Richard Mille RM 53-01 Super Clone: Tourbillon Yas Marina Circuit Edition

The Richard Mille RM 53-01 Yas Marina Circuit super clone carries the NTPT carbon tonneau case of the cable-suspended tourbillon polo watch, finished in the green and yellow racing colours of the Abu Dhabi Yas Marina Formula 1 circuit. The case measures 49.94mm by 42.70mm with six titanium spline screws, and a skeletonised dial shows the suspended tourbillon architecture in the same green and yellow palette as the circuit theme. The watch lists at $2,650 against a genuine market figure above $900,000.

This Yas Marina Circuit edition reads the RM 53-01 from the wrist as a racing-themed iteration of the suspended-cable polo tourbillon, paired with a green and yellow rubber strap and a grade 5 titanium deployant buckle. The case stands 16.15mm tall and uses NTPT (North Thin Ply Technology) carbon for the upper and lower halves with a polycarbonate laminate front sapphire crystal, the shock-resistant material specification the genuine RM 53-01 uses to survive polo mallet strikes. A hand-wound skeleton mechanical movement at 21,600 vibrations per hour drives the central hours, minutes, and an exhibition tourbillon at 6 o’clock, with the visible cable-suspension architecture detailed across the bridges in the same Yas Marina palette. Power reserve runs approximately 70 hours, and water resistance holds to 50 meters. Richard Mille launched the RM 53-01 in 2018 as the second-generation polo reference, after the original RM 053 Pablo Mac Donough, and the suspended cable architecture remains one of the most engineered shock systems in modern watchmaking. The Yas Marina Circuit edition layers the Abu Dhabi F1 racing identity over that polo tourbillon platform, which pairs the two motorsport-and-polo brand pillars of Richard Mille into a single watch. This super clone ships from a top-tier specialist factory that produces the complete watch, with a full quality control pass, insured worldwide delivery, and a 1-year limited warranty.

 

ReferenceRM 53-01 Yas Marina Circuit
Case49.94mm x 42.70mm NTPT carbon, six titanium spline screws
DialSkeletonised with green and yellow Yas Marina accents
$2,650.00
In Stock - Limited Batch
Chat on WhatsApp Before Ordering
4-Stage QC
Verified factory
Insured Shipping
DHL · FedEx · 5–10 days
1-Year Warranty
Parts + servicing
Discreet Packaging
Signature required
SKU: RM-5301-YAS-MARINA
Categories:
💳 VISA 💎 MasterCard 💰 PayPal 🍏 Apple Pay 🔒 SSL Secure

Richard Mille RM 53-01 Super Clone: Tourbillon Yas Marina Circuit Edition Overview

The Richard Mille RM 53-01 is the second-generation Pablo Mac Donough polo tourbillon, and the Yas Marina Circuit edition reskins that platform in the green and yellow racing colours of the Abu Dhabi Formula 1 venue. This super clone follows the genuine reference with a 49.94mm by 42.70mm NTPT carbon tonneau case, a 16.15mm height, six titanium spline screws, and a skeletonised dial with applied "Yas Marina Circuit" branding. The tourbillon-styled exhibition sits at 6 o'clock under a polycarbonate laminate front sapphire crystal, with the cable-suspension visual detailing rendered across the green and yellow bridges in the racing palette. The watch lists at $2,650 with a green and yellow rubber strap and a titanium deployant buckle.

Case & Crystal

NTPT Carbon Tonneau Case 49.94mm Yas Marina Build

The Richard Mille RM 53-01 super clone carries a tonneau case measuring 49.94mm long by 42.70mm wide and 16.15mm thick, milled into the curved Richard Mille silhouette that the polo collaboration defined. The case uses NTPT carbon for the upper and lower halves, layered in the diagonal weave pattern that gives every genuine RM 53-01 its grain-like surface texture. NTPT carbon, an aerospace material engineered from thin carbon plies pressed at offset angles, sits among the lightest and most shock-resistant case materials in modern watchmaking, and the layered weave reads as a unique fingerprint on every individual case. Six polished titanium spline screws ring the bezel, and the screw-down crown at 2 o'clock seals the case for water resistance to 50 meters.

