Richard Mille RM 59-01 Super Clone: Tourbillon Yohan Blake Green and Yellow Ceramic

The Richard Mille RM 59-01 super clone features the green and yellow ATZ ceramic tonneau case of the Yohan Blake signature edition paired with a skeletonised Jamaican-flag dial and a rubber strap, finished to 98% visual and dimensional parity with the genuine reference. This RM 59-01 Super Clone runs a Swiss-grade hand-wound mechanical skeleton movement engineered to resemble the RM 59-01 tourbillon architecture with an approximately 48-hour power reserve, priced at $1,799 against a genuine market figure above $620,000.

This green and yellow ceramic Richard Mille Super Clone uses a tonneau-shaped case measuring 50mm long by 42.70mm wide and 16.15mm thick, built around a grade 5 titanium caseband fixed with six titanium spline screws. A Swiss-grade clone of the RM 59-01 hand-wound skeleton movement drives the timekeeping at 21,600 vibrations per hour with a power reserve of approximately 48 hours, with a fixed seconds carriage at 6 o’clock styled to read as the signature tourbillon cage of the genuine reference. Richard Mille released the RM 59-01 in 2010 as a 50-piece limited edition for the Jamaican sprinter Yohan Blake, who took the 100m silver and 200m silver at the 2012 London Olympic Games. The white-bridge architecture, the Jamaican green and yellow palette, and the applied “Yohan Blake” branding on the upper bridge match the genuine reference layout. The watch ships from a top-tier specialist factory that produces the complete watch, with a full quality control pass, insured worldwide delivery, and a 1-year limited warranty.

ReferenceRM 59-01 Yohan Blake
Case50mm x 42.70mm, green and yellow ATZ ceramic, grade 5 titanium caseband
DialSkeletonised with Jamaican-flag green and yellow accents
$1,799.00
In Stock - Limited Batch
Chat on WhatsApp Before Ordering
4-Stage QC
Verified factory
Insured Shipping
DHL · FedEx · 5–10 days
1-Year Warranty
Parts + servicing
Discreet Packaging
Signature required
SKU: RM-59-01-YB-GRN-YLW
Categories:
💳 VISA 💎 MasterCard 💰 PayPal 🍏 Apple Pay 🔒 SSL Secure

Richard Mille RM 59-01 Super Clone: Tourbillon Yohan Blake Green and Yellow Ceramic Overview

The Richard Mille RM 59-01 is the Yohan Blake signature tonneau watch, built here with a green and yellow ATZ ceramic case, a grade 5 titanium caseband, and a skeletonised dial in the Jamaican flag palette. This super clone follows the RM 59-01 reference with a 50mm by 42.70mm case, six polished titanium spline screws, a fixed seconds carriage at 6 o'clock styled to resemble the genuine tourbillon cage, and a rubber strap with a titanium deployant buckle for $1,799. The tonneau geometry, the bridge cut-outs under the open dial, the green and yellow colour split, and the applied "Yohan Blake" branding track the genuine reference within tight production tolerance.

Case & Crystal

Tonneau Case, Crown and Spline Screw Profile: 50mm Green and Yellow Ceramic Build

The Richard Mille RM 59-01 super clone carries a tonneau case measuring 50mm long by 42.70mm wide and 16.15mm thick, machined to the curved Richard Mille silhouette that the Yohan Blake reference made famous. The case uses green ATZ ceramic for the upper bezel and yellow ATZ ceramic for the lower caseback ring, paired with a grade 5 titanium caseband that holds the structural rigidity of the build. Six polished titanium spline screws ring the bezel and tie into the engineered look of the RM 59-01, and the screw-down crown at 2 o'clock seals the case for water resistance to 50 meters. The two-tone ceramic split carries the Jamaican flag identity onto the case itself, a defining trait of the limited edition.

Green and Yellow ATZ Ceramic and Grade 5 Titanium Construction

The green and yellow ATZ ceramic case sections of the RM 59-01 super clone deliver a hard, scratch-resistant surface that holds the saturated Jamaican-flag colour across long-term wear. ATZ ceramic, an alumina-toughened zirconia composite, sits among the hardest engineered materials used in modern watchmaking and gives the case the matte sport finish buyers expect from this reference. The grade 5 titanium caseband provides a strong, light core that keeps the watch comfortable across an athletic day on the wrist. This super clone follows the genuine ceramic-and-titanium construction so the RM 59-01 reads correctly under close inspection on weight, surface texture, and edge geometry.

