Richard Mille RM 11-03 Le Mans Classic Super Clone : White ATZ Ceramic Flyback Chronograph

The Richard Mille RM 11-03 Le Mans Classic super clone features the limited edition white ATZ ceramic flyback chronograph released for the Le Mans Classic vintage racing event, finished to 98% visual and dimensional parity with the genuine reference. This RM 11-03 Le Mans Classic Super Clone runs an automatic flyback chronograph clone of the Richard Mille RMAC3 caliber at 28,800 vph with a 55-hour power reserve, priced at $1,799 against a genuine market figure above $230,000.

This white ceramic RM 11-03 Le Mans Classic Super Clone uses a tonneau case measuring 50mm by 42.70mm by 16.15mm, built around a grade 5 titanium caseband and secured by six titanium spline screws. A Swiss-grade automatic clone of the RMAC3 flyback chronograph caliber drives the timekeeping with a variable geometry rotor, a 30-minute counter at 4 to 5 o’clock, small seconds at 9 o’clock, a function selector pusher at 4 to 5 o’clock side, and an oversized date at 12 o’clock. The genuine RM 11-03 Le Mans Classic launched as a limited edition tied to the Le Mans Classic vintage endurance race held biennially at the Circuit de la Sarthe, with red and green racing accents pulled from the event identity. This super clone matches the dial architecture, the Le Mans Classic engraving on the rehaut, and the racing colour signature of the white ceramic production. The watch ships from a top-tier specialist factory that produces the complete watch, with a full quality control pass, insured worldwide delivery, and a 1-year limited warranty.

ReferenceRM 11-03 Le Mans Classic
Case50mm x 42.70mm, white ATZ ceramic, grade 5 titanium caseband
DialSkeletonised with red and green Le Mans Classic accents
$1,799.00
In Stock - Limited Batch
Chat on WhatsApp Before Ordering
4-Stage QC
Verified factory
Insured Shipping
DHL · FedEx · 5–10 days
1-Year Warranty
Parts + servicing
Discreet Packaging
Signature required
SKU: RM-1103-LMC-WHT
Categories:
💳 VISA 💎 MasterCard 💰 PayPal 🍏 Apple Pay 🔒 SSL Secure

Richard Mille RM 11-03 Le Mans Classic Super Clone : White ATZ Ceramic Flyback Chronograph Overview

The Richard Mille RM 11-03 Le Mans Classic is the limited edition flyback chronograph tied to the biennial Le Mans Classic vintage racing event, built here with a white ATZ ceramic case, a grade 5 titanium caseband, and a skeletonised dial carrying red and green Le Mans racing accents. This super clone follows the RM 11-03 Le Mans Classic reference with a 50mm by 42.70mm tonneau case, six titanium spline screws, an automatic flyback chronograph movement, and a white rubber strap with a titanium folding buckle for $1,799. The dial layout, the rehaut engraving, the oversized date, and the racing colour signature track the genuine limited edition within tight production tolerance.

Case & Crystal

Tonneau Case, Six Spline Screws and Lug Profile — 50mm White Ceramic Build

The Richard Mille RM 11-03 Le Mans Classic super clone carries a tonneau case measuring 50mm long by 42.70mm wide and 16.15mm thick, machined to the curved Richard Mille silhouette the RM 011 line introduced and the RM 11-03 generation refined. The case uses white ATZ ceramic for the bezel and caseback ring, paired with a grade 5 titanium caseband that holds the structural rigidity of the build and supports the chronograph pushers. Six grade 5 titanium spline screws ring the bezel and tie into the Richard Mille engineered look, and the screw-down crown at 3 o'clock seals the case for water resistance to 50 meters. The two chronograph pushers sit at 2 and 4 o'clock for flyback start, stop, and reset.

White ATZ Ceramic and Grade 5 Titanium Construction

The white ATZ ceramic bezel and caseback ring of this RM 11-03 Le Mans Classic super clone deliver a hard, scratch-resistant surface that holds the bright white finish across long-term wear. ATZ ceramic, an alumina-toughened zirconia composite, sits among the hardest engineered materials in modern watchmaking and gives the case the matte white finish the Le Mans Classic edition launched with. The grade 5 titanium caseband provides a strong, light core that keeps the watch under 110 grams on the rubber strap. This super clone follows the genuine ceramic-and-titanium construction so the RM 11-03 reads correctly under close inspection on weight, surface texture, edge geometry, and spline screw alignment.

