| Reference | 218235-0035 |
|---|---|
| Case | 41mm × 12mm, 18k Everose gold-tone |
| Dial | Wave pattern with applied gold markers |
The Day-Date II 218235-0035 is the 41mm Everose gold version of the Rolex Day-Date with the decorative wave-pattern dial configuration. This super clone reproduces the 218235-0035 reference with a flowing wave dial finish, applied gold markers, a fluted bezel, a President bracelet, and the spelled-out day window for $1,499. Every proportion, marker, and bracelet link follows the genuine 41mm reference within tight production tolerance.
The Rolex Day-Date II 218235-0035 super clone carries a 41mm Oyster case measuring 12mm thick, built on a 904L stainless steel core with a high-grade Everose gold-tone finish for accurate pink-gold color and long-term wear. The 41mm diameter is the larger Day-Date proportion that Rolex used for the Day-Date II generation between 2008 and 2015.
The fluted bezel rings the dial with evenly spaced grooves, and this super clone cuts each groove at a consistent angle so light moves cleanly around the rim. Mirror-polished surfaces wrap the case and the bezel for the warm shine Everose gold is known for. The Twinlock screw-down crown sits at 3 o'clock, protected by a polished crown guard and engraved with the Rolex coronet.
Scratch-resistant sapphire crystal covers the wave dial and resists daily knocks for years of clear reading. A Cyclops lens sits above the date at 3 o'clock and magnifies the date 2.5 times for fast legibility. The solid screw-down caseback seals the movement and holds water resistance to 100 meters, supported by the Twinlock crown system.
The wave dial of this Day-Date II 218235-0035 super clone carries a flowing, repeating wave motif across its full surface, finished so light shifts smoothly along each curve as the wrist moves. The dial holds applied Everose gold-tone baton markers at every hour, polished and faceted to stand clear against the textured wave field.
The spelled-out day display sits in an arched window at 12 o'clock and changes instantaneously at midnight. The date appears at 3 o'clock under the Cyclops lens. Everose gold-tone baton hands sweep across the wave dial, with the seconds hand running smoothly at 28,800 vibrations per hour for the genuine Day-Date motion.
The applied Rolex coronet sits at 12 o'clock above the day window, with "Rolex Oyster Perpetual Day-Date" printed in crisp, fine text. The minute track frames the dial edge with even spacing. The wave-pattern dial, Everose gold markers, and fluted bezel give the 218235-0035 a decorative yet formal dress identity.
The Rolex Day-Date II 218235-0035 super clone runs on a Swiss-grade automatic movement engineered to reproduce the genuine Rolex Caliber 3156 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 48-hour power reserve for a full day off the wrist.
Spec grid:
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 3156. The smooth sweeping seconds hand and the quiet rotor confirm the Swiss-grade build. The instantaneous day and date both jump cleanly at midnight rather than crawling across the change.
The Day-Date II 218235-0035 super clone carries the President bracelet, the three-piece semi-circular link design Rolex created for the Day-Date in 1956. The bracelet uses an Everose gold-tone finish to match the case and the fluted bezel, with polished links that taper smoothly from the lugs toward the wrist.
The watch weighs approximately 155 grams on the full bracelet, giving the substantial wrist presence buyers expect from a 41mm gold President. The concealed Crownclasp closes flush and hides inside the bracelet, leaving an unbroken band of links around the wrist. The 41mm case and tapered bracelet sit comfortably on wrists from 6.75 to 8.25 inches.
The Rolex Day-Date II 218235-0035 super clone carries a 41mm Oyster case measuring 12mm thick, built on a 904L stainless steel core with a high-grade Everose gold-tone finish for accurate pink-gold color and long-term wear. The 41mm diameter is the larger Day-Date proportion that Rolex used for the Day-Date II generation between 2008 and 2015.
The fluted bezel rings the dial with evenly spaced grooves, and this super clone cuts each groove at a consistent angle so light moves cleanly around the rim. Mirror-polished surfaces wrap the case and the bezel for the warm shine Everose gold is known for. The Twinlock screw-down crown sits at 3 o'clock, protected by a polished crown guard and engraved with the Rolex coronet.
