Rolex Cellini 50509 Super Clone 39mm White Gold Black Roman Dial Dress Watch

 39mm White Gold-Tone Case and Wearability

The Cellini 50509 Super Clone carries a 39mm round case measuring 9.7mm thick on a 904L stainless steel core finished with high-grade white gold PVD for long-term color retention. The 39mm diameter and 47mm lug-to-lug measurement give the Cellini 50509 the modern dress-watch profile that wears flat on wrist sizes from 6.5 inches to 8 inches. The slim 9.7mm height slides under a shirt cuff without catch, holding the formal silhouette the modern Cellini line was designed around.

Double-Bezel Geometry and Polished Finishing

The double-bezel is the visual signature of the 50509 reference and separates it from the smooth-bezel dress watches of competing brands. The polished domed outer bezel rises in a soft arc from the case mid-line and surrounds a narrower fluted inner edge that frames the dial. The fluted inner ring carries the heritage cue from the Rolex Datejust line while keeping the dressy register the Cellini Time was designed for.

Sapphire Crystal, Closed Caseback and Crown

A domed sapphire crystal with anti-reflective treatment sits over the dial in the slightly raised profile the genuine reference uses. The closed caseback carries the Rolex coronet etching and seals the movement chamber against 50 meters of water pressure. The Twinlock-style screw-down crown holds the 5 ATM water resistance the genuine 50509 offers, with the Rolex coronet machined into the crown face for daily winding feel.

 Black Lacquer Dial Finish

The black lacquer dial is the defining attribute of this Cellini 50509 Super Clone, finished by BT Factory with the deep glossy lacquer the genuine 50509-0007 variant carries. The black surface holds a uniform reflective depth that catches light cleanly across the room and gives the applied gold markers the contrast Rolex designed for the dressier Cellini Time configurations. The lacquer reads as authentic under 10x magnification without the flat printed look that signals lower-tier replica work.

Applied White Gold Roman Numerals

The dial carries applied 18k white-gold-tone Roman numerals at every hour position, faceted to catch light at the same angles the genuine markers hold. The numerals sit on a thin minute track printed in white that runs the dial circumference. The applied Rolex coronet sits at 12 o'clock above the printed "Rolex Cellini" wordmark, with the "Swiss Made" line at 6 o'clock. The Roman numeral layout matches the dimensions of the genuine 50509 variant within tight tolerance.

Hands and Reading Clarity

The dial uses faceted white-gold-tone alpha hands for hours and minutes and a slim sweeping seconds hand with a counterweight tail. The hands hold a polished surface without luminous fill, matching the dress-watch register Rolex set for the Cellini Time line. The no-date dial layout preserves the symmetry the Cellini 50509 was built around, giving the black lacquer surface the uninterrupted balance the contemporary Cellini line is known for.

Swiss-Grade Automatic Caliber 3132 Clone

The Cellini 50509 Super Clone runs on a Swiss-grade automatic clone movement engineered to match the autonomy and feel of the genuine Caliber 3132. The movement holds a 48-hour power reserve at full wind, beats at 28,800 vibrations per hour, and drives a smooth sweeping seconds hand without stutter. The bidirectional perpetual rotor winds quietly against the wrist, holding the quiet-rotor character that defines high-grade Rolex clone calibers.

 Accuracy and Sweep Performance

Daily deviation holds within -5 to +10 seconds per day after factory regulation, matching the chronometer-grade tolerance Rolex sets for the genuine 3132. The bidirectional perpetual rotor winds quietly against the wrist without the audible swing rattle that signals a budget clone. The 28,800 vph beat rate gives the central seconds hand a glass-smooth sweep that holds the dressy register the Cellini 50509 is built around.

Read more specifications:

 Brown Alligator Leather Strap

The Cellini 50509 Super Clone ships on a brown alligator-grain genuine leather strap, hand-cut to a 20mm lug width that tapers to 16mm at the buckle. The square-scale alligator pattern follows the saddle-stitch construction the genuine Rolex strap carries, with a soft suede lining that conforms to the wrist within the first week of wear. The strap holds a matte finish on the surface and a polished edge along the perimeter, matching the dress-strap register Rolex specifies for the Cellini line.

18k White Gold-Tone Tang Buckle and Comfort

The polished tang buckle carries an 18k white gold PVD finish over a 904L stainless steel base, engraved with the Rolex coronet on the buckle plate. The single-fold construction tucks flat against the wrist underside without the bulk of a deployant clasp, holding the slim profile the Cellini 50509 dress silhouette is designed around. The strap adjusts to wrist sizes from 6 inches to 8 inches through standard buckle holes, and the full watch weighs 70 grams on the strap.