Sapphire Crystal, Sapphire Caseback and Le Mans Classic Engraving

Scratch-resistant sapphire crystal with anti-reflective coating covers the skeletonised dial and lets full light through to the open chronograph architecture below. The curved sapphire follows the tonneau profile and stays clear under angled light, the signature look of the RM 11-03 generation. The sapphire caseback exposes the variable geometry rotor and the automatic flyback movement from below, and the "Le Mans Classic" engraving on the rehaut marks the watch as a limited edition tied to the vintage endurance race. The screw-down crown at 3 o'clock supports the 50-meter water resistance of the reference.

Dial & Markers

Skeletonised Dial with Le Mans Classic Racing Accents

The skeletonised dial of this RM 11-03 Le Mans Classic super clone shows the chronograph bridges, the mainspring barrel, and the gear train from the front, with no traditional dial plate covering the architecture. Red and green Le Mans Classic racing accents run across the chronograph counters, the function selector indicator, and the chapter ring, pulled directly from the visual identity of the Le Mans Classic vintage race. The open design lets the buyer read both the time and the inner mechanics through the sapphire, the signature visual identity of every Richard Mille RM 11-03 release.

Flyback Chronograph Counters, Oversized Date and Function Selector

The RM 11-03 Le Mans Classic dial carries a four-zone layout that the Richard Mille chronograph buyer recognises on sight. The 4 dial functions are listed below.

  1. Oversized date at 12 o'clock: Large date aperture for at-a-glance reading.
  2. 30-minute flyback counter at 4 to 5 o'clock: Cumulative chronograph minute total with red and green race accents.
  3. Small seconds at 9 o'clock: Continuous running seconds in skeletonised sub-dial form.
  4. Function selector indicator at 4 to 5 o'clock side: Visual confirmation of winding, neutral, or hand-setting mode through the dedicated pusher.

The skeleton hour and minute hands run in baton form against the open bridges, the applied Le Mans Classic branding sits on the upper bridge, and the central chronograph seconds hand carries a red accent that tracks the racing identity of the limited edition.

Tonneau Layout and Legibility

The tonneau case shape extends the dial vertically, which gives the skeletonised flyback display extra real estate for the four counters, the function selector, and the oversized date. The skeleton hands stay legible against the open bridges through the contrast of the green minute track and the red chronograph accents, and the white ceramic bezel frames the dial without colour interference. The Le Mans Classic engraving on the rehaut sits in clear view at the dial perimeter, which keeps the limited edition signature visible during wear.

 

Movement & Specifications

Swiss-Grade RMAC3 Clone Automatic Flyback Chronograph Movement

The Richard Mille RM 11-03 Le Mans Classic super clone runs on a Swiss-grade automatic flyback chronograph movement engineered to match the genuine Richard Mille RMAC3 caliber in feel, frequency, and architecture. The movement operates at 28,800 vibrations per hour, winds automatically through a variable geometry rotor calibrated for everyday wrist activity, and holds a power reserve of approximately 55 hours for over two days off the wrist. The caliber drives the central hours and minutes, the small seconds at 9 o'clock, the 30-minute flyback chronograph at 4 to 5 o'clock, the oversized date at 12 o'clock, and the function selector across a grade 5 titanium baseplate and bridges, the same architectural choice the genuine RMAC3 uses for shock resistance and weight reduction.

Flyback Function, Accuracy and Shock Resistance

The flyback function lets the wearer reset and restart the chronograph in a single pusher action without first stopping the running counter, the timing tool a racing driver and a track-side observer use to clock back-to-back laps. Daily deviation holds within -4 to +6 seconds per day after factory regulation, close to the chronometer band that buyers expect from a Swiss-grade automatic chronograph build. The grade 5 titanium baseplate and bridges give the movement a strong, light core that handles shock during active wear, which is the architectural reasoning behind the genuine RMAC3. The 50-meter water resistance and the screw-down crown let the RM 11-03 hold its seal through daily wear, hand washing, and light water contact, in line with the sports-chronograph positioning of the Le Mans Classic edition.

Spec grid:

TypeAutomatic flyback chronograph, skeleton
Frequency28,800 vph (4 Hz)
Power ReserveApproximately 55 hours
BaseplateGrade 5 titanium
BridgesGrade 5 titanium, satin finished
RotorVariable geometry
FunctionsHours, minutes, small seconds, flyback chronograph, oversized date, function selector
Strap & Clasp

White Rubber Strap with Le Mans Racing Accents

The RM 11-03 Le Mans Classic super clone carries a white rubber strap, the strap style Richard Mille pairs with the white ceramic Le Mans Classic edition. The strap uses a soft, flexible rubber compound that holds its shape across long-term wear, with integrated lugs that flow into the tonneau case for the continuous Richard Mille silhouette. Race-themed accents run along the strap edge in the same red and green Le Mans Classic palette used on the dial, which ties the strap visually to the limited edition identity. The Le Mans Classic edition uses the white rubber strap and not a metal bracelet.

