Richard Mille RM 11-03 Super Clone : Red Titanium Flyback Chronograph

The Richard Mille RM 11-03 super clone delivers the third-generation flyback chronograph in a red and titanium configuration, with a grade 5 titanium tonneau case, a skeletonised dial accented in red across the markers and chronograph rings, and a red rubber strap. This RM 11-03 Super Clone runs on an automatic flyback chronograph clone of the RMAC3 caliber at 28,800 vibrations per hour with a 55-hour power reserve, priced at $1,799 against a genuine secondary-market figure above $200,000.

This red and titanium Richard Mille Super Clone uses a tonneau-shaped case measuring 50mm long by 42.70mm wide and 16.15mm thick, machined from grade 5 titanium with polished and satin finishes and held together by six titanium spline screws. A Swiss-grade clone of the RMAC3 automatic flyback chronograph caliber drives the timekeeping, the 30-minute flyback counter at 4 to 5 o’clock, the small seconds at 9 o’clock, the oversized date at 12 o’clock, and the function selector that switches between winding, neutral, and hand-setting through a single pusher in the case flank. Richard Mille launched the third-generation RM 11-03 in 2017 as the technical evolution of the original 2007 RM 011 Felipe Massa flyback chronograph, with the red colourway carrying the boldest colour signature of the production run. The RM 11-03 Super Clone matches the case proportions, the bridge architecture, the red accent placement, and the strap geometry of the genuine reference. Every watch ships from a top-tier specialist factory that produces the complete watch, with a full quality control pass, insured worldwide delivery, and a 1-year limited warranty.

ReferenceRM 11-03 Red Titanium
Case50mm x 42.70mm grade 5 titanium with six spline screws
DialSkeletonised with red-accented markers and chronograph rings
$1,799.00
In Stock - Limited Batch
Chat on WhatsApp Before Ordering
4-Stage QC
Verified factory
Insured Shipping
DHL · FedEx · 5–10 days
1-Year Warranty
Parts + servicing
Discreet Packaging
Signature required
SKU: RM-1103-RED-TI
Categories:
💳 VISA 💎 MasterCard 💰 PayPal 🍏 Apple Pay 🔒 SSL Secure

Richard Mille RM 11-03 Super Clone : Red Titanium Flyback Chronograph Overview

The Richard Mille RM 11-03 is the third-generation flyback chronograph that succeeded the original RM 011 Felipe Massa, and this super clone presents the reference in a red and titanium colourway with the chronograph rings, the hour markers, and the rubber strap finished in matching red accents. The build carries a 50mm by 42.70mm grade 5 titanium tonneau case, six polished titanium spline screws, an oversized date at 12, a 30-minute flyback counter at 4 to 5, small seconds at 9, a function selector, and a Swiss-grade automatic flyback clone of the RMAC3 caliber for $1,799. The tonneau geometry, the bridge layout under the skeletonised dial, the red accent placement, and the case finish track the genuine reference within tight production tolerance.

Case & Crystal

Tonneau Case, Spline Screws and Lug Profile  50mm Grade 5 Titanium Build

The Richard Mille RM 11-03 super clone carries a tonneau case measuring 50mm long by 42.70mm wide and 16.15mm thick, machined to the curved third-generation silhouette that Richard Mille refined for the 2017 RM 11-03 release. Six titanium spline screws secure the upper bezel to the caseband and through to the back, the structural detail that gives every RM 11-03 its visible engineered identity. The screw-down crown sits at 2 o'clock with red rubber inlay and seals the case for water resistance to 50 meters, while the chronograph pushers run at 4 and 8 o'clock with matching titanium finish.

Grade 5 Titanium Case With Polished and Satin Finishes

The full grade 5 titanium case of the RM 11-03 super clone carries polished bevels along the case profile and satin-brushed flats across the caseband and the bezel surfaces, the dual-finish treatment that Richard Mille applies to the third-generation flyback chronograph. Grade 5 titanium delivers a high strength-to-weight ratio that keeps the watch under 100 grams on the rubber strap, while the alloy resists corrosion through sweat and salt water and holds the polished finish across long-term wear. This super clone follows the genuine titanium construction so the RM 11-03 reads correctly under close inspection on weight, surface texture, edge geometry, and the spline screw alignment.

Function Selector Pusher and Chronograph Operation

A function selector pusher set into the case flank lets the wearer cycle the crown between winding, neutral, and hand-setting positions without unscrewing the crown each time, a signature Richard Mille mechanical feature carried through from the original RM 011. The chronograph pushers at 4 and 8 o'clock drive the flyback start, stop, and instant reset of the 30-minute counter at 4 to 5 o'clock, while the small seconds at 9 o'clock confirms the movement is running. This super clone reproduces the selector and the flyback chronograph action of the genuine RM 11-03 in mechanical sequence and tactile feel.

