Richard Mille RM 35-02 Super Clone: Rafael Nadal Red Quartz TPT and NTPT Carbon

Tonneau Case, Crown and Spline Screw Profile 49.94mm Red TPT and Carbon Build

The Richard Mille RM 35-02 super clone carries a tonneau case measuring 49.94mm long by 44.50mm wide and 13.55mm thick, machined to the curved Richard Mille silhouette that defines every Rafael Nadal reference. Six grade 5 titanium spline screws ring the bezel and lock the case sandwich together, a structural detail that gives the RM 35-02 its engineered architectural look. The screw-down crown on the right flank seals the case for water resistance to 50 meters and carries the geometric grip pattern the brand uses across the sports line. The case sandwich brief stays true to the genuine reference, with the bezel, caseband, and caseback machined to the same tolerances buyers know from boutique handling.

Red Quartz TPT Bezel and NTPT Carbon Caseband Construction

The red Quartz TPT bezel of this RM 35-02 super clone uses the layered silica-fibre composite that Richard Mille developed with North Thin Ply Technology, with the red pigment running through the layers rather than sitting on the surface. Quartz TPT shows the distinctive marbled grain pattern that buyers identify as the visual signature of the modern Richard Mille sports range, and the colour reads as a deep, saturated red under daylight. The NTPT carbon caseband pairs with the bezel through six titanium spline screws and delivers a dark, layered carbon grain that contrasts cleanly against the red. NTPT carbon, a thin-ply carbon composite, sits among the lightest engineered case materials in modern watchmaking and helps the RM 35-02 sit close to a tennis-grade weight on the wrist. This super clone follows the genuine TPT-and-carbon pairing so the watch reads correctly under close inspection on grain pattern, colour saturation, and weight.

Sapphire Crystal and Sapphire Caseback

Scratch-resistant sapphire crystal with anti-reflective coating covers the skeletonised dial and lets full light through to the open bridges underneath. The crystal follows the curved tonneau profile and stays clear under angled light, which keeps the open dial readable across the day. The sapphire caseback shows the automatic clone movement from below, including the variable geometry rotor sweep, the visible mainspring barrel, and the gear train. The screw-down crown supports the 50-meter water resistance of the reference and keeps the case sealed against everyday water contact.

Skeletonised Dial with Open Bridges and Red Accents

The skeletonised dial of this RM 35-02 super clone shows the movement bridges, the mainspring barrel, and the gear train from the front, with no traditional dial plate covering the architecture. Red accents pick out key elements across the chapter ring and the upper bridge to match the red Quartz TPT bezel, while the darker carbon-toned bridge surfaces echo the NTPT caseband. The open design lets the buyer read both the time and the inner mechanics through the sapphire, the signature visual identity of every Richard Mille sports reference. This super clone matches the bridge cut-out geometry, the satin finishing on the bridges, the red accent placement, and the open architecture of the genuine red Quartz TPT and NTPT carbon RM 35-02.

Hour Markers, Skeleton Hands and Small Seconds at 6 O'Clock

The RM 35-02 carries applied baton hour markers placed around the chapter ring, with the applied "Richard Mille" branding on the upper bridge in the same red and carbon palette. The skeleton hour and minute hands run in skeletonised baton form and match the open dial language, giving a clear time reading against the open bridges. A small seconds register sits at 6 o'clock with a sub-dial chapter ring and a dedicated skeleton seconds hand, which is the dial layout that distinguishes the RM 35-02 from the time-only RM 35-01 reference. The marker placement, the print, the upper-bridge logo, and the 6 o'clock sub-dial follow the red Quartz TPT and NTPT carbon reference layout.

Tonneau Layout and Legibility

The tonneau case shape extends the dial vertically, which gives the skeletonised display extra real estate for the visible movement architecture and the 6 o'clock sub-dial. The skeleton hour and minute hands stay legible against the open bridges through the red accent contrast, and the chapter ring carries the minute track around the outer edge for precise reading. The red Quartz TPT bezel frames the dial with a tight colour echo to the dial accents, which keeps the visual identity of the reference tightly coherent across bezel, dial, and strap.

Swiss-Grade RMAL2 Clone Automatic Skeleton Movement

The Richard Mille RM 35-02 super clone runs on a Swiss-grade automatic mechanical movement engineered to match the genuine Richard Mille RMAL2 caliber in feel, frequency, and architecture. The movement operates at 28,800 vibrations per hour, winds automatically through a variable geometry rotor, and holds a power reserve close to 55 hours for over two days off the wrist. The variable geometry rotor adjusts its winding mass to the wearer's activity level, the same engineering brief Richard Mille uses on the genuine RMAL2 to keep the mainspring tension efficient through sport use. The caliber drives the central hours, the central minutes, and the small seconds at 6 o'clock across a grade 5 titanium baseplate and bridges, the same architectural choice the genuine RMAL2 uses for shock resistance and weight reduction.

Accuracy, Shock Resistance and Daily Performance

Daily deviation holds within -4 to +6 seconds per day after factory regulation, close to the chronometer band that buyers expect from a Swiss-grade automatic build at this tier. The grade 5 titanium baseplate and bridges give the movement a strong, light core that handles shock during sport use, which is the architectural reasoning behind the genuine RMAL2 and the wider Rafael Nadal collaboration. The 50-meter water resistance and the screw-down crown let the RM 35-02 super clone hold its seal through daily wear, hand washing, and light water contact, in line with the on-court positioning of the Rafael Nadal sports reference. The 4 Hz beat rate delivers a smooth seconds sweep on the 6 o'clock sub-dial, which is the visible cue most buyers check first on a Richard Mille automatic.

Spec grid:

Red and Black Duotone Rubber Strap and Titanium Folding Buckle

The RM 35-02 super clone carries a red and black duotone rubber strap, the strap style Richard Mille pairs with the red Quartz TPT and NTPT carbon reference. The red outer surface picks up the bezel colour while the black inner side sits against the skin, giving the strap a two-tone identity that matches the wider colour brief of the watch. The strap uses a soft, flexible rubber compound that holds its shape across long-term wear, with integrated lugs that flow into the tonneau case for the continuous Richard Mille silhouette. A grade 5 titanium folding buckle closes flush against the wrist for a secure hold and lets the buyer remove the watch without flexing the strap repeatedly. The RM 35-02 uses the duotone rubber strap on this Quartz TPT and NTPT carbon variant and not a metal bracelet.

Wrist Feel, Sizing and Comfort

The watch weighs approximately 75 grams on the full rubber strap, which gives the RM 35-02 the light wrist presence buyers expect from a TPT-and-carbon Richard Mille built for tennis-grade movement. The 49.94mm by 44.50mm tonneau case wears closer to a 44mm round watch on the wrist due to the curved geometry and the short integrated lugs, and the 13.55mm height clears most shirt cuffs. The RM 35-02 super clone sits comfortably on wrists from 6.5 to 8 inches with the titanium folding buckle adjusted across the strap holes. The duotone rubber stays flexible through repeated wear and resists the heat and moisture buyers expect to face during active use.