Titanium Folding Buckle and Secure Closure

A grade 5 titanium folding buckle closes the strap flush against the wrist for a secure hold and lets the buyer remove the watch without flexing the rubber repeatedly across the lifetime of wear. The titanium buckle carries the matte finish of the case caseband, which keeps the metalwork colour consistent end to end. The folding mechanism opens and closes with a firm click that confirms the closure on the wrist.

Wrist Feel, Sizing and Comfort

The watch weighs approximately 105 grams on the full white rubber strap, which gives the RM 11-03 Le Mans Classic the light wrist presence buyers expect from a ceramic-and-titanium Richard Mille chronograph. The 50mm by 42.70mm tonneau case wears closer to a 45mm round watch on the wrist due to the curved geometry, and the 16.15mm height clears most casual shirt cuffs while sitting under a sports jacket sleeve. This RM 11-03 Super Clone sits comfortably on wrists from 6.5 to 8.25 inches with the folding buckle adjusted across the strap holes.

Tonneau Case, Six Spline Screws and Lug Profile — 50mm White Ceramic Build

The Richard Mille RM 11-03 Le Mans Classic super clone carries a tonneau case measuring 50mm long by 42.70mm wide and 16.15mm thick, machined to the curved Richard Mille silhouette the RM 011 line introduced and the RM 11-03 generation refined. The case uses white ATZ ceramic for the bezel and caseback ring, paired with a grade 5 titanium caseband that holds the structural rigidity of the build and supports the chronograph pushers. Six grade 5 titanium spline screws ring the bezel and tie into the Richard Mille engineered look, and the screw-down crown at 3 o'clock seals the case for water resistance to 50 meters. The two chronograph pushers sit at 2 and 4 o'clock for flyback start, stop, and reset.

White ATZ Ceramic and Grade 5 Titanium Construction

The white ATZ ceramic bezel and caseback ring of this RM 11-03 Le Mans Classic super clone deliver a hard, scratch-resistant surface that holds the bright white finish across long-term wear. ATZ ceramic, an alumina-toughened zirconia composite, sits among the hardest engineered materials in modern watchmaking and gives the case the matte white finish the Le Mans Classic edition launched with. The grade 5 titanium caseband provides a strong, light core that keeps the watch under 110 grams on the rubber strap. This super clone follows the genuine ceramic-and-titanium construction so the RM 11-03 reads correctly under close inspection on weight, surface texture, edge geometry, and spline screw alignment.

Sapphire Crystal, Sapphire Caseback and Le Mans Classic Engraving

Scratch-resistant sapphire crystal with anti-reflective coating covers the skeletonised dial and lets full light through to the open chronograph architecture below. The curved sapphire follows the tonneau profile and stays clear under angled light, the signature look of the RM 11-03 generation. The sapphire caseback exposes the variable geometry rotor and the automatic flyback movement from below, and the "Le Mans Classic" engraving on the rehaut marks the watch as a limited edition tied to the vintage endurance race. The screw-down crown at 3 o'clock supports the 50-meter water resistance of the reference.

Skeletonised Dial with Le Mans Classic Racing Accents

The skeletonised dial of this RM 11-03 Le Mans Classic super clone shows the chronograph bridges, the mainspring barrel, and the gear train from the front, with no traditional dial plate covering the architecture. Red and green Le Mans Classic racing accents run across the chronograph counters, the function selector indicator, and the chapter ring, pulled directly from the visual identity of the Le Mans Classic vintage race. The open design lets the buyer read both the time and the inner mechanics through the sapphire, the signature visual identity of every Richard Mille RM 11-03 release.

Flyback Chronograph Counters, Oversized Date and Function Selector

The RM 11-03 Le Mans Classic dial carries a four-zone layout that the Richard Mille chronograph buyer recognises on sight. The 4 dial functions are listed below.

  1. Oversized date at 12 o'clock: Large date aperture for at-a-glance reading.
  2. 30-minute flyback counter at 4 to 5 o'clock: Cumulative chronograph minute total with red and green race accents.
  3. Small seconds at 9 o'clock: Continuous running seconds in skeletonised sub-dial form.
  4. Function selector indicator at 4 to 5 o'clock side: Visual confirmation of winding, neutral, or hand-setting mode through the dedicated pusher.