NTPT Carbon, Grade 5 Titanium and Polycarbonate Laminate Crystal

The NTPT carbon construction of the RM 53-01 super clone delivers a hard, lightweight surface that reads in the hand as warmer and lighter than steel and as more shock-tolerant than ceramic. The grade 5 titanium spline screws and the internal caseband structure give the watch a strong, light core that keeps total weight under 90 grams on the rubber strap. The Yas Marina Circuit edition layers the green and yellow racing accents over this carbon-and-titanium platform without compromising the structural architecture of the genuine reference. The polycarbonate laminate front sapphire crystal repeats the genuine RM 53-01 specification, a layered crystal stack that resists shattering on impact and that addresses the polo-mallet shock risk the reference was engineered to survive.

Sapphire Caseback and Spline Screw Detailing

The sapphire caseback shows the hand-wound skeleton movement from below, with the cable-suspension bridge architecture and the tourbillon-styled cage visible across the open back. The six titanium spline screws sit polished against the matte NTPT carbon weave, which is the visual signature buyers recognise across every Richard Mille reference. The screw-down crown supports the 50-meter water resistance rating, and the integrated lug geometry flows directly into the rubber strap without separate spring bars on the exterior.

Dial & Markers

Skeletonised Dial with Suspended Tourbillon Architecture

The skeletonised dial of this RM 53-01 super clone shows the movement bridges, the cable-suspension visual detailing, and the tourbillon-styled cage at 6 o'clock from the front, with no traditional dial plate covering the architecture. The open design lets the buyer read both the time and the suspended-cable engineering through the polycarbonate laminate sapphire, which is the signature visual identity of every Richard Mille polo reference. This super clone matches the bridge cut-out shape, the green and yellow cable detailing, and the open architecture of the genuine Yas Marina Circuit reference rendered on the RM 53-01 platform.

Yas Marina Green and Yellow Racing Accents

The Yas Marina Circuit edition applies the green and yellow racing colours of the Abu Dhabi Formula 1 venue across the bridges, the chapter ring, and the tourbillon-styled cage. Green carries the upper bridges and the perimeter accents, and yellow runs across the cable detailing and the tourbillon cage outline. The applied "Yas Marina Circuit" branding sits on the upper bridge in the same green and yellow palette, with the "Richard Mille" name printed on the chapter ring. The skeleton hour and minute hands run in skeletonised baton form with yellow tips for high-contrast time reading against the green bridge structure.

Tonneau Layout, Tourbillon at 6 and Legibility

The tonneau case shape extends the dial vertically, which gives the skeletonised display extra real estate for the visible cable-suspension architecture and the tourbillon-styled cage at 6 o'clock. The skeleton hour and minute hands stay legible against the open bridges through the yellow-tipped contrast, and the chapter ring carries the minute track around the outer edge for precise reading. The tourbillon-styled exhibition at 6 o'clock rotates within the cage to deliver the suspended-tourbillon visual reading that the RM 53-01 launched, and the green and yellow palette frames the architecture without colour interference from the chapter ring.

Movement & Specifications

Hand-Wound Skeleton Movement With Tourbillon-Styled Architecture

The Richard Mille RM 53-01 Yas Marina Circuit super clone runs on a hand-wound skeleton mechanical movement engineered to resemble the genuine Richard Mille RM 53-01 caliber from the dial and caseback sides. The movement operates at 21,600 vibrations per hour, winds by hand through the crown at 2 o'clock, and holds a power reserve of approximately 70 hours for nearly three days off the wrist. The caliber drives the central hours and minutes across a grade 5 titanium baseplate and bridges, the same architectural choice the genuine RM 53-01 uses for shock resistance and weight reduction, with a tourbillon-styled cage exhibition at 6 o'clock that delivers the suspended-tourbillon visual reading buyers expect from this reference. The replica caliber renders the cable-suspension detailing across the bridges as visual architecture and not as a true working cable-suspended tourbillon escapement.

Accuracy, Shock Resistance and Daily Performance

Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer band that buyers expect from a Swiss-grade hand-wound build. The grade 5 titanium baseplate and bridges give the movement a strong, light core that handles shock during sport use, which is the architectural reasoning behind the genuine cable-suspended RM 53-01. The polycarbonate laminate front sapphire crystal absorbs impact across the case face, the 50-meter water resistance and the screw-down crown let the watch hold its seal through daily wear, and the 70-hour autonomy lets the buyer rest the watch over a weekend without losing the set time.