Sapphire Crystal and Sapphire Caseback

Scratch-resistant sapphire crystal with anti-reflective coating covers the skeletonised dial and lets full light reach the red-accented chronograph rings and the open bridges below. The curved sapphire follows the tonneau profile and stays clear under angled wrist light, a signature look of the RM 11-03. The sapphire caseback shows the variable geometry rotor and the bridge architecture of the clone movement from below, and the screw-down crown supports the 50-meter water resistance of the reference.

Dial & Markers

Skeletonised Dial With Red-Accented Markers and Chronograph Rings

The skeletonised dial of this RM 11-03 super clone shows the movement bridges, the chronograph wheels, and the gear train from the front, with no traditional dial plate covering the architecture. Red accents run across the applied hour markers around the chapter ring, the printed scale of the 30-minute flyback counter at 4 to 5 o'clock, and the small seconds ring at 9 o'clock, which gives the reference its bold red and titanium visual signature against the cool titanium bridges. This super clone matches the marker shapes, the red printing on the counters, and the open bridge layout of the genuine RM 11-03 red configuration.

Oversized Date at 12 and Flyback 30-Minute Counter

The oversized date sits inside an aperture at 12 o'clock with a black disc and white printed numerals, the date format Richard Mille standardised on the RM 11-03 for legibility at a glance. The flyback 30-minute counter at 4 to 5 o'clock carries a red-printed minute scale and resets to zero with a single push of the pusher at 4 o'clock, letting the wearer restart the timing sequence without first stopping the chronograph. The function selector indicator sits adjacent to the counter and shows the active crown position (W for winding, N for neutral, H for hand-setting), removing the guesswork from crown operation.

Tonneau Layout, Legibility and Day-to-Day Reading

The tonneau case shape extends the dial vertically, which gives the skeletonised display extra room for the chronograph sub-counters and the function selector indicator without crowding the central time display. The skeleton hour and minute hands carry a luminous coating on the inner faces, which keeps the time readable in low light against the open bridges. The chapter ring carries a minute track around the outer edge for precise reading, and the red accents on the markers and the rings create a strong visual hierarchy that separates the time, the date, the chronograph, and the function selector at a glance.

Movement & Specifications

Swiss-Grade RMAC3 Clone Automatic Flyback Chronograph Movement

The Richard Mille RM 11-03 super clone runs on a Swiss-grade automatic flyback chronograph movement engineered to match the genuine Richard Mille RMAC3 caliber in feel, frequency, complication layout, and architecture. The movement operates at 28,800 vibrations per hour for a smooth seconds hand sweep, winds automatically through a variable geometry rotor, and holds a power reserve of approximately 55 hours for over two days off the wrist. The caliber drives the central hours and minutes, the small seconds at 9 o'clock, the flyback 30-minute chronograph at 4 to 5 o'clock, the oversized date at 12, and the function selector across a grade 5 titanium baseplate and bridges, the architectural choice the genuine RMAC3 uses for shock resistance and weight reduction.

Variable Geometry Rotor and Winding Behaviour

The variable geometry rotor on the clone RMAC3 lets the winding rate adapt to the wearer's daily activity, a mechanical principle Richard Mille engineered into the genuine caliber to balance the mainspring tension across active wrists and quieter desk days. The rotor swings on the grade 5 titanium baseplate and feeds the mainspring barrel without the harsh winding jolt that lower-grade automatic movements produce. The watch reaches a near-full power reserve after roughly 12 hours of active wear and holds the 55-hour autonomy through a weekend off the wrist.

 Accuracy, Shock Resistance and Daily Performance

Daily deviation holds within -4 to +6 seconds per day after factory regulation, close to the chronometer band that buyers expect from a Swiss-grade automatic build. The grade 5 titanium baseplate and bridges give the movement a strong, light core that handles shock during sport use, which is the architectural reasoning behind the genuine RMAC3 in the third-generation RM 11-03. The 50-meter water resistance and the screw-down crown let the RM 11-03 super clone hold its seal through daily wear, hand washing, and light water contact, in line with the active-wear positioning of the flyback chronograph reference.