Scratch-resistant sapphire crystal covers the wave dial and resists daily knocks for years of clear reading. A Cyclops lens sits above the date at 3 o'clock and magnifies the date 2.5 times for fast legibility. The solid screw-down caseback seals the movement and holds water resistance to 100 meters, supported by the Twinlock crown system.
The wave dial of this Day-Date II 218235-0035 super clone carries a flowing, repeating wave motif across its full surface, finished so light shifts smoothly along each curve as the wrist moves. The dial holds applied Everose gold-tone baton markers at every hour, polished and faceted to stand clear against the textured wave field.
The spelled-out day display sits in an arched window at 12 o'clock and changes instantaneously at midnight. The date appears at 3 o'clock under the Cyclops lens. Everose gold-tone baton hands sweep across the wave dial, with the seconds hand running smoothly at 28,800 vibrations per hour for the genuine Day-Date motion.
The applied Rolex coronet sits at 12 o'clock above the day window, with "Rolex Oyster Perpetual Day-Date" printed in crisp, fine text. The minute track frames the dial edge with even spacing. The wave-pattern dial, Everose gold markers, and fluted bezel give the 218235-0035 a decorative yet formal dress identity.
The Rolex Day-Date II 218235-0035 super clone runs on a Swiss-grade automatic movement engineered to reproduce the genuine Rolex Caliber 3156 in feel, frequency, and autonomy. The movement operates at 28,800 vibrations per hour, winds bidirectionally through a free-rotating rotor, and holds a 48-hour power reserve for a full day off the wrist.
Spec grid:
Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer standard of the genuine Caliber 3156. The smooth sweeping seconds hand and the quiet rotor confirm the Swiss-grade build. The instantaneous day and date both jump cleanly at midnight rather than crawling across the change.
The Day-Date II 218235-0035 super clone carries the President bracelet, the three-piece semi-circular link design Rolex created for the Day-Date in 1956. The bracelet uses an Everose gold-tone finish to match the case and the fluted bezel, with polished links that taper smoothly from the lugs toward the wrist.
The watch weighs approximately 155 grams on the full bracelet, giving the substantial wrist presence buyers expect from a 41mm gold President. The concealed Crownclasp closes flush and hides inside the bracelet, leaving an unbroken band of links around the wrist. The 41mm case and tapered bracelet sit comfortably on wrists from 6.75 to 8.25 inches.
The Day-Date II 218235 in Everose gold offers three main dial routes, and the wave-pattern dial of this configuration sits as the most decorative of them. The comparison of the three dial options is listed below.
| Dial | Character | Contrast | SUPER CLONE PRICE |
|---|---|---|---|
| Wave Pattern (This Dial) | Decorative, textured | Medium | $1,499 |
| Black | Modern, formal | High | $1,499 |
| Chocolate | Warm, fully matched gold | Low, warm | $1,499 |
Buyers select the wave dial of the 218235-0035 for the flowing decorative texture that sets it apart from the flat-finish dials. Black dial buyers want sharp contrast against the Everose case. Chocolate dial buyers prefer a fully matched warm gold tone with low contrast. The 218235-0035 Super Clone gives the most visual movement and surface interest of the three.
The Rolex Day-Date launched in 1956 as the first wristwatch to display the day of the week spelled out in full in a window on the dial. Rolex paired the model only with platinum and 18k gold from the start, which earned it the "President" name after several heads of state wore it. Rolex introduced the Day-Date II generation in 2008 with a larger 41mm case and Caliber 3156, sitting alongside the 36mm Day-Date until the Day-Date 40 replaced both formats in 2015. The 218235 reference holds the Everose gold fluted-bezel case in the Day-Date II generation, and the "-0035" suffix marks the wave-pattern dial within that reference. Everose gold is the patented rose-gold alloy Rolex introduced in 2005, blended to keep its pink hue stable against fading. The 218235-0035 Super Clone carries that six-decade Day-Date lineage onto the wrist in the larger 41mm size.