The skeleton hour and minute hands run in baton form against the open bridges, the applied Le Mans Classic branding sits on the upper bridge, and the central chronograph seconds hand carries a red accent that tracks the racing identity of the limited edition.

Tonneau Layout and Legibility

The tonneau case shape extends the dial vertically, which gives the skeletonised flyback display extra real estate for the four counters, the function selector, and the oversized date. The skeleton hands stay legible against the open bridges through the contrast of the green minute track and the red chronograph accents, and the white ceramic bezel frames the dial without colour interference. The Le Mans Classic engraving on the rehaut sits in clear view at the dial perimeter, which keeps the limited edition signature visible during wear.

 

Swiss-Grade RMAC3 Clone Automatic Flyback Chronograph Movement

The Richard Mille RM 11-03 Le Mans Classic super clone runs on a Swiss-grade automatic flyback chronograph movement engineered to match the genuine Richard Mille RMAC3 caliber in feel, frequency, and architecture. The movement operates at 28,800 vibrations per hour, winds automatically through a variable geometry rotor calibrated for everyday wrist activity, and holds a power reserve of approximately 55 hours for over two days off the wrist. The caliber drives the central hours and minutes, the small seconds at 9 o'clock, the 30-minute flyback chronograph at 4 to 5 o'clock, the oversized date at 12 o'clock, and the function selector across a grade 5 titanium baseplate and bridges, the same architectural choice the genuine RMAC3 uses for shock resistance and weight reduction.

Flyback Function, Accuracy and Shock Resistance

The flyback function lets the wearer reset and restart the chronograph in a single pusher action without first stopping the running counter, the timing tool a racing driver and a track-side observer use to clock back-to-back laps. Daily deviation holds within -4 to +6 seconds per day after factory regulation, close to the chronometer band that buyers expect from a Swiss-grade automatic chronograph build. The grade 5 titanium baseplate and bridges give the movement a strong, light core that handles shock during active wear, which is the architectural reasoning behind the genuine RMAC3. The 50-meter water resistance and the screw-down crown let the RM 11-03 hold its seal through daily wear, hand washing, and light water contact, in line with the sports-chronograph positioning of the Le Mans Classic edition.

Spec grid:

TypeAutomatic flyback chronograph, skeleton
Frequency28,800 vph (4 Hz)
Power ReserveApproximately 55 hours
BaseplateGrade 5 titanium
BridgesGrade 5 titanium, satin finished
RotorVariable geometry
FunctionsHours, minutes, small seconds, flyback chronograph, oversized date, function selector

White Rubber Strap with Le Mans Racing Accents

The RM 11-03 Le Mans Classic super clone carries a white rubber strap, the strap style Richard Mille pairs with the white ceramic Le Mans Classic edition. The strap uses a soft, flexible rubber compound that holds its shape across long-term wear, with integrated lugs that flow into the tonneau case for the continuous Richard Mille silhouette. Race-themed accents run along the strap edge in the same red and green Le Mans Classic palette used on the dial, which ties the strap visually to the limited edition identity. The Le Mans Classic edition uses the white rubber strap and not a metal bracelet.

Titanium Folding Buckle and Secure Closure

A grade 5 titanium folding buckle closes the strap flush against the wrist for a secure hold and lets the buyer remove the watch without flexing the rubber repeatedly across the lifetime of wear. The titanium buckle carries the matte finish of the case caseband, which keeps the metalwork colour consistent end to end. The folding mechanism opens and closes with a firm click that confirms the closure on the wrist.

Wrist Feel, Sizing and Comfort

The watch weighs approximately 105 grams on the full white rubber strap, which gives the RM 11-03 Le Mans Classic the light wrist presence buyers expect from a ceramic-and-titanium Richard Mille chronograph. The 50mm by 42.70mm tonneau case wears closer to a 45mm round watch on the wrist due to the curved geometry, and the 16.15mm height clears most casual shirt cuffs while sitting under a sports jacket sleeve. This RM 11-03 Super Clone sits comfortably on wrists from 6.5 to 8.25 inches with the folding buckle adjusted across the strap holes.

Case & Crystal

Tonneau Case, Six Spline Screws and Lug Profile — 50mm White Ceramic Build

The Richard Mille RM 11-03 Le Mans Classic super clone carries a tonneau case measuring 50mm long by 42.70mm wide and 16.15mm thick, machined to the curved Richard Mille silhouette the RM 011 line introduced and the RM 11-03 generation refined. The case uses white ATZ ceramic for the bezel and caseback ring, paired with a grade 5 titanium caseband that holds the structural rigidity of the build and supports the chronograph pushers. Six grade 5 titanium spline screws ring the bezel and tie into the Richard Mille engineered look, and the screw-down crown at 3 o'clock seals the case for water resistance to 50 meters. The two chronograph pushers sit at 2 and 4 o'clock for flyback start, stop, and reset.