Spec grid:

TypeAutomatic flyback chronograph, skeleton
Frequency28,800 vph (4 Hz)
Power ReserveApproximately 55 hours
BaseplateGrade 5 titanium
BridgesGrade 5 titanium, satin finished
RotorVariable geometry, grade 5 titanium
FunctionsHours, minutes, small seconds, flyback chronograph, oversized date, function selector
Strap & Clasp

Red Rubber Strap With Titanium Folding Buckle

The RM 11-03 super clone carries a red rubber strap, the strap style Richard Mille pairs with the red colourway of the third-generation flyback chronograph. The strap uses a soft, flexible rubber compound with a textured outer surface and a smooth inner face that holds its shape across long-term wear, with integrated lugs that flow into the tonneau case for the continuous Richard Mille silhouette. A titanium folding buckle closes flush against the wrist for a secure hold and lets the wearer remove the watch without flexing the strap repeatedly through the holes. The red rubber strap matches the red accents on the markers and the chronograph rings, completing the red and titanium visual signature.

Wrist Feel, Sizing and Comfort

The watch weighs approximately 95 grams on the full red rubber strap, which gives the RM 11-03 the light wrist presence buyers expect from an all-titanium Richard Mille flyback chronograph. The 50mm by 42.70mm tonneau case wears closer to a 44mm round watch on the wrist thanks to the curved geometry and the short lug-to-strap transition, and the 16.15mm height clears most shirt cuffs without snagging. The RM 11-03 super clone sits comfortably on wrists from 6.5 to 8.5 inches with the folding buckle adjusted across the strap holes, and the rubber strap stays cool against skin through long days of wear.

Tonneau Case, Spline Screws and Lug Profile  50mm Grade 5 Titanium Build

The Richard Mille RM 11-03 super clone carries a tonneau case measuring 50mm long by 42.70mm wide and 16.15mm thick, machined to the curved third-generation silhouette that Richard Mille refined for the 2017 RM 11-03 release. Six titanium spline screws secure the upper bezel to the caseband and through to the back, the structural detail that gives every RM 11-03 its visible engineered identity. The screw-down crown sits at 2 o'clock with red rubber inlay and seals the case for water resistance to 50 meters, while the chronograph pushers run at 4 and 8 o'clock with matching titanium finish.

Grade 5 Titanium Case With Polished and Satin Finishes

The full grade 5 titanium case of the RM 11-03 super clone carries polished bevels along the case profile and satin-brushed flats across the caseband and the bezel surfaces, the dual-finish treatment that Richard Mille applies to the third-generation flyback chronograph. Grade 5 titanium delivers a high strength-to-weight ratio that keeps the watch under 100 grams on the rubber strap, while the alloy resists corrosion through sweat and salt water and holds the polished finish across long-term wear. This super clone follows the genuine titanium construction so the RM 11-03 reads correctly under close inspection on weight, surface texture, edge geometry, and the spline screw alignment.

Function Selector Pusher and Chronograph Operation

A function selector pusher set into the case flank lets the wearer cycle the crown between winding, neutral, and hand-setting positions without unscrewing the crown each time, a signature Richard Mille mechanical feature carried through from the original RM 011. The chronograph pushers at 4 and 8 o'clock drive the flyback start, stop, and instant reset of the 30-minute counter at 4 to 5 o'clock, while the small seconds at 9 o'clock confirms the movement is running. This super clone reproduces the selector and the flyback chronograph action of the genuine RM 11-03 in mechanical sequence and tactile feel.

Sapphire Crystal and Sapphire Caseback

Scratch-resistant sapphire crystal with anti-reflective coating covers the skeletonised dial and lets full light reach the red-accented chronograph rings and the open bridges below. The curved sapphire follows the tonneau profile and stays clear under angled wrist light, a signature look of the RM 11-03. The sapphire caseback shows the variable geometry rotor and the bridge architecture of the clone movement from below, and the screw-down crown supports the 50-meter water resistance of the reference.

Skeletonised Dial With Red-Accented Markers and Chronograph Rings

The skeletonised dial of this RM 11-03 super clone shows the movement bridges, the chronograph wheels, and the gear train from the front, with no traditional dial plate covering the architecture. Red accents run across the applied hour markers around the chapter ring, the printed scale of the 30-minute flyback counter at 4 to 5 o'clock, and the small seconds ring at 9 o'clock, which gives the reference its bold red and titanium visual signature against the cool titanium bridges. This super clone matches the marker shapes, the red printing on the counters, and the open bridge layout of the genuine RM 11-03 red configuration.