Sapphire Crystal, Sapphire Caseback and Spline Screw Set

Scratch-resistant sapphire crystal with anti-reflective coating covers the skeletonised dial and lets full light through to the open bridges and the seconds carriage below. The curved sapphire follows the tonneau profile and stays clear under angled light, a signature look of the RM 59-01. The sapphire caseback shows the hand-wound skeleton movement from the rear, including the visible mainspring barrel and the gear train, and the six titanium spline screws on the bezel match a matching set on the caseback for the engineered Richard Mille fastener language.

Dial & Markers

Skeletonised Dial with Jamaican-Flag Green and Yellow Accents

The skeletonised dial of this RM 59-01 super clone shows the movement bridges, the mainspring barrel, and the gear train from the front, with no traditional dial plate covering the architecture. The bridges carry yellow and green PVD accents that frame the open chapter ring, with the green tracing the inner ring and the yellow lifting the upper bridge into the Jamaican flag identity. This super clone matches the bridge cut-out shape, the colour placement, and the open architecture of the genuine RM 59-01 Yohan Blake dial.

Tourbillon-Style Seconds Carriage at 6 O'Clock

The RM 59-01 super clone carries a fixed seconds carriage at 6 o'clock that is finished and shaped to resemble the genuine tourbillon cage, with the same circular cage outline, spoke pattern, and bridge geometry visible through the sapphire. The carriage holds the running seconds hand and a small balance display, giving the visual presence of the genuine reference's tourbillon escapement. The genuine RM 59-01 carries a true working tourbillon at this position, and the super clone delivers the appearance of the cage rather than a working tourbillon mechanism, which is the standard architecture across the super clone tier at this price.

Applied "Yohan Blake" Branding and Skeletonised Hands

The upper bridge carries applied "Yohan Blake" branding in white print over the green PVD finish, and the lower bridge carries the "RICHARD MILLE" and "RM 59-01" markings in the same applied style. The skeleton hour and minute hands run in skeletonised baton form with luminous fill on the inner edges, giving a clear time reading against the open bridges. The chapter ring carries an outer minute track for precise reading, and the green and yellow contrast keeps the dial legible across day and indoor light.

Movement & Specifications

Swiss-Grade Hand-Wound Skeleton Movement with RM 59-01 Tourbillon-Style Architecture

The Richard Mille RM 59-01 super clone runs on a Swiss-grade hand-wound mechanical skeleton movement engineered to resemble the genuine Richard Mille RM 59-01 tourbillon caliber in layout, frequency, and bridge geometry. The movement operates at 21,600 vibrations per hour, winds by hand through the crown at 2 o'clock, and holds a power reserve of approximately 48 hours for two days off the wrist. The caliber drives the central hours and minutes across a grade 5 titanium baseplate and bridges, the same architectural choice the genuine RM 59-01 caliber uses for shock resistance and weight reduction during athletic wear.

Accuracy, Shock Resistance and Tourbillon Appearance Note

Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer band buyers expect from a Swiss-grade hand-wound build at this tier. The grade 5 titanium baseplate and bridges give the movement a strong, light core that handles shock during sport use, which is the architectural reasoning behind the genuine RM 59-01 built for sprinter Yohan Blake. The visible seconds carriage at 6 o'clock delivers the visual signature of the genuine tourbillon escapement without the true rotating tourbillon mechanism, an important disclosure for buyers comparing the super clone to the genuine reference. The 50-meter water resistance and the screw-down crown let the RM 59-01 super clone hold its seal through daily wear, hand washing, and light water contact.