White ATZ Ceramic and Grade 5 Titanium Construction

The white ATZ ceramic bezel and caseback ring of this RM 11-03 Le Mans Classic super clone deliver a hard, scratch-resistant surface that holds the bright white finish across long-term wear. ATZ ceramic, an alumina-toughened zirconia composite, sits among the hardest engineered materials in modern watchmaking and gives the case the matte white finish the Le Mans Classic edition launched with. The grade 5 titanium caseband provides a strong, light core that keeps the watch under 110 grams on the rubber strap. This super clone follows the genuine ceramic-and-titanium construction so the RM 11-03 reads correctly under close inspection on weight, surface texture, edge geometry, and spline screw alignment.

Sapphire Crystal, Sapphire Caseback and Le Mans Classic Engraving

Scratch-resistant sapphire crystal with anti-reflective coating covers the skeletonised dial and lets full light through to the open chronograph architecture below. The curved sapphire follows the tonneau profile and stays clear under angled light, the signature look of the RM 11-03 generation. The sapphire caseback exposes the variable geometry rotor and the automatic flyback movement from below, and the "Le Mans Classic" engraving on the rehaut marks the watch as a limited edition tied to the vintage endurance race. The screw-down crown at 3 o'clock supports the 50-meter water resistance of the reference.

Dial & Markers

Skeletonised Dial with Le Mans Classic Racing Accents

The skeletonised dial of this RM 11-03 Le Mans Classic super clone shows the chronograph bridges, the mainspring barrel, and the gear train from the front, with no traditional dial plate covering the architecture. Red and green Le Mans Classic racing accents run across the chronograph counters, the function selector indicator, and the chapter ring, pulled directly from the visual identity of the Le Mans Classic vintage race. The open design lets the buyer read both the time and the inner mechanics through the sapphire, the signature visual identity of every Richard Mille RM 11-03 release.

Flyback Chronograph Counters, Oversized Date and Function Selector

The RM 11-03 Le Mans Classic dial carries a four-zone layout that the Richard Mille chronograph buyer recognises on sight. The 4 dial functions are listed below.

  1. Oversized date at 12 o'clock: Large date aperture for at-a-glance reading.
  2. 30-minute flyback counter at 4 to 5 o'clock: Cumulative chronograph minute total with red and green race accents.
  3. Small seconds at 9 o'clock: Continuous running seconds in skeletonised sub-dial form.
  4. Function selector indicator at 4 to 5 o'clock side: Visual confirmation of winding, neutral, or hand-setting mode through the dedicated pusher.

The skeleton hour and minute hands run in baton form against the open bridges, the applied Le Mans Classic branding sits on the upper bridge, and the central chronograph seconds hand carries a red accent that tracks the racing identity of the limited edition.

Tonneau Layout and Legibility

The tonneau case shape extends the dial vertically, which gives the skeletonised flyback display extra real estate for the four counters, the function selector, and the oversized date. The skeleton hands stay legible against the open bridges through the contrast of the green minute track and the red chronograph accents, and the white ceramic bezel frames the dial without colour interference. The Le Mans Classic engraving on the rehaut sits in clear view at the dial perimeter, which keeps the limited edition signature visible during wear.

 

Movement & Specifications

Swiss-Grade RMAC3 Clone Automatic Flyback Chronograph Movement

The Richard Mille RM 11-03 Le Mans Classic super clone runs on a Swiss-grade automatic flyback chronograph movement engineered to match the genuine Richard Mille RMAC3 caliber in feel, frequency, and architecture. The movement operates at 28,800 vibrations per hour, winds automatically through a variable geometry rotor calibrated for everyday wrist activity, and holds a power reserve of approximately 55 hours for over two days off the wrist. The caliber drives the central hours and minutes, the small seconds at 9 o'clock, the 30-minute flyback chronograph at 4 to 5 o'clock, the oversized date at 12 o'clock, and the function selector across a grade 5 titanium baseplate and bridges, the same architectural choice the genuine RMAC3 uses for shock resistance and weight reduction.