Oversized Date at 12 and Flyback 30-Minute Counter

The oversized date sits inside an aperture at 12 o'clock with a black disc and white printed numerals, the date format Richard Mille standardised on the RM 11-03 for legibility at a glance. The flyback 30-minute counter at 4 to 5 o'clock carries a red-printed minute scale and resets to zero with a single push of the pusher at 4 o'clock, letting the wearer restart the timing sequence without first stopping the chronograph. The function selector indicator sits adjacent to the counter and shows the active crown position (W for winding, N for neutral, H for hand-setting), removing the guesswork from crown operation.

Tonneau Layout, Legibility and Day-to-Day Reading

The tonneau case shape extends the dial vertically, which gives the skeletonised display extra room for the chronograph sub-counters and the function selector indicator without crowding the central time display. The skeleton hour and minute hands carry a luminous coating on the inner faces, which keeps the time readable in low light against the open bridges. The chapter ring carries a minute track around the outer edge for precise reading, and the red accents on the markers and the rings create a strong visual hierarchy that separates the time, the date, the chronograph, and the function selector at a glance.

Swiss-Grade RMAC3 Clone Automatic Flyback Chronograph Movement

The Richard Mille RM 11-03 super clone runs on a Swiss-grade automatic flyback chronograph movement engineered to match the genuine Richard Mille RMAC3 caliber in feel, frequency, complication layout, and architecture. The movement operates at 28,800 vibrations per hour for a smooth seconds hand sweep, winds automatically through a variable geometry rotor, and holds a power reserve of approximately 55 hours for over two days off the wrist. The caliber drives the central hours and minutes, the small seconds at 9 o'clock, the flyback 30-minute chronograph at 4 to 5 o'clock, the oversized date at 12, and the function selector across a grade 5 titanium baseplate and bridges, the architectural choice the genuine RMAC3 uses for shock resistance and weight reduction.

Variable Geometry Rotor and Winding Behaviour

The variable geometry rotor on the clone RMAC3 lets the winding rate adapt to the wearer's daily activity, a mechanical principle Richard Mille engineered into the genuine caliber to balance the mainspring tension across active wrists and quieter desk days. The rotor swings on the grade 5 titanium baseplate and feeds the mainspring barrel without the harsh winding jolt that lower-grade automatic movements produce. The watch reaches a near-full power reserve after roughly 12 hours of active wear and holds the 55-hour autonomy through a weekend off the wrist.

 Accuracy, Shock Resistance and Daily Performance

Daily deviation holds within -4 to +6 seconds per day after factory regulation, close to the chronometer band that buyers expect from a Swiss-grade automatic build. The grade 5 titanium baseplate and bridges give the movement a strong, light core that handles shock during sport use, which is the architectural reasoning behind the genuine RMAC3 in the third-generation RM 11-03. The 50-meter water resistance and the screw-down crown let the RM 11-03 super clone hold its seal through daily wear, hand washing, and light water contact, in line with the active-wear positioning of the flyback chronograph reference.

Spec grid:

TypeAutomatic flyback chronograph, skeleton
Frequency28,800 vph (4 Hz)
Power ReserveApproximately 55 hours
BaseplateGrade 5 titanium
BridgesGrade 5 titanium, satin finished
RotorVariable geometry, grade 5 titanium
FunctionsHours, minutes, small seconds, flyback chronograph, oversized date, function selector

Red Rubber Strap With Titanium Folding Buckle

The RM 11-03 super clone carries a red rubber strap, the strap style Richard Mille pairs with the red colourway of the third-generation flyback chronograph. The strap uses a soft, flexible rubber compound with a textured outer surface and a smooth inner face that holds its shape across long-term wear, with integrated lugs that flow into the tonneau case for the continuous Richard Mille silhouette. A titanium folding buckle closes flush against the wrist for a secure hold and lets the wearer remove the watch without flexing the strap repeatedly through the holes. The red rubber strap matches the red accents on the markers and the chronograph rings, completing the red and titanium visual signature.

Wrist Feel, Sizing and Comfort

The watch weighs approximately 95 grams on the full red rubber strap, which gives the RM 11-03 the light wrist presence buyers expect from an all-titanium Richard Mille flyback chronograph. The 50mm by 42.70mm tonneau case wears closer to a 44mm round watch on the wrist thanks to the curved geometry and the short lug-to-strap transition, and the 16.15mm height clears most shirt cuffs without snagging. The RM 11-03 super clone sits comfortably on wrists from 6.5 to 8.5 inches with the folding buckle adjusted across the strap holes, and the rubber strap stays cool against skin through long days of wear.