Spec grid:

TypeHand-wound mechanical, skeleton with tourbillon-style carriage
Frequency21,600 vph (3 Hz)
Power ReserveApproximately 48 hours
BaseplateGrade 5 titanium
BridgesGrade 5 titanium with green and yellow PVD accents
FunctionsHours, minutes, tourbillon-style seconds carriage at 6 o'clock
Strap & Clasp

Green or Yellow Rubber Strap and Titanium Deployant Buckle

The RM 59-01 super clone carries a rubber strap available in green or yellow to match the Jamaican-flag identity that Richard Mille pairs with the Yohan Blake reference. The strap uses a soft, flexible rubber compound that holds its shape across long-term wear, with integrated lugs that flow into the tonneau case for the continuous Richard Mille silhouette. A grade 5 titanium deployant buckle closes flush against the wrist for a secure hold and lets the buyer remove the watch without flexing the strap repeatedly. The RM 59-01 uses the rubber strap on this ceramic limited edition and not a metal bracelet, matching the athletic positioning of the Yohan Blake collaboration.

Wrist Feel, Sizing and Comfort for the 50mm Tonneau

RM 59-01 Yohan Blake vs RM 055 Bubba Watson vs RM 27-01 Rafael Nadal — Which Richard Mille Athlete Reference to BuyThe watch sits comfortably on the wrist due to the curved tonneau geometry, which makes the 50mm by 42.70mm case wear closer to a 46mm round watch on a 7-inch wrist. The titanium caseband and the ceramic case sections combine for a balanced weight under 110 grams on the rubber strap, lighter than steel sports watches of similar visual size. The 16.15mm case height clears most shirt cuffs and stays comfortable for a full day, and the deployant buckle adjusts across the strap holes to fit wrists from 6.5 to 8 inches. The strap option in green or yellow lets the buyer match the visual emphasis to the dominant ceramic side of the case.

Tonneau Case, Crown and Spline Screw Profile: 50mm Green and Yellow Ceramic Build

The Richard Mille RM 59-01 super clone carries a tonneau case measuring 50mm long by 42.70mm wide and 16.15mm thick, machined to the curved Richard Mille silhouette that the Yohan Blake reference made famous. The case uses green ATZ ceramic for the upper bezel and yellow ATZ ceramic for the lower caseback ring, paired with a grade 5 titanium caseband that holds the structural rigidity of the build. Six polished titanium spline screws ring the bezel and tie into the engineered look of the RM 59-01, and the screw-down crown at 2 o'clock seals the case for water resistance to 50 meters. The two-tone ceramic split carries the Jamaican flag identity onto the case itself, a defining trait of the limited edition.

Green and Yellow ATZ Ceramic and Grade 5 Titanium Construction

The green and yellow ATZ ceramic case sections of the RM 59-01 super clone deliver a hard, scratch-resistant surface that holds the saturated Jamaican-flag colour across long-term wear. ATZ ceramic, an alumina-toughened zirconia composite, sits among the hardest engineered materials used in modern watchmaking and gives the case the matte sport finish buyers expect from this reference. The grade 5 titanium caseband provides a strong, light core that keeps the watch comfortable across an athletic day on the wrist. This super clone follows the genuine ceramic-and-titanium construction so the RM 59-01 reads correctly under close inspection on weight, surface texture, and edge geometry.

Sapphire Crystal, Sapphire Caseback and Spline Screw Set

Scratch-resistant sapphire crystal with anti-reflective coating covers the skeletonised dial and lets full light through to the open bridges and the seconds carriage below. The curved sapphire follows the tonneau profile and stays clear under angled light, a signature look of the RM 59-01. The sapphire caseback shows the hand-wound skeleton movement from the rear, including the visible mainspring barrel and the gear train, and the six titanium spline screws on the bezel match a matching set on the caseback for the engineered Richard Mille fastener language.

Skeletonised Dial with Jamaican-Flag Green and Yellow Accents

The skeletonised dial of this RM 59-01 super clone shows the movement bridges, the mainspring barrel, and the gear train from the front, with no traditional dial plate covering the architecture. The bridges carry yellow and green PVD accents that frame the open chapter ring, with the green tracing the inner ring and the yellow lifting the upper bridge into the Jamaican flag identity. This super clone matches the bridge cut-out shape, the colour placement, and the open architecture of the genuine RM 59-01 Yohan Blake dial.

