Richard Mille RM 11-03 Super Clone : Standard Titanium Automatic Flyback Chronograph

Tonneau Case, Spline Screws and Pusher Profile — 50mm Grade 5 Titanium Build

The standard titanium RM 11-03 Super Clone carries a tonneau case measuring 50mm long by 42.70mm wide and 16.15mm thick, machined to the curved third-generation RM 011 silhouette that Richard Mille refined for the 2016 release. Six grade 5 titanium spline screws lock the bezel to the caseband, threading through the engineered face that the RM 011 family made a brand signature. The flyback chronograph pushers sit at 2 and 8 with crown placement at 4-5, and the function selector pusher at 4-5 cycles the NEUTRAL-WIND-DATE-TIME modes that route crown input to the correct function. The screw-down crown seals the case for water resistance to 50 meters, in line with the sports positioning of the RM 11-03.

Grade 5 Titanium Construction with Polished and Satin Finishing

The full grade 5 titanium case of the RM 11-03 Super Clone delivers a strong, light tonneau structure that holds the watch under 90 grams on the wrist. Grade 5 titanium, the aerospace-grade Ti-6Al-4V alloy, gives the case the corrosion resistance and the hypoallergenic surface that buyers expect from a Richard Mille sports reference. The titanium surfaces carry the polished and satin finishing contrast that the genuine third-generation RM 011 production introduced, with polished bevels along the bezel edges and satin sweeps across the caseband flanks. This super clone follows the genuine titanium build so the RM 11-03 reads correctly under close inspection on weight, surface texture, and the finishing transitions across the tonneau geometry.

Sapphire Crystal and Sapphire Caseback Over Skeleton Architecture

Scratch-resistant sapphire crystal with anti-reflective coating covers the skeletonised dial and frames the flyback chronograph layout under angled light. The curved sapphire follows the tonneau profile and stays optically clear at the dial edges, which is where the RM 11-03 wearing position usually sits on the wrist. The sapphire caseback shows the RMAC3 clone movement from below, including the variable geometry rotor sweep and the grade 5 titanium baseplate and bridges. The screw-down crown supports the 50-meter water resistance for daily wear and hand washing.

Skeletonised Dial with Oversized Date at 12 and Flyback Counter at 4-5

The skeletonised dial of the RM 11-03 Super Clone shows the movement bridges and the gear train from the front, with the upper bridge carrying the applied "Richard Mille" branding and the lower section opening onto the flyback chronograph wheel. The oversized date frame sits at 12 in a black-and-white drum window, a redesigned third-generation feature that the RM 11-03 introduced over the earlier RM 011 date placement. The flyback chronograph 30-minute counter reads at 4-5, the small seconds runs at 9, and the central seconds doubles as the chronograph seconds hand under flyback control. This super clone matches the bridge cut-out shape, the sub-counter geometry, and the date frame proportions of the genuine standard titanium reference.

Applied White-Gold Markers, Hands and Function Selector Readout

The RM 11-03 carries applied white-gold hour markers placed around the chapter ring, with white-coated skeleton baton hands for the hours and minutes. The applied markers and hands carry luminous coating on the upper face for reliable low-light reading. A printed function selector readout sits adjacent to the 4-5 pusher zone, showing the active NEUTRAL-WIND-DATE-TIME mode through a small indicator. The sub-counter rings carry printed scales in white against the open bridge backdrop, with the 30-minute flyback scale graduated in single-minute increments. The marker placement, the hand profile, and the function selector readout follow the standard titanium reference layout.

Tonneau Layout and Flyback Chronograph Legibility

The tonneau case shape extends the dial vertically, which gives the skeletonised display the real estate to host the oversized date at 12, the small seconds at 9, the flyback counter at 4-5, and the central chronograph hand without crowding the chapter ring. The applied white-gold markers carry strong contrast against the open bridge backdrop, and the chapter ring carries the minute track around the outer edge for precise reading. The flyback chronograph reset returns the central seconds and the 30-minute counter to zero with a single pusher press, which is the operational reason buyers choose a flyback complication over a standard chronograph layout.

Swiss-Grade RMAC3 Clone Automatic Flyback Chronograph Movement

The Richard Mille RM 11-03 super clone runs on a Swiss-grade automatic flyback chronograph movement engineered to match the genuine Richard Mille RMAC3 caliber in feel, frequency, layout, and architecture. The movement operates at 28,800 vibrations per hour, winds automatically through a variable geometry rotor, and holds a power reserve of approximately 55 hours for over two days off the wrist. The caliber drives the central hours and minutes, the small seconds at 9, the flyback chronograph with 30-minute counter at 4-5, the oversized date at 12, and the function selector logic that routes the crown through NEUTRAL, WIND, DATE, and TIME modes. The RMAC3 is the upgraded successor to the RMAC1, with an improved oscillator and a redesigned date system that the third-generation RM 11-03 carries.

Variable Geometry Rotor, Accuracy and Flyback Reset Behaviour

The variable geometry rotor lets the wearer tune the winding response to wrist activity, and the super clone carries the rotor architecture with adjustable inertia segments that the genuine RMAC3 introduced. Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer band that buyers expect from a Swiss-grade automatic flyback build. The flyback function lets the wearer reset the chronograph from a running state with a single pusher press, which restarts the timing instantly without stopping the movement first. The grade 5 titanium baseplate and bridges keep the movement light and shock-resistant during sport use, which is the architectural reasoning behind the genuine RMAC3. The 50-meter water resistance and the screw-down crown let the RM 11-03 super clone hold its seal through daily wear, hand washing, and light water contact.

Spec grid:

Black Rubber Strap and Grade 5 Titanium Folding Buckle

The standard titanium RM 11-03 Super Clone carries a black rubber strap, the strap style Richard Mille pairs with the catalogue titanium configuration of the third-generation RM 011 line. The strap uses a soft, flexible rubber compound with raised lateral ribs and a textured underside, integrated lugs that flow into the tonneau case, and the continuous Richard Mille silhouette across the wrist. A grade 5 titanium folding buckle closes flush against the wrist for a secure hold and lets the buyer remove the watch without flexing the strap repeatedly. The buckle carries the polished and satin finishing contrast that matches the case, with engraved Richard Mille branding on the outer plate.

Wrist Feel, Sizing and Comfort

The watch weighs approximately 90 grams on the full black rubber strap, which gives the RM 11-03 the light wrist presence buyers expect from an all-titanium Richard Mille chronograph. The 50mm by 42.70mm tonneau case wears closer to a 44mm round watch on the wrist due to the curved geometry and the short lug span, and the 16.15mm height clears most shirt cuffs once the wearer sets the buckle on the right hole. The RM 11-03 super clone sits comfortably on wrists from 6.5 to 8 inches with the folding buckle adjusted across the strap holes, and the rubber compound flexes against skin warmth for an immediate fit on the first wear.