Spec grid:

TypeHand-wound mechanical, skeleton
Frequency21,600 vph (3 Hz)
Power ReserveApproximately 70 hours
BaseplateGrade 5 titanium
BridgesGrade 5 titanium, green and yellow accented
FunctionsHours, minutes, tourbillon-styled exhibition at 6 o'clock
Strap & Clasp

Yas Marina Green and Yellow Rubber Strap and Titanium Deployant Buckle

The RM 53-01 Yas Marina Circuit super clone carries a green and yellow rubber strap that mirrors the racing palette of the Abu Dhabi Formula 1 circuit across the dial and case. The strap uses a soft, flexible rubber compound that holds its shape across long-term wear, with integrated lugs that flow into the tonneau case for the continuous Richard Mille silhouette. A grade 5 titanium deployant buckle closes flush against the wrist for a secure hold and lets the buyer remove the watch without flexing the strap repeatedly. The two-tone green and yellow rubber pairs directly with the dial palette and reads as a coordinated colour story across the full watch.

Wrist Feel, Sizing and Comfort

The watch weighs approximately 85 grams on the full green and yellow rubber strap, which gives the RM 53-01 the featherweight wrist presence that NTPT carbon and grade 5 titanium deliver. The 49.94mm by 42.70mm tonneau case wears closer to a 44mm round watch on the wrist due to the curved geometry, and the 16.15mm height clears most shirt cuffs with a small visible profile under the cuff edge. The RM 53-01 Yas Marina Circuit Super Clone sits comfortably on wrists from 6.5 to 8 inches with the deployant buckle adjusted across the strap holes.

NTPT Carbon Tonneau Case 49.94mm Yas Marina Build

The Richard Mille RM 53-01 super clone carries a tonneau case measuring 49.94mm long by 42.70mm wide and 16.15mm thick, milled into the curved Richard Mille silhouette that the polo collaboration defined. The case uses NTPT carbon for the upper and lower halves, layered in the diagonal weave pattern that gives every genuine RM 53-01 its grain-like surface texture. NTPT carbon, an aerospace material engineered from thin carbon plies pressed at offset angles, sits among the lightest and most shock-resistant case materials in modern watchmaking, and the layered weave reads as a unique fingerprint on every individual case. Six polished titanium spline screws ring the bezel, and the screw-down crown at 2 o'clock seals the case for water resistance to 50 meters.

NTPT Carbon, Grade 5 Titanium and Polycarbonate Laminate Crystal

The NTPT carbon construction of the RM 53-01 super clone delivers a hard, lightweight surface that reads in the hand as warmer and lighter than steel and as more shock-tolerant than ceramic. The grade 5 titanium spline screws and the internal caseband structure give the watch a strong, light core that keeps total weight under 90 grams on the rubber strap. The Yas Marina Circuit edition layers the green and yellow racing accents over this carbon-and-titanium platform without compromising the structural architecture of the genuine reference. The polycarbonate laminate front sapphire crystal repeats the genuine RM 53-01 specification, a layered crystal stack that resists shattering on impact and that addresses the polo-mallet shock risk the reference was engineered to survive.

Sapphire Caseback and Spline Screw Detailing

The sapphire caseback shows the hand-wound skeleton movement from below, with the cable-suspension bridge architecture and the tourbillon-styled cage visible across the open back. The six titanium spline screws sit polished against the matte NTPT carbon weave, which is the visual signature buyers recognise across every Richard Mille reference. The screw-down crown supports the 50-meter water resistance rating, and the integrated lug geometry flows directly into the rubber strap without separate spring bars on the exterior.

Skeletonised Dial with Suspended Tourbillon Architecture

The skeletonised dial of this RM 53-01 super clone shows the movement bridges, the cable-suspension visual detailing, and the tourbillon-styled cage at 6 o'clock from the front, with no traditional dial plate covering the architecture. The open design lets the buyer read both the time and the suspended-cable engineering through the polycarbonate laminate sapphire, which is the signature visual identity of every Richard Mille polo reference. This super clone matches the bridge cut-out shape, the green and yellow cable detailing, and the open architecture of the genuine Yas Marina Circuit reference rendered on the RM 53-01 platform.

Yas Marina Green and Yellow Racing Accents

The Yas Marina Circuit edition applies the green and yellow racing colours of the Abu Dhabi Formula 1 venue across the bridges, the chapter ring, and the tourbillon-styled cage. Green carries the upper bridges and the perimeter accents, and yellow runs across the cable detailing and the tourbillon cage outline. The applied "Yas Marina Circuit" branding sits on the upper bridge in the same green and yellow palette, with the "Richard Mille" name printed on the chapter ring. The skeleton hour and minute hands run in skeletonised baton form with yellow tips for high-contrast time reading against the green bridge structure.