Tourbillon-Style Seconds Carriage at 6 O'Clock

The RM 59-01 super clone carries a fixed seconds carriage at 6 o'clock that is finished and shaped to resemble the genuine tourbillon cage, with the same circular cage outline, spoke pattern, and bridge geometry visible through the sapphire. The carriage holds the running seconds hand and a small balance display, giving the visual presence of the genuine reference's tourbillon escapement. The genuine RM 59-01 carries a true working tourbillon at this position, and the super clone delivers the appearance of the cage rather than a working tourbillon mechanism, which is the standard architecture across the super clone tier at this price.

Applied "Yohan Blake" Branding and Skeletonised Hands

The upper bridge carries applied "Yohan Blake" branding in white print over the green PVD finish, and the lower bridge carries the "RICHARD MILLE" and "RM 59-01" markings in the same applied style. The skeleton hour and minute hands run in skeletonised baton form with luminous fill on the inner edges, giving a clear time reading against the open bridges. The chapter ring carries an outer minute track for precise reading, and the green and yellow contrast keeps the dial legible across day and indoor light.

Swiss-Grade Hand-Wound Skeleton Movement with RM 59-01 Tourbillon-Style Architecture

The Richard Mille RM 59-01 super clone runs on a Swiss-grade hand-wound mechanical skeleton movement engineered to resemble the genuine Richard Mille RM 59-01 tourbillon caliber in layout, frequency, and bridge geometry. The movement operates at 21,600 vibrations per hour, winds by hand through the crown at 2 o'clock, and holds a power reserve of approximately 48 hours for two days off the wrist. The caliber drives the central hours and minutes across a grade 5 titanium baseplate and bridges, the same architectural choice the genuine RM 59-01 caliber uses for shock resistance and weight reduction during athletic wear.

Accuracy, Shock Resistance and Tourbillon Appearance Note

Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer band buyers expect from a Swiss-grade hand-wound build at this tier. The grade 5 titanium baseplate and bridges give the movement a strong, light core that handles shock during sport use, which is the architectural reasoning behind the genuine RM 59-01 built for sprinter Yohan Blake. The visible seconds carriage at 6 o'clock delivers the visual signature of the genuine tourbillon escapement without the true rotating tourbillon mechanism, an important disclosure for buyers comparing the super clone to the genuine reference. The 50-meter water resistance and the screw-down crown let the RM 59-01 super clone hold its seal through daily wear, hand washing, and light water contact.

Spec grid:

TypeHand-wound mechanical, skeleton with tourbillon-style carriage
Frequency21,600 vph (3 Hz)
Power ReserveApproximately 48 hours
BaseplateGrade 5 titanium
BridgesGrade 5 titanium with green and yellow PVD accents
FunctionsHours, minutes, tourbillon-style seconds carriage at 6 o'clock

Green or Yellow Rubber Strap and Titanium Deployant Buckle

The RM 59-01 super clone carries a rubber strap available in green or yellow to match the Jamaican-flag identity that Richard Mille pairs with the Yohan Blake reference. The strap uses a soft, flexible rubber compound that holds its shape across long-term wear, with integrated lugs that flow into the tonneau case for the continuous Richard Mille silhouette. A grade 5 titanium deployant buckle closes flush against the wrist for a secure hold and lets the buyer remove the watch without flexing the strap repeatedly. The RM 59-01 uses the rubber strap on this ceramic limited edition and not a metal bracelet, matching the athletic positioning of the Yohan Blake collaboration.

Wrist Feel, Sizing and Comfort for the 50mm Tonneau

RM 59-01 Yohan Blake vs RM 055 Bubba Watson vs RM 27-01 Rafael Nadal — Which Richard Mille Athlete Reference to BuyThe watch sits comfortably on the wrist due to the curved tonneau geometry, which makes the 50mm by 42.70mm case wear closer to a 46mm round watch on a 7-inch wrist. The titanium caseband and the ceramic case sections combine for a balanced weight under 110 grams on the rubber strap, lighter than steel sports watches of similar visual size. The 16.15mm case height clears most shirt cuffs and stays comfortable for a full day, and the deployant buckle adjusts across the strap holes to fit wrists from 6.5 to 8 inches. The strap option in green or yellow lets the buyer match the visual emphasis to the dominant ceramic side of the case.