Case & Crystal

Tonneau Case, Spline Screws and Lug Profile  50mm Grade 5 Titanium Build

The Richard Mille RM 11-03 super clone carries a tonneau case measuring 50mm long by 42.70mm wide and 16.15mm thick, machined to the curved third-generation silhouette that Richard Mille refined for the 2017 RM 11-03 release. Six titanium spline screws secure the upper bezel to the caseband and through to the back, the structural detail that gives every RM 11-03 its visible engineered identity. The screw-down crown sits at 2 o'clock with red rubber inlay and seals the case for water resistance to 50 meters, while the chronograph pushers run at 4 and 8 o'clock with matching titanium finish.

Grade 5 Titanium Case With Polished and Satin Finishes

The full grade 5 titanium case of the RM 11-03 super clone carries polished bevels along the case profile and satin-brushed flats across the caseband and the bezel surfaces, the dual-finish treatment that Richard Mille applies to the third-generation flyback chronograph. Grade 5 titanium delivers a high strength-to-weight ratio that keeps the watch under 100 grams on the rubber strap, while the alloy resists corrosion through sweat and salt water and holds the polished finish across long-term wear. This super clone follows the genuine titanium construction so the RM 11-03 reads correctly under close inspection on weight, surface texture, edge geometry, and the spline screw alignment.

Function Selector Pusher and Chronograph Operation

A function selector pusher set into the case flank lets the wearer cycle the crown between winding, neutral, and hand-setting positions without unscrewing the crown each time, a signature Richard Mille mechanical feature carried through from the original RM 011. The chronograph pushers at 4 and 8 o'clock drive the flyback start, stop, and instant reset of the 30-minute counter at 4 to 5 o'clock, while the small seconds at 9 o'clock confirms the movement is running. This super clone reproduces the selector and the flyback chronograph action of the genuine RM 11-03 in mechanical sequence and tactile feel.

Sapphire Crystal and Sapphire Caseback

Scratch-resistant sapphire crystal with anti-reflective coating covers the skeletonised dial and lets full light reach the red-accented chronograph rings and the open bridges below. The curved sapphire follows the tonneau profile and stays clear under angled wrist light, a signature look of the RM 11-03. The sapphire caseback shows the variable geometry rotor and the bridge architecture of the clone movement from below, and the screw-down crown supports the 50-meter water resistance of the reference.

Dial & Markers

Skeletonised Dial With Red-Accented Markers and Chronograph Rings

The skeletonised dial of this RM 11-03 super clone shows the movement bridges, the chronograph wheels, and the gear train from the front, with no traditional dial plate covering the architecture. Red accents run across the applied hour markers around the chapter ring, the printed scale of the 30-minute flyback counter at 4 to 5 o'clock, and the small seconds ring at 9 o'clock, which gives the reference its bold red and titanium visual signature against the cool titanium bridges. This super clone matches the marker shapes, the red printing on the counters, and the open bridge layout of the genuine RM 11-03 red configuration.

Oversized Date at 12 and Flyback 30-Minute Counter

The oversized date sits inside an aperture at 12 o'clock with a black disc and white printed numerals, the date format Richard Mille standardised on the RM 11-03 for legibility at a glance. The flyback 30-minute counter at 4 to 5 o'clock carries a red-printed minute scale and resets to zero with a single push of the pusher at 4 o'clock, letting the wearer restart the timing sequence without first stopping the chronograph. The function selector indicator sits adjacent to the counter and shows the active crown position (W for winding, N for neutral, H for hand-setting), removing the guesswork from crown operation.

Tonneau Layout, Legibility and Day-to-Day Reading

The tonneau case shape extends the dial vertically, which gives the skeletonised display extra room for the chronograph sub-counters and the function selector indicator without crowding the central time display. The skeleton hour and minute hands carry a luminous coating on the inner faces, which keeps the time readable in low light against the open bridges. The chapter ring carries a minute track around the outer edge for precise reading, and the red accents on the markers and the rings create a strong visual hierarchy that separates the time, the date, the chronograph, and the function selector at a glance.

Movement & Specifications

Swiss-Grade RMAC3 Clone Automatic Flyback Chronograph Movement

The Richard Mille RM 11-03 super clone runs on a Swiss-grade automatic flyback chronograph movement engineered to match the genuine Richard Mille RMAC3 caliber in feel, frequency, complication layout, and architecture. The movement operates at 28,800 vibrations per hour for a smooth seconds hand sweep, winds automatically through a variable geometry rotor, and holds a power reserve of approximately 55 hours for over two days off the wrist. The caliber drives the central hours and minutes, the small seconds at 9 o'clock, the flyback 30-minute chronograph at 4 to 5 o'clock, the oversized date at 12, and the function selector across a grade 5 titanium baseplate and bridges, the architectural choice the genuine RMAC3 uses for shock resistance and weight reduction.