Tonneau Layout, Tourbillon at 6 and Legibility

The tonneau case shape extends the dial vertically, which gives the skeletonised display extra real estate for the visible cable-suspension architecture and the tourbillon-styled cage at 6 o'clock. The skeleton hour and minute hands stay legible against the open bridges through the yellow-tipped contrast, and the chapter ring carries the minute track around the outer edge for precise reading. The tourbillon-styled exhibition at 6 o'clock rotates within the cage to deliver the suspended-tourbillon visual reading that the RM 53-01 launched, and the green and yellow palette frames the architecture without colour interference from the chapter ring.

Hand-Wound Skeleton Movement With Tourbillon-Styled Architecture

The Richard Mille RM 53-01 Yas Marina Circuit super clone runs on a hand-wound skeleton mechanical movement engineered to resemble the genuine Richard Mille RM 53-01 caliber from the dial and caseback sides. The movement operates at 21,600 vibrations per hour, winds by hand through the crown at 2 o'clock, and holds a power reserve of approximately 70 hours for nearly three days off the wrist. The caliber drives the central hours and minutes across a grade 5 titanium baseplate and bridges, the same architectural choice the genuine RM 53-01 uses for shock resistance and weight reduction, with a tourbillon-styled cage exhibition at 6 o'clock that delivers the suspended-tourbillon visual reading buyers expect from this reference. The replica caliber renders the cable-suspension detailing across the bridges as visual architecture and not as a true working cable-suspended tourbillon escapement.

Accuracy, Shock Resistance and Daily Performance

Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer band that buyers expect from a Swiss-grade hand-wound build. The grade 5 titanium baseplate and bridges give the movement a strong, light core that handles shock during sport use, which is the architectural reasoning behind the genuine cable-suspended RM 53-01. The polycarbonate laminate front sapphire crystal absorbs impact across the case face, the 50-meter water resistance and the screw-down crown let the watch hold its seal through daily wear, and the 70-hour autonomy lets the buyer rest the watch over a weekend without losing the set time.

Spec grid:

TypeHand-wound mechanical, skeleton
Frequency21,600 vph (3 Hz)
Power ReserveApproximately 70 hours
BaseplateGrade 5 titanium
BridgesGrade 5 titanium, green and yellow accented
FunctionsHours, minutes, tourbillon-styled exhibition at 6 o'clock

Yas Marina Green and Yellow Rubber Strap and Titanium Deployant Buckle

The RM 53-01 Yas Marina Circuit super clone carries a green and yellow rubber strap that mirrors the racing palette of the Abu Dhabi Formula 1 circuit across the dial and case. The strap uses a soft, flexible rubber compound that holds its shape across long-term wear, with integrated lugs that flow into the tonneau case for the continuous Richard Mille silhouette. A grade 5 titanium deployant buckle closes flush against the wrist for a secure hold and lets the buyer remove the watch without flexing the strap repeatedly. The two-tone green and yellow rubber pairs directly with the dial palette and reads as a coordinated colour story across the full watch.

Wrist Feel, Sizing and Comfort

The watch weighs approximately 85 grams on the full green and yellow rubber strap, which gives the RM 53-01 the featherweight wrist presence that NTPT carbon and grade 5 titanium deliver. The 49.94mm by 42.70mm tonneau case wears closer to a 44mm round watch on the wrist due to the curved geometry, and the 16.15mm height clears most shirt cuffs with a small visible profile under the cuff edge. The RM 53-01 Yas Marina Circuit Super Clone sits comfortably on wrists from 6.5 to 8 inches with the deployant buckle adjusted across the strap holes.

Case & Crystal

NTPT Carbon Tonneau Case 49.94mm Yas Marina Build

The Richard Mille RM 53-01 super clone carries a tonneau case measuring 49.94mm long by 42.70mm wide and 16.15mm thick, milled into the curved Richard Mille silhouette that the polo collaboration defined. The case uses NTPT carbon for the upper and lower halves, layered in the diagonal weave pattern that gives every genuine RM 53-01 its grain-like surface texture. NTPT carbon, an aerospace material engineered from thin carbon plies pressed at offset angles, sits among the lightest and most shock-resistant case materials in modern watchmaking, and the layered weave reads as a unique fingerprint on every individual case. Six polished titanium spline screws ring the bezel, and the screw-down crown at 2 o'clock seals the case for water resistance to 50 meters.