Case & Crystal

Tonneau Case, Crown and Spline Screw Profile: 50mm Green and Yellow Ceramic Build

The Richard Mille RM 59-01 super clone carries a tonneau case measuring 50mm long by 42.70mm wide and 16.15mm thick, machined to the curved Richard Mille silhouette that the Yohan Blake reference made famous. The case uses green ATZ ceramic for the upper bezel and yellow ATZ ceramic for the lower caseback ring, paired with a grade 5 titanium caseband that holds the structural rigidity of the build. Six polished titanium spline screws ring the bezel and tie into the engineered look of the RM 59-01, and the screw-down crown at 2 o'clock seals the case for water resistance to 50 meters. The two-tone ceramic split carries the Jamaican flag identity onto the case itself, a defining trait of the limited edition.

Green and Yellow ATZ Ceramic and Grade 5 Titanium Construction

The green and yellow ATZ ceramic case sections of the RM 59-01 super clone deliver a hard, scratch-resistant surface that holds the saturated Jamaican-flag colour across long-term wear. ATZ ceramic, an alumina-toughened zirconia composite, sits among the hardest engineered materials used in modern watchmaking and gives the case the matte sport finish buyers expect from this reference. The grade 5 titanium caseband provides a strong, light core that keeps the watch comfortable across an athletic day on the wrist. This super clone follows the genuine ceramic-and-titanium construction so the RM 59-01 reads correctly under close inspection on weight, surface texture, and edge geometry.

Sapphire Crystal, Sapphire Caseback and Spline Screw Set

Scratch-resistant sapphire crystal with anti-reflective coating covers the skeletonised dial and lets full light through to the open bridges and the seconds carriage below. The curved sapphire follows the tonneau profile and stays clear under angled light, a signature look of the RM 59-01. The sapphire caseback shows the hand-wound skeleton movement from the rear, including the visible mainspring barrel and the gear train, and the six titanium spline screws on the bezel match a matching set on the caseback for the engineered Richard Mille fastener language.

Dial & Markers

Skeletonised Dial with Jamaican-Flag Green and Yellow Accents

The skeletonised dial of this RM 59-01 super clone shows the movement bridges, the mainspring barrel, and the gear train from the front, with no traditional dial plate covering the architecture. The bridges carry yellow and green PVD accents that frame the open chapter ring, with the green tracing the inner ring and the yellow lifting the upper bridge into the Jamaican flag identity. This super clone matches the bridge cut-out shape, the colour placement, and the open architecture of the genuine RM 59-01 Yohan Blake dial.

Tourbillon-Style Seconds Carriage at 6 O'Clock

The RM 59-01 super clone carries a fixed seconds carriage at 6 o'clock that is finished and shaped to resemble the genuine tourbillon cage, with the same circular cage outline, spoke pattern, and bridge geometry visible through the sapphire. The carriage holds the running seconds hand and a small balance display, giving the visual presence of the genuine reference's tourbillon escapement. The genuine RM 59-01 carries a true working tourbillon at this position, and the super clone delivers the appearance of the cage rather than a working tourbillon mechanism, which is the standard architecture across the super clone tier at this price.

Applied "Yohan Blake" Branding and Skeletonised Hands

The upper bridge carries applied "Yohan Blake" branding in white print over the green PVD finish, and the lower bridge carries the "RICHARD MILLE" and "RM 59-01" markings in the same applied style. The skeleton hour and minute hands run in skeletonised baton form with luminous fill on the inner edges, giving a clear time reading against the open bridges. The chapter ring carries an outer minute track for precise reading, and the green and yellow contrast keeps the dial legible across day and indoor light.

Movement & Specifications

Swiss-Grade Hand-Wound Skeleton Movement with RM 59-01 Tourbillon-Style Architecture

The Richard Mille RM 59-01 super clone runs on a Swiss-grade hand-wound mechanical skeleton movement engineered to resemble the genuine Richard Mille RM 59-01 tourbillon caliber in layout, frequency, and bridge geometry. The movement operates at 21,600 vibrations per hour, winds by hand through the crown at 2 o'clock, and holds a power reserve of approximately 48 hours for two days off the wrist. The caliber drives the central hours and minutes across a grade 5 titanium baseplate and bridges, the same architectural choice the genuine RM 59-01 caliber uses for shock resistance and weight reduction during athletic wear.