Every Rolex Day-Date II 218235-0035 super clone passes a four-stage quality control sequence before shipping. The QC steps are listed below.
The 218235-0035 Super Clone ships in secure, discreet packaging to protect your privacy. The full package contents are listed below.
Extras: 1 polishing cloth and 1 spare link set
The Rolex Day-Date II 218235-0035 super clone ships within 24 hours of order confirmation via DHL Express or FedEx Priority with full insurance and discreet packaging. Worldwide delivery lands in 5 to 10 business days across the USA, UK, UAE, India, and Europe. Every watch carries a 1-year limited warranty covering movement defects, with replacement-parts support and servicing guidance provided after purchase. The support channels for the 218235-0035 Super Clone are listed below.
Real owners share the verdict.
I wanted a Day-Date with more surface interest than a plain dial, and the wave pattern on this one shifts as the light moves. The 41mm case fills my wrist properly. The Everose gold tone looks accurate against the fluted bezel. At $1,499 it carries real presence.
Shipped DHL and arrived in Dubai in 6 days. The packaging was discreet exactly as described. The day window snaps over at midnight cleanly, and the date jumps with it. The weight feels close to a real gold piece.
I was nervous spending this much on my first clone. WhatsApp support answered every question before I ordered. The watch arrived in a full box set with papers. The wave dial and the concealed Crownclasp closed the deal for me.
Yes, the Rolex Day-Date II 218235-0035 sold on Super Clone Watches is a 1:1 super clone that reproduces the genuine Rolex reference at 98% visual and dimensional accuracy. The build matches the wave-pattern dial texture, the applied Everose gold markers, and the President bracelet geometry within tight tolerance. The price of $1,499 compares to a genuine market figure near $42,000 for this discontinued reference.
The 218235-0035 reference identifies the Day-Date II in 18k Everose gold with a fluted bezel and a 41mm case, with the "-0035" suffix marking the wave-pattern dial. The 218xxx series marks the Day-Date II generation Rolex produced from 2008 to 2015, and the 218235 portion marks the Everose gold version. This super clone reproduces that exact reference configuration with the decorative wave dial.
A Swiss-grade automatic clone of Rolex Caliber 3156 powers this Day-Date II 218235-0035 super clone. The movement runs at 28,800 vibrations per hour, holds a 48-hour power reserve, and drives the instantaneous day and date functions. Caliber 3156 is the genuine caliber Rolex used for the Day-Date II generation, and this clone matches it on frequency and autonomy.
The wave dial on the Day-Date II 218235-0035 is a decorative dial finished with a flowing, repeating wave pattern across its surface. This textured finish shifts the way light moves over the dial as the wrist turns, giving the watch more visual depth than a flat-finish dial. The super clone reproduces the wave pattern texture and the applied Everose gold markers that sit above it.
The case uses a high-grade Everose gold-tone finish over a 904L stainless steel core rather than solid 18k Everose gold. This construction delivers the exact warm pink-gold color, a substantial wrist weight, and durable scratch resistance for daily wear. Solid 18k Everose gold on the genuine Rolex 218235 adds roughly $40,000 to the market value without changing the wrist-side appearance.
The Day-Date II 218235-0035 measures 41mm in case diameter and 12mm in thickness, which is the larger Day-Date proportion. This 41mm case wears with more presence than the standard 36mm Day-Date and suits wrists from 6.75 to 8.25 inches. The tapered President bracelet balances the case weight of roughly 155 grams for comfortable all-day wear.
The Rolex Day-Date II 218235-0035 super clone ships via DHL Express or FedEx Priority with full insurance and tracked, signature-required delivery. The watch travels in secure, discreet packaging to protect your privacy. Transit time runs 5 to 10 business days to the USA, UK, UAE, India, and Europe, and the shipping cost is included in the price.
A 1-year limited warranty covers movement defects and manufacturing faults on this Day-Date II 218235-0035 super clone. Replacement parts sourcing runs through the originating factory via Super Clone Watches support. Movement servicing guidance is provided through WhatsApp and email for the lifetime of the watch.