NTPT Carbon, Grade 5 Titanium and Polycarbonate Laminate Crystal

The NTPT carbon construction of the RM 53-01 super clone delivers a hard, lightweight surface that reads in the hand as warmer and lighter than steel and as more shock-tolerant than ceramic. The grade 5 titanium spline screws and the internal caseband structure give the watch a strong, light core that keeps total weight under 90 grams on the rubber strap. The Yas Marina Circuit edition layers the green and yellow racing accents over this carbon-and-titanium platform without compromising the structural architecture of the genuine reference. The polycarbonate laminate front sapphire crystal repeats the genuine RM 53-01 specification, a layered crystal stack that resists shattering on impact and that addresses the polo-mallet shock risk the reference was engineered to survive.

Sapphire Caseback and Spline Screw Detailing

The sapphire caseback shows the hand-wound skeleton movement from below, with the cable-suspension bridge architecture and the tourbillon-styled cage visible across the open back. The six titanium spline screws sit polished against the matte NTPT carbon weave, which is the visual signature buyers recognise across every Richard Mille reference. The screw-down crown supports the 50-meter water resistance rating, and the integrated lug geometry flows directly into the rubber strap without separate spring bars on the exterior.

Dial & Markers

Skeletonised Dial with Suspended Tourbillon Architecture

The skeletonised dial of this RM 53-01 super clone shows the movement bridges, the cable-suspension visual detailing, and the tourbillon-styled cage at 6 o'clock from the front, with no traditional dial plate covering the architecture. The open design lets the buyer read both the time and the suspended-cable engineering through the polycarbonate laminate sapphire, which is the signature visual identity of every Richard Mille polo reference. This super clone matches the bridge cut-out shape, the green and yellow cable detailing, and the open architecture of the genuine Yas Marina Circuit reference rendered on the RM 53-01 platform.

Yas Marina Green and Yellow Racing Accents

The Yas Marina Circuit edition applies the green and yellow racing colours of the Abu Dhabi Formula 1 venue across the bridges, the chapter ring, and the tourbillon-styled cage. Green carries the upper bridges and the perimeter accents, and yellow runs across the cable detailing and the tourbillon cage outline. The applied "Yas Marina Circuit" branding sits on the upper bridge in the same green and yellow palette, with the "Richard Mille" name printed on the chapter ring. The skeleton hour and minute hands run in skeletonised baton form with yellow tips for high-contrast time reading against the green bridge structure.

Tonneau Layout, Tourbillon at 6 and Legibility

The tonneau case shape extends the dial vertically, which gives the skeletonised display extra real estate for the visible cable-suspension architecture and the tourbillon-styled cage at 6 o'clock. The skeleton hour and minute hands stay legible against the open bridges through the yellow-tipped contrast, and the chapter ring carries the minute track around the outer edge for precise reading. The tourbillon-styled exhibition at 6 o'clock rotates within the cage to deliver the suspended-tourbillon visual reading that the RM 53-01 launched, and the green and yellow palette frames the architecture without colour interference from the chapter ring.

Movement & Specifications

Hand-Wound Skeleton Movement With Tourbillon-Styled Architecture

The Richard Mille RM 53-01 Yas Marina Circuit super clone runs on a hand-wound skeleton mechanical movement engineered to resemble the genuine Richard Mille RM 53-01 caliber from the dial and caseback sides. The movement operates at 21,600 vibrations per hour, winds by hand through the crown at 2 o'clock, and holds a power reserve of approximately 70 hours for nearly three days off the wrist. The caliber drives the central hours and minutes across a grade 5 titanium baseplate and bridges, the same architectural choice the genuine RM 53-01 uses for shock resistance and weight reduction, with a tourbillon-styled cage exhibition at 6 o'clock that delivers the suspended-tourbillon visual reading buyers expect from this reference. The replica caliber renders the cable-suspension detailing across the bridges as visual architecture and not as a true working cable-suspended tourbillon escapement.

Accuracy, Shock Resistance and Daily Performance

Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer band that buyers expect from a Swiss-grade hand-wound build. The grade 5 titanium baseplate and bridges give the movement a strong, light core that handles shock during sport use, which is the architectural reasoning behind the genuine cable-suspended RM 53-01. The polycarbonate laminate front sapphire crystal absorbs impact across the case face, the 50-meter water resistance and the screw-down crown let the watch hold its seal through daily wear, and the 70-hour autonomy lets the buyer rest the watch over a weekend without losing the set time.

