Richard Mille RM 011 FM Super Clone : Felipe Massa Titanium Limited Edition Flyback Chronograph

Tonneau Case, Crown and Lug Profile  50mm Grade 5 Titanium Build

The RM 011 FM super clone carries a tonneau case measuring 50mm long by 42.70mm wide and 16.15mm thick, machined to the curved Richard Mille silhouette that the RM 011 chronograph run made famous. The case uses grade 5 titanium across the bezel, the caseband, and the caseback ring, with polished bevels meeting satin-brushed flanks for the dual-finish identity of the Felipe Massa Limited Edition. The crown sits at 3 o'clock with a grippy rubberised insert, and the chronograph pushers flank the crown in the same tonneau-integrated style. The function selector pusher at 4-5 o'clock switches the crown between winding, neutral, and time-setting modes without removing the watch from the wrist.

Grade 5 Titanium Construction with Polished and Satin Finishing

The grade 5 titanium build of this RM 011 FM Super Clone keeps the full chronograph package under 90 grams on the rubber strap, which is the weight signature buyers expect from a titanium Richard Mille tonneau. Grade 5 titanium delivers high tensile strength, low density, and strong corrosion resistance, the same alloy specification the genuine Richard Mille reference uses across the case, the bezel, and the caseback ring. Six titanium spline screws hold the bezel to the caseband and the case to the back, with polished heads set against the satin-brushed bezel surface for visible contrast under wrist light. The polished and satin finishing follows the genuine Limited Edition treatment so the case reads correctly under close inspection on surface texture, edge geometry, and screw alignment.

Sapphire Crystal and Sapphire Caseback

Scratch-resistant sapphire crystal with anti-reflective coating covers the skeletonised dial and lets full light through to the open chronograph bridges below. The curved sapphire follows the tonneau profile and stays clear under angled light, a signature look of the RM 011 chronograph line. The sapphire caseback shows the RMAC1 clone movement from below, including the variable geometry rotor, the column wheel of the flyback chronograph, and the gear train across the grade 5 titanium baseplate. The screw-down crown and the gasketed pusher seals hold the 50-meter water resistance of the reference.

Skeletonised Dial with Open Chronograph Bridges

The skeletonised dial of this RM 011 FM Super Clone shows the chronograph bridges, the mainspring barrel, and the wheel train from the front, with no traditional dial plate covering the architecture. The open design lets the buyer read the time, the chronograph timing, and the date while watching the inner mechanics through the sapphire, which is the signature visual identity of every Richard Mille sports chronograph. This super clone matches the bridge cut-out shape, the satin finishing on the bridges, and the open layout of the genuine titanium Limited Edition.

Oversized Date at 12, Flyback 30-Minute Counter at 4-5, Small Seconds at 9

The RM 011 FM carries the four-counter display layout that defines the Felipe Massa chronograph signature. The oversized date sits in a framed double aperture at 12 o'clock for high-glance legibility, a hallmark of the Richard Mille tonneau line. The 30-minute flyback chronograph counter sits at 4-5 o'clock with a printed minute scale, the small seconds sub-dial sits at 9 o'clock, and the function selector indicator sits opposite the date to show whether the crown is in winding, neutral, or setting mode. White printed markers run around the chapter ring, and applied "Felipe Massa" limited edition branding sits on the lower bridge to confirm the limited edition configuration.

White Markers, Hands and Tonneau Legibility

White printed indices and skeleton hour and minute hands give the dial its high-contrast time reading against the satin titanium bridges underneath. The central chronograph seconds hand reads in a long, slim baton with a white tip for clear running, and the 30-minute flyback hand sits crisp in the 4-5 sub-dial. The tonneau case shape extends the dial vertically, which gives the chronograph counters extra real estate without crowding the time display. The white-on-skeleton palette keeps the focus on the chronograph layout while the titanium bezel frames the dial in monochrome.

Swiss-Grade RMAC1 Clone Automatic Flyback Chronograph Skeleton Movement

The Richard Mille RM 011 FM Super Clone runs on a Swiss-grade automatic flyback chronograph movement engineered to match the genuine Richard Mille RMAC1 caliber in feel, frequency, function set, and architecture. The movement operates at 28,800 vibrations per hour for a smooth seconds sweep, winds automatically through a variable geometry rotor, and holds a power reserve of approximately 55 hours for over two days off the wrist. The flyback chronograph resets and restarts in a single pusher press without stopping first, which is the function signature of the RMAC1 and the practical reason racing drivers chose this caliber. The caliber drives the hours, the minutes, the small seconds, the 30-minute flyback counter, the oversized date, and the function selector across a grade 5 titanium baseplate and titanium bridges.

Variable Geometry Rotor, Function Selector and Daily Performance

The variable geometry rotor lets the winding efficiency scale to the wearer's activity level, the same engineering logic Richard Mille uses on the genuine RMAC1 to keep the mainspring topped up across racing-grade arm movement. Daily deviation holds within -5 to +8 seconds per day after factory regulation, close to the chronometer band that buyers expect from a Swiss-grade automatic build. The function selector at 4-5 o'clock switches the crown between winding, neutral, and time-setting with a clear pusher click, which mirrors the practical user experience of the genuine reference. The grade 5 titanium baseplate and bridges give the movement a strong, light core that handles shock during daily wear, in line with the sport positioning of the Felipe Massa Limited Edition.

Spec grid:

 Black Rubber Strap and Titanium Folding Buckle

The RM 011 FM Super Clone carries a black rubber strap, the strap style Richard Mille pairs with the titanium Felipe Massa Limited Edition. The strap uses a soft, flexible rubber compound that holds its shape across long-term wear, with integrated lugs that flow into the tonneau case for the continuous Richard Mille silhouette. A grade 5 titanium folding buckle closes the strap flush against the wrist with a secure click and lets the buyer remove the watch without flexing the strap repeatedly. The black-on-titanium pairing follows the Limited Edition production and not a leather or two-tone variant.

Wrist Feel, Sizing and Comfort

The watch weighs approximately 88 grams on the full black rubber strap, which gives the RM 011 FM the light wrist presence buyers expect from a grade 5 titanium Richard Mille chronograph. The 50mm by 42.70mm tonneau case wears closer to a 44mm round watch on the wrist due to the curved geometry, and the 16.15mm height clears most shirt cuffs once the strap settles. The RM 011 FM Super Clone sits comfortably on wrists from 6.75 to 8.25 inches with the folding buckle adjusted across the strap holes.