Richard Mille RM 011 Super Clone : Red Demon Automatic Flyback Chronograph

Tonneau Case, Crown and Spline Screw Profile — 50mm Red Quartz TPT Build

The Richard Mille RM 011 Red Demon super clone carries a tonneau case measuring 50mm long by 42.70mm wide and 16.15mm thick, machined to the curved Richard Mille silhouette that the RM 011 collection introduced in 2007. The case combines a red Quartz TPT bezel and caseback with a grade 5 titanium caseband, with six titanium spline screws fastening the bezel and matching screws holding the caseback in place. The screw-down crown at 2 o'clock seals the case for water resistance to 50 meters, and the function selector pusher integrated into the crown switches the movement between winding, neutral, and hand setting positions. The "Red Demon" inscription sits on the rehaut between the dial and the bezel, marking this variant as the red entry in the Quartz TPT Demon trilogy.

Red Quartz TPT and Grade 5 Titanium Construction

The red Quartz TPT bezel and caseback of the Red Demon super clone deliver the layered colour effect that defines the Richard Mille Quartz TPT family. Quartz TPT, short for Thin Ply Technology, layers silica filaments saturated with red-tinted resin into a stratified composite that shows visible swirling colour patterns on every machined surface, with each case carrying a unique grain that no two pieces share. The grade 5 titanium caseband provides a strong, light core that holds the case rigidity through the chronograph operation. This super clone follows the genuine TPT-and-titanium construction so the Red Demon reads correctly under close inspection on weight, on the visible red TPT layering, and on the spline screw alignment around the bezel.

Sapphire Crystal, Sapphire Caseback and Six Spline Screws

Scratch-resistant sapphire crystal with anti-reflective coating covers the skeletonised dial and follows the tonneau profile through a curved cut that stays clear under angled light. The sapphire caseback shows the automatic flyback chronograph movement from below, including the variable geometry rotor, the column wheel, and the chronograph bridges. Six titanium spline screws ring the bezel in the signature Richard Mille pattern and tie the case stack together visually and structurally. The screw-down crown supports the 50-meter water resistance of the RM 011 reference and the function selector pusher integrates flush with the crown geometry.

Skeletonised Dial with Flyback Chronograph Layout

The skeletonised dial of this RM 011 Red Demon super clone shows the movement bridges, the column wheel, and the chronograph train from the front, with red TPT accents framing the subdials and the chapter ring. The flyback chronograph layout places the 30-minute counter at the 4-5 o'clock position, the small seconds at 9 o'clock, and the oversized date window at 12, with the central chronograph seconds hand sweeping the main dial. This super clone matches the bridge cut-out shape, the red TPT colour treatment around the subdials, the satin finishing on the bridges, and the open architecture of the genuine Red Demon dial.

Oversized Date, Function Selector and White Markers

The RM 011 Red Demon carries an oversized date display at 12 o'clock, a Richard Mille signature that reads from the wrist without a magnifier and balances the dial against the lower-right chronograph counter. The function selector indicator at the 4-5 o'clock side of the case shows the current crown position with W for winding, N for neutral, and H for hand setting, so the wearer confirms the active function without guesswork. Applied white markers ring the chapter index for clean time reading against the red and skeleton background, the skeletonised baton hour and minute hands carry white luminous fill, and the printed "Richard Mille" and "Red Demon" branding finishes the dial in the same white-on-red palette.

Tonneau Layout and Chronograph Legibility

The tonneau case shape extends the dial vertically, which gives the skeletonised display extra real estate for the chronograph subdials and the date aperture. The 30-minute counter at 4-5 o'clock and the small seconds at 9 sit on opposite sides of the dial for visual balance, and the central chronograph seconds hand runs in a contrasting tone for instant reading against the skeleton background. The red TPT bezel frames the dial with the signature Red Demon colour and keeps the focus on the flyback chronograph architecture underneath.

Swiss-Grade RMAC1 Clone Automatic Flyback Chronograph

The Richard Mille RM 011 Red Demon super clone runs on a Swiss-grade automatic flyback chronograph movement engineered to match the genuine Richard Mille RMAC1 caliber in feel, frequency, and chronograph architecture. The movement operates at 28,800 vibrations per hour, winds automatically through a variable geometry rotor, and holds a power reserve of approximately 55 hours for over two days off the wrist. The flyback function lets the chronograph reset and restart from a single pusher action without stopping first, which is the operating signature of the RMAC1 caliber. The caliber drives the central hours and minutes, the small seconds at 9, the 30-minute counter at 4-5 o'clock, the oversized date at 12, and the function selector across a grade 5 titanium baseplate and bridges, the same architectural choice the genuine RMAC1 uses for shock resistance and weight reduction.

 Flyback Action, Variable Geometry Rotor and Daily Performance

The flyback action lets the wearer time consecutive intervals from a single pusher, with the chronograph hands jumping back to zero and restarting in one motion instead of the three-press stop-reset-start sequence used on standard chronographs. Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer band that buyers expect from a Swiss-grade automatic build. The variable geometry rotor adapts its winding force to the wearer's activity level, the grade 5 titanium baseplate and bridges give the movement a strong and light core that handles shock during active wear, and the 50-meter water resistance with the screw-down crown lets the Red Demon hold its seal through daily wear, hand washing, and light water contact in line with the sports-chronograph positioning of the RM 011.

Spec grid:

Red Rubber Strap and Titanium Folding Buckle

The Red Demon super clone carries a red rubber strap, the strap style Richard Mille pairs with the red Quartz TPT case to complete the colour-matched build. The strap uses a soft, flexible rubber compound that holds its shape across long-term wear, with integrated lugs that flow into the tonneau case for the continuous Richard Mille silhouette. A grade 5 titanium folding buckle closes flush against the wrist for a secure hold and lets the buyer remove the watch without flexing the strap repeatedly. The Red Demon uses the red rubber strap and titanium folding buckle on this variant in line with the genuine limited edition.

Wrist Feel, Sizing and Comfort

The watch weighs approximately 110 grams on the full red rubber strap, which gives the Red Demon a confident wrist presence without the heft of a steel chronograph. The 50mm by 42.70mm tonneau case wears closer to a 44mm round watch on the wrist due to the curved Richard Mille geometry, and the 16.15mm height accommodates most shirt cuffs once the strap is set. The RM 011 Red Demon Super Clone sits comfortably on wrists from 6.5 to 8.25 inches with the titanium folding buckle adjusted across the strap holes.