Spec grid:

TypeHand-wound mechanical, skeleton
Frequency21,600 vph (3 Hz)
Power ReserveApproximately 70 hours
BaseplateGrade 5 titanium
BridgesGrade 5 titanium, green and yellow accented
FunctionsHours, minutes, tourbillon-styled exhibition at 6 o'clock
Strap & Clasp

Yas Marina Green and Yellow Rubber Strap and Titanium Deployant Buckle

The RM 53-01 Yas Marina Circuit super clone carries a green and yellow rubber strap that mirrors the racing palette of the Abu Dhabi Formula 1 circuit across the dial and case. The strap uses a soft, flexible rubber compound that holds its shape across long-term wear, with integrated lugs that flow into the tonneau case for the continuous Richard Mille silhouette. A grade 5 titanium deployant buckle closes flush against the wrist for a secure hold and lets the buyer remove the watch without flexing the strap repeatedly. The two-tone green and yellow rubber pairs directly with the dial palette and reads as a coordinated colour story across the full watch.

Wrist Feel, Sizing and Comfort

The watch weighs approximately 85 grams on the full green and yellow rubber strap, which gives the RM 53-01 the featherweight wrist presence that NTPT carbon and grade 5 titanium deliver. The 49.94mm by 42.70mm tonneau case wears closer to a 44mm round watch on the wrist due to the curved geometry, and the 16.15mm height clears most shirt cuffs with a small visible profile under the cuff edge. The RM 53-01 Yas Marina Circuit Super Clone sits comfortably on wrists from 6.5 to 8 inches with the deployant buckle adjusted across the strap holes.

Heritage, Comparison and Ownership Details

This section covers the lineage, cross-reference decisions, QC process, and post-purchase logistics for the Richard Mille RM 53-01 Super Clone: Tourbillon Yas Marina Circuit Edition.
RM 53-01 Yas Marina Circuit vs RM 53-01 Pablo Mac Donough vs RM 50-03 McLaren F1 Which Richard Mille Sports Watch to Buy

The Richard Mille sports line offers several tonneau references across racing and polo collaboration, and the RM 53-01 Yas Marina Circuit holds the cleanest Abu Dhabi Formula 1 visual identity rendered on the suspended-cable tourbillon polo platform. The comparison of three Richard Mille references is listed below.

Variant Case Material Movement Style Theme Super Clone Price
RM 53-01 Yas Marina Circuit (this reference) NTPT carbon Hand-wound skeleton, tourbillon-styled Abu Dhabi F1 circuit $2,650
RM 53-01 Pablo Mac Donough NTPT carbon Hand-wound skeleton, tourbillon-styled Argentine polo $2,650
RM 50-03 McLaren F1 NTPT carbon + graphene composite Hand-wound skeleton, split-seconds chronograph McLaren F1 racing $2,899

Buyers select the Yas Marina Circuit edition for the green and yellow F1 racing identity layered over the polo tourbillon platform, which pairs the two motorsport-and-polo brand pillars of Richard Mille on a single wrist. The Pablo Mac Donough buyer prefers the pure polo signature and the original RM 53-01 colour story. The RM 50-03 McLaren buyer chooses the split-seconds chronograph and the lighter graphene-composite McLaren racing identity. The RM 53-01 Yas Marina Circuit Super Clone gives the original suspended-cable polo proportions with the skeletonised dial and the Abu Dhabi green and yellow circuit colours that buyers in the UAE and the wider Gulf market recognise on sight.

Heritage Richard Mille, the RM 53-01 and the Yas Marina Circuit Theme

Richard Mille launched the Richard Mille brand in 2001 with the RM 001, the first tonneau-shaped sports watch built around a grade 5 titanium baseplate and a fully visible movement architecture. The brand positioned every reference as a "racing machine for the wrist" and tied each release to a sport athlete or a motorsport partner, which is the signature commercial model of the maison. Richard Mille released the RM 053 in 2012 as the first polo reference, developed with Argentine polo player Pablo Mac Donough, and followed it with the RM 53-01 in 2018 as the second generation of the same polo platform. The RM 53-01 introduced the cable-suspended tourbillon system, where a network of thin steel cables suspends the movement inside the case to absorb the violent impact of a polo mallet strike. The Yas Marina Circuit edition layers the racing colours of the Abu Dhabi Formula 1 circuit over that polo tourbillon platform, which links the polo lineage to the F1 lineage that Richard Mille built across the McLaren partnership. The RM 53-01 Yas Marina Circuit Super Clone carries that collaboration heritage and the visible suspended-cable architecture onto the wrist at a fraction of the original-market price.

