering movement defects, with replacement-parts support and servicing guidance provided after purchase. The support channels for the 218239 Super Clone are listed below.
Real owners of the Rolex Day-Date II 218239 super clone share the wrist-side verdict. Ratings average 4.9 / 5 across 142 verified orders.
"I wanted a white gold President with real presence, and the diamond bezel on this one sparkles cleanly under any light. The simulated stones are set evenly with no gaps. The President bracelet feels heavy and tight. At $1,699 it looks the part on the wrist."
"Shipped DHL and arrived in Dubai in 6 days. The packaging was discreet exactly as described. The day window snaps over at midnight cleanly, and the date jumps with it. The 41mm case wears larger than my old 36mm Day-Date and I like the extra size."
"I was nervous spending this much on my first clone. WhatsApp support answered every question about the diamond setting before I ordered. The watch arrived in a full box set with papers. The diamond markers and the concealed Crownclasp closed the deal for me."
Yes, the Rolex Day-Date II 218239 sold on Super Clone Watches is a 1:1 super clone that reproduces the genuine Rolex reference at 98% visual and dimensional accuracy. The build matches the diamond bezel layout, the diamond hour markers, and the President bracelet geometry within tight tolerance. The price of $1,699 compares to a genuine retail near $58,000 at authorized Rolex dealers.
No, the diamonds on this 218239 super clone are high-grade simulated stones, not mined diamonds. The simulated stones carry a faceted cut that returns bright sparkle similar to mined diamonds, and they sit in even rows on the bezel and as hour markers on the dial. This construction delivers the full diamond-set Day-Date II look without the cost of mined stones.
A Swiss-grade automatic clone of Rolex Caliber 3156 powers this Day-Date II 218239 super clone. The movement runs at 28,800 vibrations per hour, holds a 48-hour power reserve, and drives the instantaneous day and date functions. Caliber 3156 is the genuine caliber Rolex built for the Day-Date II generation, and this clone matches it on frequency and autonomy.
The case uses a high-grade white gold-tone finish over a 904L stainless steel core rather than solid 18k white gold. This construction delivers the exact cool white metal color, a substantial wrist weight, and durable scratch resistance for daily wear. Solid 18k white gold on the genuine Rolex 218239 adds the bulk of the $58,000 retail price without changing the wrist-side appearance.
The Day-Date II 218239 measures 41mm in case diameter and 13mm in thickness, the largest size in the Day-Date line. The 41mm case wears bigger than the 36mm classic Day-Date and slightly larger than the 40mm Day-Date 40, which suits buyers who prefer a bolder dress watch. This super clone sits comfortably on wrists from 6.75 to 8.25 inches.
The authentic Rolex Day-Date II 218239 with a diamond bezel retails near $58,000 at authorized dealers and trades higher on the secondary market. This super clone sells for $1,699, which delivers 98% visual and functional parity at roughly 2.9% of the genuine retail price. Buyers receive the full white gold diamond-set Day-Date II wrist presence without the capital commitment.
The Rolex Day-Date II 218239 super clone ships via DHL Express or FedEx Priority with full insurance and tracked, signature-required delivery. The watch travels in secure, discreet packaging to protect your privacy. Transit time runs 5 to 10 business days to the USA, UK, UAE, India, and Europe, and the shipping cost is included in the price.
A 1-year limited warranty covers movement defects and manufacturing faults on this Day-Date II 218239 super clone. Replacement parts sourcing runs through the originating factory via Super Clone Watches support. Movement servicing guidance is provided through WhatsApp and email for the lifetime of the watch.