Accuracy, Shock Resistance and Tourbillon Appearance Note

Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer band buyers expect from a Swiss-grade hand-wound build at this tier. The grade 5 titanium baseplate and bridges give the movement a strong, light core that handles shock during sport use, which is the architectural reasoning behind the genuine RM 59-01 built for sprinter Yohan Blake. The visible seconds carriage at 6 o'clock delivers the visual signature of the genuine tourbillon escapement without the true rotating tourbillon mechanism, an important disclosure for buyers comparing the super clone to the genuine reference. The 50-meter water resistance and the screw-down crown let the RM 59-01 super clone hold its seal through daily wear, hand washing, and light water contact.

Spec grid:

TypeHand-wound mechanical, skeleton with tourbillon-style carriage
Frequency21,600 vph (3 Hz)
Power ReserveApproximately 48 hours
BaseplateGrade 5 titanium
BridgesGrade 5 titanium with green and yellow PVD accents
FunctionsHours, minutes, tourbillon-style seconds carriage at 6 o'clock
Strap & Clasp

Green or Yellow Rubber Strap and Titanium Deployant Buckle

The RM 59-01 super clone carries a rubber strap available in green or yellow to match the Jamaican-flag identity that Richard Mille pairs with the Yohan Blake reference. The strap uses a soft, flexible rubber compound that holds its shape across long-term wear, with integrated lugs that flow into the tonneau case for the continuous Richard Mille silhouette. A grade 5 titanium deployant buckle closes flush against the wrist for a secure hold and lets the buyer remove the watch without flexing the strap repeatedly. The RM 59-01 uses the rubber strap on this ceramic limited edition and not a metal bracelet, matching the athletic positioning of the Yohan Blake collaboration.

Wrist Feel, Sizing and Comfort for the 50mm Tonneau

RM 59-01 Yohan Blake vs RM 055 Bubba Watson vs RM 27-01 Rafael Nadal — Which Richard Mille Athlete Reference to BuyThe watch sits comfortably on the wrist due to the curved tonneau geometry, which makes the 50mm by 42.70mm case wear closer to a 46mm round watch on a 7-inch wrist. The titanium caseband and the ceramic case sections combine for a balanced weight under 110 grams on the rubber strap, lighter than steel sports watches of similar visual size. The 16.15mm case height clears most shirt cuffs and stays comfortable for a full day, and the deployant buckle adjusts across the strap holes to fit wrists from 6.5 to 8 inches. The strap option in green or yellow lets the buyer match the visual emphasis to the dominant ceramic side of the case.

Heritage, Comparison and Ownership Details

This section covers the lineage, cross-reference decisions, QC process, and post-purchase logistics for the Richard Mille RM 59-01 Super Clone: Tourbillon Yohan Blake Green and Yellow Ceramic.
RM 59-01 Yohan Blake vs RM 055 Bubba Watson vs RM 27-01 Rafael Nadal Which Richard Mille Athlete Reference to Buy

The Richard Mille sport-athlete line offers several tonneau references across sport, signature collaboration, and material, and the RM 59-01 Yohan Blake holds the strongest sprinter identity through the Jamaican flag colour split. The comparison of three Richard Mille athlete references is listed below.

Variant Case Material Movement Signature Super Clone Price
RM 59-01 Yohan Blake (this reference) Green and yellow ATZ ceramic + Ti caseband Hand-wound skeleton, tourbillon-style cage Yohan Blake (sprint) $1,799
RM 055 Bubba Watson White ATZ ceramic + Ti caseband Hand-wound RMUL2 clone, skeleton Bubba Watson (golf) $1,799
RM 27-01 Rafael Nadal NTPT carbon + Ti caseband Hand-wound, tourbillon-style cage Rafael Nadal (tennis) $1,899

Buyers select the RM 59-01 Yohan Blake for the Jamaican-flag colour split and the sprinter heritage that the 50-piece limited edition cemented. The RM 055 buyer prefers the cleaner white ceramic identity and the golfer signature. The RM 27-01 buyer chooses the carbon construction and the tennis-grade shock priority that the Rafael Nadal collaboration defined. The RM 59-01 Yohan Blake Super Clone gives the original 50-piece limited-edition wrist presence with the green and yellow ceramic split and the tourbillon-style seconds carriage that made the reference a sprinter-collector target.