Flyback Function, Accuracy and Shock Resistance

The flyback function lets the wearer reset and restart the chronograph in a single pusher action without first stopping the running counter, the timing tool a racing driver and a track-side observer use to clock back-to-back laps. Daily deviation holds within -4 to +6 seconds per day after factory regulation, close to the chronometer band that buyers expect from a Swiss-grade automatic chronograph build. The grade 5 titanium baseplate and bridges give the movement a strong, light core that handles shock during active wear, which is the architectural reasoning behind the genuine RMAC3. The 50-meter water resistance and the screw-down crown let the RM 11-03 hold its seal through daily wear, hand washing, and light water contact, in line with the sports-chronograph positioning of the Le Mans Classic edition.

Spec grid:

TypeAutomatic flyback chronograph, skeleton
Frequency28,800 vph (4 Hz)
Power ReserveApproximately 55 hours
BaseplateGrade 5 titanium
BridgesGrade 5 titanium, satin finished
RotorVariable geometry
FunctionsHours, minutes, small seconds, flyback chronograph, oversized date, function selector
Strap & Clasp

White Rubber Strap with Le Mans Racing Accents

The RM 11-03 Le Mans Classic super clone carries a white rubber strap, the strap style Richard Mille pairs with the white ceramic Le Mans Classic edition. The strap uses a soft, flexible rubber compound that holds its shape across long-term wear, with integrated lugs that flow into the tonneau case for the continuous Richard Mille silhouette. Race-themed accents run along the strap edge in the same red and green Le Mans Classic palette used on the dial, which ties the strap visually to the limited edition identity. The Le Mans Classic edition uses the white rubber strap and not a metal bracelet.

Titanium Folding Buckle and Secure Closure

A grade 5 titanium folding buckle closes the strap flush against the wrist for a secure hold and lets the buyer remove the watch without flexing the rubber repeatedly across the lifetime of wear. The titanium buckle carries the matte finish of the case caseband, which keeps the metalwork colour consistent end to end. The folding mechanism opens and closes with a firm click that confirms the closure on the wrist.

Wrist Feel, Sizing and Comfort

The watch weighs approximately 105 grams on the full white rubber strap, which gives the RM 11-03 Le Mans Classic the light wrist presence buyers expect from a ceramic-and-titanium Richard Mille chronograph. The 50mm by 42.70mm tonneau case wears closer to a 45mm round watch on the wrist due to the curved geometry, and the 16.15mm height clears most casual shirt cuffs while sitting under a sports jacket sleeve. This RM 11-03 Super Clone sits comfortably on wrists from 6.5 to 8.25 inches with the folding buckle adjusted across the strap holes.

Heritage, Comparison and Ownership Details

This section covers the lineage, cross-reference decisions, QC process, and post-purchase logistics for the Richard Mille RM 11-03 Le Mans Classic Super Clone : White ATZ Ceramic Flyback Chronograph.
RM 11-03 Le Mans Classic vs RM 11-03 NTPT Carbon vs RM 011 Felipe Massa Which Richard Mille Chronograph to Buy

The Richard Mille chronograph line offers several tonneau references across material and signature edition, and the RM 11-03 Le Mans Classic white ceramic holds the cleanest race-themed visual identity. The comparison of three Richard Mille chronograph references is listed below.

Variant Case Material Movement Signature Super Clone Price
RM 11-03 Le Mans Classic White Ceramic (this reference) White ATZ ceramic + Ti caseband RMAC3 clone automatic flyback Le Mans Classic event $1,799
RM 11-03 NTPT Carbon Black NTPT carbon + Ti caseband RMAC3 clone automatic flyback Standard RM 11-03 $1,799
RM 011 Felipe Massa Various (Ti, RG, ceramic) RMAC1 clone automatic flyback Felipe Massa $1,899

Buyers select the RM 11-03 Le Mans Classic for the white ceramic case paired with the red and green racing accents that tie the watch to the Le Mans Classic vintage endurance race. The NTPT carbon buyer prefers the lightweight black tonneau profile and the standard RM 11-03 dial language. The RM 011 buyer chooses the Felipe Massa signature and the earlier RMAC1 chronograph caliber that opened the Richard Mille chronograph line in 2007. This RM 11-03 Le Mans Classic Super Clone gives the original limited edition tonneau proportions with the skeleton flyback architecture and the race-themed colour signature that made the reference a collector target.