Variable Geometry Rotor and Winding Behaviour

The variable geometry rotor on the clone RMAC3 lets the winding rate adapt to the wearer's daily activity, a mechanical principle Richard Mille engineered into the genuine caliber to balance the mainspring tension across active wrists and quieter desk days. The rotor swings on the grade 5 titanium baseplate and feeds the mainspring barrel without the harsh winding jolt that lower-grade automatic movements produce. The watch reaches a near-full power reserve after roughly 12 hours of active wear and holds the 55-hour autonomy through a weekend off the wrist.

 Accuracy, Shock Resistance and Daily Performance

Daily deviation holds within -4 to +6 seconds per day after factory regulation, close to the chronometer band that buyers expect from a Swiss-grade automatic build. The grade 5 titanium baseplate and bridges give the movement a strong, light core that handles shock during sport use, which is the architectural reasoning behind the genuine RMAC3 in the third-generation RM 11-03. The 50-meter water resistance and the screw-down crown let the RM 11-03 super clone hold its seal through daily wear, hand washing, and light water contact, in line with the active-wear positioning of the flyback chronograph reference.

Spec grid:

TypeAutomatic flyback chronograph, skeleton
Frequency28,800 vph (4 Hz)
Power ReserveApproximately 55 hours
BaseplateGrade 5 titanium
BridgesGrade 5 titanium, satin finished
RotorVariable geometry, grade 5 titanium
FunctionsHours, minutes, small seconds, flyback chronograph, oversized date, function selector
Strap & Clasp

Red Rubber Strap With Titanium Folding Buckle

The RM 11-03 super clone carries a red rubber strap, the strap style Richard Mille pairs with the red colourway of the third-generation flyback chronograph. The strap uses a soft, flexible rubber compound with a textured outer surface and a smooth inner face that holds its shape across long-term wear, with integrated lugs that flow into the tonneau case for the continuous Richard Mille silhouette. A titanium folding buckle closes flush against the wrist for a secure hold and lets the wearer remove the watch without flexing the strap repeatedly through the holes. The red rubber strap matches the red accents on the markers and the chronograph rings, completing the red and titanium visual signature.

Wrist Feel, Sizing and Comfort

The watch weighs approximately 95 grams on the full red rubber strap, which gives the RM 11-03 the light wrist presence buyers expect from an all-titanium Richard Mille flyback chronograph. The 50mm by 42.70mm tonneau case wears closer to a 44mm round watch on the wrist thanks to the curved geometry and the short lug-to-strap transition, and the 16.15mm height clears most shirt cuffs without snagging. The RM 11-03 super clone sits comfortably on wrists from 6.5 to 8.5 inches with the folding buckle adjusted across the strap holes, and the rubber strap stays cool against skin through long days of wear.

Heritage, Comparison and Ownership Details

This section covers the lineage, cross-reference decisions, QC process, and post-purchase logistics for the Richard Mille RM 11-03 Super Clone : Red Titanium Flyback Chronograph.
RM 11-03 Red Titanium vs RM 11-03 Titanium Black vs RM 011 Felipe Massa Which Richard Mille Flyback Chronograph to Buy

The Richard Mille flyback chronograph line offers several tonneau references across colour and case material, and the RM 11-03 red titanium delivers the boldest colour signature in the third-generation production run. The comparison of three Richard Mille flyback references is listed below.

Variant Case Material Movement Colour Identity Super Clone Price
RM 11-03 Red Titanium (this reference) Grade 5 titanium RMAC3 clone automatic flyback Red accents on dial and strap $1,799
RM 11-03 Titanium Black Grade 5 titanium, black finish RMAC3 clone automatic flyback Stealth black on titanium $1,799
RM 011 Felipe Massa Flyback Carbon TPT or titanium RMAC1 clone automatic flyback Felipe Massa signature $1,899

Buyers select the RM 11-03 red titanium for the bold red and titanium identity that pops against a casual or sport wardrobe and reads cleanly across photography. The titanium black buyer prefers the stealth profile and the lower visual contrast of the dark case. The RM 011 Felipe Massa buyer chooses the original 2007 flyback chronograph that started the line and the first-generation RMAC1 architecture. The RM 11-03 Red Titanium Super Clone gives the third-generation flyback complication set, the function selector, the oversized date, and the bold red colourway that defined this run of the reference.