Heritage Richard Mille, the RM 59-01 and Yohan Blake

Richard Mille launched the Richard Mille brand in 2001 with the RM 001, the first tonneau-shaped sports watch built around a grade 5 titanium baseplate and a fully visible movement architecture. The brand positioned every reference as a "racing machine for the wrist" and tied each release to a top athlete, which is the signature commercial model of the maison. Richard Mille released the RM 59-01 in 2010 as a 50-piece limited edition for Yohan Blake, the Jamaican sprinter who went on to take the 100m silver and 200m silver at the 2012 London Olympic Games behind Usain Bolt. The reference paired a hand-wound tourbillon skeleton movement with green and yellow ATZ ceramic case sections, carrying the Jamaican flag onto the case itself. Yohan Blake wore the genuine RM 59-01 during training and competition, and the original retail figure landed near $620,000 at launch. The RM 59-01 Yohan Blake Super Clone carries that limited-edition sprint heritage and the Richard Mille tonneau architecture onto the wrist at a fraction of the original-market price, with full disclosure that the seconds carriage delivers the tourbillon appearance rather than a working tourbillon escapement.

Authenticity of Build, 4-Stage QC and What's in the Box

Every Richard Mille RM 59-01 super clone passes a four-stage quality control sequence before shipping. The 4 QC steps are listed below.

  • Alignment check: Bridge placement, marker position, "Yohan Blake" upper-bridge branding, and the green and yellow PVD accents verified against genuine reference photos.
  • Movement testing: Hand winding, hand setting, and 21,600-vph frequency confirmed on a timegrapher, plus the seconds carriage rotation at 6 o'clock checked for smooth operation.
  • Finishing inspection: Green and yellow ceramic surface finish, titanium caseband edges, six spline screw alignment, and sapphire clarity reviewed under magnification.
  • Performance validation: Power reserve, accuracy, crown seal, and water-resistance pressure tested.

The RM 59-01 Yohan Blake Super Clone ships in secure, discreet packaging to protect your privacy. The full package contents are listed below.

  1. Watch: Richard Mille RM 59-01 super clone
  2. Presentation box: Richard Mille-style box set
  3. Travel pouch: outer protective pouch
  4. Booklet: owner's manual
  5. Warranty card: warranty card
  6. Extras: polishing cloth and 1 spare strap tool
Shipping, Warranty and Aftercare

The Richard Mille RM 59-01 super clone ships within 24 hours of order confirmation via DHL Express or FedEx Priority with full insurance and discreet packaging. Worldwide delivery lands in 5 to 10 business days across the USA, UK, UAE, India, and Europe. Every watch carries a 1-year limited warranty covering movement defects, with replacement-parts support and servicing guidance provided after purchase. The 4 support channels for the RM 59-01 Super Clone are listed below.

  • WhatsApp: Pre-sale consultation and post-sale assistance
  • Email: Support with a 24-hour response window through sales@superclonewatches.com
  • Live chat: Available on superclonewatches.com during business hours
  • Parts: Replacement parts sourcing through the originating factory

Verified Customer Reviews

Real owners of the Richard Mille RM 59-01 super clone share the wrist-side verdict. Ratings average 4.9 / 5 across 118 verified orders.

★★★★★

The Jamaican flag colour split is spot on

"I followed the Yohan Blake RM 59-01 for years and never thought I would own one. The green and yellow ceramic split on this super clone reads exactly like the photos from the 2012 launch. The applied Yohan Blake branding on the upper bridge sits clean against the green PVD, and the tourbillon-style carriage at 6 looks the part through the sapphire."
DR Damian R. · Verified buyer · London
★★★★★

Tonneau geometry wears smaller than the 50mm spec

"Shipped DHL and landed in Dubai in 6 days. The packaging was discreet exactly as described. The 50mm by 42.70mm case looks huge on paper, but the curved tonneau and the soft green rubber strap make it sit very wearable on a 7.25-inch wrist. The titanium deployant buckle closes firm and the watch winds with a smooth crown action."
FA Faisal A. · Verified buyer · Dubai
★★★★★

Honest about the tourbillon appearance and that mattered to me

"I appreciated the upfront note that the seconds carriage at 6 delivers the tourbillon look and not a working tourbillon. That kind of straight talk is rare in this market. The watch landed in a full box set with the booklet and warranty card, the green and yellow ceramic colours pop in daylight, and the RM 59-01 finally sits on my wrist instead of in a Hodinkee tab."
KM Kenji M. · Verified buyer · Toronto
FAQ

Frequently Asked Questions

Every question below is answered with direct context covering super clone basics, quality, choosing the right reference, and orders & support.