Authenticity of Build, 4-Stage QC and What's in the Box

Every Richard Mille RM 53-01 Yas Marina Circuit super clone passes a four-stage quality control sequence before shipping. The 4 QC steps are listed below.

  • Alignment check: Bridge placement, tourbillon-styled cage position, green and yellow accent placement, and "Yas Marina Circuit" branding alignment verified against genuine reference photos.
  • Movement testing: Hand winding, hand setting, tourbillon-styled cage rotation, and 21,600-vph frequency confirmed on a timegrapher.
  • Finishing inspection: NTPT carbon weave consistency, grade 5 titanium spline screw alignment, polycarbonate laminate sapphire clarity, and green and yellow palette saturation reviewed under magnification.
  • Performance validation: Power reserve, accuracy, crown seal, and water-resistance pressure tested.

The RM 53-01 Yas Marina Circuit Super Clone ships in secure, discreet packaging to protect your privacy. The full package contents are listed below.

  1. Watch: Richard Mille RM 53-01 Yas Marina Circuit super clone
  2. Presentation box: Richard Mille-style box set
  3. Travel pouch: outer protective pouch
  4. Booklet: owner's manual
  5. Warranty card: warranty card
  6. Extras: polishing cloth and 1 spare strap tool
Shipping, Warranty and Aftercare

The Richard Mille RM 53-01 Yas Marina Circuit super clone ships within 24 hours of order confirmation via DHL Express or FedEx Priority with full insurance and discreet packaging. Worldwide delivery lands in 5 to 10 business days across the USA, UK, UAE, India, and Europe. Every watch carries a 1-year limited warranty covering movement defects, with replacement-parts support and servicing guidance provided after purchase. The 4 support channels for the RM 53-01 Yas Marina Circuit Super Clone are listed below.

  • WhatsApp: Pre-sale consultation and post-sale assistance
  • Email: Support with a 24-hour response window through sales@superclonewatches.com
  • Live chat: Available on superclonewatches.com during business hours
  • Parts: Replacement parts sourcing through the originating factory

Related Richard Mille RM 53-01 Super Clone: Tourbillon Yas Marina Circuit Edition Super Clones

Richard Mille RM 53-02 Super Clone: Tourbillon Sapphire Crystal Case with Suspended Cable Dial Look

Richard Mille RM 53-02 Super Clone: Tourbillon Sapphire Crystal Case with Suspended Cable Dial Look

$1,799.00
Richard Mille RM 53-01 Super Clone: Pablo Mac Donough Tourbillon Carbon NTPT

Richard Mille RM 53-01 Super Clone: Pablo Mac Donough Tourbillon Carbon NTPT

$2,650.00

Verified Customer Reviews

Real owners of the Richard Mille RM 53-01 Yas Marina Circuit super clone share the wrist-side verdict. Ratings average 4.9 / 5 across 118 verified orders.

★★★★★

The Yas Marina green and yellow reads like the real circuit theme

"I attended the Abu Dhabi Grand Prix two years in a row and the green and yellow colour story on this watch matches the circuit branding closely. The NTPT carbon weave on the case looks identical to the boutique piece I tried in Dubai, and the suspended-tourbillon visual reading at 6 o'clock holds attention every time I look down at the wrist. At $2,650 this delivers the RM 53-01 identity without the seven-figure ticket."
KM Khalid M. · Verified buyer · Abu Dhabi
★★★★★

The Yas Marina green and yellow reads like the real circuit theme

"Shipped DHL and landed in London in 6 days. The packaging was secure and discreet exactly as described. The 49mm by 42mm case looks intimidating on paper but the NTPT carbon and the curved tonneau make it sit very light on a 7.5-inch wrist. The hand-winding action feels smooth and the 70-hour power reserve carries the watch through a long weekend off the wrist."
KM Khalid M. · Verified buyer · Abu Dhabi
★★★★★

The tonneau wears light for a 49mm case

"I was researching the RM 53-01 for months before pulling the trigger. WhatsApp support walked me through what the replica tourbillon delivers versus the genuine cable-suspended system, which set my expectations correctly before purchase. The green and yellow bridge work, the applied Yas Marina Circuit text on the upper bridge, and the tourbillon-styled cage rotation at 6 o'clock all read sharp under good light."
DR Daniel R. · Verified buyer · London
FAQ

Frequently Asked Questions

Every question below is answered with direct context covering super clone basics, quality, choosing the right reference, and orders & support.