Heritage Richard Mille, the RM 011 / RM 11-03 Chronograph Line, and the Le Mans Classic Event

Richard Mille launched the Richard Mille brand in 2001 with the RM 001, the first tonneau-shaped sports watch built around a grade 5 titanium baseplate and a fully visible movement architecture. The brand positioned every reference as a "racing machine for the wrist" and tied each release to motorsport or sport athlete partnerships, the signature commercial model of the maison. Richard Mille released the RM 011 Felipe Massa flyback chronograph in 2007 as the first automatic chronograph in the catalogue, and the RM 11-03 generation followed in 2016 with a redesigned tonneau case, an oversized date at 12 o'clock, and a dedicated function selector pusher. The Le Mans Classic edition arrived as a limited release tied to the Le Mans Classic vintage endurance race held biennially at the Circuit de la Sarthe in France, the same circuit that hosts the 24 Hours of Le Mans. The white ceramic Le Mans Classic edition delivered the cleanest visual variant of the limited run, paired with the RMAC3 automatic flyback caliber, the variable geometry rotor, and the red and green racing accents on the skeletonised dial. The RM 11-03 Le Mans Classic Super Clone carries that Le Mans heritage and the proven RM 11-03 chronograph architecture onto the wrist at a fraction of the original-market price.

Authenticity of Build, 4-Stage QC and What's in the Box

Every Richard Mille RM 11-03 Le Mans Classic super clone passes a four-stage quality control sequence before shipping. The 4 QC steps are listed below.

  • Alignment check: Bridge placement, counter position, oversized date aperture, function selector indicator, and Le Mans Classic rehaut engraving verified against genuine reference photos.
  • Movement testing: Automatic winding, hand setting, flyback chronograph start-stop-reset action, and 28,800-vph frequency confirmed on a timegrapher.
  • Finishing inspection: Ceramic surface finish, titanium caseband edges, six spline screw alignment, pusher action, and sapphire clarity reviewed under magnification.
  • Performance validation: Power reserve, accuracy, crown seal, chronograph pusher seal, and water-resistance pressure tested.

The RM 11-03 Le Mans Classic Super Clone ships in secure, discreet packaging to protect your privacy. The full package contents are listed below.

  1. Watch:  Richard Mille RM 11-03 Le Mans Classic super clone
  2. Presentation box:  Richard Mille-style box set
  3. Travel pouch:  outer protective pouch
  4. Booklet:  owner's manual
  5. Warranty card:  warranty card
  6. Extras:  polishing cloth and 1 spare strap tool
Shipping, Warranty and Aftercare

The Richard Mille RM 11-03 Le Mans Classic super clone ships within 24 hours of order confirmation via DHL Express or FedEx Priority with full insurance and discreet packaging. Worldwide delivery lands in 5 to 10 business days across the USA, UK, UAE, India, and Europe. Every watch carries a 1-year limited warranty covering movement defects and the flyback chronograph mechanism, with replacement-parts support and servicing guidance provided after purchase. The 4 support channels for this RM 11-03 Super Clone are listed below.

  • WhatsApp: Pre-sale consultation and post-sale assistance
  • Email: Support with a 24-hour response window through sales@superclonewatches.com
  • Live chat: Available on superclonewatches.com during business hours
  • Parts: Replacement parts sourcing through the originating factory

Related Richard Mille RM 11-03 Le Mans Classic Super Clone : White ATZ Ceramic Flyback Chronograph Super Clones

Richard Mille Super Clone Felipe Massa

Richard Mille Super Clone Felipe Massa

$1,799.00
Richard Mille Super Clone Flyback Chronograph RM011-03

Richard Mille Super Clone Flyback Chronograph RM011-03

$1,799.00
Richard Mille Super Clone Hommage

Richard Mille Super Clone Hommage

$1,799.00
Richard Mille Super Clone RM11-03 Titanium White

Richard Mille Super Clone RM11-03 Titanium White

$1,799.00

Verified Customer Reviews

Real owners of the Richard Mille RM 11-03 Le Mans Classic super clone share the wrist-side verdict. Ratings average 4.9 / 5 across 168 verified orders.

★★★★★

The Le Mans Classic dial is exactly what I wanted

"I follow the Le Mans Classic event every other year and have wanted the RM 11-03 Le Mans Classic since the limited run sold out. This super clone has the red and green accents in the right places, the oversized date at 12 sits clean, and the Le Mans Classic engraving on the rehaut is sharp. At $1,799 the limited edition lands on my wrist instead of staying out of reach."
PM Pierre M · Verified buyer · Paris
★★★★★

Flyback chronograph works exactly like the boutique piece

"The flyback pusher resets the running chronograph and restarts in a single action, which is what I checked first since other clones skip this. The white ATZ ceramic feels hard and smooth, the six spline screws line up correctly, and the titanium folding buckle clicks shut with a firm hold. Shipped DHL to London in 6 days with full tracking."
DR David R · Verified buyer · London
★★★★★

First Richard Mille chronograph and the wrist presence is real

"I was nervous about the 50mm size on paper but the curved tonneau and the light rubber strap make the RM 11-03 wear closer to a 45mm round watch on my 7.25-inch wrist. WhatsApp support answered every question about the flyback movement and the Le Mans Classic edition before I ordered. Box set arrived in discreet packaging with the warranty card and booklet inside."
KA Khalid A · Verified buyer · Dubai
FAQ

Frequently Asked Questions

Every question below is answered with direct context covering super clone basics, quality, choosing the right reference, and orders & support.

