Richard Mille RM 11-03 Super Clone : Yellow Storm Titanium Flyback Chronograph

Tonneau Case, Crown and Pusher Profile — 50mm Grade 5 Titanium Build

The Richard Mille RM 11-03 super clone carries a tonneau case measuring 50mm long by 42.70mm wide and 16.15mm thick, machined from grade 5 titanium to the curved Richard Mille silhouette that the RM 011 platform established. The bezel uses polished titanium with a satin caseband for the two-tone surface contrast Richard Mille buyers expect, and six exposed titanium spline screws lock the bezel to the central caseband and the caseback in the signature three-part construction. The crown sits at 3 o'clock with the integrated rubber torque-limit profile, and the two chronograph pushers flank the crown for the flyback start, stop, and reset sequence.

 Grade 5 Titanium Construction and Six-Spline-Screw Bezel

The full grade 5 titanium build of the RM 11-03 Yellow Storm super clone keeps the watch light on the wrist while holding the high tensile strength needed for the larger 50mm tonneau case. Grade 5 titanium, the aerospace-grade Ti-6Al-4V alloy, gives the case the matte-and-polished finish that the genuine reference carries and resists corrosion across long-term wear. The six titanium spline screws around the bezel let the case open for service without disturbing the structural alignment, and the satin caseband flows into the lugs for the continuous Richard Mille silhouette. This super clone follows the genuine titanium construction so the RM 11-03 reads correctly under close inspection on weight, surface texture, and screw alignment.

Sapphire Crystal, Sapphire Caseback and Function Selector

Scratch-resistant sapphire crystal with anti-reflective coating covers the skeletonised dial and lets full light through to the open bridges and the chronograph architecture below. The curved sapphire follows the tonneau profile and stays clear under angled light, a signature look of the RM 11-03. The sapphire caseback exposes the automatic flyback clone movement with the variable geometry rotor and the bridge layout in full view, and the function selector pusher at the 4-5 o'clock position cycles the crown function between winding, neutral, and time-setting for fast operation. The screw-down crown supports the 50-meter water resistance of the reference.

Skeletonised Dial with Yellow Accents and Chronograph Layout

The skeletonised dial of this RM 11-03 super clone shows the movement bridges, the chronograph wheels, and the gear train from the front, with no traditional dial plate covering the architecture. The open design lets the buyer read the time, the chronograph state, and the inner mechanics through the sapphire, which is the signature visual identity of every Richard Mille tonneau chronograph. Yellow accents run across the applied hour markers, the chronograph subdial chapter rings, and the chrono seconds and minutes hands, giving the Yellow Storm its distinct high-contrast colour signature against the satin grey titanium bridges.

Oversized Date, Flyback Counter, Small Seconds and Function Selector

The RM 11-03 dial layout places an oversized date window at 12 o'clock with two side-by-side digits, the 30-minute flyback chronograph counter at 4-5 o'clock with yellow accent, the small seconds register at 9 o'clock, and the four-position function selector indicator at 4-5 o'clock side for quick crown function reading. The skeleton hour and minute hands run in skeletonised baton form with luminous fill for low-light reading, and the central chronograph seconds hand carries the bright yellow tip for instant timing legibility. The applied "Richard Mille" branding sits on the upper bridge in the same applied-marker style the genuine reference uses.

Tonneau Layout, Legibility and Flyback Operation

The tonneau case shape extends the dial vertically, which gives the skeletonised display the real estate needed for the date window, the chronograph subdials, the function selector, and the seconds register without crowding the chapter ring. The flyback chronograph lets the user reset the running chronograph hand to zero with a single pusher press, which restarts the timing without the conventional stop-reset-start sequence, a feature that earned the flyback its name in aviation timing. The yellow markers and chrono accents stay legible against the open bridges through the high colour contrast, and the polished titanium bezel frames the dial without colour interference.

Swiss-Grade RMAC3 Clone Automatic Flyback Chronograph Movement

The Richard Mille RM 11-03 super clone runs on a Swiss-grade automatic flyback chronograph movement engineered to match the genuine Richard Mille RMAC3 caliber in feel, frequency, complication set, and architecture. The movement operates at 28,800 vibrations per hour, winds automatically through the variable geometry rotor, and holds a power reserve of approximately 55 hours for over two days off the wrist. The caliber drives the central hours and minutes, the small seconds at 9, the flyback chronograph with 30-minute counter at 4-5, the oversized date at 12, and the function selector across a grade 5 titanium baseplate and bridges, the same architectural choice the genuine RMAC3 uses for shock resistance and weight reduction.

Accuracy, Shock Resistance and Daily Chronograph Performance

Daily deviation holds within -4 to +6 seconds per day after factory regulation, close to the chronometer band that buyers expect from a Swiss-grade automatic flyback build. The grade 5 titanium baseplate and bridges give the movement a strong, light core that handles shock during daily wear and chronograph operation, which is the architectural reasoning behind the genuine RMAC3. The variable geometry rotor adjusts winding efficiency to the wearer's activity level and protects the winding train from over-stress during high-motion use. The 50-meter water resistance and the screw-down crown let the RM 11-03 super clone hold its seal through daily wear, hand washing, and light water contact.

Spec grid:

Yellow Rubber Strap and Titanium Folding Buckle

The RM 11-03 Yellow Storm super clone carries a yellow rubber strap that picks up the dial accent colour and ties the case to the wrist in a single colour story. The strap uses a soft, flexible rubber compound that holds its shape across long-term wear, with integrated lugs that flow into the tonneau case for the continuous Richard Mille silhouette. A titanium folding buckle closes flush against the wrist for a secure hold and lets the buyer remove the watch without flexing the strap repeatedly, with the buckle finish matched to the satin caseband for a clean visual line. The RM 11-03 Yellow Storm pairs the yellow rubber strap with the titanium case rather than a metal bracelet to keep the watch light and sport-ready.

Wrist Feel, Sizing and Comfort

The watch weighs approximately 95 grams on the full yellow rubber strap, which gives the RM 11-03 the light wrist presence buyers expect from a grade 5 titanium Richard Mille chronograph. The 50mm by 42.70mm tonneau case wears closer to a 44mm round watch on the wrist due to the curved geometry, and the 16.15mm height clears most shirt cuffs through the contoured caseband profile. The RM 11-03 super clone sits comfortably on wrists from 6.75 to 8.5 inches with the folding buckle adjusted across the strap holes, and the rubber compound stays comfortable across long wear days without sweat retention.