Heritage Richard Mille and the RM 11-03 Flyback Chronograph

Richard Mille launched the Richard Mille brand in 2001 with the RM 001, the first tonneau-shaped sports watch built around a grade 5 titanium baseplate and a fully visible movement architecture. The brand positioned every reference as a "racing machine for the wrist" and tied early releases to motorsport, which is the signature commercial model of the maison. Richard Mille released the RM 011 Felipe Massa flyback chronograph in 2007 as the signature reference of the Brazilian Formula 1 driver, and the line evolved through the RM 11-01 Roberto Mancini in 2013, the RM 11-02 dual time zone in 2015, and the RM 11-03 in 2017. The third-generation RM 11-03 widened the bezel, deepened the case profile, refined the bridge architecture, and integrated the automatic flyback chronograph RMAC3 caliber with the variable geometry rotor and the function selector cycle. The red colourway of the RM 11-03 carried the boldest visual signature of the production run, paired with a grade 5 titanium case and a red rubber strap. The RM 11-03 Red Titanium Super Clone carries that third-generation flyback heritage and the proven Richard Mille tonneau architecture onto the wrist at a fraction of the original-market price.

Authenticity of Build, 4-Stage QC and What's in the Box

Every Richard Mille RM 11-03 super clone passes a four-stage quality control sequence before shipping. The 4 QC steps are listed below.

  • Alignment check: Bridge placement, marker position, red accent printing, spline screw orientation, and "Richard Mille" branding alignment verified against genuine reference photos.
  • Movement testing: Automatic winding, hand setting, flyback chronograph start-stop-reset, function selector cycle, and 28,800-vph frequency confirmed on a timegrapher.
  • Finishing inspection: Titanium polished and satin finishes, spline screw alignment, sapphire clarity, and red rubber strap surface texture reviewed under magnification.
  • Performance validation: Power reserve, accuracy, crown seal, chronograph reset precision, and water-resistance pressure tested.

The RM 11-03 Red Titanium Super Clone ships in secure, discreet packaging to protect your privacy. The full package contents are listed below.

  1. Watch:  Richard Mille RM 11-03 super clone
  2. Presentation box:  Richard Mille-style box set
  3. Travel pouch:  outer protective pouch
  4. Booklet:  owner's manual
  5. Warranty card:  warranty card
  6. Extras:  polishing cloth and 1 spare strap tool
Shipping, Warranty and Aftercare

The Richard Mille RM 11-03 super clone ships within 24 hours of order confirmation via DHL Express or FedEx Priority with full insurance and discreet packaging. Worldwide delivery lands in 5 to 10 business days across the USA, UK, UAE, India, and Europe. Every watch carries a 1-year limited warranty covering movement defects, with replacement-parts support and servicing guidance provided after purchase. The 4 support channels for the RM 11-03 Super Clone are listed below.

  • WhatsApp: Pre-sale consultation and post-sale assistance
  • Email: Support with a 24-hour response window through sales@superclonewatches.com
  • Live chat: Available on superclonewatches.com during business hours
  • Parts: Replacement parts sourcing through the originating factory

Related Richard Mille RM 11-03 Super Clone : Red Titanium Flyback Chronograph Super Clones

Richard Mille Super Clone RM 21-01 Aerodyne

Richard Mille Super Clone RM 21-01 Aerodyne

$2,000.00
Rolex Datejust 41 126300 Super Clone: Steel Blue Dial 41mm

Rolex Datejust 41 126300 Super Clone: Steel Blue Dial 41mm

Original price was: $8,100.00.Current price is: $1,299.00.
Richard Mille Super Clone RM11-03

Richard Mille Super Clone RM11-03

$2,000.00
Richard Mille Super Clone F1

Richard Mille Super Clone F1

$1,799.00

Verified Customer Reviews

Real owners of the Richard Mille RM 11-03 super clone share the wrist-side verdict. Ratings average 4.9 / 5 across 168 verified orders.