Is the Richard Mille RM 11-03 Le Mans Classic a 1:1 super clone?+

Yes, the Richard Mille RM 11-03 Le Mans Classic sold on Super Clone Watches is a 1:1 super clone that matches the genuine limited edition at 98% visual and dimensional accuracy. The build matches the white ATZ ceramic bezel and caseback ring, the grade 5 titanium caseband, the six titanium spline screws, the skeletonised dial with red and green Le Mans Classic racing accents, the oversized date at 12 o'clock, the 30-minute flyback counter at 4 to 5 o'clock, the small seconds at 9 o'clock, the function selector pusher, the Le Mans Classic rehaut engraving, and the white rubber strap geometry within tight tolerance. The price of $1,799 compares to a genuine market figure above $230,000.

Does the flyback chronograph reset and restart in a single pusher action?+

Yes, the flyback chronograph on this RM 11-03 Le Mans Classic super clone resets and restarts in a single pusher action without first stopping the running counter. The flyback function is the racing-timing complication the Le Mans Classic edition celebrates, designed for back-to-back lap timing during endurance racing. Factory testing confirms the flyback action through the start-stop-reset cycle on every unit before shipping.

When did Richard Mille release the RM 11-03 Le Mans Classic edition?+

Richard Mille released the RM 11-03 generation in 2016 as the successor to the RM 011 chronograph line, and the Le Mans Classic limited edition followed as a tie-in to the Le Mans Classic vintage endurance race held biennially at the Circuit de la Sarthe. The white ATZ ceramic version carries the cleanest race-themed visual identity of the limited run, paired with red and green Le Mans Classic accents pulled from the event branding.

How is the watch shipped internationally?+

The Richard Mille RM 11-03 Le Mans Classic super clone ships via DHL Express or FedEx Priority with full insurance and tracked, signature-required delivery. The watch travels in secure, discreet packaging to protect your privacy. Transit time runs 5 to 10 business days to the USA, UK, UAE, India, and Europe, and the shipping cost is included in the price.

What movement powers this RM 11-03 Le Mans Classic super clone?+

A Swiss-grade automatic flyback chronograph clone of the Richard Mille RMAC3 caliber powers this RM 11-03 Le Mans Classic super clone. The movement runs at 28,800 vibrations per hour, winds automatically through a variable geometry rotor, and holds a power reserve of approximately 55 hours. The caliber drives the central hours and minutes, the small seconds at 9 o'clock, the 30-minute flyback chronograph at 4 to 5 o'clock, the oversized date at 12 o'clock, and the function selector across a grade 5 titanium baseplate and bridges.

What is the difference between the RM 11-03 Le Mans Classic and the standard RM 11-03 NTPT Carbon?+

The difference between the RM 11-03 Le Mans Classic and the standard RM 11-03 NTPT Carbon is the case material, the dial accents, and the rehaut engraving, not the movement or the chronograph layout. The Le Mans Classic edition uses white ATZ ceramic with red and green race accents and a Le Mans Classic engraving on the rehaut, while the NTPT Carbon version uses black layered carbon with standard dial accents and no event engraving. Both share the 50mm by 42.70mm tonneau case, the grade 5 titanium caseband, the six spline screws, the RMAC3 clone automatic flyback movement, and the white rubber strap.

What is the price difference vs the authentic Richard Mille RM 11-03 Le Mans Classic?+

The authentic Richard Mille RM 11-03 Le Mans Classic trades above $230,000 on the secondary market, since Richard Mille produced the limited edition in a small numbered run tied to the Le Mans Classic event. This super clone sells for $1,799, which delivers 98% visual and functional parity at under 1% of the genuine market price. Buyers receive the full Le Mans Classic tonneau wrist presence and the white ceramic flyback chronograph identity without the multi-hundred-thousand-dollar capital commitment.

What warranty is included with this RM 11-03 Le Mans Classic super clone?+

A 1-year limited warranty covers movement defects, the flyback chronograph mechanism, and manufacturing faults on this RM 11-03 Le Mans Classic super clone. Replacement parts sourcing runs through the originating factory via Super Clone Watches support. Movement servicing guidance is provided through WhatsApp and email for the lifetime of the watch.