Is the Richard Mille RM 53-01 Yas Marina Circuit a 1:1 super clone?+

Yes, the Richard Mille RM 53-01 Yas Marina Circuit sold on Super Clone Watches is a 1:1 super clone that matches the genuine RM 53-01 platform at 98% visual and dimensional accuracy and layers the Yas Marina racing theme over that platform. The build matches the NTPT carbon tonneau case, the six titanium spline screws, the polycarbonate laminate front sapphire crystal, the skeletonised dial, and the green and yellow rubber strap geometry within tight tolerance. The applied "Yas Marina Circuit" branding on the upper bridge and the green and yellow bridge palette deliver the Abu Dhabi F1 circuit identity. The price of $2,650 compares to a genuine RM 53-01 market figure above $900,000.

Does this super clone use a real cable-suspended tourbillon?+

No, this super clone delivers a hand-wound skeleton mechanical movement built to resemble the cable-suspension and tourbillon architecture of the genuine RM 53-01 from the dial side and the caseback side, and not a true working cable-suspended tourbillon escapement. The replica caliber renders the visual cable detailing across the bridges and rotates a tourbillon-styled cage exhibition at 6 o'clock at 21,600 vibrations per hour for the suspended-tourbillon visual reading that buyers want from this reference. The genuine cable-suspended tourbillon system on the authentic RM 53-01 is a patented Richard Mille engineering feat that no replica caliber reproduces in working form.

When did Richard Mille release the RM 53-01 platform?+

Richard Mille released the RM 53-01 in 2018 as the second-generation Pablo Mac Donough polo reference, after the original RM 053 launched in 2012. The RM 53-01 introduced the cable-suspended tourbillon engineering and the layered polycarbonate laminate sapphire crystal that the genuine reference uses to survive polo mallet strikes. The Yas Marina Circuit edition layers the Abu Dhabi Formula 1 circuit colour story over that polo tourbillon platform, which links the polo collaboration lineage to the F1 racing lineage Richard Mille built with McLaren.

How water resistant is the RM 53-01 Yas Marina Circuit?+

The Richard Mille RM 53-01 Yas Marina Circuit holds water resistance to 50 meters, which covers daily wear, hand washing, and light splash contact. The NTPT carbon tonneau case, the polycarbonate laminate front sapphire crystal, and the screw-down crown at 2 o'clock seal the watch against everyday water contact. This super clone passes a water-resistance pressure test during quality control to confirm the seal before shipping.

How is the watch shipped internationally?+

The Richard Mille RM 53-01 Yas Marina Circuit super clone ships via DHL Express or FedEx Priority with full insurance and tracked, signature-required delivery. The watch travels in secure, discreet packaging to protect your privacy. Transit time runs 5 to 10 business days to the USA, UK, UAE, India, and Europe, and the shipping cost is included in the price.

What is the difference between the Yas Marina Circuit edition and the Pablo Mac Donough edition?+

The difference between the RM 53-01 Yas Marina Circuit edition and the RM 53-01 Pablo Mac Donough edition is the theme and the colour palette, not the case material or the movement architecture. The Yas Marina Circuit edition uses the green and yellow racing colours of the Abu Dhabi Formula 1 venue and carries applied "Yas Marina Circuit" branding on the upper bridge, while the Pablo Mac Donough edition uses the original polo colour story tied to the Argentine player. Both versions share the 49.94mm by 42.70mm NTPT carbon tonneau case, the six titanium spline screws, the polycarbonate laminate front sapphire crystal, the hand-wound skeleton movement with the tourbillon-styled exhibition at 6 o'clock, and the rubber strap with titanium deployant buckle.

What is the price difference vs the authentic Richard Mille RM 53-01?+

The authentic Richard Mille RM 53-01 trades above $900,000 on the secondary market, since Richard Mille produced the reference in extremely limited runs across the late 2010s. This super clone sells for $2,650, which delivers 98% visual and dimensional parity at roughly 0.3% of the genuine market price. Buyers receive the full RM 53-01 tonneau wrist presence and the Yas Marina Circuit racing identity without the seven-figure capital commitment.

What warranty is included with the RM 53-01 Yas Marina Circuit super clone?+

A 1-year limited warranty covers movement defects and manufacturing faults on this RM 53-01 Yas Marina Circuit super clone. Replacement parts sourcing runs through the originating factory via Super Clone Watches support. Movement servicing guidance is provided through WhatsApp and email for the lifetime of the watch.