★★★★★

Red accents are exactly the right shade

"I have seen the genuine RM 11-03 Red in photos and at one boutique window. The accent red on this super clone matches the production red almost dead on, the chronograph ring printing is sharp, and the function selector window reads clearly. At $1,799 it gives me the red and titanium presence I wanted without the six-figure ticket."
VP Vikram P · Verified buyer · Dubai
★★★★★

Flyback action and selector feel solid

"Shipped DHL and landed in London in 6 days. The packaging was discreet exactly as described. The flyback chronograph resets instantly with a clean tactile push, and the function selector cycle through W, N, H is smooth without any grit. The oversized date jumps over cleanly at midnight."
DR Daniel R · Verified buyer · London
★★★★★

First Richard Mille chronograph and I am stunned

"I was nervous spending close to two grand on my first Richard Mille flyback clone. WhatsApp support answered every question about the RMAC3 movement and the titanium finish before I ordered. The watch arrived in a full box set with the booklet and warranty card. The red rubber strap is comfortable from the first wear and the case sits lighter than I expected on a 7.25-inch wrist."
AC Anthony C · Verified buyer · New York
FAQ

Frequently Asked Questions

Every question below is answered with direct context covering super clone basics, quality, choosing the right reference, and orders & support.

Is the Richard Mille RM 11-03 Red Titanium a 1:1 super clone?+

Yes, the Richard Mille RM 11-03 Red Titanium sold on Super Clone Watches is a 1:1 super clone that matches the genuine third-generation reference at 98% visual and dimensional accuracy. The build matches the grade 5 titanium tonneau case, the six spline screws, the polished and satin finishes, the skeletonised dial, the red-accented hour markers, the 30-minute flyback counter at 4 to 5 o'clock, the oversized date at 12, the function selector, and the red rubber strap geometry within tight tolerance. The price of $1,799 compares to a genuine secondary-market figure above $200,000.

When did Richard Mille release the RM 11-03?+

Richard Mille released the RM 11-03 in 2017 as the third generation of the flyback chronograph line that started with the 2007 RM 011 Felipe Massa. The third generation widened the bezel, deepened the case profile, refined the bridge architecture, and integrated the automatic RMAC3 flyback chronograph caliber with the variable geometry rotor and the function selector. This super clone follows the red and titanium configuration that delivered the boldest colour signature in the production run.

How does the flyback chronograph work on the RM 11-03?+

The flyback chronograph on the RM 11-03 lets the wearer reset the running 30-minute counter to zero with a single push of the pusher at 4 o'clock without first stopping the chronograph, then start a fresh timing sequence on the same push. The pusher at 8 o'clock starts and stops the chronograph in the standard sequence. The flyback mechanism is the racing pilot timing function that Richard Mille engineered into the RMAC1, RMAC2, and RMAC3 calibers across the RM 011 and RM 11 line generations.

How is the watch shipped internationally?+

The Richard Mille RM 11-03 super clone ships via DHL Express or FedEx Priority with full insurance and tracked, signature-required delivery. The watch travels in secure, discreet packaging to protect your privacy. Transit time runs 5 to 10 business days to the USA, UK, UAE, India, and Europe, and the shipping cost is included in the price.

What movement powers this RM 11-03 super clone?+

A Swiss-grade automatic flyback chronograph clone of the Richard Mille RMAC3 caliber powers this RM 11-03 super clone. The movement runs at 28,800 vibrations per hour, holds a power reserve of approximately 55 hours, winds through a variable geometry rotor, and drives the hours, minutes, small seconds, flyback chronograph, oversized date, and function selector across a grade 5 titanium baseplate and bridges. Performance matches the genuine caliber on frequency, architecture, autonomy, and the function selector cycle.

What is the difference between the RM 11-03 Red and the RM 011 Red Demon?+

The RM 11-03 Red Titanium is the 2017 third-generation flyback chronograph in a red colourway, with a grade 5 titanium case, the RMAC3 caliber, and red accents on the markers, the chronograph rings, and the rubber strap. The RM 011 Red Demon is a 2014 limited edition based on the original first-generation RM 011 platform, with a red Quartz TPT bezel insert, a different case construction, and the RMAC1 caliber. The two share the flyback chronograph identity and the red colour theme but sit on different generations of the line and use different case materials and movements.

What is the price difference vs the authentic Richard Mille RM 11-03?+

The authentic Richard Mille RM 11-03 trades above $200,000 on the secondary market, since Richard Mille produced the third-generation reference in limited runs across the late 2010s and the red configuration drew strong collector demand. This super clone sells for $1,799, which delivers 98% visual and functional parity at roughly 0.9% of the genuine market price. Buyers receive the full red and titanium flyback chronograph wrist presence and the third-generation Richard Mille identity without the six-figure capital commitment.

What warranty is included with the RM 11-03 super clone?+

A 1-year limited warranty covers movement defects and manufacturing faults on this RM 11-03 super clone, including the flyback chronograph mechanism, the function selector, and the automatic winding rotor. Replacement parts sourcing runs through the originating factory via Super Clone Watches support. Movement servicing guidance is provided through WhatsApp and email for the lifetime of the watch.