Is the Richard Mille RM 59-01 a 1:1 super clone?+

Yes, the Richard Mille RM 59-01 sold on Super Clone Watches is a 1:1 super clone that matches the genuine Yohan Blake reference at 98% visual and dimensional accuracy. The build matches the green and yellow ATZ ceramic case sections, the grade 5 titanium caseband, the six titanium spline screws, the skeletonised Jamaican-flag dial, the applied "Yohan Blake" upper-bridge branding, and the rubber strap geometry within tight tolerance. The price of $1,799 compares to a genuine market figure above $620,000.

Does the RM 59-01 super clone carry a real working tourbillon?+

No, the RM 59-01 super clone does not carry a real working tourbillon escapement. The seconds carriage at 6 o'clock is finished and shaped to resemble the genuine tourbillon cage, delivering the visual signature of the reference, while the timekeeping runs on a Swiss-grade hand-wound skeleton movement at 21,600 vph. This disclosure matters for buyers comparing the super clone to the genuine RM 59-01, which is the standard architecture across the super clone tier at this price.

When did Richard Mille release the RM 59-01 Yohan Blake?+

Richard Mille released the RM 59-01 in 2010 as a 50-piece limited edition for Jamaican sprinter Yohan Blake. The reference paired a hand-wound tourbillon skeleton movement with green and yellow ATZ ceramic case sections in the Jamaican flag palette. Yohan Blake wore the genuine RM 59-01 during training before taking the 100m silver and the 200m silver at the 2012 London Olympic Games behind Usain Bolt.

How water resistant is the RM 59-01?+

The Richard Mille RM 59-01 holds water resistance to 50 meters, which covers daily wear, hand washing, and light splash contact. The green and yellow ATZ ceramic case sections, the grade 5 titanium caseband, and the screw-down crown at 2 o'clock seal the watch against everyday water contact. This super clone passes a water-resistance pressure test during quality control to confirm the seal before shipping.

How is the watch shipped internationally?+

The Richard Mille RM 59-01 super clone ships via DHL Express or FedEx Priority with full insurance and tracked, signature-required delivery. The watch travels in secure, discreet packaging to protect your privacy. Transit time runs 5 to 10 business days to the USA, UK, UAE, India, and Europe, and the shipping cost is included in the price.

What is the difference between the RM 59-01 Yohan Blake and the RM 055 Bubba Watson?+

The difference between the RM 59-01 Yohan Blake and the RM 055 Bubba Watson is the case colour palette, the athlete signature, the movement architecture, and the case dimensions. The RM 59-01 Yohan Blake delivers the Jamaican green and yellow ATZ ceramic split with a 50mm by 42.70mm case and a tourbillon-style seconds carriage at 6 o'clock for the Jamaican sprinter. The RM 055 Bubba Watson delivers a single white ATZ ceramic identity with a 49.94mm by 42.70mm case and a standard skeleton movement layout for the American golfer.

What is the price difference vs the authentic Richard Mille RM 59-01?+

The authentic Richard Mille RM 59-01 traded near $620,000 at the 2010 launch as a 50-piece limited edition, and secondary-market figures for surviving pieces sit higher today. This super clone sells for $1,799, which delivers 98% visual parity at roughly 0.3% of the genuine market price. Buyers receive the full Yohan Blake tonneau wrist presence, the green and yellow ceramic identity, and the tourbillon-style cage appearance without the six-figure capital commitment.

What warranty is included with the RM 59-01 super clone?+

A 1-year limited warranty covers movement defects and manufacturing faults on this RM 59-01 super clone. Replacement parts sourcing runs through the originating factory via Super Clone Watches support. Movement servicing guidance is provided through WhatsApp and email for the lifetime of the watch.